You have it looking real nice now. Keep up the good work.
@Halffast7192 күн бұрын
Thank you. More parts to come.
@suzannamurray27514 күн бұрын
Hey mate, Did you end up doing a follow up video. Keen to see how it turned out. Where you happy with the results? Cheers
@Halffast7194 күн бұрын
I can’t remember if I did a follow up video but I’m sure it’s out there. The car got 3mpgs better and the oil looked a lot cleaner. I don’t have the q7 anymore but I do have an A6 TDI and I have yet to delete it and do carbon cleaning. Probably this winter I’ll do it.
@longhuynh52495 күн бұрын
Hi Hallfast, I am motivated to do this job on my Q7, 2006. Would you please help me with parr removal order to get to oil cooler adapter. Thanks in advance. Lastly, where did you buy seals and plastic connectors?
@Halffast7193 күн бұрын
@@longhuynh5249 I believe this is the video with the breakdown. kzread.info/dash/bejne/Y6OKmpR7nsLMntY.htmlsi=hJuupc8G8qUO0Cer
@scott-gy6fe11 күн бұрын
I'm in California. Two dodge diesels, a 96 and 2005. Was smog station owner three years . Stupidity is alive and rampant in commie California 🤡, don't come here, move here and when ca people move out we don't need grief from resident of other states.
@andydelassus273412 күн бұрын
I also got the P208A 🤨 Decided it was time, and purchased the “AdBlue Off” add-on through TZ. Was still getting the CEL, and I learned from tech-support that the pump can throw its own codes independently of the ecu. Pulled a few of the AdBlue associated fuses, and that did the trick. No CEL!
@Halffast71911 күн бұрын
That’s good to know for when I do my delete and tune.
@jeromehope582314 күн бұрын
there is no caster camber adj. on your dodge other than axle angle or worn king pin bearings.
@Halffast71914 күн бұрын
Definitely no camber but axle angle is caster.
@jeromehope582314 күн бұрын
So, if CA renewed like they should, they could make more $. Stupid CA. I am not proud to be a 3rd gen San Diegan.
@Halffast71913 күн бұрын
Yeah they’re stupid. Should be offering everyone registration but they don’t want money apparently.
@onenglen14 күн бұрын
Time for a massive bonfire and some good food from the Traeger!!!!!
@Halffast71914 күн бұрын
Haaaaa all of California is a bonfire right now.
@musk-eteer989815 күн бұрын
110*F in so cal. WTH
@Halffast71915 күн бұрын
Yeah. Where I’m at the highest recorded was 111° in 1953. Did you know if you hold the number zero down you can get the degree symbol instead of using the asterisk symbol?
@jacobbieganowski913619 күн бұрын
Don't get Chinese end mills, make sure they're carbide. Slow is accurate and accurate is fast in this case, and lube it up. When bits get hot they wear out fast so if you need to let it cool intermittently
@Halffast71919 күн бұрын
All great advice. Thanks, we appreciate it.
@veggielord21 күн бұрын
I wipe my thermometer every time. The grease builds up and throws off the temperature.
@cnbr49422 күн бұрын
Thank you!
@bindthedevilloosetheangels25 күн бұрын
4:26 really dude.
@Halffast71925 күн бұрын
I’m not seeing what you’re talking about.
@bindthedevilloosetheangels25 күн бұрын
@@Halffast719 sound effects..... Nice gen 2 harbor freight 72" box. I have the same one. Never thought I would fill it up but it's full. as well as a side cart.
@Halffast71924 күн бұрын
@bindthedevilloosetheangels haha oh nice. Yeah mines full too along with 3 rolling tool carts. You can never have enough tools, it the storage that gets you. Oh I hear that hawk thaw noise now. Hahahaha
@bindthedevilloosetheangels23 күн бұрын
@@Halffast719 🤦♂
@MC-kb6zp25 күн бұрын
Did you say $64 for the grease fittings!? If so I think you got robbed.
@Halffast71925 күн бұрын
At tractor supply there was a kit for $64. There’s no way I would spend that much haha. No I didn’t buy them.
@jeremynguyen234625 күн бұрын
Hey 👋
@gdfschimpi00725 күн бұрын
damn dude... I wonder why those swivels were marked down for a complete set. Talk about a steal.
@Halffast71925 күн бұрын
That’s what I said. Usually open box is missing something but I’m not complaining haha.
@countrywideroadsideassistance26 күн бұрын
Sweet!
