Below is what I think when I'm not making/editing videos:
I love youtube! I have learned so much from other youtubers, this is my way of giving back to all those that have helped me fix my stuff or solve a problem or given me basic training and an understanding of something new to me. When I think I've stumbled upon something, I am putting it here and hopefully others begin to do the same. I am here to teach you a thing or two; if you have done the same, thank you!
This is what I think when I'm making/editing videos:
This is a total waste of my time and no one appreciates any of this, why do I bother?
I'd appreciate a subscription, if you appreciate this content. I'm sorry for on-the-fly moments cought on camera, I have a life and job and limited time, I have no incentive to do this more professionally by starting with a script and plan. Thanks for supporting me.
Пікірлер
Do you have to get a new distributor or can you just lube it?
Pretty cool hack! Im pretty sure that its been noted by Two Notes that Captor cant drive any headphones output , youd have to get a separate headphone amp for that , or the Captor X
Wrong stock, wrong screwdriver, you sir may own a lot of guns but you don’t know anything about guns
I’m sorry sorry this happened to you 🥹
How? Why?
Terrible advise…
My dad owned a kabar 1189 and ive restored it decently when it comes to eust and the handle, but its missing a lock pin, do you have any idea if i could fix it in any way or buy a new lock pin?
Um bloqueio de grade muito leve torna o timbre acrilico percebi que minha modificação no tiny terror no acoplamento v1a v1b 1nf para 22nf tipico de vox ac esta turbulento expelindo tornados pelo duto do gabinete o falante esta distorcendo com os graves
Pshhh, this is nothing. When I was his age I was bowling over 500. EASY. just kidding..this is impressive. Very well done.
I have a iPhone 13 fully updated to the newest iOS version, I dropped it I use it 10 hours a day, I take pictures and videos all the time. Even my old iPhone 11 still works flawlessly and it has more wear and tear. It’s not apples fault it’s the owners fault. Also if you have this mindset that all tech giants make crap tech so you can buy more then don’t buy it. In fact 0:14 apple keeps updating phones 7 years after their release dates while other major brands only support 3-5 years. And maybe you just need to clean your phone and take care of it better. I work with my phone for hours a day but I can still take a few seconds to make sure that it won’t get damaged. If something doesn’t work right for you then before you blame it on the company think if you could have done a better job taking care of it.
Take a look at Pixel
nobody else cares neither
Get an android iPhone has old technology DON'T BE A SHEEP
Bro I feel your pain exactly. I have a 13 as well and the autocorrect drives me absolutely insane and the picture quality has tanked. It should be illegal for the new systems to make the old phones crap.
You speak the truth my friend, why would you make something good, dependable, and reliable? Answer: You don't, 'cause if you do, they won't by more of them.
Thank you so much!
Unfortunately it’s mostly a marketing scheme apple even admitted too, they complicate software every update, causing old phones to get worse, a new iPhone better until the cycle happens again and the newer iPhones will start slowing down with newer updates
🤣🤣🤣🤣🤣🤣
I'm sorry you guys, unless I'm a 13 year old girl, people use their phone as a tool, don't mess with the basic things and make them more complicated just to say it's better. Example: When I'm done in a meeting, I want to take a picture of the whiteboard, I want to mark it up QUICKLY and email it to my team, while it's still fresh in their heads, I can't do that anymore, because the markup is so dumb and complicated it takes forever. Don't screw the camera don't screw with the flashlight, if the phone can't do those things easily, you lost a cusromer.
You sure do cry a lot. You do realize there are other phones out there, right? Way to self own ya bum 🤦😂
Offer hope...and snatch it away...sphincter!
Hey! Just saw your amplifier jack change video, nice work! I’m fixing my amp and facing the same issue, is there any way i can show it to you and maybe get some guidance?
Uhhh sure, how is that going to happen however? I here on this Earth to help, so.... I guess yes.
Thanks. I am missing mine.
