I started this channel to share my builds and pasion with my Cars specially the Honda CRX , but also I will upload random videos from everyday live or when I capture something that I like to share. Im new to KZread since 2023.
I started this channel because of the Honda CRX ED 9 that I own since 1999.
Also I want to feature some of my other cars.
thank you for checking out my page.
Пікірлер
Thanks for no crap music!!! Just got my 2006 Ridgie and knew there had to be a Cabin Air Filter...
You welcome. 🤗 Part of a learning experience making these videos . Sadly I don’t get enough feedback to improve my videos.
I CANNOT STAND THESE D@MN CRAP MUSIC VIDS!!!!!
Thanks for this video. It's not something I need at the moment but I own a ridgeline so it's useful to know.
Mine just started this randomly . And the tailgate not working sideways is just painful. Lol a feature you get used to very fast .
Good job bro 👍
Thank you so much 😀
@@gdm_crx8513 welcome my brother
💯💪👍❤️🚘⛽️🙏🔥🚀🐐
Thank you
@@gdm_crx8513 welcome my brother
Cool build. Im picking up an ee8 vti next month. And I sure am contemplating putting a k20 in it.
Go for it . At least you have some information for your build . If you need extra help instagram GDM_CRX Message me there. If I look back at mine and I would had all the parts up front for the build . You possibly have it up and running in a week . But a lot of time goes by ordering parts and figuring out what to use . It’s a lot of work . But hopefully worth it. I got mine running as of this week . Hanging behind on the videos from the build. But I try to upload one at least per week . With the parts that I got and were to buy . And hope that will help you with your build .
@@gdm_crx8513 cool man. yeah information is worth its weight in gold with these swaps. your videos will deff. help! 🙏
👍⛽️🚘💪💯🐐🔥🚀
Thanks 🙏
@@gdm_crx8513 welcome my brother
Thats weird, the hasport K series mount for ef/crx should fit without modifications. Do you talk with hasport?
I think that the EE8 are a lil bit different of other ef chasis haha
Yes I spoke to hasport. The mounts are for ef/ed crx only . Not for EE /Si . Maybe they will make on one day but as of now they never had a chassis to produce one . EE8 here in Europe has a b16a engine (v-tec) OEM parts were motor mounts sit are different. Therefore hasport mounts don’t fit . The few k20 that exist here in Europe I spoke to them and they did the same or similar . Not everyone used the same mounts . One of my earlier videos I do explain the difference. I was not aware of this myself when I started the project . If my solution is the correct one we will see when I get the car rolling.
Awesome video. Makes it seem like it wasn’t too bad. Gonna get the same top soon here.
Thank you , trying my best . I have 2 more for the top , the stand and oem rear catcher bracket . Were I take it all apart again . To the top . Love it it’s holding up great. Need to do some more s2000 content but trying to get the crx done at this time .
@@gdm_crx8513 I’ll be waiting for new videos to come out. 👍
🔥 🔥 🔥
Audi S2?
Yes , caught on fire during the 2024 24hour race Nürburgring.
The ep3 axles should just be able to side in right out of the box. You need rsx type s half shaft out of base model 5 spd or 6spd.
Did not fit. Was 3/4 short on Passenger side . Not sure why. Because EE8 ? Maybe the driveshafts I got were not ep3 ? Even I was told they were.
Also the dc5 axles will work but you need the karcepts hubs or yonaka 36mm hubs like type r to fit these axles. You can also watch youngstatic on KZread he is a ef crx guy like us that swaps k swap all day
I do follow him . My biggest thing is that I did not find anyone that . Step by step instructions how to do it . And if they did they don’t tell you what parts and where to get them from . That’s why o started this. But because I’m constantly waiting on parts my step my step is messed up to and I continue on other sections. Basically when it’s all done you have the information on all parts that needed or could be . My 10k build is already at 16k just from basic parts that I did not had or were not included in the engine purchase.
Also youngstatic works on ef chassis. The EE8 v-tec is different many parts don’t fit . Like engine mounts need to be modified .
Nice one bro 👍 👍 👍
Thanks ✌️
@@gdm_crx8513 welcome brother
🔥🔥🔥
If you don’t mind me asking how much u got the ridgeline for , I’m trying to get one in talks with a seller as we speak facebook market place!,,
I got a 2013 RTL with only 100k miles . Bought it sadly from a dealer . Paid 17k (dealer did ask 19.9 for it . I did look at a few others privat sellers were asking around 15k for same year but 150k miles. I was looking for 3 month until I found this one. Not sure if I overpaid , but also got tired of trying to fiend the perfect one .
You can add spacer to the 3 bolt on the back of the transmission to even out the alignment.
I know they make them for the s2000 ap1 ap2 but did not know they make them for the dc5 or ep3. I did look for them could not find the right ones . Do you know who makes them ? Or sells them ?
I thought i seen in one episode one guy used a blow torch to touch his bumper up and it went back to a factory look! I don't know I'd try that though. :)
The trim panels fit right back? Mine panels didn’t fit anymore after the hardtop
Yes . It’s a bit tricky to snap back in . In case you have the OEM rear catcher bracket . You unscrew the brush . And then it fits . Check out the rear catcher video from me .
@@gdm_crx8513 I don’t think I got the oem rear catchers just the metal plate that came with the mug men style top
Then it should fit . They go right over the metal brackets. Did not had a problem reinstalling them .
@@gdm_crx8513 ok. Ima try tomorrow since it’s like 12am here where im at. The car looks ugly without those trims lol
Yeah , they should fit . Hope my video was helpful for the install .
Hey they sell a zink weldable primer I recommend using it on the frame and inside mount to keep things from rusting 👍
Did not know that. Thank you . I covered as much as o could with the zink primer . And did multiple paint and clear . Hoping it will hold up . One day engine bay will be redone . But right now I’m focusing on getting the engine up and running .
