Пікірлер

• 
  @user-pc9qb7vn8g12 сағат бұрын

  Looks nice but why tf is there a carbon hood on a slow family car ??

• 
  @gapperformance58 минут бұрын

  It’s a $60 wrap haha. And it’s because my wife loves it and it protects the hood from getting pelted by Minnesota salt and road construction debris

• 
  @BenotzJoe21 сағат бұрын

  Ball Joint not actually removed.

• 
  @gapperformance19 сағат бұрын

  There is no actual ball joint if you really think about it, since we’re all being so smart

• 
  @ForemanJF123 сағат бұрын

  Dude, thanks! Thought Safelite guy was incompetent after changing my windshield out... But I see he just had swapped them. Same issue here, going to fix now, thanks!

• 
  @gapperformance21 сағат бұрын

  Glad I could help! Please help back with the sub!

• 
  @a36saulito14Күн бұрын

  Definitely doing this to my N after seeing this video!!

• 
  @gapperformanceКүн бұрын

  I think it’s worth it, makes you wonder why they didn’t do it from the factory

• 
  @mobbinReelDeep3 күн бұрын

  I'm fairly certain this is the issue im having with my car. If i kept driving for a week or so and just skip 3/4 am i going to hurt it more?

• 
  @gapperformance3 күн бұрын

  If you have to you have to, if you have another vehicle I’d mitigate any further damage

• 
  @adrianrawlings30323 күн бұрын

  Mines a 64 diesel, goes in reverse then pops out , or makes bad grinding sound then jumps out but not every time

• 
  @gapperformance3 күн бұрын

  A 64 diesel what? I’m sure it’s an entirely different issue

• 
  @lucasjones25163 күн бұрын

  Can I get window decal from you please

• 
  @gapperformance3 күн бұрын

  What kind?

• 
  @michaelrich74665 күн бұрын

  That's actually enough room to reach the drain plug?

• 
  @gapperformance5 күн бұрын

  Yessir, I’m 5 foot 8 and fat and had no issue getting to the filter or drain plug. I put a paper towel roll under my head so my neck doesn’t hurt too haha

• 
  @delasmoo5 күн бұрын

  Have you rotated your tires yet? If yes, what ft lbs do you torque your lug nuts to?

• 
  @gapperformance2 күн бұрын

  I’m a nice guy but googling something that easy for you seems unethical to be fair

• 
  @josemorales53415 күн бұрын

  Hey man doing the same swap at the moment. Without the sound synposer system in the regular ST motors. What did you do to the vacuum recirc that comes from the BOV?

• 
  @gapperformance2 күн бұрын

  So I’m not sure I understand exactly what you’re referring to. 1. I did remove the sound symposer entirely and capped it at the firewall 2. I ran true boost reference from the intake manifold and routed it to the bov and used a defeat plug to trick the computer into thinking it was still plugged in. I never liked how aftermarket bov worked with the electronic control. I don’t remember having recirc just vent to atmosphere

• 
  @ethanlau2796 күн бұрын

  Good to know. Going to purchase a set for my 2024. thanks for the content.

• 
  @gapperformance2 күн бұрын

  Thanks for the friendly comment! Please subscribe to help us back :)

• 
  @askmeagainlater59577 күн бұрын

  Did you buy a new shifter mechanism cause you wanted a new one or did this fix only work temporarily till it broke? Ive got a 2014 still have yet to look at it

• 
  @gapperformance7 күн бұрын

  I did because it wasn’t too expensive and I figured if it was worn out from previous abuse, I would rather go in there to fix everything once. You could definitely epoxy the piece back on for cheap, but if you can find a shifter mechanism for cheap it’s not that hard and definitely worth doing

• 
  @askmeagainlater59577 күн бұрын

  @@gapperformance okay cool man I appreciate the response this helps alot!

• 
  @classicmusicvideosrestored8 күн бұрын

  Thanks so much! I just bought a used Acadia and freaked out when all the chimes started up with Stabilitrack and traction control. $20 at O'Reillys and about 10 minutes later, no chimes. Most appreciated!

• 
  @gapperformance8 күн бұрын

  These stories warm my heart. Thank you for taking the time to comment and please help us back with the subscribe! Have a great weekend!

• 
  @delasmoo8 күн бұрын

  What kind of ramps are those? Also, did you have to take off the splash shield underneath or left it on?

• 
  @gapperformance8 күн бұрын

  Nope left the splash shield on, I posted a short with them on my channel with the link in the description. $38 on Amazon

• 
  @feliciaspage213510 күн бұрын

  this video made doing this so easy thank you. I got this done in under 1.5 hours with the video

• 
  @gapperformance10 күн бұрын

  Glad I could help you! Please help me back with the subscribe! :)

• 
  @daniellelewis495911 күн бұрын

  Does this work for a 2017???