@juanherrera267227 күн бұрын
Whats the main benefit to the heat wrap? Just less heat to the car ?
@Halffast71927 күн бұрын
Yeah it keeps the floor and firewall cooler. Less heat in the engine compartment too. You don’t want your engine sucking in too much hot air.
@RE-TRANKI27 күн бұрын
Hablas como michael jackson
@Halffast71927 күн бұрын
Thanks. You look like Katlin Jenner. Gracias. Te pareces a Katlin Jenner.
@harry513627 күн бұрын
Anyone know where I can find one of these outside the US?
@nathanielstraus200327 күн бұрын
Any update on the run time? How long has it been able to pull fuel? Have you had any issues when the tank is less full?
@Halffast71927 күн бұрын
I have it connected to my return fuel line which sits right at the 1/4 tank mark. So when I fuel tank gets to 1/4 tank it can’t pull fuel anymore. I ran it for 4-5 hours on a full tank and the needle never moved.
@juanherrera267228 күн бұрын
Do you know if the engine has an egt pyro pre turbo on obd2 ? Any perticular reason u went with the pipe with less sensors or are those pointless to have after delete?
@Halffast71928 күн бұрын
Yes there is and here’s a link parts.audiusa.com/p/Audi_2015_Q7/Exhaust-Gas-Temperature-EGT-Sensor/51113251/059906088CL.html I went with no sensors because they’re deleted in the ecu. The car is gonna have more soot going through the exhaust and not through the egr so I didn’t want to plug the sensors up.
@juanherrera2672Ай бұрын
Where do you get the oil drain valve ?
@Halffast719Ай бұрын
eBay Stahlbus is the name.
@jorgeguevara9310Ай бұрын
How did you set the egr one?
@Halffast719Ай бұрын
Honestly if you got a heavy trailer, tow it around for 200 miles. Probably the fastest way you’ll get them set.
@juanherrera2672Ай бұрын
Down pipe worth it ? Hows the small ?
@Halffast719Ай бұрын
Definitely worth it. I think you mean smell? Smells way better the burning DEF that chokes you out.
@juliantorres8664Ай бұрын
Turn down, turn down for what
@Halffast719Ай бұрын
Exactly my friend hahaha
@victorortega2718Ай бұрын
You dont have to support or jack the car at all to do the rear shocks ?I'm doing this on my 1500 just want to make sure nothing is going to drop on me
@Halffast719Ай бұрын
No you’re fine to do them without jacks, jack stands or blocks.
@tabuilderАй бұрын
This guy is what's known as the village idiot.
@ackack612Ай бұрын
...listening to this guy is akin to watching paint dry. Painful.
@Halffast719Ай бұрын
Ok and your point is? The joys of KZread is you can skip my videos and go watch someone else’s videos. Do you want me to make a how to video for you? How to skip videos on KZread for degenerates. That’s what I call it for you.
@onenglenАй бұрын
@@Halffast719 Hey.... as long as they watch all the way to the end... and comment. Keep em coming!
@ackack612Ай бұрын
@@Halffast719 "point is..." you suck as a content provider, but humorous.
@Halffast719Ай бұрын
@onenglen hahaha exactly. These nerds.
@DieselRamchargerАй бұрын
clickbait
@Halffast719Ай бұрын
Ok and? Haha hooked ya didn’t I?
@DieselRamchargerАй бұрын
@@Halffast719 nope blocked the channel
@Halffast719Ай бұрын
@DieselRamcharger haha good don’t need you anyway.
@onenglenАй бұрын
@@Halffast719 OneNGlen LOVING the channel! Keep em flowing brother
@Halffast719Ай бұрын
@onenglen thanks. You know I will.
@msrhoosta9096Ай бұрын
What’re the pellets you’re using?
@Halffast719Ай бұрын
Traeger Pro Blend.
@j1j1j1j1j1Ай бұрын
is halffast a play on words for half-assed or was that by accident. either way it fits :D
@Halffast719Ай бұрын
Exactly correct haha.
@Jayfive2028Ай бұрын
Send me site link
@ketchupdnbАй бұрын
When you gonna cook the tri tip? I love tri tip. Went to pismo last week. Windy as heck on Sunday. Love the big Al shirt!
@Halffast719Ай бұрын
Big Al’s use to be some good eats until the owner died. True tip maybe this Sunday but still not sure. Yeah it was really windy in Roseville on Tuesday all the way home.
