Hi VolksPC Team, Super grateful for your resources and support! 😊 I'm using your app to run a Linux environment on LineageOS 20. I've set up SSH to listen on port 2222 due to conflicts on port 22. Despite enabling PasswordAuthentication in sshd_config, SSH login fails with "Permission denied (publickey,keyboard-interactive)." Questions: 1. Are there any VolksPC-specific steps to ensure password authentication works correctly for SSH, considering potential Android and SELinux interactions? 2.I'm seeing conflicts between X11 and Wayland, with XFCE failing to start properly. Any tips on optimizing the graphical environment in VolksPC? Any advice would be greatly appreciated! Thanks!
@VolksPCsoftwareАй бұрын
These are relatively new devices that don't have a Lineage OS port. I suspect you have installed this on a unsupported device. Please check our FAQ page.
@samuelodeloye3224Ай бұрын
@@VolksPCsoftware Thank you for your prompt reply. I've reviewed the FAQ page as suggested. The device I'm using is a Raspberry Pi 4 8GB, running a 5.15.145-v8-volkspc+ kernel on LineageOS 20. Given that the Raspberry Pi 4 is not a new device and has a LineageOS port, could you confirm if this setup is supported? If not, are there any known workarounds or community resources for using VolksPC on the Raspberry Pi 4? I'd greatly appreciate any additional guidance you can provide. Thank you!
@VolksPCsoftwareАй бұрын
@@samuelodeloye3224 Looks like you are running an older version since we have moved to Lineage OS 21. But XFCE should still work. SSH will not work until you install and start SSHD in rc.chroot (see FAQ). This is not a good way to get support. So please send email via the contact page.
@ibnuroshans814227 күн бұрын
Bro there is any custom rom available for this moto edge 30 pro/ edge+ ( 2022) phone ?? , please let me know
@lebelameАй бұрын
do you know if the Debian new version Bookworm is the download or still Bullseye ?
@VolksPCsoftwareАй бұрын
It has been running Bookworm for sometime now.
@cgmarch2359Ай бұрын
I want to try this on Lenovo P11 Pro 2nd gen 8gb ram. Pls tell me what are the risks. Are you going to release an version for it? I can help with that.. the tablet is very popular I think and it will help many ppl
@VolksPCsoftware3 ай бұрын
QT applications now runs natively on VolksPC desktop with our built-in Wayland server.
@VolksPCsoftware3 ай бұрын
Visual Studio Code now runs natively on VolksPC desktop with our built-in Wayland server.
@xpireangle4 ай бұрын
Will any IDE works on this?
@VolksPCsoftwareАй бұрын
Yes, you should be able to install any IDE available on Debian Bookworm.
@johnnyblack42615 ай бұрын
Interesting, would be great if you installed some DE on Linux like KDE plasma mobile or something that way you can use it more easily on phones.
@asoviou5 ай бұрын
Great video! Is it possible to run it without root privileges? Maybe with Shizuku I have a few android devices and love to try out
@robinwynne-lloyd21045 ай бұрын
Sounds like a great product. I have a couple of questions. I wish to try this out and I wonder if it will work on my Lenovo Tab P11 Pro gen 2 and will it help me to stop Google invading my privacy?
@desys.6 ай бұрын
Happy New Year! How can I download this?
@mailjune7 ай бұрын
Where buy? please link 🙂
@VolksPCsoftware7 ай бұрын
You can google for Transpeed X4 Android TV Box
@mailjune7 ай бұрын
@@VolksPCsoftware Can use HK1box X4 instead of Transpeed X4. ❤❤
@bsheldon20007 ай бұрын
Does it still not run on the Lenovo Tab P11? If not, is there a technical reason that prevents it from running on the non-plus tablet.
@VolksPCsoftware7 ай бұрын
It only runs on the Lenovo Tab P11 Plus tablet. This is because it needs drivers which are specific to each device. Please check our FAQ page.
