Nice gun for a big guy with big hands. My hands are not that big.
@plantguy10011 сағат бұрын
DO NOT PURCHASE GIRSAN FIREARMS UNLESS YOU ARE PREPARED TO SPEND MORE MONEY IF THEY NEED WARRANTY SERVICE. In order to obtain warranty service from EAA, the purchaser must pay shipping costs to and from EAA and must send and receive the gun through an FFL, who of course will charge you. Total costs could easily exceed $75. ($15 to send to EAA, $30 to return (per EAA), and at least $15 each way for the FFL. I own two Girsan MCP35 PI models: an early PI models (curved trigger, no pic rail, no optics cut, mag disconnect). It shoots fine and the mag trigger disconnect really is a non issue for me. That lead me to purchase one of the updated PI Ops models with the optics cut, flat trigger and pic rail. On the larger 4.88" model, you must choose between those with a pre-installed optic and those with no optics cut. On the smaller 3.88” PI model, the pistol comes with the rear iron sight attached to the optics cover plate. I've had three other experienced shooters at my range shoot the gun and for all of us, the same results -- The point of impact is several inches low. We believe the rear sight sits too low, although it's possible the heavy trigger (which may improve some with use) is a contributing factor. Not only must you raise your point of aim, but the front sight must be held above (not level with) the rear sight. I'm familiar with the differentiation between "target" sights and "combat" sights, but this issue goes well beyond that. Has anyone else had this issue with the MCP35 PI Ops model where the rear sight is part of the optics cover plate??
@Exandria11 сағат бұрын
Whats the issue with the president of TISAS? I don’t know anything about this
@arielmainieri807212 сағат бұрын
Im looking for p226 or p229 in .40 s&w in my country but I cant found it.
@70bonnevilleguy5316 сағат бұрын
My Tisas B45 1911 I bought runs better than the two Kimbers I owned.
@Burningwhisky9619 сағат бұрын
I love the looks, but i bet the ammo consumption is expensive as hell
@randomguy303420 сағат бұрын
10mm is gods true handgun caliber. 750 ft lbs is nothing to laugh at.
@luhnukk492021 сағат бұрын
😂😂😂 you could’ve just said black guys with glock 27s i would understand 😪
@mistermom310Күн бұрын
🤔🤔🤔
@thisguy7010Күн бұрын
I did this two years ago. . . .a year before this video. 😂😂😂🎉
@dakotahayes8709Күн бұрын
Just continue down the rabbit hole... where do you usually keep your Tic Tacs?
@JeffElliott-jb7ixКүн бұрын
I kind of like the moderator on the clone, but the Tisas is more practical. They both shoot the same caliber, so I would just choose the Tisas, even though the clone MAC looks cool(ish).
@BenjaminCole520Күн бұрын
I got The M&P 5.7 and I’ll just stick to that.
@mchlcordellКүн бұрын
What’s you’re thoughts on the Ruger version?
@projectcrowdsurfer3732Күн бұрын
Never heard of tisas
@thatguywhogames2373Күн бұрын
The Tisas PX9 Gen 3 was my first handgun at 300 bucks. Came with a hard case, backstraps, 18 and 20 rnd mags, about a 4 lb crisp trigger (been chasing after something similar for my new cc), removable magwell and, a cleaning kit. Talk about value!
@wolfhuntersarmoryКүн бұрын
I love Tisas pistols. The 1911's, Night Stalker 2011, 5.7... They all run and are accurate at cheaper prices than Rock Island, Springfield, FN, Ruger, and Kimber... the companies they are "competing" with.
@TheProdiigyКүн бұрын
If you’re going to get a 5.7 for budget price go for a PSA rock. If you want a good 5.7 get a FN, Ruger, or S&W
@ricbaggedyomommzКүн бұрын
I need a FN they smooth asl
@bullets1x99Күн бұрын
I’d rather just keep getting guns that a chambered in what the USA 🇺🇸 military uses Cheap and plentiful for now anyway I’ve got one rifle though was handed down to me from my grandfather I think it’s called a mouser bolt action rifle Shoots 762x58 can’t find ammo for it Everywhere I go out of stock probably all going to Ukraine 🇺🇦
@stevelyons2744Күн бұрын
Depends on the purpose. Tisas for EDC. The Masterpiece is more balanced for longer firing sessions that require a second hand stabilization.
@daleweller5193Күн бұрын
The screw in the trigger is for over travel not weight adjustment .
@doughaner2709Күн бұрын
I've heard really hood things about PSA's customer service. And the beater AR I bought from them has been hood to me.
@nf4833Күн бұрын
I don’t carry 1911’s I carry 1311’s because you can find them just laying around on the ground but you do have to have a good arm so you can throw them
@ColtonGastКүн бұрын
Id take olight over support for NRA
@MC-oh1juКүн бұрын
“Forged” hehe
@tyronesteenhoven545Күн бұрын
Sig has this very great warranty program with pretty good customer service and I’d send it back and have them fix it immediately.