@King-Bob-on-the-RocksАй бұрын
Nice, thanks for showing this tiny Rig. I Love to bulid them, its a Kind of Meditation to me. This force you to come down or you louse to much parts 😉 you know. A View Beers are a good Tool too 😅🤔🤣
@Halffast719Ай бұрын
I couldn’t imagine drinking and assembling this tiny rig. I’d loose everything haha. Thanks for watching.
@King-Bob-on-the-RocksАй бұрын
@@Halffast719 everything what relax you helps a Lot and rise Up the fun 😁😎🎉
@Halffast719Ай бұрын
@@King-Bob-on-the-Rocks haha my next one I’ll try
@davidguajardo1105Ай бұрын
We want to see the work to take it off
@Halffast719Ай бұрын
It’s a pain to do that. I’m sure there’s videos out there.
@dennisharrison4744Ай бұрын
Started put loader on mine i change my mind loader will destroy one these small tractors the little stub axle for the front wheels way to small to hold wieght
@Halffast719Ай бұрын
I think you’re 100% correct. I bought mine with the loader installed and the front axle gears already bad. I just keep tightening the nut on top and add gear oil to hopefully prevent any additional damage.
@SteveAustin-ff4znАй бұрын
I sent a rare master cylinder and booster to him and that was received 4/8/24. I called beforehand and was told it would take 3 weeks. It is now 8 weeks, and I cannot get them to answer the phone. The one time they did they put me on hold for 30 minutes, so I called from another line, and they said they'd call me back. Never did and have never answered the phone since.
@Halffast719Ай бұрын
Well that sucks, sorry to hear that. I know he goes to a ton or off-road events and I think he does all the repairs and work by himself. Hopefully he’s just busy and will get to you soon. I didn’t have any issues when I called but that was 3 years ago and people only get older.
@wakeupamerica7559Ай бұрын
Screen is designed to keep your hands and or children's hands from going into the auger. It's a safety guard, just wanted to let everyone know.
@Halffast719Ай бұрын
Thank you. My buddy said to remove it to change out pellets but he didn’t know I had the door on the back that lets you dump them. I guess I should have mentioned that. Definitely a safety feature. I appreciate you bringing that up.
@veggielordАй бұрын
@@Halffast719 Any tips for removing the screws from the safety screen on the grill side of the hopper? I tried but was only able to remove the opposite screws. I stopped because I was nervous about stripping them.
@Halffast719Ай бұрын
There are nuts Ont the screws. They’re basically finger tight, at least mine were.
@knightryder5292Ай бұрын
Hey question What you think of the 1995 dodge 3500 duly two wheel drive V10 diesel . I see your cars are diesel thanks glad to see that old tractor 🚜 😊
@Halffast719Ай бұрын
The v10 I believe is an 8 liter gasoline engine. I’d stay away from. The chassis and transmission are different than what the inline six cylinder 5.9 12 valve Cummins diesel came with too. I’ve seen people put a Cummins in those gas truck frames and it would twist the frame but that’s usually with compound turbos and big injectors.
@dennisharrison4744Ай бұрын
I still got my old ym155d it's a low hour one makes 2 years iv had it realy worked it plowing tilling mowing pulling stumps pulling trailer havnt had any issues always starts uses very little diesel 4x4 works awsome
@Halffast719Ай бұрын
@dennisharrison4744 that’s awesome to hear. I think this one was abused just a little bit.
@ruutskuАй бұрын
I just got the same exact issue with my 2017 Audi Q7. Just about to take it to the shop for diagnose. This was really informative and thank you for sharing the process!
@Halffast719Ай бұрын
You’re welcome. You might have a warranty depending on your mileage. Everything with emissions has an extended warranty so have them check before they try charging you. Mine is way past mileage warranty.
@ruutskuАй бұрын
@@Halffast719 Thanks! Just got the pump fixed. I may have got lucky, there was corroded wiring near the pump, which the technician found and fixed. The pump started reporting back to ECU and developed pressure. Let's see if the fix holds.
@Halffast719Ай бұрын
@@ruutsku that’s awesome to hear. I wish mine was that easy. Haha
@AlexisVillanueva-xi4kcАй бұрын
What kind of trailer is this?
@Halffast719Ай бұрын
It’s a dump trailer. You can put trash, dirt, rock and all sorts of other things in it and open the rear doors to dump it out with the hydraulic lifting ram.
@BosBackyardBBQАй бұрын
Good grill! I use it for my channel! Good investment brother! You ever want to do a cooking colab? Let me know!
@Halffast719Ай бұрын
Haha. I love this grill. I’d do a colab but I have no clue what I’m doing yet.
