i’ve replaced literally everything on the same exact cooler, and it still blows out hot air .. how do I fix this issue??
@dharmadude80922 күн бұрын
You should show how to take the screws in and out. It’s really hard unless you do it just so. I spent about an hour by trial and error figuring out just how to get the screws in and out just to find out that the replacement part fits the machine, but then the screen doesn’t fit all the way into the part even though I used the correct model number for the machine to order the part from LG. Can you say TFWOT? My best advice to those of you out there who are not doing something like this on a regular basis: higher a professional. It’s worth the money.
@gabrielmaldonado48027 күн бұрын
Swamp cooler had lot's of HAIR..!
@bgable770727 күн бұрын
What is the value / need for this bleed off tube? I've read is helps keep the water cleaner, how so? How necessary is it? thank you.
@stevegraydon635128 күн бұрын
Good stuff. Mine doesn't have the side media, that's weird.. but I always see them in the replacement kits. Thanks for the video - also helped me take those clips off without breaking stuff ;)
@shellyjones3046Ай бұрын
Thank you for the through instructions. Got my put in in less than 5 minutes
@Gias13aАй бұрын
Do you have a video on how to connect to the window ? Thank you
@wait4dlАй бұрын
the new media is a piece of crap/ with the split pads it leaks like crazy. cheap pads now.
@toekneelorenzo2942Ай бұрын
S say the tension is right cud it just b time fir a new belt? Ive had belt about 2 years
@logansmokes.2762Ай бұрын
mine had original pads after 8 yrs i decided to to with the blue master cool got a big roll for 52$ compared to 120$ for the dactory replacement but i see that these other kinds of pads do not work well since they are not rigid they fall off the sides when soaked in water unless secured every milimeter and since they are so thin i doubled it up and since the inside is so small compaeed to big box ones you really need the factory replacement.
@dannypalmer7701Ай бұрын
Didnt know you can buy pads! 😂
@iviaquaАй бұрын
Amazing idea to cover with plastic, thank you!!!
@iviaquaАй бұрын
Thank you and God bless you for sharing your knowledge. My water line kept on leaking. I keep changing the brass sleeve but nothing I did help. I did this which took like 2 min and no more leak🥳. Thank you
@jackmatson962Ай бұрын
Since my unit is a roof mounted down draft, you will not catch me on the roof 'every few weeks' routing the distributer lines 😁! That said, only once did I have a problem with clogged distributor (sometimes aka 'spider') caused by aspen fibers getting sucked up by the pump. Solution: make sure the screen on the pump or basket is in good condition.
@Naturelover00023Ай бұрын
Awesome ! Thank you that’s simple enough.
@Oreogang8092Ай бұрын
Because your house has to be cool in the summer
@Oreogang8092Ай бұрын
Bro, how many swamp coolers do you have?
@danielcorrigan7604Ай бұрын
That was so easy quick and straight to the point great video
@DeeDee-rr3snАй бұрын
Great video. Hey i need to replace my pump, do you happen to know how to access the electrical panel where the pump connects to? I know the pump electrical line theads in from the back i wonder if the other end can be accessed by taking off the front panel???
@maevanessa97Ай бұрын
Perfect. My connector just got broken. Your video is the first I found ...thank you so much!!!
@shelleyshelton33Ай бұрын
Brilliant vid. Anyone know much water does the bleed line waste on high in a 24 hour period? TYMIA
@boogity66Ай бұрын
You could restrict the water line to bleed less. More than likely you should be bleeding at least 5 gallons and 24-hours.
@OneResearcherАй бұрын
39k views😂😂😂 thank you so much!!!!
@larryburch9192 ай бұрын
Did you mount it there for the video? Those thermostats are not waterproof
@Muffduster2 ай бұрын
Didn’t work with G4SE gateway on 5/29/24.
@thetwerkingtroutfishing90722 ай бұрын
Where did you get the ppads
@karlaelvis98152 ай бұрын
Great video - easy to follow all of the steps. I just hooked up my water using the same system that you did. I'm running the cooler and haven't seen water come out of the overflow yet... is there a way to hook the water supply up so that you can leave the hose bib on "low"? That's what I have it at now, but I'm sure at some point it is going to start out the overflow valve. I'll check out your other videos, but will be sure to clean my cooler at the end of this season - thanks again!
