i cant reach home brew in my terminal. it says zsh: command not found: brew
@andreelb2 ай бұрын
2024 : npm install was failing for me. I was able to get to the next step by downgrading node: brew install node@18 brew unlink node brew link node@18 node -v still haven't got video out. I succeeded a year ago but not since then
@SoFlyDrones2 ай бұрын
For those who have issues with the last command working, you can also try this command: node index.js -o | ffplay -i - -analyzeduration 1 -probesize 32 -sync ext
@gwen85983 ай бұрын
Hi do you know if it works for 24-inch iMac Apple M1 Chip ?
@gwen85983 ай бұрын
Because I don't want start something It doesn't work and also I can't go back in my last computer set 😟😕
@oculararcade4 ай бұрын
Flight time on Tinyhawk III?
@exohypnosis4 ай бұрын
after this my mac stoped to use usb ports : charger and else ,please send me how to uninstall all this progs thru terminal *((
@zserfvgyhn4 ай бұрын
stuck at npm install, getting a bunch of errors. do you mind updating this tutorial??
@irwinngАй бұрын
Good day. I have the same problem it pop up a lot of errors while trying to npm install. Have you found any solution?
@VeeFPV4 ай бұрын
It didn't worked for me :(
@danielhakim81786 ай бұрын
I can't install the npm , it show error, why
@JonathanPlasse9 ай бұрын
Merci pour la présentation
@vlogdofpv9 ай бұрын
Estou com esse Erro: node:internal/modules/cjs/loader:1147 throw err; ^ Error: Cannot find module 'usb' Require stack: - /Users/user/voc-poc/index.js at Module._resolveFilename (node:internal/modules/cjs/loader:1144:15) at Module._load (node:internal/modules/cjs/loader:985:27) at Module.require (node:internal/modules/cjs/loader:1235:19) at require (node:internal/modules/helpers:176:18) at Object.<anonymous> (/Users/user/voc-poc/index.js:1:13) at Module._compile (node:internal/modules/cjs/loader:1376:14) at Module._extensions..js (node:internal/modules/cjs/loader:1435:10) at Module.load (node:internal/modules/cjs/loader:1207:32) at Module._load (node:internal/modules/cjs/loader:1023:12) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:135:12) { code: 'MODULE_NOT_FOUND', requireStack: [ '/Users/user/voc-poc/index.js' ] }
@jace26349 ай бұрын
If anyone else has the sd card problem , you have to format it to FAT32 or whatever format it's not in while it's not working
@aliffsherafgan52459 ай бұрын
Simple question but almost 8 minutes to answer? Someone pls tell me if the gopro 8 works well with reelsteady without soft mount
@KlngsRC10 ай бұрын
how long can it go with the goggles
@ryanservice3741 Жыл бұрын
getting a load of errors when i sue npm install in the voc-poc directory, not sure why I've tried updating what I can!
@wendycrabtree5336 Жыл бұрын
Cool!
@skairkrow9800 Жыл бұрын
I want to get into FPV but I wear glasses and can't find a starter kit that will work with glasses. 8(
@PitsFlyingEye Жыл бұрын
great thing ,BUT at 8:20 i couldnt read what ou wrote in the command line ??
@jimithesaintkl Жыл бұрын
Mine just lurches forward. It’s unflyable.
@ThatRed4Runner Жыл бұрын
Awesome video man! Subscribed!
@eprohoda Жыл бұрын
wow~totla awesome ~ :)
@mitsuvlog2021 Жыл бұрын
Good and stable flight! You are a good drone operator, I could enjoy watching this nice video!
@para9111 Жыл бұрын
Almost nobody does outside range tests on Tiny whoops thanks.Keep it up.
@alexfreeland292 Жыл бұрын
id say this is an amazing quad. The only problem is that the wire that connects from the motherboard to the camera is Solderd on the motherboard. Because of this, my friend lightly tapped the drone against a wall. he flew it for like 10 flights before and barley crashed it. We could solder it back on but we didn't want to break it so he just had to return it. its a super fast drone and is amazing otherwise.