@farmyardfabАй бұрын
Did you buy this to replace an old gems unit?
@Halffast719Ай бұрын
Yes I did.
@Justme-lq3wv2 ай бұрын
I have the Audi Q7 4L 3.0TDi im trying to change the Alternator I've stripped it down but after taking the 2x 13mm bolts from the face of the alternator it's not budging is it connected to the Ancillary Bracket or am I missing something it's 11pm in the UK and I'm stuck any help would be appreciated
@Halffast719Ай бұрын
I’d watch this. Seems like a lot of work. kzread.info/dash/bejne/gZmm2Kxyp6yro9I.htmlsi=IpoEQwX230VNkAt1
@quewat36762 ай бұрын
So basically just drill the rotors ..add spacers (washers)..to the wheel studs so air flow can keep the bearings cool..and not overheat..instead of buying this?...damn..i got 2016 ram 2500 4x4..with 22x14 wheels and ive replaced the wheel hubs once..with 184k...im good
@Halffast7192 ай бұрын
Yeah pretty much. And get an adapter for the stub shaft to go from ram to ford or maybe just get a ford stub shaft with a special u-joint. My plan if one of these bearings fails is just go get a timken ford wheel bearing and take it to a machine shop since I have the adapter.
@Gene46662 ай бұрын
Does anyone make a Oil cooler kit that relocates it near the Radiator? Sooo much plastic and I can't believe no one made replacement upgraded parts for these cars which were $100K new.
@jrcoke2 ай бұрын
How you take out the the shaft
@johnnielingo53682 ай бұрын
Talk like Trump
@Halffast7192 ай бұрын
Is this a question or a statement? Do you want me to talk like Trump or I do talk like Trump? Your accent is too strong to tell.
@abrahamg40052 ай бұрын
Who’s getting 38 MPG? Highest I’ve seen is upper 20’s
@Halffast7192 ай бұрын
I take it your diesel wasn’t deleted and driving 800 miles in one day because I was getting 38mpg. I’m getting 44mpg in my A6 TDI 80mph 450 miles in one day, every other week.
Пікірлер
You have it looking real nice now. Keep up the good work.
Thank you. More parts to come.
Hey mate, Did you end up doing a follow up video. Keen to see how it turned out. Where you happy with the results? Cheers
I can’t remember if I did a follow up video but I’m sure it’s out there. The car got 3mpgs better and the oil looked a lot cleaner. I don’t have the q7 anymore but I do have an A6 TDI and I have yet to delete it and do carbon cleaning. Probably this winter I’ll do it.
Hi Hallfast, I am motivated to do this job on my Q7, 2006. Would you please help me with parr removal order to get to oil cooler adapter. Thanks in advance. Lastly, where did you buy seals and plastic connectors?
@@longhuynh5249 I believe this is the video with the breakdown. kzread.info/dash/bejne/Y6OKmpR7nsLMntY.htmlsi=hJuupc8G8qUO0Cer
I'm in California. Two dodge diesels, a 96 and 2005. Was smog station owner three years . Stupidity is alive and rampant in commie California 🤡, don't come here, move here and when ca people move out we don't need grief from resident of other states.
I also got the P208A 🤨 Decided it was time, and purchased the “AdBlue Off” add-on through TZ. Was still getting the CEL, and I learned from tech-support that the pump can throw its own codes independently of the ecu. Pulled a few of the AdBlue associated fuses, and that did the trick. No CEL!
That’s good to know for when I do my delete and tune.
there is no caster camber adj. on your dodge other than axle angle or worn king pin bearings.
Definitely no camber but axle angle is caster.
So, if CA renewed like they should, they could make more $. Stupid CA. I am not proud to be a 3rd gen San Diegan.
Yeah they’re stupid. Should be offering everyone registration but they don’t want money apparently.
Time for a massive bonfire and some good food from the Traeger!!!!!
Haaaaa all of California is a bonfire right now.
110*F in so cal. WTH
Yeah. Where I’m at the highest recorded was 111° in 1953. Did you know if you hold the number zero down you can get the degree symbol instead of using the asterisk symbol?
Don't get Chinese end mills, make sure they're carbide. Slow is accurate and accurate is fast in this case, and lube it up. When bits get hot they wear out fast so if you need to let it cool intermittently
All great advice. Thanks, we appreciate it.
I wipe my thermometer every time. The grease builds up and throws off the temperature.
Thank you!
4:26 really dude.
I’m not seeing what you’re talking about.