@maiko77722 ай бұрын
we just bought the same unit and finished converting it to side discharge ,, now ,, we will use it as a window unit for our yurt ,, its now siting on a 2 feet high platform outside of the window , do you have a video on how to wire this please ?
@louisaisthankful64552 ай бұрын
W🤩W Thanks! I believe I can do that!
@Saynt6142 ай бұрын
Dude you are my hero. Thanks!
@shellys.78482 ай бұрын
Thank you! So helpful i have to do it alone this year 😳
@patjones20822 ай бұрын
Thank you! How do you get it unstuck if lime scale built up? My spouse passed away, and I'm not as strong with smaller hands. Ideas appreciated!
@jonahsalcido59882 ай бұрын
You can use 2 wrenches one at the top and bottom. And twist in opposite directions with both wrenches.
@jerrygonzales462 ай бұрын
Thanks for the help. Simple task but made easier by you.
@sethallison56822 ай бұрын
Are the holes for the distributor supposed to be pointing up like yours? Mine was and I made them point downward. It seemed like the water was spraying and dripping excessively past the pads with them pointing up.
@omarrosas75023 ай бұрын
Quick question boss. How much water is it normal for these units to discharge through the purge hose? Mine is quite a bit. About 1 gallon an hour. It is a new unit so the plug (or whatever it's called doesn't have any buildup). I'd appreciate the input. Great video by the way 👍
@boogity663 ай бұрын
You could always restrict the flow a little bit of the discharge hose. But the more water that bleeds off the less build up.
@KevinMacLeod-administrator3 ай бұрын
Originally came for the video and stayed for the community built around not being able to put in those forsaken screws.
@Rachel-zc8ur3 ай бұрын
Wish all videos were this clear and straight to the point. Excellent!
@boogity663 ай бұрын
Thanks for watching.
@tylerstrollo72263 ай бұрын
when would it be a good idea to clean the doors? mine have some mineral build up, but not a lot
@boogity663 ай бұрын
If it looks bad do it.
@williamcrazylacyfurmage99533 ай бұрын
i need to jb weld a few pin holes in the pan, i installed the unit new in 2002, 6 yrs ago i did the black stuff you show here. needs another pan tune up again, rusty as hell :)
@richenevanderford86733 ай бұрын
Where is the bar that goes in atop of the wet pan and how does it sit correctly?
@boogity663 ай бұрын
not too sure what you're asking period
@SiBorg8A3 ай бұрын
Is the sheet metal from a roll of flashing? Just wondering how think it is?
@boogity663 ай бұрын
It doesn't have to be too thick.
@DarthMoz3 ай бұрын
Why does my swamp cooler not have the screws on the bottom I’m having issues taking it off.
@caryatid21414 ай бұрын
So helpful! Thank you.
@whitetrim14 ай бұрын
Thanks for sharing!
@Father_fast4 ай бұрын
Thanks bud i had to clean her damn near had a fire hazard on my hands from all the lint
@joy2youandme74 ай бұрын
Thank you! I was able to change it in 2 minutes! No more paying my mechanic to replace.
@joeversus71135 ай бұрын
How do I bring power to my roof? Romex? My unit is on my roof not on the ground.
@julienpenaruiz5 ай бұрын
Do you have a roof install video? Does this unit comes with a controler to start it.
Пікірлер
thanks!
I'm putting that on the inside of my house
i’ve replaced literally everything on the same exact cooler, and it still blows out hot air .. how do I fix this issue??
You should show how to take the screws in and out. It’s really hard unless you do it just so. I spent about an hour by trial and error figuring out just how to get the screws in and out just to find out that the replacement part fits the machine, but then the screen doesn’t fit all the way into the part even though I used the correct model number for the machine to order the part from LG. Can you say TFWOT? My best advice to those of you out there who are not doing something like this on a regular basis: higher a professional. It’s worth the money.
Swamp cooler had lot's of HAIR..!
What is the value / need for this bleed off tube? I've read is helps keep the water cleaner, how so? How necessary is it? thank you.
Good stuff. Mine doesn't have the side media, that's weird.. but I always see them in the replacement kits. Thanks for the video - also helped me take those clips off without breaking stuff ;)
Thank you for the through instructions. Got my put in in less than 5 minutes
Do you have a video on how to connect to the window ? Thank you
the new media is a piece of crap/ with the split pads it leaks like crazy. cheap pads now.
