Пікірлер

• 
  @ronijoy214 күн бұрын

  I laughed at your comment about signing off at a certain stage bc you’d probably start swearing 😆 I can totally relate Thanks for the tips

• 
  @enlightenedact16 күн бұрын

  Thank you so much! I thought I had to buy a totally new door…

• 
  @dannys262727 күн бұрын

  If you add this text ( prime line part B713 installation) to the video tile, i guarantee you it will hit hundreds of view soon 😊

• 
  @nazerbor3iАй бұрын

  I wish you showed us a better angle

• 
  @eduardomelendez87842 ай бұрын

  My roller gets stuck and can't push it into the groved ts.. any suggestions.. it gets stuck before the grove.

• 
  @AdrianDunevein2 ай бұрын

  Contact me on my website www.fixingscreens.com and send me some pics I will be glad to offer whatever help I can

• 
  @dizkoteck2 ай бұрын

  Is this universal?

• 
  @AdrianDunevein2 ай бұрын

  Many mitered screen doors use press fit corners that are 1.125" x 0.406", the roller I show here fits the corner that I sell on my website www.fixingscreens.com. I use these rollers and corners to replace broken worn out corners that look different but have the same overall dimensions. These rollers are corners fit maybe 90% of mitered style screen doors.

• 
  @jjj-yyz3 ай бұрын

  Short and to the point! Much appreciated for your efforts to share. 👊

• 
  @f1_fan48510 ай бұрын

  Awesome, many vid out there just show how to install it none how to remove it

• 
  @AdrianDunevein10 ай бұрын

  Many thanks!

• 
  @paularicci3193 Жыл бұрын

  Painful

• 
  @yazminaguilar2734 Жыл бұрын

  What size nut and bolts we got one that didn’t have those

• 
  @joseluismacias38782 жыл бұрын

  Muchas gracias su explicacion me ayudo mucho y pude repara mi puerta, un abraso y un saludo.

• 
  @AdrianDunevein2 жыл бұрын

  Thank You!

• 
  @nedamaurica5352 жыл бұрын

  Do you like beer? 🍺 This is song for you! And don't forget to drink a beer when are you listenig, ...GIVE ME ANOTHER BEER sounds better (i'm your new subscriber, subscribe my band Pikapolonica / Ladybug) and 🍻 Cheers 🍻 kzread.info/dash/bejne/hXaV0sael7nSd7Q.html

• 
  @moby0072 жыл бұрын

  Thank you!! Saved me from buying a new lock by mentioning the adjustment screw (mine was hidden behind a tape)

• 
  @fixingscreens70752 жыл бұрын

  Thats great !

• 
  @gnanegnanendran27052 жыл бұрын

  Thanks Adrian, I have the similar set of roller and corners to be replaced. Whre can I get from, price?? Please let me know.

• 
  @AdrianDunevein2 жыл бұрын

  www.fixingscreens.com/patio-screen-door-roller.html

• 
  @MikeCompSciGeek2 жыл бұрын

  Whoa, thank you for mentioning the adjustment screw. I didn’t need replace the mortise lock, just needed to adjust the screw.

• 
  @dougsimpsonmusic3 жыл бұрын

  Thank you...Just saved me $300.00

• 
  @AdrianDunevein3 жыл бұрын

  Awesome - Happy to help !

• 
  @probstjt3 жыл бұрын

  Thank you so much for making this video. A local repair shop couldn't fix my screen door. Now i can. Thank you

• 
  @ocanaug4 жыл бұрын

  exactly what i was looking for. thank you. and yes a camera man and clean lens would help.

• 
  @DARKWARRIOR-lm8lx5 жыл бұрын

  Great explanation of all the working parts. great video

• 
  @DARKWARRIOR-lm8lx5 жыл бұрын

  looks like a well made screen door what is the brand name of this product?

• 
  @AdrianDunevein5 жыл бұрын

  Screenco is the biggest manaufacturer of these doors right now but this extrusion has been used by many manufacturers over the years

• 
  @alanwilson2165 жыл бұрын

  Do you have a video on how to remove one of these B513 roller assemblies from the frame? I have 4 of them to remove and they do not want to come out at all, all screws are removed and door frame is disassembled.

• 
  @danwilliams69475 жыл бұрын

  Thanks for the video. May I suggest a cameraman next time so you can use both hands and show us how you got the corner out and the roller in? How can you replace just one corner?

• 
  @gargoyl33094 жыл бұрын

  I agree plus he needs to clean his camera. I was wiping my screen thinking it was me. 😂😂

• 
  @RobertaMorris16 жыл бұрын

  Thank you for your assistance. After watching your video, I was able to purchase the correct lock and replace the broken one on my sliding door all by myself.....YAY. Thanks again.

• 
  @danlambert94066 жыл бұрын

  My mortise lock is inside of the handle and it is smaller then what can be found at local hardware store or big box store. What would I do now?