@SimpleAb859 Жыл бұрын
i have a question,did u use a camera to recording inside the camera drone? because i expected ur camera drone wasn't clear
@mattwellein1829 Жыл бұрын
I bought a th3 about 3 weeks ago and am loving it! However, I'm getting literally less than 20% of your usable range - how are you achieving this wizardry to go so far and still have that clear video? Mine turns to horizontal white static and crazy jumbles before I'd reach 9:07 in your video. Then I'd be completely blind by 9:15, yet you continue flying AWAY from yourself for another 50 seconds after that! This video makes me seriously think my th3 is broken/defective in some way... I've tried running at your exact vtx specs and also at 200 power, seems to make no difference. :(
@olivercurras1187 Жыл бұрын
you can change the mhw of the camera delivery yours might be set to the standard 25 but you can up it to 200 in the setting
@mattwellein1829 Жыл бұрын
@@olivercurras1187 I was running 200. I snagged some lollipop 4 rhcp antenna and one truerc patch for when I'm outdoors and that made all the difference in the world, much more like your example (but still a bit worse for sure). The stock antenna truly hold this rtf kit back tremendously, atleast it's not too expensive to upgrade them though. Thanks for your reply :)
@rafa84612 Жыл бұрын
brew not found . HElpp
@auraaerials Жыл бұрын
thanks for the great video. unfortunately i have errors everywhere after npm install... what could be the reason?
@filipdoubrava Жыл бұрын
same here
@PhillGraaf Жыл бұрын
UUHHFFFF amazing. How do you do it? Do you just put your throttle to 0 and spin it while it is falling?
@SoFlyDrones Жыл бұрын
Thanks! Yes exactly. Or at least low throttle.
@PhillGraaf Жыл бұрын
wow... I will have to try that soon. Would be amazing if it works... Do you have to type all this code again next time when you want to connect though??
@stickboyfpv4742 Жыл бұрын
3:45 dude THANK YOUUU for this!!!!! The simplest thing that I overlooked...... On the 50 mbps my video was way worse than 25mbps...... BECAUSE I WAS ON PUBLIC....! Thank you my friend!!
@AlexVolgin Жыл бұрын
Doesn't work with my MacBook Pro (14-inch, 2021)
@dronemyride Жыл бұрын
Does it work with Dji Goggles 2 (Not the V2).... Anyone?
@mathieu.tourangeau Жыл бұрын
I tried but I couldn't pass through npm i usb. it doesn't create a node_modules/usb directory and then nodegyp does not compile of course. Let me know if you find a workaround.
@mathieu.tourangeau Жыл бұрын
I can do most of the commands. but at 6:40 when it's time to npm install the 3 dependencies, I got the error that the usb node module does not get installed. I'm a recent node js developper and I usually developp on Windows. Not OSX so I'm not so familiar with osx. I just bought my first MacBook Air M1 in January.
@rawfa2776 Жыл бұрын
@@mathieu.tourangeau hello, I am having same problem, where you able to resolve this issue?
@mathieu.tourangeau Жыл бұрын
@@rawfa2776 no. I wasn’t able to by pass this error.
@theearthisbread Жыл бұрын
This review got me to buy the th3. Absolutely love flying it indoors, outdoors is a bit dissapointing on 1s. Until you put it on 2s outdoors. With emax 350 mah 2s lipo’s, its super fun outdoors as there is no risk involved when you accidentally crash. You only have to change the pid to 2 and it will work nicely.
@Depzzz_ Жыл бұрын
u can use a 2s on this ?!
@theearthisbread Жыл бұрын
@@Depzzz_ yes you can, i’ve been doing it for months and it still holds up. Emax also confirms this. The only reason a 2s lipo isn’t included in the box is because 2s is just far too advanced for a beginner.
@mattwellein1829 Жыл бұрын
Do you have any prop recommendations for use on 2s?