@@Halffast719 sound effects..... Nice gen 2 harbor freight 72" box. I have the same one. Never thought I would fill it up but it's full. as well as a side cart.
@bindthedevilloosetheangels haha oh nice. Yeah mines full too along with 3 rolling tool carts. You can never have enough tools, it the storage that gets you. Oh I hear that hawk thaw noise now. Hahahaha
@@Halffast719 🤦♂
Did you say $64 for the grease fittings!? If so I think you got robbed.
At tractor supply there was a kit for $64. There’s no way I would spend that much haha. No I didn’t buy them.
Hey 👋
damn dude... I wonder why those swivels were marked down for a complete set. Talk about a steal.
That’s what I said. Usually open box is missing something but I’m not complaining haha.
Sweet!
Whats the main benefit to the heat wrap? Just less heat to the car ?
Yeah it keeps the floor and firewall cooler. Less heat in the engine compartment too. You don’t want your engine sucking in too much hot air.
Hablas como michael jackson
Thanks. You look like Katlin Jenner. Gracias. Te pareces a Katlin Jenner.
Anyone know where I can find one of these outside the US?
Any update on the run time? How long has it been able to pull fuel? Have you had any issues when the tank is less full?
I have it connected to my return fuel line which sits right at the 1/4 tank mark. So when I fuel tank gets to 1/4 tank it can’t pull fuel anymore. I ran it for 4-5 hours on a full tank and the needle never moved.
Do you know if the engine has an egt pyro pre turbo on obd2 ? Any perticular reason u went with the pipe with less sensors or are those pointless to have after delete?
Yes there is and here’s a link parts.audiusa.com/p/Audi_2015_Q7/Exhaust-Gas-Temperature-EGT-Sensor/51113251/059906088CL.html I went with no sensors because they’re deleted in the ecu. The car is gonna have more soot going through the exhaust and not through the egr so I didn’t want to plug the sensors up.
Where do you get the oil drain valve ?
eBay Stahlbus is the name.
How did you set the egr one?
Honestly if you got a heavy trailer, tow it around for 200 miles. Probably the fastest way you’ll get them set.
Down pipe worth it ? Hows the small ?
Definitely worth it. I think you mean smell? Smells way better the burning DEF that chokes you out.
Turn down, turn down for what
Exactly my friend hahaha
You dont have to support or jack the car at all to do the rear shocks ?I'm doing this on my 1500 just want to make sure nothing is going to drop on me
No you’re fine to do them without jacks, jack stands or blocks.
This guy is what's known as the village idiot.
...listening to this guy is akin to watching paint dry. Painful.
Ok and your point is? The joys of KZread is you can skip my videos and go watch someone else’s videos. Do you want me to make a how to video for you? How to skip videos on KZread for degenerates. That’s what I call it for you.
@@Halffast719 Hey.... as long as they watch all the way to the end... and comment. Keep em coming!
@@Halffast719 "point is..." you suck as a content provider, but humorous.
@onenglen hahaha exactly. These nerds.
clickbait
Ok and? Haha hooked ya didn’t I?
@@Halffast719 nope blocked the channel
@DieselRamcharger haha good don’t need you anyway.
@@Halffast719 OneNGlen LOVING the channel! Keep em flowing brother
@onenglen thanks. You know I will.
What’re the pellets you’re using?
Traeger Pro Blend.
is halffast a play on words for half-assed or was that by accident. either way it fits :D
Exactly correct haha.
Send me site link
When you gonna cook the tri tip? I love tri tip. Went to pismo last week. Windy as heck on Sunday. Love the big Al shirt!
Big Al’s use to be some good eats until the owner died. True tip maybe this Sunday but still not sure. Yeah it was really windy in Roseville on Tuesday all the way home.
Nice, thanks for showing this tiny Rig. I Love to bulid them, its a Kind of Meditation to me. This force you to come down or you louse to much parts 😉 you know. A View Beers are a good Tool too 😅🤔🤣
I couldn’t imagine drinking and assembling this tiny rig. I’d loose everything haha. Thanks for watching.
@@Halffast719 everything what relax you helps a Lot and rise Up the fun 😁😎🎉
@@King-Bob-on-the-Rocks haha my next one I’ll try
We want to see the work to take it off
It’s a pain to do that. I’m sure there’s videos out there.
Started put loader on mine i change my mind loader will destroy one these small tractors the little stub axle for the front wheels way to small to hold wieght
I think you’re 100% correct. I bought mine with the loader installed and the front axle gears already bad. I just keep tightening the nut on top and add gear oil to hopefully prevent any additional damage.