@lifevalue93929 ай бұрын
I have lenovo xiaoxin pad pro 2021 11.5 Snapdragon 870 ?
@user-qh9th4sl2w9 ай бұрын
Hi! May I ask what is the difference between this desktop app and Kali Net hunter using a VNC？
@VolksPCsoftware9 ай бұрын
VNC based graphics is going to be very sluggish. Check our FAQ page for a detailed explanation.
@user-qh9th4sl2w9 ай бұрын
@@VolksPCsoftware Thanks for the reply! I already downloaded the apps and rooting my phone, can't wait to try it.
@PavanKumar-le4qd10 ай бұрын
Does it work without rooting
@VolksPCsoftware10 ай бұрын
This phone is rooted but our Raspberry Pi 4 installation doesn't require root access.
@novandrazulfiramadhan441011 ай бұрын
This is cool project. Can you demo running some test for developer users which is open VSCode and running some local server, please
@VolksPCsoftware11 ай бұрын
We just made a video of Visual Studio Code running on VolksPC Linux.
@novandrazulfiramadhan441011 ай бұрын
@@VolksPCsoftware Amazing, very interested with this linux distribution!
@lemonstable Жыл бұрын
I found a serious bug in the process of using it, the bluetooth keyboard will fail after using for a period of time, unable to input😢，Lenovo tab p11 plus
@VolksPCsoftware Жыл бұрын
Looks like you are running our free evaluation software which has this limitation. If you like our product you should buy and upgrade your installation.
@KisameSempai Жыл бұрын
volkspc only works on motorola G100?
@VolksPCsoftware Жыл бұрын
We support many devices, check www.volkspc.org.
@KisameSempai Жыл бұрын
@@VolksPCsoftware I don't see my phone lg v50 as being supported.
@stealth138 ай бұрын
Installer.apk crashes as I press install VolksPC distribution on my X96 max plus ultra with s905x4 cpu
@stealth138 ай бұрын
Installer.apk crashes as I press install VolksPC distribution on my X96 max plus ultra with s905x4 cpu
@HTTKSZ Жыл бұрын
Kardeşim şunun adam akıllı yüklenmiş videosunu gösterin ya
@markarca6360 Жыл бұрын
This is similar to a Samsung smartphone running Samsung DeX.
@szalaigabor171411 ай бұрын
It is, but Samsung removed the experimental linux support from DeX. Now DeX users are also searching for alternative solutions.
@slayerkoditv Жыл бұрын
Is the Debian firmware 32 or 64 bit? Also can I run Microsoft teams is my main concern? I would also like to know if I can run pi os 64 bit? And does it run on AOSP 13 konstakang?
@VolksPCsoftware Жыл бұрын
Both Debian and Android are 64bit. We have only tested this with Lineage OS. There is a Teams apk for Android, you will have to try it.
@devu4740 Жыл бұрын
Hey. On your website you are saying that this will work on amy android phone "VolksPC OS is a pair of Android applications that can run a full-fledged Linux desktop on any Android device. " But i saw there are some paid updates and some drivers and i dont entirely understand what and where.
@VolksPCsoftware Жыл бұрын
To support a specific Android device, we have to build our drivers for it. Please check our FAQ page which has more details.
@bootlessxfly12 ай бұрын
@@VolksPCsoftware Are you using libhybris to build the linux container's glibc driver interface? Or are you building a kernel that includes upstream drivers that make the Bionic drivers un-needed? I was about to create my own secured chroot and try to compile libhybris. Do you have a github where people can contribute code changes, or is this one of those projects that maintains GPL compliance by obfuscation?
@LynxLyon Жыл бұрын
I have the same table, but I didn't get the update to android 12, do you know how can I get android 12 on my P11 tb-J616F?
@VolksPCsoftware Жыл бұрын
You can use Lenovo's Rescue and Smart Assistant to manually update the firmware.
