Thank You very Much this is the best diy gutter installation i seen yet it i will definitely be using as a reference as i install my gutters myself
@mikeevaniew51272 ай бұрын
I sure hope you don’t install eavestrough for a living. I wouldn’t pay for that workmanship.
@CarpentryandCarsАй бұрын
Thanks, I appreciate it.
@vincentesolon22102 ай бұрын
Thank you very much. Im a dyi'er in Texas and watching you do the corners and the downspouts was very helpful. Kudos to you sir.
@leolinehan27523 ай бұрын
Hangers spaced too far apart. Hangers are cheap. Use more instead of less.
@CarpentryandCars2 ай бұрын
True I agree but theres very little sq ft of roof here and I went with less but I shouldve put more in you're right. From gutter guys with more experience than me ive been taught that 3ft apart is "standard" now, but thats just what ive been taught, I could be wrong
@nicholaspacheco45544 ай бұрын
Sir you hang some ugly gutters, if you want to be a professional let my guys teach you ! Just bc you THINK you know doesn’t mean you do. Too many screws on your mitres, laziness, not enough hangers and you probably charge cheap. It was a headache hearing you say “that’s just the way I do it “ or “I’ve never had any problems”. Have some standards.
@CarpentryandCars4 ай бұрын
I appreciate it
@imyanigmw4 ай бұрын
Sick 🔥🔥🔥
@JohnDoe-td2wz5 ай бұрын
Why is your guillotine handle on the opposite side of your controls. I would change that so you could make your cut without walking around the gutter.
@CarpentryandCars2 ай бұрын
Honestly I dont know why ive kept it on the opposite side but you are correct I will defiently change it thanks
@rfwjamaell5 ай бұрын
What’s your instagram could u give some tips on building mines I just bought one and I’m going for a similar look
@michaelfajans63315 ай бұрын
Very good video I can't twll is the back of the gutter tucked behind the drip edge ? Thank you
@CarpentryandCars5 ай бұрын
Yeah the gutter is behind the drip edge, theres never a situation where the gutter wouldnt be behind the drip edge. It would just leak if the back wasnt installed behind
@vincentesolon22102 ай бұрын
In Texas my house is build in 1997. The used wood 1x2 instead of drip edge. Drip edge is now code with my new roof. I have installed my gutters under the 1x2 and plan to rip the metal gutters bottom say 1.5 " and slip under the drip edge to ensure the water does not drop down the facia.
@OhThatsLeek5 ай бұрын
Exhaust tip size ?
@rogerpedrosa18546 ай бұрын
Nice little set-up for weekend warrior. 👊
@lowkeyg35307 ай бұрын
Where did you get all your carbon interior pieces ?
@itstoxic_light48497 ай бұрын
this is so hard this is now inso for my g37
@kentrellhines41748 ай бұрын
🔥🔥🔥where did you get your front lip
@sonnybee82718 ай бұрын
I looked at about 7 videos on installing gutters and they all exp;ain in their point of view cause they done it soo many times that they overlook some of the simple things that a diy might know.Like hwo far under the apron does it go ,or does it go under the apron .I have a 1x2 on my facia which mkes a gap.they don't explain that part??
@dacostaedwards162510 ай бұрын
Do you have the link to where you purchased the led emblem ?
Its a bit expensive, I would consider the hand punch if your only doing it for your own home.
@abadtazi10 ай бұрын
Open wrench holder where did you buy it? Thanks
@devenwerts360010 ай бұрын
did you get the carbon hood wrapped with ppf?
@CarpentryandCars10 ай бұрын
I shouldve but I didnt, its held up fine since I keep it mostly parked in a garage though
@Thatboyjhit10 ай бұрын
Please post the process with the supercharger homie I honestly can’t wait to see that 👍👍
@mylarhyrule90410 ай бұрын
Pro tech for 10 years…. Looks like you have a decent setup there…. Buy them as you need them and you won’t wind up with extra tools…. Tekton and icon are two brands I have in my box at work…. Both have shortcomings but both are brands i will buy more from in the future…. Good job
@CarpentryandCars10 ай бұрын
I appreciate the words, I have definitely bought some things without needing them for sure. It’s good to hear that a pro uses similar tools as well
@saulreynoso437110 ай бұрын
Great video. I am a new home owner and want to put some gutters myself, but I am a little nervous. Watching your video gives me the confidence that I need to proceed. Great job at explaining. Thanks.