S say the tension is right cud it just b time fir a new belt? Ive had belt about 2 years
mine had original pads after 8 yrs i decided to to with the blue master cool got a big roll for 52$ compared to 120$ for the dactory replacement but i see that these other kinds of pads do not work well since they are not rigid they fall off the sides when soaked in water unless secured every milimeter and since they are so thin i doubled it up and since the inside is so small compaeed to big box ones you really need the factory replacement.
Didnt know you can buy pads! 😂
Amazing idea to cover with plastic, thank you!!!
Thank you and God bless you for sharing your knowledge. My water line kept on leaking. I keep changing the brass sleeve but nothing I did help. I did this which took like 2 min and no more leak🥳. Thank you
Since my unit is a roof mounted down draft, you will not catch me on the roof 'every few weeks' routing the distributer lines 😁! That said, only once did I have a problem with clogged distributor (sometimes aka 'spider') caused by aspen fibers getting sucked up by the pump. Solution: make sure the screen on the pump or basket is in good condition.
Awesome ! Thank you that’s simple enough.
Because your house has to be cool in the summer
Bro, how many swamp coolers do you have?
That was so easy quick and straight to the point great video
Great video. Hey i need to replace my pump, do you happen to know how to access the electrical panel where the pump connects to? I know the pump electrical line theads in from the back i wonder if the other end can be accessed by taking off the front panel???
Perfect. My connector just got broken. Your video is the first I found ...thank you so much!!!
Brilliant vid. Anyone know much water does the bleed line waste on high in a 24 hour period? TYMIA
You could restrict the water line to bleed less. More than likely you should be bleeding at least 5 gallons and 24-hours.
39k views😂😂😂 thank you so much!!!!
Did you mount it there for the video? Those thermostats are not waterproof
Didn’t work with G4SE gateway on 5/29/24.
Where did you get the ppads
Great video - easy to follow all of the steps. I just hooked up my water using the same system that you did. I'm running the cooler and haven't seen water come out of the overflow yet... is there a way to hook the water supply up so that you can leave the hose bib on "low"? That's what I have it at now, but I'm sure at some point it is going to start out the overflow valve. I'll check out your other videos, but will be sure to clean my cooler at the end of this season - thanks again!
we just bought the same unit and finished converting it to side discharge ,, now ,, we will use it as a window unit for our yurt ,, its now siting on a 2 feet high platform outside of the window , do you have a video on how to wire this please ?
W🤩W Thanks! I believe I can do that!
Dude you are my hero. Thanks!
Thank you! So helpful i have to do it alone this year 😳
Thank you! How do you get it unstuck if lime scale built up? My spouse passed away, and I'm not as strong with smaller hands. Ideas appreciated!
You can use 2 wrenches one at the top and bottom. And twist in opposite directions with both wrenches.
Thanks for the help. Simple task but made easier by you.
Are the holes for the distributor supposed to be pointing up like yours? Mine was and I made them point downward. It seemed like the water was spraying and dripping excessively past the pads with them pointing up.
Quick question boss. How much water is it normal for these units to discharge through the purge hose? Mine is quite a bit. About 1 gallon an hour. It is a new unit so the plug (or whatever it's called doesn't have any buildup). I'd appreciate the input. Great video by the way 👍
You could always restrict the flow a little bit of the discharge hose. But the more water that bleeds off the less build up.
Originally came for the video and stayed for the community built around not being able to put in those forsaken screws.
Wish all videos were this clear and straight to the point. Excellent!
Thanks for watching.
when would it be a good idea to clean the doors? mine have some mineral build up, but not a lot
If it looks bad do it.
i need to jb weld a few pin holes in the pan, i installed the unit new in 2002, 6 yrs ago i did the black stuff you show here. needs another pan tune up again, rusty as hell :)
Where is the bar that goes in atop of the wet pan and how does it sit correctly?
not too sure what you're asking period
Is the sheet metal from a roll of flashing? Just wondering how think it is?
It doesn't have to be too thick.
Why does my swamp cooler not have the screws on the bottom I’m having issues taking it off.
So helpful! Thank you.
Thanks for sharing!
Thanks bud i had to clean her damn near had a fire hazard on my hands from all the lint
Thank you! I was able to change it in 2 minutes! No more paying my mechanic to replace.
How do I bring power to my roof? Romex? My unit is on my roof not on the ground.
Do you have a roof install video? Does this unit comes with a controler to start it.
Thank you for the how to video!!