Did you get unalived?
Never use car ramps they are to Dangerous use jacks and blocks so if the jack moves or falls it goes on the big wide blocks. Your life if worth doing this
You dont want to not block your tites or you will look like him or worse 😂 just because yiur a engineer doesn't mean you have common sense ot smart 😂
That's a REMLIN!!!
Just bondo it ober now.
😂😂😂
The part where you glued the neck into the joint for "sustain"...i can not imagine something more retarded. Other than that, i popped the threads on my single action truss rod bass aswell, it was fine atm but now it still needs some more tightening after a year of not playing it and humidity shifts. My advice, your regular luthier will not bother to straighten the neck to where it needs to be if it's maxed out on the truss rod already, run lighter strings or just sell the damn thing My bad for imagining i could swap the strings to thicker ones for lower tuning on my 250 dollar bass.
Is this for real?
Yes
Ive had a jones max flow x pipe muffler on my explorer 5.0 for over 6 years now and it still sounds great
Have you ever ran the jones exhaust full boar 2 chamber flow deflector muffler? Been wondering about that muffler. Jones exhaust mufflers seem to be made from a good quality steel, which doesn't seem to rust out easily.
You need new screws
Why you sound like Fred fredburger the green elephant from the grim adventure of Billy and Mandy
What? I got to look this up lol
Ok, agreed 😑
@@amateurism1I like how you said yes, and when you look up Fred fredburger the first thing he says is yes!
did you draw it ?
Traced it from the squire.
👍
Red Loctite.
wheel chocks are designed to hold the vehicle [ triangle] best used in a flat setting
No one knows better than me, trust me.
I'll just rewire it once i get it with no safety switches so i do take all those out from every one of my mowers
You didn't wanna fuck with that mower anymore cause its missing a few little stator wires and those things whats that a tecumseh engine or briggs No Kohlers are always hooked up with a bunch of different relays that the engine really doesn't need 6 or 7 relays for it to start up and idle and you use the mower to cut it doesn't need them all anyhow they act as how a ignition solenoid does
That stuff ain't gonna work for me push buttons don't like to work when they get wet but the key will i don't have no drill back in the woods or way back in the field you know i don't own any that size what i have done though was wired up a other battery to the battery and i leave the red wire unplugged until i may need it
The low fuel level light indeed works FYI, I don't know why it didn't in this video, there may be a timer that needs to run down in addition to the level being low...?
...You should be carful pressure treated lumber could cause further rusting🤣
Thanks for the advice , thank god you're ok 🙏
Good emergency repair. In defense of a new car (a plastic part like that wouldn't have failed).
I kind of agree, yes the plastics are better in new cars, and I'm sure the heater system is just as straight forward as this old Jeep. I still don't want a new car however.
exactly what happened to mine after switching it on after a year not using it...and there was a strange smell in the air
All the work rebuilding an engine kinda counter productive to not do it the right way. That slot is a point of failure. Just saying
Good idea, thanks for sharing. U can also buy a Dorman 65241, & u don't have to weld it, but should use some locktite & good RTV sealer. - take care
Thanks that is the best idea yet.
13:25 Only take 6 to 5.5" off of the hose. It was a little short after all was said and done. I got it running with this 23 gal setup with the stock filler neck hose, part 2 is coming. The test run was done with only a few gallons in the tank so.... The wiring mods I made didn't start a fire. And the low fuel level light indeed works, I don't know why it didn't in the test in this video. The Gage reads 1/4, 1/2, ECT accurately. I'm doing this mod on my other xj! Also: consider dorman part number 800-086 to get a 3/8 rubber line on the fuel pump.
Sheesh, some of your mods could push the bias on the 12AX7's to past their max! Learn to bias and draw load lines for tubes as a minimum before working on a tube amp. It is the only way to to understand. Some of your comments are just way wrong.
Are you referring to my new grid stop resistors values?