@CarpentryandCars10 ай бұрын
I’m glad the video helped at all! If you have any questions or things you run into feel free to ask.
@juanoviol297710 ай бұрын
Im in the same situation. But I would like to get the gutter maker machine maker
@BlakeMoore-vx5mr4 ай бұрын
Hey brother great video. I got a question on inside box miter. How short do you run on a 6 inch k style inside box miter?
@alwayshoopin110 ай бұрын
very nice car
@tylerboss779210 ай бұрын
They did make the G37 XS sedan in manual they are just rare.
@vq.r3ll10 ай бұрын
I'll be waiting on the supercharge video 💪🏾🔥
@diachiwest180410 ай бұрын
Can’t wait to buy mine
@isai.955310 ай бұрын
What is that wrap called or paint ?
@HustleHabit11 ай бұрын
That's a nice build you're putting together. Glad to see someone with some forethought. I'll subscribe to see the progress
@Maybaby195911 ай бұрын
Now it looks like a mustang from the front
@jeanca042611 ай бұрын
Hey what is your rims size?
@thehashmob11 ай бұрын
2011 G37x coupe, also hate chrome. Good looking G. Get the red start button.
@traprrrr11 ай бұрын
clean build brother
@bnote199011 ай бұрын
Beautiful G37…stealthy, classy, clean, nothing too flashy or crazy
@imxbanana475111 ай бұрын
Do you have a link for the LED emblem and grill they look so clean together
@TheDemocultis11 ай бұрын
You called that turbo a supercharger 5 whole ass times. No you should not do that yourself. Maybe not at all.
@CarpentryandCars11 ай бұрын
wow you really think you're right too lol thats funny
@NoBrakezQ11 ай бұрын
Say what you want but when you put a VQ in the right hands of a competent owner they can be fuckin awesome and this car is that you have a beautiful machine now I want the sedan 37 because I seen how nice they can look keep it up 🫡💪🏾
@macbac993111 ай бұрын
Hell yeah brotha shits beautiful it ain’t riced out. Pls continue to post about the car. You should upload some pulls and exhaust clips too I got a g and I’m tryin to see how it’d be to mod it out
@Bagtalkdom11 ай бұрын
What tint % you have g
@CarpentryandCars11 ай бұрын
20% all the way around
@mrmoto768211 ай бұрын
Four ratchets! Simple and to the point! Like your set up.
I dont have ig actually this is the first time ive posted anything about the car
@lllIl18711 ай бұрын
nerd
@prod.phenom121111 ай бұрын
Do u recommend doing your own mods or going to a shop
@CarpentryandCars11 ай бұрын
I think its good to learn to do it yourself, you'll save alot of money and know how to fix stuff when it brakes
@user-rr4hr7bz7n11 ай бұрын
How are the Milwaukee stuff holding up ?? My sockets after a year are still great Wrenches still good with chrome has scratching lol but still does the job fine. Their vice grips to me could be better ….the teeth wear down some what quick.
@CarpentryandCars11 ай бұрын
everything milwaukee has held up well actually, I dont use the vice grips enough to see too much waear on the teeth yet but nothing has broken or anything like that
@user-rr4hr7bz7n11 ай бұрын
@@CarpentryandCars that’s good to know because I’m trying out a lot of stuff because the price is nice and most of it is Taiwan so that’s a good place too. Not that I hate tool trucks not really because I have snap on tools but some stuff just no thank you haha
@Max_Pade11 ай бұрын
Needs a fat spoiler
@user-rr4hr7bz7n11 ай бұрын
Everyone love to hate Milwaukee hand tools and I don’t get why??? Yes other brands make a very similar product and typically but not always Taiwan made and yet they’re okay and happy with the other brand from Taiwan but yet miwlaukee is junk?? I don’t get it I don’t think they’re junk I have Milwaukee wrenches sockets a few ratchets hand full of vice grips , drill bits , hex bits etc etc and all my Electric stuff too. People say junk I say what ever because it cost a fraction for a tool truck tool and I sue them ever day on class 8 trucks and trailers and the hold up just fine.