@olivercurras1187 Жыл бұрын
How could I get the 2s battery through the PH, connector I am new to the hobby and want to try out a 2s but I don't know what to do and what I need
@theearthisbread Жыл бұрын
@@olivercurras1187 you need an emax 350 mah 2s lipo. That lipo has a ph 2 connector. Set the pid profile to 2.
@franciscolezcano7441 Жыл бұрын
Awesome footage! i love this video because i recently got this drone, can i ask you something? i'm using a hero 7 black, which softmount is that? i really need that for reelsteady but i can't find it for this drone.
@SoFlyDrones Жыл бұрын
I get my mounts from Brain3D
@everythingfilms Жыл бұрын
is there anything you did for the quality of the dvr ? mine cuts out even when in the googles its fine and it just seems random. I don't know if its the sd card im using, I'm using a recommended 16gb class 10 but yours is like so good. I go behind anything and its bad chopping out in the dvr but when flying in googles its fine. If someone could help me out that would be amazing !
@theearthisbread Жыл бұрын
I think he isn’t using the included goggles. Its a known problem that the dvr flashes whenever it distorts in the signal on these goggles. The amount of range he gets in this video is also impossible on the stock antennas, he probably uses the expensive fatshark goggles.
@everythingfilms Жыл бұрын
@The Earth Is Bread well I can get full football field in both directions and its really good in the goggles for me its just the dvr and like even just a foot away it starts cutting out in the recording, will get better ones eventually would have been nice if this worked good though because of the removable screen, its kinda nice, say for watching back, and if people with you want to watch. I dont need to get as far as him just he shows the kit and made it look like he was using the emax goggles so was just wondering if he did anything to improve the performance of them.
@theearthisbread Жыл бұрын
@@everythingfilms yeah i also thought at first that he was using the th 3 goggles aswell but i realized he didn’t thanks to the clean dvr and other yourubers had the same problem. Couldn’t find any fix for it either as i have the same issue. Too bad because its a nice screen for sure and different goggles are very expensive.
@everythingfilms Жыл бұрын
@The Earth Is Bread yeah is a bummer thanks for the reply, good to know
@christhorney Жыл бұрын
i just orderd one of these hopefully it will arrive in the next couple of days, i only have a dji mini 2 so the fpv drones will be tough to get used to so i wanted something small i can fly around in the shed for a while to get the hang of it before i get something bigger, i think ill get the tinyhawk freestyle 2 for my second fpv drone for a step up before getting a crux35. i almost brought the crux35 but i downloaded a free simulator and yeah wow its tough, so i thought i better get something that wont damage shit when i crash it a billion times getting the hang of it lol, plus the weather were im at ill prob be stuck inside the shed most the time and i need something thats not going to dint and scratch cars and bikes in the shed when i crash into them lol hopefully ill be ok i have been getting the hang of the simulator i think i will be fine, start slow and work my way up. plus because i wear glasses im not really sure im going to be able to use the goggles i wanted the fall back of being able to mount the screen to the controller incase im not able to see with the goggles on. if i cant use the goggles im going to try to figure out a way to use a bigger monitor that wont introduce a bunch of latency
@egyptianuavpilot Жыл бұрын
You are producing amazing FPV Videos buddy ,,,, keep it up and good luck ,,,,, already subscribed ,,,,,,
@villadante Жыл бұрын
Ive done everything you said and it looked like it worked fine until the end, when the video does not appear and i get this last line: nan M-V: nan fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
@AmielDeGuzman Жыл бұрын
I was getting this issue too! I can't seem to get to fix it. Did you find a solution?
@geraldwhiteman2700 Жыл бұрын
man when you had the drone pointing at the mirror, that was the coolest thing. idk why thought but still, lol
@JonR35 Жыл бұрын
Notice it has smaller motors than the th2
@nsbob70 Жыл бұрын
That was a cool video! I actually shazammed, then downloaded that cool song! (Mikey Geiger, "walkin' and talkin') cool selection man! Oh, and very impressed with that tiny single cell powered drone can do, wow!