@ElderBoobКүн бұрын
223 and 556 have insanely different psi. Who says they are the same? 😂
@arthurpriestley8103Күн бұрын
S&W and Ruger are gss op. Is the 400$ price due to not gas 0p.? How many companys make 5 7's and how many are gas op compared to blow back . The next Canadian government will let us buy hand goons again . We HOPE !
@TheJimminiShowКүн бұрын
None of them are gas operated. They are all a form of blowback.
@thickoc4539Күн бұрын
Yeah. Weird flapper delayed right??
@BenResterКүн бұрын
I want and need it!
@KAZUALSTRATZКүн бұрын
I really think people give PSA too much crap, PSA customer service got me through pretty quickly last time I had to call and ask some questions
@lando7756Күн бұрын
I agree, PSA does a lot of good. Does their QC need to be better? Sure, but i’ve never had a problem with their products and CS.
@llend07Күн бұрын
I’m glad to hear you’re on the mend. We often ignore our hydration. We have to get intentional. Again, glad you’re on the mend
@thatdude4155Күн бұрын
I’ve been doing my research as I want a 5.7 but now I don’t know which one to buy 😂 I was looking at the Tisas but I can’t find a full review on it
@epicriku9162Күн бұрын
Me too bro I have my eyes on the psa 5.7
@sethdechand2657Күн бұрын
Get a ruger or S&W
@thatdude4155Күн бұрын
@@sethdechand2657 Ruger is looking like the way I’m going to go
@xCynFRКүн бұрын
@@epicriku9162Im waiting on the compact 5.7 to drop that and the x5.7 is what im waiting for
@thatdude4155Күн бұрын
@@epicriku9162 I keep hearing horror stories about the QC on the PSA pistols. I have two AR that I’m using their lowers and haven’t had any issues whatsoever. That being said it’s not much left stock on them besides the buffers
@WesmancanКүн бұрын
Someone needs a life.
@YouTubeStatКүн бұрын
Yea I'm not with this bs and cancelled my premium sub over it. KZread and Google need to back off.
@casey-j-neercjn7856Күн бұрын
Can't buy it in Commiefornia Jr (washington state)
@misterbear9211Күн бұрын
I have the opposite results. My Ruger P95 is the least accurate pistols I own.
@surfofsinifyКүн бұрын
If it was anybody else I would question the dick fish
@el_barto3640Күн бұрын
Just got a Ruger 57 for $650 did I get ripped off? IDC bc I love the thing but fr did I?
@mistermom310Күн бұрын
If I'm going to add another caliber, I don't think it'll be 5.7x28😂
@R1CEBWLКүн бұрын
Honestly I hate my p320x carry legion.. I was so excited to get it and then after shooting it I was extremely disappointed. Plus with the p320 apparently having issues going off by itself, it now has me sketched out to carry with one of the chamber.. which is why I'm going to sell. Plus the trigger still feels like garbage. Like you said, sometimes with a fraction of the price you get something better.. in this case, I picked up a tisas night stalker.. it drill holes.. and the trigger is way better.
@JoeshmoshootsКүн бұрын
57 sucks 22mag
@robs4517Күн бұрын
I don't buy foreign guns. Especially not turkish crap.
@StoneconКүн бұрын
What's the issue? Maybe do a video amd link it? Spill the tea man!
@TheJimminiShowКүн бұрын
Did two check out tisas nightstalker lies on my channel
@StoneconКүн бұрын
@@TheJimminiShow will do brother. Thanks for the reply
Пікірлер
Dude that flip though lol
I’ll a pizza instead
I rather have the olight
😂😂😂
Nice gun for a big guy with big hands. My hands are not that big.
DO NOT PURCHASE GIRSAN FIREARMS UNLESS YOU ARE PREPARED TO SPEND MORE MONEY IF THEY NEED WARRANTY SERVICE. In order to obtain warranty service from EAA, the purchaser must pay shipping costs to and from EAA and must send and receive the gun through an FFL, who of course will charge you. Total costs could easily exceed $75. ($15 to send to EAA, $30 to return (per EAA), and at least $15 each way for the FFL. I own two Girsan MCP35 PI models: an early PI models (curved trigger, no pic rail, no optics cut, mag disconnect). It shoots fine and the mag trigger disconnect really is a non issue for me. That lead me to purchase one of the updated PI Ops models with the optics cut, flat trigger and pic rail. On the larger 4.88" model, you must choose between those with a pre-installed optic and those with no optics cut. On the smaller 3.88” PI model, the pistol comes with the rear iron sight attached to the optics cover plate. I've had three other experienced shooters at my range shoot the gun and for all of us, the same results -- The point of impact is several inches low. We believe the rear sight sits too low, although it's possible the heavy trigger (which may improve some with use) is a contributing factor. Not only must you raise your point of aim, but the front sight must be held above (not level with) the rear sight. I'm familiar with the differentiation between "target" sights and "combat" sights, but this issue goes well beyond that. Has anyone else had this issue with the MCP35 PI Ops model where the rear sight is part of the optics cover plate??