@EvanLugin11 ай бұрын
I can tell you why - certain group of people in this industry/hobby intend to have brand loyalty purposely for the reasons they don’t even know. Yes, Snap on and Matco die hard fan boys are the most of them, when a $200 Milwaukee impact beat the snot of their beloved $1k snap on matco, they thought it was the end of the world especially they were still paying that loans. Now in recent times, Milwaukee, Gearwrench and whole bunch of made in Taiwan and China hand tools performing 80-90% of their still-paying-loan snap on or Matco for the price of 1/5-1/3. They finally can’t take it anymore, the hand tools segment is literally their last hope. Not only for the “good old times” but mostly for the money they still owe. That’s why.
@user-rr4hr7bz7n11 ай бұрын
@@EvanLugin don’t get me wrong as much as I love my Milwaukee hand tools (sockets, wrenches, few ratchets and vice grips) I know they’re not perfect and the brand on the side of the tool isn’t indicative of the brand (icon and Milwaukee wrenches feature the same open end but other than that the design is different so yes they’re brothers from the same factory in Taiwan) but my point is they get my job done just fine every day and I’m not some DIY’er I work on diesel truck and trailers every day (fleet maintenance) do I own snap on tools? I absolutely do because SOMETIMES you just gotta even for the price but I only buy snap on when I need to. If I can find ANY brand specially Taiwan made and it’s gets the job done I’m buying it
@EvanLugin11 ай бұрын
@@user-rr4hr7bz7n Nah man you have got me wrong, I wasn't saying Snap On or Matco was bad, in fact, they were great, if not, the best. They can charge whatever they want and people still buying them, cash or not, they did it willingly. My post was to answer your original post saying "you don't get why people love to hate Milwaukee hand tools". Not gonna repeat myself here but yeah, you got the idea.
@user-rr4hr7bz7n11 ай бұрын
@@EvanLugin I got you correct man ie as just kinda ranting that’s all, yes I know they (snap on and Mac) make good tools and yes I know a lot of mid level manufactures stepped it up and yea I get it they only have little to cling to but what I’m getting at is the snobby ness to anyone not using super expensive tools as if the tools make the mechanic and yeah we both know it doesn’t but the fanboy ness has run rampant and is really toxic I just rhetorically don’t get it that’s all
@EvanLugin11 ай бұрын
@@user-rr4hr7bz7n I should’ve put a Caution This Is a Rant line before my words
Пікірлер
🔥🔥🔥 bro
where can you find that hole punch?
Thank You very Much this is the best diy gutter installation i seen yet it i will definitely be using as a reference as i install my gutters myself
I sure hope you don’t install eavestrough for a living. I wouldn’t pay for that workmanship.
Thanks, I appreciate it.
Thank you very much. Im a dyi'er in Texas and watching you do the corners and the downspouts was very helpful. Kudos to you sir.
Hangers spaced too far apart. Hangers are cheap. Use more instead of less.
True I agree but theres very little sq ft of roof here and I went with less but I shouldve put more in you're right. From gutter guys with more experience than me ive been taught that 3ft apart is "standard" now, but thats just what ive been taught, I could be wrong
Sir you hang some ugly gutters, if you want to be a professional let my guys teach you ! Just bc you THINK you know doesn’t mean you do. Too many screws on your mitres, laziness, not enough hangers and you probably charge cheap. It was a headache hearing you say “that’s just the way I do it “ or “I’ve never had any problems”. Have some standards.