@crank_FPV Жыл бұрын
was the trick mainly just tilting the gopro back more so you had a more wide filed of view along with the sky? thanks! just started playing with my gopro and on the fpv
@SoFlyDrones Жыл бұрын
I'd say that definitely helps yes. Just adjust the tilt depending on how fast you are planning to fly. Really fast you will need to tilt up quite a lot so you aren't filming the ground the entire time.
@RafaelFozzi Жыл бұрын
This solution is AMAZING! It works perfectly!!!! Thank you so much... Subscribed
@SoFlyDrones Жыл бұрын
Glad it worked for you!
@TTV-VoidGG Жыл бұрын
Will this work for DJI Fpv Combo?
@SoFlyDrones Жыл бұрын
I believe it should, but can't say for sure
@Lift33d Жыл бұрын
yay it worked
@Lift33d Жыл бұрын
I hope this works
@arthurnascimento8372 Жыл бұрын
Tenho um kit desse. Qual outro drone eu posso comprar pra dar um upgrade, usando o mesmo rádio e DVR? Obrigado
@SoFlyDrones Жыл бұрын
You can use the video receiver and goggles with any drone that transmits video with analog. For the controller, I don't think you can get it to work with any other drone.
@defrand9722 жыл бұрын
I got it to work at the begin but when i close terminal and open it again it wont open the viewer when i input the last command shown in the video description. Anyone can help?
@SoFlyDrones Жыл бұрын
You can try entering in all the commands again from start to finish
@Jonners2 жыл бұрын
So after doing all this, every time I want to use it, do I just open terminal and just paste that last selection of code? Surely I don't have to do all this every time? Thanks
Пікірлер
i cant reach home brew in my terminal. it says zsh: command not found: brew
2024 : npm install was failing for me. I was able to get to the next step by downgrading node: brew install node@18 brew unlink node brew link node@18 node -v still haven't got video out. I succeeded a year ago but not since then
For those who have issues with the last command working, you can also try this command: node index.js -o | ffplay -i - -analyzeduration 1 -probesize 32 -sync ext
Hi do you know if it works for 24-inch iMac Apple M1 Chip ?
Because I don't want start something It doesn't work and also I can't go back in my last computer set 😟😕
Flight time on Tinyhawk III?
after this my mac stoped to use usb ports : charger and else ,please send me how to uninstall all this progs thru terminal *((
stuck at npm install, getting a bunch of errors. do you mind updating this tutorial??
Good day. I have the same problem it pop up a lot of errors while trying to npm install. Have you found any solution?
It didn't worked for me :(
I can't install the npm , it show error, why
Merci pour la présentation
Estou com esse Erro: node:internal/modules/cjs/loader:1147 throw err; ^ Error: Cannot find module 'usb' Require stack: - /Users/user/voc-poc/index.js at Module._resolveFilename (node:internal/modules/cjs/loader:1144:15) at Module._load (node:internal/modules/cjs/loader:985:27) at Module.require (node:internal/modules/cjs/loader:1235:19) at require (node:internal/modules/helpers:176:18) at Object.<anonymous> (/Users/user/voc-poc/index.js:1:13) at Module._compile (node:internal/modules/cjs/loader:1376:14) at Module._extensions..js (node:internal/modules/cjs/loader:1435:10) at Module.load (node:internal/modules/cjs/loader:1207:32) at Module._load (node:internal/modules/cjs/loader:1023:12) at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:135:12) { code: 'MODULE_NOT_FOUND', requireStack: [ '/Users/user/voc-poc/index.js' ] }
If anyone else has the sd card problem , you have to format it to FAT32 or whatever format it's not in while it's not working
Simple question but almost 8 minutes to answer? Someone pls tell me if the gopro 8 works well with reelsteady without soft mount
how long can it go with the goggles
getting a load of errors when i sue npm install in the voc-poc directory, not sure why I've tried updating what I can!
Cool!
I want to get into FPV but I wear glasses and can't find a starter kit that will work with glasses. 8(
great thing ,BUT at 8:20 i couldnt read what ou wrote in the command line ??