@LynxLyon Жыл бұрын
@@VolksPCsoftware thanks, I am going to look for it
@statixbolt Жыл бұрын
Where can i download this, I cannot find it on your website
@VolksPCsoftware Жыл бұрын
You should find all the information on the front page.
@statixbolt Жыл бұрын
@@VolksPCsoftware got it working on my s905x3!
@statixbolt Жыл бұрын
@@VolksPCsoftware you should include box x86 for 🍷
@statixbolt Жыл бұрын
@@VolksPCsoftware it stopped working now, failed to load driver, and I have root
@VolksPCsoftware Жыл бұрын
@@statixbolt We don't need root access, but you need to install volkspcupdate.zip with TWRP. All the details are in the README file.
@statixbolt Жыл бұрын
Quick tip, for users that wont a bigger screen you can use this with scrpy
@pcdelcampon Жыл бұрын
Hello, is it work with Lenovo P11?
@VolksPCsoftware Жыл бұрын
No it doesn't.
@rssszz7208 Жыл бұрын
Is it gonna run Chrome like windows
@fusion3688 Жыл бұрын
How install please help
@auxod3219 Жыл бұрын
It would be cool if it was possible to make shortcuts of Linux apps in android launcher.
@crazyscooby9670 Жыл бұрын
Dose it work on poco F1 or kult gladiator?
@tomzpl Жыл бұрын
i wish there was option to install windows on arm on these phones...
@outerspace50 Жыл бұрын
Hi, would it be possible to add support to cast volkspc app into chromecast? I did it with proot distribution using Chrome but would be great to manage to cast the whole app/desktop via chromecast. It might be good for multiple displays setup. For example I can use my dex on 1st display, run volkspc into window and cast it into wireless displays/tv's. With such i would be able to run 3rd display with hub and usb video adapter to mirror my phone screen. 1st display dex, 2nd display volksPC on wireless display, 3rd mirrored phone screen. Of course i can use cast method from Chrome but it might be more stable when it's implemented in volkspc apk. With chrome method i wasn't able to cast all desktop but only visible tabs. Cannot force xsdl or termux to cast... I can try to install vnc viewer on TV/tv box connected to display but it needs android on such display. Chromecast is more universal and in my case will leave extra space on phone screen. For other users it also will be helpfull as they will be able to cast volkspc instead of casting the whole phone screen.
@VolksPCsoftware Жыл бұрын
We already support casting of VolksPC desktop. You can check this on our Xiaomi Redme 6 video clip. This feature is part Android's capabilities and we are not doing anything special other than being a well behaved Android application. However the delay makes it unsuitable for use as a desktop. For that we recommend a phone that supports USB Type C display output.
@outerspace50 Жыл бұрын
@@VolksPCsoftware on video with redmi 6 you were casting whole screen. I meant to cast just an app conteiner so you can minimise it. So x11 forwarding into chromecast or other popular stream channels like dlna.
@VolksPCsoftware Жыл бұрын
@@outerspace50 we can't do that as we are not X11. Our FAQ page has more technical details.
@cringebunny5886 Жыл бұрын
does it work on amazon firestick?
@VolksPCsoftware Жыл бұрын
No
@statixbolt Жыл бұрын
@@VolksPCsoftware Yes! only on 64 bit ones
@razersharp26852 жыл бұрын
basically desktop.apk is vnc
@VolksPCsoftware2 жыл бұрын
No VNC is too slow, we created a graphics stack that is optimized to work with Android.
@razersharp26852 жыл бұрын
what is the ram and storage
@VolksPCsoftware2 жыл бұрын
This device has 4GB RAM, 32GB EMMC.
@hansm6292 жыл бұрын
Hello. I have a question! :) Q1. When is the official release date of VOLKSPC? I want to use it on Galaxy S22 Ultra and Galaxy Tab S8+! Q2. Are you planning to support GPU acceleration with Virtio-gpu or Virgl3D in the long run?
@usbps2id2 жыл бұрын
Android root or not?