• 
  @AdrianDunevein6 жыл бұрын

  Hi Dan , theres an email address at the bottom of my home page at www.fixingscreens.com. Send me some pics and I will try to offer whatever help I can

• 
  @connormacleod25726 жыл бұрын

  So you've replaced a super common roller and corner with a very uncommon one. Why would you want to do that? You even said it is very common. You can easily replace the plastic wheel with a metal ball bearing wheel without removing the mesh or corners. Sounds like 10 times more work than what was required.

• 
  @AdrianDunevein6 жыл бұрын

  You are right, in some cases you can replace a nylon roller with a steel ball bearing roller but those housings have cheap wire springs that often fall apart while you are trying to install them. Or worse fall apart shortly after you have put the door back in. Very often doors will have broken corners as well as missing or broken rollers. Better to overhaul the whole door with all new parts and have it working properly for years afterward.

• 
  @connormacleod25726 жыл бұрын

  I've worked on hundreds of these doors with these corners. The only time I've seen them broken is when they use a plastic corner. I'll agree, the springs aren't the greatest, but much easier to replace than the whole corner. 9 times out of 10, the top rollers don't even make a difference at all.

• 
  @hannakinn6 жыл бұрын

  Is this Bruce from El Centro?

• 
  @risajajr6 жыл бұрын

  Isn't there a final step that you omitted -- attaching the plastic decorative latch cover? That is the part I am stuck on.

• 
  @aaadraftingservices35246 жыл бұрын

  If your latch plate is different from my door kit would be glad to help, just email some pictures, the email address is on the bottom of the home page at www.fixingscreens.com

• 
  @buttdrunk6 жыл бұрын

  Thank you for this video! All directions were clear and I managed to change the lock in under 1 hour.

• 
  @AdrianDunevein6 жыл бұрын

  Thanks, glad to help !

• 
  @tellthetruth46107 жыл бұрын

  Best screen video ever!

• 
  @AdrianDunevein7 жыл бұрын

  Thanks!

• 
  @bonniegkirk8 жыл бұрын

  Agree with Nicole's comment about slowing it down. I read extremely fast but could not keep up. Didn't even have time to hit the pause button, and had to back up. Thanks for the tips, though!

• 
  @rubber2002110 жыл бұрын

  Much too fast..deep breath, relax and explain what and how.

• 
  @fat_head_Carl11 жыл бұрын

  do you have a video where you cut a hole in the door itself for the tab and the latch?

• 
  @mnj.lutazame310511 жыл бұрын

  what kind of software you use it?

• 
  @AdrianDunevein11 жыл бұрын

  If the corner is still in one piece, I usually hammer it out with a rubber mallet. If its broken, and a piece is stuck inside the frame, I use an awl to poke and hook onto part of the corner inside the frame then slowly lever it out. If the pice refuses to come out easily you can also drive it further into the frame to make room for a new corner. Gonna have to make a new broken MRSA corners video !

• 
  @duanedean647011 жыл бұрын

  No more drawings? I would like to see it finished. Very informative and down to earth. Thanks.

• 
  @igorribeiroaraujo11 жыл бұрын

  thx , very helpful

• 
  @goofyfam4211 жыл бұрын

  Don't ignore this video just because the sound quality isn't that great... I struggled for over an hour after watching the high quality video on this topic..This video clip saved my from having to go buy a new screen door. Where he puts the screwdriver..in front of the wheel.. allows you to get enough leverage to open the thing up and get it over the post. It was the step I needed to get the part to go back in my screen door.

• 
  @rx386411 жыл бұрын

  i have the same roller, how do i install them?

• 
  @nicoleemenhiser209012 жыл бұрын

  This video had some great tips I never thought of. Thanks for the post! (I would say slow down on the speed a little bit, though. I had to do a little speed-reading haha)

• 
  @OnEbayNow12 жыл бұрын

  Just what I was looking for. Thanks!

• 
  @dojufitz12 жыл бұрын

  thanks i have an old edwardian home - it has a mortice lock - it works fine but i wish to put a push plate on the door and i can't seem to remove the handles from the door...i've unscrewed the little screw that is in the handle and remove the cover of he lock ect.....whats the trick with removing the door handle as i'm stumped!

• 
  @AdrianDunevein13 жыл бұрын

  Thats possible, but many locks can be removed through the mortised hole in the frame. Try grabbing the extended latch hook with a pair of locking pliers before you remove the screws and rotating the whole lock slowly forward to see if it will tip out through the mortise. The locking pliers will stop the lock falling and give you time to fiddle with it to get it out.

• 
  @1kzrider13 жыл бұрын

  Thanks I have to replace mine. I just do not know how to remove the lock it appears you have to remove the whole door because if I remove the two screws it only drops to bottom of door.

• 
  @sportzgallore413 жыл бұрын

  What software did you use for this? Great video

• 
  @mamareas14 жыл бұрын

  saw your picture in the Toronto Sun! can't wait for summer, catch you on the beach!!