Mine just lurches forward. It’s unflyable.
Awesome video man! Subscribed!
wow~totla awesome ~ :)
Good and stable flight! You are a good drone operator, I could enjoy watching this nice video!
Almost nobody does outside range tests on Tiny whoops thanks.Keep it up.
id say this is an amazing quad. The only problem is that the wire that connects from the motherboard to the camera is Solderd on the motherboard. Because of this, my friend lightly tapped the drone against a wall. he flew it for like 10 flights before and barley crashed it. We could solder it back on but we didn't want to break it so he just had to return it. its a super fast drone and is amazing otherwise.
i have a question,did u use a camera to recording inside the camera drone? because i expected ur camera drone wasn't clear
I bought a th3 about 3 weeks ago and am loving it! However, I'm getting literally less than 20% of your usable range - how are you achieving this wizardry to go so far and still have that clear video? Mine turns to horizontal white static and crazy jumbles before I'd reach 9:07 in your video. Then I'd be completely blind by 9:15, yet you continue flying AWAY from yourself for another 50 seconds after that! This video makes me seriously think my th3 is broken/defective in some way... I've tried running at your exact vtx specs and also at 200 power, seems to make no difference. :(
you can change the mhw of the camera delivery yours might be set to the standard 25 but you can up it to 200 in the setting
@@olivercurras1187 I was running 200. I snagged some lollipop 4 rhcp antenna and one truerc patch for when I'm outdoors and that made all the difference in the world, much more like your example (but still a bit worse for sure). The stock antenna truly hold this rtf kit back tremendously, atleast it's not too expensive to upgrade them though. Thanks for your reply :)
brew not found . HElpp
thanks for the great video. unfortunately i have errors everywhere after npm install... what could be the reason?
same here
UUHHFFFF amazing. How do you do it? Do you just put your throttle to 0 and spin it while it is falling?
Thanks! Yes exactly. Or at least low throttle.
wow... I will have to try that soon. Would be amazing if it works... Do you have to type all this code again next time when you want to connect though??
3:45 dude THANK YOUUU for this!!!!! The simplest thing that I overlooked...... On the 50 mbps my video was way worse than 25mbps...... BECAUSE I WAS ON PUBLIC....! Thank you my friend!!
Doesn't work with my MacBook Pro (14-inch, 2021)
Does it work with Dji Goggles 2 (Not the V2).... Anyone?
I tried but I couldn't pass through npm i usb. it doesn't create a node_modules/usb directory and then nodegyp does not compile of course. Let me know if you find a workaround.
I can do most of the commands. but at 6:40 when it's time to npm install the 3 dependencies, I got the error that the usb node module does not get installed. I'm a recent node js developper and I usually developp on Windows. Not OSX so I'm not so familiar with osx. I just bought my first MacBook Air M1 in January.
@@mathieu.tourangeau hello, I am having same problem, where you able to resolve this issue?
@@rawfa2776 no. I wasn’t able to by pass this error.
This review got me to buy the th3. Absolutely love flying it indoors, outdoors is a bit dissapointing on 1s. Until you put it on 2s outdoors. With emax 350 mah 2s lipo’s, its super fun outdoors as there is no risk involved when you accidentally crash. You only have to change the pid to 2 and it will work nicely.
u can use a 2s on this ?!
@@Depzzz_ yes you can, i’ve been doing it for months and it still holds up. Emax also confirms this. The only reason a 2s lipo isn’t included in the box is because 2s is just far too advanced for a beginner.
Do you have any prop recommendations for use on 2s?
How could I get the 2s battery through the PH, connector I am new to the hobby and want to try out a 2s but I don't know what to do and what I need
@@olivercurras1187 you need an emax 350 mah 2s lipo. That lipo has a ph 2 connector. Set the pid profile to 2.
Awesome footage! i love this video because i recently got this drone, can i ask you something? i'm using a hero 7 black, which softmount is that? i really need that for reelsteady but i can't find it for this drone.