@VolksPCsoftware2 жыл бұрын
Android is rooted.
@clarkss122 жыл бұрын
Fantastic,. Thank you very much for this presentation.
@VolksPCsoftware2 жыл бұрын
Our latest release is based on 64bit Debian Bullseye XFCE and runs on top of Lineage OS 18.1 or Lineage OS 19.1 (Android 12L)
@vxllvxn2 жыл бұрын
Impressive!
@allfredcg2 жыл бұрын
I've commented on another video in regards to GPU performance, a test with glmark2 is more appropriate in my opinion. Also in the store there's nothing to buy. When do you expect to be able to sell licenses? what other devices are you looking into?
@allfredcg2 жыл бұрын
please run something like glmark2 or similar to see graphics perf
@ikgeek2 жыл бұрын
how is this different than Andronix ? which offeres many distributions.
@VolksPCsoftware2 жыл бұрын
I have not tried any of the Linux over Android solutions. However VolksPC desktop running over Android has faster graphics performance than natively running Linux. Our FAQ page has more information.
@parkerlreed2 жыл бұрын
Link?
@DaveHoltzman2 жыл бұрын
that looks so nice. I've used volkspc on my pi 4 and I also want to use it more with my oculus quest 2
@guitian542 жыл бұрын
hello, what device you mentioned we can use to speed up the response of the raspberry pi? you mentioned it on minute 1: 53 of the video. thank you
@VolksPCsoftware2 жыл бұрын
I was suggesting EMMC (CM4) but you could even try SSD attached to USB3. This video is based on our older release. Make sure you are running the latest build.
@cringebunny58862 жыл бұрын
i get message please reboot when i start desktop. i reboot pi4 8gb several times
@VolksPCsoftware2 жыл бұрын
Please install volkspcupdate.zip from TWRP. Looks like you missed this step.
Пікірлер
it would be nice to have wine or reactos system
Does it work in p11 second gen ?
Any custom rom available for this device?
Hi VolksPC Team, Super grateful for your resources and support! 😊 I'm using your app to run a Linux environment on LineageOS 20. I've set up SSH to listen on port 2222 due to conflicts on port 22. Despite enabling PasswordAuthentication in sshd_config, SSH login fails with "Permission denied (publickey,keyboard-interactive)." Questions: 1. Are there any VolksPC-specific steps to ensure password authentication works correctly for SSH, considering potential Android and SELinux interactions? 2.I'm seeing conflicts between X11 and Wayland, with XFCE failing to start properly. Any tips on optimizing the graphical environment in VolksPC? Any advice would be greatly appreciated! Thanks!
These are relatively new devices that don't have a Lineage OS port. I suspect you have installed this on a unsupported device. Please check our FAQ page.
@@VolksPCsoftware Thank you for your prompt reply. I've reviewed the FAQ page as suggested. The device I'm using is a Raspberry Pi 4 8GB, running a 5.15.145-v8-volkspc+ kernel on LineageOS 20. Given that the Raspberry Pi 4 is not a new device and has a LineageOS port, could you confirm if this setup is supported? If not, are there any known workarounds or community resources for using VolksPC on the Raspberry Pi 4? I'd greatly appreciate any additional guidance you can provide. Thank you!
@@samuelodeloye3224 Looks like you are running an older version since we have moved to Lineage OS 21. But XFCE should still work. SSH will not work until you install and start SSHD in rc.chroot (see FAQ). This is not a good way to get support. So please send email via the contact page.
Bro there is any custom rom available for this moto edge 30 pro/ edge+ ( 2022) phone ?? , please let me know
do you know if the Debian new version Bookworm is the download or still Bullseye ?
It has been running Bookworm for sometime now.
I want to try this on Lenovo P11 Pro 2nd gen 8gb ram. Pls tell me what are the risks. Are you going to release an version for it? I can help with that.. the tablet is very popular I think and it will help many ppl
QT applications now runs natively on VolksPC desktop with our built-in Wayland server.