I sent a rare master cylinder and booster to him and that was received 4/8/24. I called beforehand and was told it would take 3 weeks. It is now 8 weeks, and I cannot get them to answer the phone. The one time they did they put me on hold for 30 minutes, so I called from another line, and they said they'd call me back. Never did and have never answered the phone since.
Well that sucks, sorry to hear that. I know he goes to a ton or off-road events and I think he does all the repairs and work by himself. Hopefully he’s just busy and will get to you soon. I didn’t have any issues when I called but that was 3 years ago and people only get older.
Screen is designed to keep your hands and or children's hands from going into the auger. It's a safety guard, just wanted to let everyone know.
Thank you. My buddy said to remove it to change out pellets but he didn’t know I had the door on the back that lets you dump them. I guess I should have mentioned that. Definitely a safety feature. I appreciate you bringing that up.
@@Halffast719 Any tips for removing the screws from the safety screen on the grill side of the hopper? I tried but was only able to remove the opposite screws. I stopped because I was nervous about stripping them.
There are nuts Ont the screws. They’re basically finger tight, at least mine were.
Hey question What you think of the 1995 dodge 3500 duly two wheel drive V10 diesel . I see your cars are diesel thanks glad to see that old tractor 🚜 😊
The v10 I believe is an 8 liter gasoline engine. I’d stay away from. The chassis and transmission are different than what the inline six cylinder 5.9 12 valve Cummins diesel came with too. I’ve seen people put a Cummins in those gas truck frames and it would twist the frame but that’s usually with compound turbos and big injectors.
I still got my old ym155d it's a low hour one makes 2 years iv had it realy worked it plowing tilling mowing pulling stumps pulling trailer havnt had any issues always starts uses very little diesel 4x4 works awsome
@dennisharrison4744 that’s awesome to hear. I think this one was abused just a little bit.
I just got the same exact issue with my 2017 Audi Q7. Just about to take it to the shop for diagnose. This was really informative and thank you for sharing the process!
You’re welcome. You might have a warranty depending on your mileage. Everything with emissions has an extended warranty so have them check before they try charging you. Mine is way past mileage warranty.
@@Halffast719 Thanks! Just got the pump fixed. I may have got lucky, there was corroded wiring near the pump, which the technician found and fixed. The pump started reporting back to ECU and developed pressure. Let's see if the fix holds.
@@ruutsku that’s awesome to hear. I wish mine was that easy. Haha
What kind of trailer is this?
It’s a dump trailer. You can put trash, dirt, rock and all sorts of other things in it and open the rear doors to dump it out with the hydraulic lifting ram.
Good grill! I use it for my channel! Good investment brother! You ever want to do a cooking colab? Let me know!
Haha. I love this grill. I’d do a colab but I have no clue what I’m doing yet.
Did you buy this to replace an old gems unit?
Yes I did.
I have the Audi Q7 4L 3.0TDi im trying to change the Alternator I've stripped it down but after taking the 2x 13mm bolts from the face of the alternator it's not budging is it connected to the Ancillary Bracket or am I missing something it's 11pm in the UK and I'm stuck any help would be appreciated
I’d watch this. Seems like a lot of work. kzread.info/dash/bejne/gZmm2Kxyp6yro9I.htmlsi=IpoEQwX230VNkAt1
So basically just drill the rotors ..add spacers (washers)..to the wheel studs so air flow can keep the bearings cool..and not overheat..instead of buying this?...damn..i got 2016 ram 2500 4x4..with 22x14 wheels and ive replaced the wheel hubs once..with 184k...im good
Yeah pretty much. And get an adapter for the stub shaft to go from ram to ford or maybe just get a ford stub shaft with a special u-joint. My plan if one of these bearings fails is just go get a timken ford wheel bearing and take it to a machine shop since I have the adapter.
Does anyone make a Oil cooler kit that relocates it near the Radiator? Sooo much plastic and I can't believe no one made replacement upgraded parts for these cars which were $100K new.
How you take out the the shaft
Talk like Trump
Is this a question or a statement? Do you want me to talk like Trump or I do talk like Trump? Your accent is too strong to tell.
Who’s getting 38 MPG? Highest I’ve seen is upper 20’s
I take it your diesel wasn’t deleted and driving 800 miles in one day because I was getting 38mpg. I’m getting 44mpg in my A6 TDI 80mph 450 miles in one day, every other week.