I get my mounts from Brain3D
is there anything you did for the quality of the dvr ? mine cuts out even when in the googles its fine and it just seems random. I don't know if its the sd card im using, I'm using a recommended 16gb class 10 but yours is like so good. I go behind anything and its bad chopping out in the dvr but when flying in googles its fine. If someone could help me out that would be amazing !
I think he isn’t using the included goggles. Its a known problem that the dvr flashes whenever it distorts in the signal on these goggles. The amount of range he gets in this video is also impossible on the stock antennas, he probably uses the expensive fatshark goggles.
@The Earth Is Bread well I can get full football field in both directions and its really good in the goggles for me its just the dvr and like even just a foot away it starts cutting out in the recording, will get better ones eventually would have been nice if this worked good though because of the removable screen, its kinda nice, say for watching back, and if people with you want to watch. I dont need to get as far as him just he shows the kit and made it look like he was using the emax goggles so was just wondering if he did anything to improve the performance of them.
@@everythingfilms yeah i also thought at first that he was using the th 3 goggles aswell but i realized he didn’t thanks to the clean dvr and other yourubers had the same problem. Couldn’t find any fix for it either as i have the same issue. Too bad because its a nice screen for sure and different goggles are very expensive.
@The Earth Is Bread yeah is a bummer thanks for the reply, good to know
i just orderd one of these hopefully it will arrive in the next couple of days, i only have a dji mini 2 so the fpv drones will be tough to get used to so i wanted something small i can fly around in the shed for a while to get the hang of it before i get something bigger, i think ill get the tinyhawk freestyle 2 for my second fpv drone for a step up before getting a crux35. i almost brought the crux35 but i downloaded a free simulator and yeah wow its tough, so i thought i better get something that wont damage shit when i crash it a billion times getting the hang of it lol, plus the weather were im at ill prob be stuck inside the shed most the time and i need something thats not going to dint and scratch cars and bikes in the shed when i crash into them lol hopefully ill be ok i have been getting the hang of the simulator i think i will be fine, start slow and work my way up. plus because i wear glasses im not really sure im going to be able to use the goggles i wanted the fall back of being able to mount the screen to the controller incase im not able to see with the goggles on. if i cant use the goggles im going to try to figure out a way to use a bigger monitor that wont introduce a bunch of latency
You are producing amazing FPV Videos buddy ,,,, keep it up and good luck ,,,,, already subscribed ,,,,,,
Ive done everything you said and it looked like it worked fine until the end, when the video does not appear and i get this last line: nan M-V: nan fd= 0 aq= 0KB vq= 0KB sq= 0B f=0/0
I was getting this issue too! I can't seem to get to fix it. Did you find a solution?
man when you had the drone pointing at the mirror, that was the coolest thing. idk why thought but still, lol
Notice it has smaller motors than the th2
That was a cool video! I actually shazammed, then downloaded that cool song! (Mikey Geiger, "walkin' and talkin') cool selection man! Oh, and very impressed with that tiny single cell powered drone can do, wow!
was the trick mainly just tilting the gopro back more so you had a more wide filed of view along with the sky? thanks! just started playing with my gopro and on the fpv
I'd say that definitely helps yes. Just adjust the tilt depending on how fast you are planning to fly. Really fast you will need to tilt up quite a lot so you aren't filming the ground the entire time.
This solution is AMAZING! It works perfectly!!!! Thank you so much... Subscribed
Glad it worked for you!
Will this work for DJI Fpv Combo?
I believe it should, but can't say for sure
yay it worked
I hope this works
Tenho um kit desse. Qual outro drone eu posso comprar pra dar um upgrade, usando o mesmo rádio e DVR? Obrigado
You can use the video receiver and goggles with any drone that transmits video with analog. For the controller, I don't think you can get it to work with any other drone.
I got it to work at the begin but when i close terminal and open it again it wont open the viewer when i input the last command shown in the video description. Anyone can help?
You can try entering in all the commands again from start to finish
So after doing all this, every time I want to use it, do I just open terminal and just paste that last selection of code? Surely I don't have to do all this every time? Thanks