Visual Studio Code now runs natively on VolksPC desktop with our built-in Wayland server.
Will any IDE works on this?
Yes, you should be able to install any IDE available on Debian Bookworm.
Interesting, would be great if you installed some DE on Linux like KDE plasma mobile or something that way you can use it more easily on phones.
Great video! Is it possible to run it without root privileges? Maybe with Shizuku I have a few android devices and love to try out
Sounds like a great product. I have a couple of questions. I wish to try this out and I wonder if it will work on my Lenovo Tab P11 Pro gen 2 and will it help me to stop Google invading my privacy?
Happy New Year! How can I download this?
Where buy? please link 🙂
You can google for Transpeed X4 Android TV Box
@@VolksPCsoftware Can use HK1box X4 instead of Transpeed X4. ❤❤
Does it still not run on the Lenovo Tab P11? If not, is there a technical reason that prevents it from running on the non-plus tablet.
It only runs on the Lenovo Tab P11 Plus tablet. This is because it needs drivers which are specific to each device. Please check our FAQ page.
I have lenovo xiaoxin pad pro 2021 11.5 Snapdragon 870 ?
Hi! May I ask what is the difference between this desktop app and Kali Net hunter using a VNC？
VNC based graphics is going to be very sluggish. Check our FAQ page for a detailed explanation.
@@VolksPCsoftware Thanks for the reply! I already downloaded the apps and rooting my phone, can't wait to try it.
Does it work without rooting
This phone is rooted but our Raspberry Pi 4 installation doesn't require root access.
This is cool project. Can you demo running some test for developer users which is open VSCode and running some local server, please
We just made a video of Visual Studio Code running on VolksPC Linux.
@@VolksPCsoftware Amazing, very interested with this linux distribution!
I found a serious bug in the process of using it, the bluetooth keyboard will fail after using for a period of time, unable to input😢，Lenovo tab p11 plus
Looks like you are running our free evaluation software which has this limitation. If you like our product you should buy and upgrade your installation.
volkspc only works on motorola G100?
We support many devices, check www.volkspc.org.
@@VolksPCsoftware I don't see my phone lg v50 as being supported.
Installer.apk crashes as I press install VolksPC distribution on my X96 max plus ultra with s905x4 cpu
Installer.apk crashes as I press install VolksPC distribution on my X96 max plus ultra with s905x4 cpu
Kardeşim şunun adam akıllı yüklenmiş videosunu gösterin ya
This is similar to a Samsung smartphone running Samsung DeX.
It is, but Samsung removed the experimental linux support from DeX. Now DeX users are also searching for alternative solutions.
Is the Debian firmware 32 or 64 bit? Also can I run Microsoft teams is my main concern? I would also like to know if I can run pi os 64 bit? And does it run on AOSP 13 konstakang?
Both Debian and Android are 64bit. We have only tested this with Lineage OS. There is a Teams apk for Android, you will have to try it.
Hey. On your website you are saying that this will work on amy android phone "VolksPC OS is a pair of Android applications that can run a full-fledged Linux desktop on any Android device. " But i saw there are some paid updates and some drivers and i dont entirely understand what and where.
To support a specific Android device, we have to build our drivers for it. Please check our FAQ page which has more details.
@@VolksPCsoftware Are you using libhybris to build the linux container's glibc driver interface? Or are you building a kernel that includes upstream drivers that make the Bionic drivers un-needed? I was about to create my own secured chroot and try to compile libhybris. Do you have a github where people can contribute code changes, or is this one of those projects that maintains GPL compliance by obfuscation?
I have the same table, but I didn't get the update to android 12, do you know how can I get android 12 on my P11 tb-J616F?
You can use Lenovo's Rescue and Smart Assistant to manually update the firmware.
@@VolksPCsoftware thanks, I am going to look for it
Where can i download this, I cannot find it on your website
You should find all the information on the front page.
