Hello I'm creating this channel to help teach a little bit about older farm equipment and help people learn some about small-time hay farming I'll be posting content from time time about different tidbits on equipment and repairs and so on
Thanks for the info. I've got the PT7 and smoked the drive belt this spring. Can't wait to change it.
@masapunda29 күн бұрын
is the same binder also in the mf 14 baler?
@smalltimefarming855029 күн бұрын
That I'm not sure I would assume so
@mmarsh1985Ай бұрын
If you take a grinder with a fine grinding wheel you can reach your trip on
@ashleyflint3501Ай бұрын
Great video, wondering if you know what ground speed you operate this machine at ?
@smalltimefarming8550Ай бұрын
I was doing around 3 to 5 miles an hour
@ashleyflint3501Ай бұрын
@@smalltimefarming8550 Thanks, I have one but found it blocked up when cutting oats at 5mph, should have been down a gear I gather .
@smalltimefarming8550Ай бұрын
And make sure your tractor RPMs are up high enough to make sure everything's moving as it should be probably for the crop you're doing you need two three miles an hour
@ashleyflint3501Ай бұрын
@@smalltimefarming8550 Thanks, seems they are a slow machine, used a New Holland 489 conditioner and could sit on 5mph no worries.
@smalltimefarming8550Ай бұрын
Yeah that's one reason I use a John Deere 2280 self-propelled swather now it works a lot better and faster
@malachimalachiiАй бұрын
This video was very helpful! thank you so much!
@kousarkousar9351Ай бұрын
Sir what name of this machine
@smalltimefarming8550Ай бұрын
It's a Massey Ferguson 125 baler
@user-kz2ru6pe2u4 ай бұрын
ممكن خاص لو سمحت
@adelsalah39415 ай бұрын
ممكن خاص...كم السعر
@randomtiktok44019 ай бұрын
Pls make more videos pls
@user-kz2ru6pe2u10 ай бұрын
مرحبا ممكن خاص
@JM-xq2wi11 ай бұрын
Veo que las arrancado sin ningún problema , esa máquina lleva un sensor de seguridad de arranque abajo , por lo que veo igual lo lleva anulado , veo que las arrancado con el volante torcido ,,,
@JM-xq2wi11 ай бұрын
Hola, veo que no llevas acondicionador de rodillos , tranquilo ya le cogerás la marcha , yo le daría 4 vueltas al rededor y luego me pondría al lado más largo y recto posible , con el volante hay que ser menos brusco , pero vamos con tiempo ya verás como la manejas , disfrútala es una joya de máquina , saludos ,,,
@JM-xq2wi11 ай бұрын
Hola , ese motor gasta medio litro de aceite cada 12 horas de trabajo , es normal hasta de nueva gastaba ,,
@JM-xq2wi11 ай бұрын
Hola , que recuerdos me da esa máquina , mi padre compro una en el año 80 nueva , y yo la conducía con 10 años , es una máquina para grandes explotaciones , y tu la tienes nueva , y recuerdo cada tornillo de cada parte de la máquina , se le hizo unas 25.000 horas de trabajo en 12 años , saludos desde SPAIN
@user-kz2ru6pe2u11 күн бұрын
ممكن خاص
@user-is3ur8wm8d Жыл бұрын
Перевод на український
@user-kz2ru6pe2u Жыл бұрын
كم سعرها
@user-kz2ru6pe2u Жыл бұрын
ممكن خاص
@user-kz2ru6pe2u Жыл бұрын
سلام عليكم
@rashellyohn5128 Жыл бұрын
what grade of oil , filter and hydraulic fluid goes into that tractor . I have one that i just got and it needs a change out not sure I want to pay the higher price for the new holland oil if i can get the same quality for less . I just dont have the manual. Thanks
@smalltimefarming8550 Жыл бұрын
hey when i did it i got my oil from wal mart and i think the filter i got there to. i dont remember the oil number but i know i put in a synthetic one
@rashellyohn5128 Жыл бұрын
@@smalltimefarming8550Thanks for your reply
@user-kz2ru6pe2u Жыл бұрын
ممكن خاص
@user-kz2ru6pe2u Жыл бұрын
مرحبا
@user-kz2ru6pe2u Жыл бұрын
ممكن خاص
@smalltimefarming8550 Жыл бұрын
Yes it's very critical to get it all lined up or it doesn't like to tie I've noticed I finally sold this one and I got a Freeman Baylor I'll do a tutorial on that eventually here
@bobocaterpillar3697 Жыл бұрын
we have the same baler. i will say the needle adjustment is CRUCIAL to proper knotter operation
@coltonluthi23452 жыл бұрын
What'd you pay for it? I have a 2280 that is feild ready that I'm going to put on tractorhouse here soon, 2300 hours on mine whats yours have?