I appreciate it
Sick 🔥🔥🔥
Why is your guillotine handle on the opposite side of your controls. I would change that so you could make your cut without walking around the gutter.
Honestly I dont know why ive kept it on the opposite side but you are correct I will defiently change it thanks
What’s your instagram could u give some tips on building mines I just bought one and I’m going for a similar look
Very good video I can't twll is the back of the gutter tucked behind the drip edge ? Thank you
Yeah the gutter is behind the drip edge, theres never a situation where the gutter wouldnt be behind the drip edge. It would just leak if the back wasnt installed behind
In Texas my house is build in 1997. The used wood 1x2 instead of drip edge. Drip edge is now code with my new roof. I have installed my gutters under the 1x2 and plan to rip the metal gutters bottom say 1.5 " and slip under the drip edge to ensure the water does not drop down the facia.
Exhaust tip size ?
Nice little set-up for weekend warrior. 👊
Where did you get all your carbon interior pieces ?
this is so hard this is now inso for my g37
🔥🔥🔥where did you get your front lip
I looked at about 7 videos on installing gutters and they all exp;ain in their point of view cause they done it soo many times that they overlook some of the simple things that a diy might know.Like hwo far under the apron does it go ,or does it go under the apron .I have a 1x2 on my facia which mkes a gap.they don't explain that part??
Do you have the link to where you purchased the led emblem ?
www.amazon.com/gp/product/B07L9W9SP4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Who makes the gutter punch that you use and where did you get it ? Thanks
www.lynchaluminum.com/product/3-x-4-lynch-rectangular-punch-kit/
Its a bit expensive, I would consider the hand punch if your only doing it for your own home.
Open wrench holder where did you buy it? Thanks
did you get the carbon hood wrapped with ppf?
I shouldve but I didnt, its held up fine since I keep it mostly parked in a garage though
Please post the process with the supercharger homie I honestly can’t wait to see that 👍👍
Pro tech for 10 years…. Looks like you have a decent setup there…. Buy them as you need them and you won’t wind up with extra tools…. Tekton and icon are two brands I have in my box at work…. Both have shortcomings but both are brands i will buy more from in the future…. Good job
I appreciate the words, I have definitely bought some things without needing them for sure. It’s good to hear that a pro uses similar tools as well
Great video. I am a new home owner and want to put some gutters myself, but I am a little nervous. Watching your video gives me the confidence that I need to proceed. Great job at explaining. Thanks.
I’m glad the video helped at all! If you have any questions or things you run into feel free to ask.
Im in the same situation. But I would like to get the gutter maker machine maker
Hey brother great video. I got a question on inside box miter. How short do you run on a 6 inch k style inside box miter?
very nice car
They did make the G37 XS sedan in manual they are just rare.
I'll be waiting on the supercharge video 💪🏾🔥
Can’t wait to buy mine
What is that wrap called or paint ?
That's a nice build you're putting together. Glad to see someone with some forethought. I'll subscribe to see the progress
Now it looks like a mustang from the front
Hey what is your rims size?
2011 G37x coupe, also hate chrome. Good looking G. Get the red start button.
clean build brother
Beautiful G37…stealthy, classy, clean, nothing too flashy or crazy
Do you have a link for the LED emblem and grill they look so clean together
You called that turbo a supercharger 5 whole ass times. No you should not do that yourself. Maybe not at all.
wow you really think you're right too lol thats funny
Say what you want but when you put a VQ in the right hands of a competent owner they can be fuckin awesome and this car is that you have a beautiful machine now I want the sedan 37 because I seen how nice they can look keep it up 🫡💪🏾
Hell yeah brotha shits beautiful it ain’t riced out. Pls continue to post about the car. You should upload some pulls and exhaust clips too I got a g and I’m tryin to see how it’d be to mod it out
What tint % you have g
20% all the way around
Four ratchets! Simple and to the point! Like your set up.