@@gdm_crx8513 I understand that I try to keep my project cars on the road as much as possible and do the repairs as I go. Just did complete suspension arms balljoints bushings tie rod inner/outer then just did clutch timing belt pump front main seal and oil pan on my 88crx si next about to do liner on the inside put back together and bodywork/paint as I drive so one panel at a time with blocked primer lol
I hope I get this one here on the road . Feels more like spending time ordering parts . Just so much little stuff that’s holding up the project .
Молодца !!!
Thank you .
The amber/orange rear lights look so much better than the pure red ones.
thank you , yes I think to it looks better
cabin filter is easy changed. Don't let it deter you. That is also a potential water retension if it is not cleaned properly.
Thanks . Haven’t changed it yet. But I’m sure it can’t be to hard .
It is easy. Use a flat head screwdriver to remove the clips on each side if the glove box, move the plastic part that keeps the glove box from falling when open, open the glove box all the way, and the door to thr filter is right there. Very easy.
the drain in the bed is clogged. Water should not stay in there.
I will check up on that . Only noticed it since the cover is on .
❤
Why the music🤔😵💫🤔
Part of a leaning experience making videos . Maybe I will redo the video on day without the music. Thank you for the feedback.
Great video. Like others have said, the music drowned out your commentary. Very distracting. But it's a learning experience. We all have to start somewhere. Love my gen 1! Thanks!
Shenanigans with Sascha!! Saschanigans!!!
😂 didn’t think of that. Need to remember for mast time
i have the same hardtop. i'm gonna have to build me a stand.
Check out the PVC one I build . Works great. Best $70 I spent .
Honda power 🔥🔥🔥
Can’t wait to get the k20 up and running
@@gdm_crx8513 nice one bro
Thank You for posting this video, I am considering buying a Honda Ridgeline and this is an incentive to do so.
Glad it was helpful! I enjoy my Ridgeline . Wanted one for years and can’t believe I waited so long to buy one.
Wow the earth got really small there for a while.
Nice job bro 💪
Thanks ✌
I miss my 1st Gen. Ridge.
You should get a other one . I enjoy the truck . A few small features I wish the would had updated. But overall a good truck.
If you don't use the roof racks, you should take them off. I took mine off and the wind noise was reduced significantly. You may reach 183 or 185 without the aerodynamic drag.
Maybe . But it’s more like dopes mentioned that the speed is limited with the cpu . You can floor it but nothing is happening . Even down hill. I need to find someone that can remove the limiter in the cpu
Really rare spoiler 😊 take care of it.
Will do. Possibly making some new ones in carbon fiber in the future. Spoke already to some company’s but it’s very expensive.
So this is a 1st generation Ridgeline. Would love to have seen the 2nd generation. Either case the old timer did great 👍
Yes 1. Gen Ridgeline . 2. Gen I know if 2 in my area. Maybe they can give me some info how the 2 gen performs . I assume that it’s also at 110mph (180kmh).
Top speed is limited by the PCM. This is based on the stock tire speed rating. It can be removed with a programmer called Ktuner.
Thank you for that info . I will look into that. Did not know that it’s based on the tires . But a good decision. Not everyone thinks about what speed rating the tires have.
hi i want to thank you for your videos. do you have any idea how many units of the first generation Honda Ridgeline are registered in Germany? I own the first generation from 2006 and I greet you from the Czech Republic.
Greetings . Sadly I’m not aware of a website that keeps track of that number. I know in Germany not running to many . Possibly 20 maybe a few more . I know of 2 in Luxemburg and a 15+ in Belgium and Poland . Join Honda Ridgeline Europe on Facebook . We got 23 in there .
clean the snow off the truck! Typical irresponsible /only me... driver...
All good 👍🏻. All of that was done on farm roads. Also if it would had bin a safety concern I would had removed it.
I apologize. I judged too fast. My bad....@@gdm_crx8513
But you are right . Here in Germany it’s a 60 euro ticket if snow is not removed.
Hey man your other video helped me install my bakflip cover on my RL. Thank you
Your welcome. Glad it helped out .
@@gdm_crx8513 your Ridgeline looks awesome in the snow ❄️ thanks again
Dumbest looking vehicle ever made.
Maybe not everyone’s taste. What’s a good thing , if everyone had the same taste what a boring world we would live in. Also it’s not f. Electric, lol that’s got to be bonus points .
@@gdm_crx8513 I'll give it an A + for the fact its not electric lol
Very cool bro 💪
Glad you liked it
Please keep sharing more content of this crx, and thanks! for sharing the part number of the bolts. watching your videos from Dominican Republic. 😊
Thanks . Will do . I have most of the stuff already together. But Im behind in getting videos cut and uploaded.
Damn! I already saw the episode 1, glad to see another crx build. Keep it, regards from Dominican Republic. I´m looking for a pair of ee8 headlights haha
Thank you . Hit me up on instagram. Same name gdm_crx . Since in currently in Europe might be able to help out .
Some lovely Hondas there bro great work….🤛🏻🏎
Agreed. Can’t wait for this year 2024 meet . Hopefully it will get even bigger !
In diesem Fall: zum Glück!
Wieso? CRX war genial!
Yup. Eventuell weil nicht oem , aber das war vor 24 Jahren so.
Ja sehr schade, die Autos werden immer schlechter und anfälliger
Da hast du recht. Und man kann immer weniger selbst machen wegen der Elektronik.
Dafür wird Autos geben, die wir bisher noch nie gesehen haben, weil es sie noch nicht gibt ;)
lieber nix als crx
Danke
She looks great ! just finished my crx as well
Thank you . Getting there . Still buying parts for the engine k20 build .