@smalltimefarming85502 жыл бұрын
I think I spent around $800 for mine and I would have to look at the hours I don't know how many hours it has but when I got it it was not running and I had to put new tires on it and I also repainted it so now it's a pretty good machine
@smalltimefarming85502 жыл бұрын
It has 1628 hours right now
@user-kz2ru6pe2u11 күн бұрын
ممكن خاص
@RJ1999x2 жыл бұрын
If you treat this like a 135hp fwa tractor you will like it, if you think it's a big 4wd you're going to be disappointed
@zimmhollowfarm84142 жыл бұрын
I wouldn't mind owning a tractor like this someday
@smalltimefarming85502 жыл бұрын
this one is up on facebook market place for sale right now
@zimmhollowfarm84142 жыл бұрын
@@smalltimefarming8550 where are you at
@smalltimefarming85502 жыл бұрын
@@zimmhollowfarm8414 over in WA State
@zimmhollowfarm84142 жыл бұрын
@@smalltimefarming8550 o little far i am in pa
@zimmhollowfarm84143 жыл бұрын
Please keep making videos on this tractor.
@smalltimefarming85503 жыл бұрын
i will try to get more soon
@zimmhollowfarm84143 жыл бұрын
@@smalltimefarming8550 ok thanks
@Theanviljeepjk3 жыл бұрын
Good job 👍 dose the pto work?
@smalltimefarming85503 жыл бұрын
yes the PTO works all the things work on the tractor except for the headlights I got to get new ones replaced on it eventually
Пікірлер
مرحبا
Thanks for the info. I've got the PT7 and smoked the drive belt this spring. Can't wait to change it.
is the same binder also in the mf 14 baler?
That I'm not sure I would assume so
If you take a grinder with a fine grinding wheel you can reach your trip on
Great video, wondering if you know what ground speed you operate this machine at ?
I was doing around 3 to 5 miles an hour
@@smalltimefarming8550 Thanks, I have one but found it blocked up when cutting oats at 5mph, should have been down a gear I gather .
And make sure your tractor RPMs are up high enough to make sure everything's moving as it should be probably for the crop you're doing you need two three miles an hour
@@smalltimefarming8550 Thanks, seems they are a slow machine, used a New Holland 489 conditioner and could sit on 5mph no worries.
Yeah that's one reason I use a John Deere 2280 self-propelled swather now it works a lot better and faster
This video was very helpful! thank you so much!
Sir what name of this machine
It's a Massey Ferguson 125 baler
ممكن خاص لو سمحت
ممكن خاص...كم السعر
Pls make more videos pls
مرحبا ممكن خاص
Veo que las arrancado sin ningún problema , esa máquina lleva un sensor de seguridad de arranque abajo , por lo que veo igual lo lleva anulado , veo que las arrancado con el volante torcido ,,,
Hola, veo que no llevas acondicionador de rodillos , tranquilo ya le cogerás la marcha , yo le daría 4 vueltas al rededor y luego me pondría al lado más largo y recto posible , con el volante hay que ser menos brusco , pero vamos con tiempo ya verás como la manejas , disfrútala es una joya de máquina , saludos ,,,
Hola , ese motor gasta medio litro de aceite cada 12 horas de trabajo , es normal hasta de nueva gastaba ,,
Hola , que recuerdos me da esa máquina , mi padre compro una en el año 80 nueva , y yo la conducía con 10 años , es una máquina para grandes explotaciones , y tu la tienes nueva , y recuerdo cada tornillo de cada parte de la máquina , se le hizo unas 25.000 horas de trabajo en 12 años , saludos desde SPAIN
ممكن خاص
Перевод на український
كم سعرها
ممكن خاص
سلام عليكم
what grade of oil , filter and hydraulic fluid goes into that tractor . I have one that i just got and it needs a change out not sure I want to pay the higher price for the new holland oil if i can get the same quality for less . I just dont have the manual. Thanks
hey when i did it i got my oil from wal mart and i think the filter i got there to. i dont remember the oil number but i know i put in a synthetic one
@@smalltimefarming8550Thanks for your reply
ممكن خاص
مرحبا
ممكن خاص
Yes it's very critical to get it all lined up or it doesn't like to tie I've noticed I finally sold this one and I got a Freeman Baylor I'll do a tutorial on that eventually here
we have the same baler. i will say the needle adjustment is CRUCIAL to proper knotter operation
What'd you pay for it? I have a 2280 that is feild ready that I'm going to put on tractorhouse here soon, 2300 hours on mine whats yours have?
I think I spent around $800 for mine and I would have to look at the hours I don't know how many hours it has but when I got it it was not running and I had to put new tires on it and I also repainted it so now it's a pretty good machine
It has 1628 hours right now
ممكن خاص
If you treat this like a 135hp fwa tractor you will like it, if you think it's a big 4wd you're going to be disappointed
I wouldn't mind owning a tractor like this someday
this one is up on facebook market place for sale right now
@@smalltimefarming8550 where are you at
@@zimmhollowfarm8414 over in WA State
@@smalltimefarming8550 o little far i am in pa
Please keep making videos on this tractor.
i will try to get more soon
@@smalltimefarming8550 ok thanks
Good job 👍 dose the pto work?
yes the PTO works all the things work on the tractor except for the headlights I got to get new ones replaced on it eventually