Whats the issue with the president of TISAS? I don’t know anything about this
Im looking for p226 or p229 in .40 s&w in my country but I cant found it.
My Tisas B45 1911 I bought runs better than the two Kimbers I owned.
I love the looks, but i bet the ammo consumption is expensive as hell
10mm is gods true handgun caliber. 750 ft lbs is nothing to laugh at.
😂😂😂 you could’ve just said black guys with glock 27s i would understand 😪
🤔🤔🤔
I did this two years ago. . . .a year before this video. 😂😂😂🎉
Just continue down the rabbit hole... where do you usually keep your Tic Tacs?
I kind of like the moderator on the clone, but the Tisas is more practical. They both shoot the same caliber, so I would just choose the Tisas, even though the clone MAC looks cool(ish).
I got The M&P 5.7 and I’ll just stick to that.
What’s you’re thoughts on the Ruger version?
Never heard of tisas
The Tisas PX9 Gen 3 was my first handgun at 300 bucks. Came with a hard case, backstraps, 18 and 20 rnd mags, about a 4 lb crisp trigger (been chasing after something similar for my new cc), removable magwell and, a cleaning kit. Talk about value!
I love Tisas pistols. The 1911's, Night Stalker 2011, 5.7... They all run and are accurate at cheaper prices than Rock Island, Springfield, FN, Ruger, and Kimber... the companies they are "competing" with.
If you’re going to get a 5.7 for budget price go for a PSA rock. If you want a good 5.7 get a FN, Ruger, or S&W
I need a FN they smooth asl
I’d rather just keep getting guns that a chambered in what the USA 🇺🇸 military uses Cheap and plentiful for now anyway I’ve got one rifle though was handed down to me from my grandfather I think it’s called a mouser bolt action rifle Shoots 762x58 can’t find ammo for it Everywhere I go out of stock probably all going to Ukraine 🇺🇦
Depends on the purpose. Tisas for EDC. The Masterpiece is more balanced for longer firing sessions that require a second hand stabilization.
The screw in the trigger is for over travel not weight adjustment .
I've heard really hood things about PSA's customer service. And the beater AR I bought from them has been hood to me.
I don’t carry 1911’s I carry 1311’s because you can find them just laying around on the ground but you do have to have a good arm so you can throw them
Id take olight over support for NRA
“Forged” hehe
Sig has this very great warranty program with pretty good customer service and I’d send it back and have them fix it immediately.
223 and 556 have insanely different psi. Who says they are the same? 😂
S&W and Ruger are gss op. Is the 400$ price due to not gas 0p.? How many companys make 5 7's and how many are gas op compared to blow back . The next Canadian government will let us buy hand goons again . We HOPE !
None of them are gas operated. They are all a form of blowback.
Yeah. Weird flapper delayed right??
I want and need it!
I really think people give PSA too much crap, PSA customer service got me through pretty quickly last time I had to call and ask some questions
I agree, PSA does a lot of good. Does their QC need to be better? Sure, but i’ve never had a problem with their products and CS.
I’m glad to hear you’re on the mend. We often ignore our hydration. We have to get intentional. Again, glad you’re on the mend
I’ve been doing my research as I want a 5.7 but now I don’t know which one to buy 😂 I was looking at the Tisas but I can’t find a full review on it
Me too bro I have my eyes on the psa 5.7
Get a ruger or S&W
@@sethdechand2657 Ruger is looking like the way I’m going to go
@@epicriku9162Im waiting on the compact 5.7 to drop that and the x5.7 is what im waiting for
@@epicriku9162 I keep hearing horror stories about the QC on the PSA pistols. I have two AR that I’m using their lowers and haven’t had any issues whatsoever. That being said it’s not much left stock on them besides the buffers
Someone needs a life.
Yea I'm not with this bs and cancelled my premium sub over it. KZread and Google need to back off.
Can't buy it in Commiefornia Jr (washington state)
I have the opposite results. My Ruger P95 is the least accurate pistols I own.
If it was anybody else I would question the dick fish
Just got a Ruger 57 for $650 did I get ripped off? IDC bc I love the thing but fr did I?
If I'm going to add another caliber, I don't think it'll be 5.7x28😂
Honestly I hate my p320x carry legion.. I was so excited to get it and then after shooting it I was extremely disappointed. Plus with the p320 apparently having issues going off by itself, it now has me sketched out to carry with one of the chamber.. which is why I'm going to sell. Plus the trigger still feels like garbage. Like you said, sometimes with a fraction of the price you get something better.. in this case, I picked up a tisas night stalker.. it drill holes.. and the trigger is way better.
57 sucks 22mag
I don't buy foreign guns. Especially not turkish crap.
What's the issue? Maybe do a video amd link it? Spill the tea man!
Did two check out tisas nightstalker lies on my channel
@@TheJimminiShow will do brother. Thanks for the reply