I appreciate it, I try to keep it simple
Solid set up
Whare did you get the top at ?
www.lowes.com/pd/ProSteel-30-in-W-x-24-in-H-Steel-Tool-Chest-Black/1002860172
Cleannnn what’s ur ig for the g?
I dont have ig actually this is the first time ive posted anything about the car
nerd
Do u recommend doing your own mods or going to a shop
I think its good to learn to do it yourself, you'll save alot of money and know how to fix stuff when it brakes
How are the Milwaukee stuff holding up ?? My sockets after a year are still great Wrenches still good with chrome has scratching lol but still does the job fine. Their vice grips to me could be better ….the teeth wear down some what quick.
everything milwaukee has held up well actually, I dont use the vice grips enough to see too much waear on the teeth yet but nothing has broken or anything like that
@@CarpentryandCars that’s good to know because I’m trying out a lot of stuff because the price is nice and most of it is Taiwan so that’s a good place too. Not that I hate tool trucks not really because I have snap on tools but some stuff just no thank you haha
Needs a fat spoiler
Everyone love to hate Milwaukee hand tools and I don’t get why??? Yes other brands make a very similar product and typically but not always Taiwan made and yet they’re okay and happy with the other brand from Taiwan but yet miwlaukee is junk?? I don’t get it I don’t think they’re junk I have Milwaukee wrenches sockets a few ratchets hand full of vice grips , drill bits , hex bits etc etc and all my Electric stuff too. People say junk I say what ever because it cost a fraction for a tool truck tool and I sue them ever day on class 8 trucks and trailers and the hold up just fine.
I can tell you why - certain group of people in this industry/hobby intend to have brand loyalty purposely for the reasons they don’t even know. Yes, Snap on and Matco die hard fan boys are the most of them, when a $200 Milwaukee impact beat the snot of their beloved $1k snap on matco, they thought it was the end of the world especially they were still paying that loans. Now in recent times, Milwaukee, Gearwrench and whole bunch of made in Taiwan and China hand tools performing 80-90% of their still-paying-loan snap on or Matco for the price of 1/5-1/3. They finally can’t take it anymore, the hand tools segment is literally their last hope. Not only for the “good old times” but mostly for the money they still owe. That’s why.
@@EvanLugin don’t get me wrong as much as I love my Milwaukee hand tools (sockets, wrenches, few ratchets and vice grips) I know they’re not perfect and the brand on the side of the tool isn’t indicative of the brand (icon and Milwaukee wrenches feature the same open end but other than that the design is different so yes they’re brothers from the same factory in Taiwan) but my point is they get my job done just fine every day and I’m not some DIY’er I work on diesel truck and trailers every day (fleet maintenance) do I own snap on tools? I absolutely do because SOMETIMES you just gotta even for the price but I only buy snap on when I need to. If I can find ANY brand specially Taiwan made and it’s gets the job done I’m buying it
@@user-rr4hr7bz7n Nah man you have got me wrong, I wasn't saying Snap On or Matco was bad, in fact, they were great, if not, the best. They can charge whatever they want and people still buying them, cash or not, they did it willingly. My post was to answer your original post saying "you don't get why people love to hate Milwaukee hand tools". Not gonna repeat myself here but yeah, you got the idea.
@@EvanLugin I got you correct man ie as just kinda ranting that’s all, yes I know they (snap on and Mac) make good tools and yes I know a lot of mid level manufactures stepped it up and yea I get it they only have little to cling to but what I’m getting at is the snobby ness to anyone not using super expensive tools as if the tools make the mechanic and yeah we both know it doesn’t but the fanboy ness has run rampant and is really toxic I just rhetorically don’t get it that’s all
@@user-rr4hr7bz7n I should’ve put a Caution This Is a Rant line before my words
Where did you get the sport bumper add on
www.z1motorsports.com/front-bumper/infiniti/oem-10-infiniti-g37-sedan-sport-front-lip-p-42244.html?list_name=SearchResults&oid=42244%3A0%3A83740%3A11&qid=bff879dd606d6004c2c983ae4b786c94