@@VolksPCsoftware got it working on my s905x3!
@@VolksPCsoftware you should include box x86 for 🍷
@@VolksPCsoftware it stopped working now, failed to load driver, and I have root
@@statixbolt We don't need root access, but you need to install volkspcupdate.zip with TWRP. All the details are in the README file.
Quick tip, for users that wont a bigger screen you can use this with scrpy
Hello, is it work with Lenovo P11?
No it doesn't.
Is it gonna run Chrome like windows
How install please help
It would be cool if it was possible to make shortcuts of Linux apps in android launcher.
Dose it work on poco F1 or kult gladiator?
i wish there was option to install windows on arm on these phones...
Hi, would it be possible to add support to cast volkspc app into chromecast? I did it with proot distribution using Chrome but would be great to manage to cast the whole app/desktop via chromecast. It might be good for multiple displays setup. For example I can use my dex on 1st display, run volkspc into window and cast it into wireless displays/tv's. With such i would be able to run 3rd display with hub and usb video adapter to mirror my phone screen. 1st display dex, 2nd display volksPC on wireless display, 3rd mirrored phone screen. Of course i can use cast method from Chrome but it might be more stable when it's implemented in volkspc apk. With chrome method i wasn't able to cast all desktop but only visible tabs. Cannot force xsdl or termux to cast... I can try to install vnc viewer on TV/tv box connected to display but it needs android on such display. Chromecast is more universal and in my case will leave extra space on phone screen. For other users it also will be helpfull as they will be able to cast volkspc instead of casting the whole phone screen.
We already support casting of VolksPC desktop. You can check this on our Xiaomi Redme 6 video clip. This feature is part Android's capabilities and we are not doing anything special other than being a well behaved Android application. However the delay makes it unsuitable for use as a desktop. For that we recommend a phone that supports USB Type C display output.
@@VolksPCsoftware on video with redmi 6 you were casting whole screen. I meant to cast just an app conteiner so you can minimise it. So x11 forwarding into chromecast or other popular stream channels like dlna.
@@outerspace50 we can't do that as we are not X11. Our FAQ page has more technical details.
does it work on amazon firestick?
No
@@VolksPCsoftware Yes! only on 64 bit ones
basically desktop.apk is vnc
No VNC is too slow, we created a graphics stack that is optimized to work with Android.
what is the ram and storage
This device has 4GB RAM, 32GB EMMC.
Hello. I have a question! :) Q1. When is the official release date of VOLKSPC? I want to use it on Galaxy S22 Ultra and Galaxy Tab S8+! Q2. Are you planning to support GPU acceleration with Virtio-gpu or Virgl3D in the long run?
Android root or not?
Android is rooted.
Fantastic,. Thank you very much for this presentation.
Our latest release is based on 64bit Debian Bullseye XFCE and runs on top of Lineage OS 18.1 or Lineage OS 19.1 (Android 12L)
Impressive!
I've commented on another video in regards to GPU performance, a test with glmark2 is more appropriate in my opinion. Also in the store there's nothing to buy. When do you expect to be able to sell licenses? what other devices are you looking into?
please run something like glmark2 or similar to see graphics perf
how is this different than Andronix ? which offeres many distributions.
I have not tried any of the Linux over Android solutions. However VolksPC desktop running over Android has faster graphics performance than natively running Linux. Our FAQ page has more information.
Link?
that looks so nice. I've used volkspc on my pi 4 and I also want to use it more with my oculus quest 2
hello, what device you mentioned we can use to speed up the response of the raspberry pi? you mentioned it on minute 1: 53 of the video. thank you
I was suggesting EMMC (CM4) but you could even try SSD attached to USB3. This video is based on our older release. Make sure you are running the latest build.
i get message please reboot when i start desktop. i reboot pi4 8gb several times
Please install volkspcupdate.zip from TWRP. Looks like you missed this step.
@@VolksPCsoftware thank you it's working.