• 
  @asharsheikh564311 күн бұрын

  Your one of the few that did this properly, thank you for following the torque specifications. Great car btw!!

• 
  @gapperformance11 күн бұрын

  Thank you! I tried to make it short and sweet and warranty friendly

• 
  @columbiariverdetailing194311 күн бұрын

  Hmm is there another seal inside? I replaced mine and it's still leaking

• 
  @gapperformance11 күн бұрын

  Where is it leaking from? There is another video on my channel showing the input shaft seal was the culprit

• 
  @columbiariverdetailing194311 күн бұрын

  ​@@gapperformanceleaking out the new seal the drivers side

• 
  @gapperformance11 күн бұрын

  @@columbiariverdetailing1943 could be, but mine was dripping between the motor and trans and running down the seal, or it might not have seated properly on reinstallation

• 
  @columbiariverdetailing194310 күн бұрын

  How gentle did you have to tap the new seal in?​@@gapperformance

• 
  @gapperformance10 күн бұрын

  @columbiariverdetailing1943 not too gently. I just made sure to use a rubber mallet and to take my time, but that said it only going in so far. I noted what the old ones looked like. If you use a regular hammer you’ll just mess up the new bearing

• 
  @xOGKuSh15 күн бұрын

  Why are you not using the amsoil filter?

• 
  @gapperformance14 күн бұрын

  Easy answer - one extra layer of arguing on a warranty and the stock filters are great and $7 a filter is cheap :)

• 
  @xOGKuSh14 күн бұрын

  @gapperformance Didn't think about your vehicle still being under warranty, that actually makes perfect sense.

• 
  @gapperformance14 күн бұрын

  @xOGKuSh I know it’s weird for me too haha. Luckily amsoil covers almost every factory oil spec in existence. Filters, crush washers, and torque specs are good to keep for evidence of they ever argue on warranty stuff

• 
  @tsnaha18 күн бұрын

  Never had a problem with madness bought a ton of parts from them

• 
  @Silversky54518 күн бұрын

  I’m having this issue, but it’s also caused my AC to go out… I can’t get that cable to stretch over to a new fuse, also nothing seems to be blown either. Any ideas?

• 
  @gapperformance18 күн бұрын

  If fuses are good I’d be chasing grounds next which isn’t easy. Typically if I get too far down the rabbit hole I spend the money having a shop do electrical work instead of spending two weeks chasing it haha

• 
  @Joemels21 күн бұрын

  Hey just to clarify, the ez tap is reverse threaded so you use hand tools to back that in counter clockwise. Then do you keep going counter clockwise to back out the spark plug threads? Then you said you used those needle nose pliers to pull it out once you’ve got it completely out of the threads and free.

• 
  @gapperformance21 күн бұрын

  That sounds correct by my reading. It’s a pain but if you go slow and take your time it’s actually surprisingly easy

• 
  @Joemels19 күн бұрын

  @@gapperformance I actually got it out with a screwdriver! Thanks though this woulda been last ditch effort

• 
  @freddypedraza206622 күн бұрын

  Dealership probably used a power drill

• 
  @gapperformance21 күн бұрын

  Wouldn’t even surprise me. I quit letting dealers do anything, even oil changes lol

• 
  @opadilla12323 күн бұрын

  Looking at the car from the front tight side strut always hots the computer lifts the hood very slightly i just used one works perfect i also have the front brace so only vould use 1

• 
  @gapperformance23 күн бұрын

  Strange mine doesn’t touch anything - I even put a paper towel down with some grease on it and nothing touched. Honestly one strut is probably enough to hold it up true.

• 
  @OmarHermosilloJimenez23 күн бұрын

  Are those spacers for the wheel bearings and axles throw aways or did you put them back on? Or do they come with new axles?

• 
  @gapperformance23 күн бұрын

  I pulled the axle to replace the transmission and put all the old stuff back together. Ran it for another 20k miles without an issue. They may come with new axles but ask the parts shop

• 
  @OmarHermosilloJimenez22 күн бұрын

  ​@@gapperformanceI ask because I just did the wheel hub with bearings and did not put the spacer back in since the rubber coated side was tore up. Haven't had an issue

• 
  @davidbensira166523 күн бұрын

  Thanks

• 
  @EN_autoblog26 күн бұрын

  Cleeeean....

• 
  @guskammueller831329 күн бұрын

  "So wear gloves with this" 👌

• 
  @gapperformance29 күн бұрын

  Haha yes moral of the story is owwwww

• 
  @SkinarmobonemechАй бұрын

  You the man. Thanks for explaining this!

• 
  @gapperformanceАй бұрын

  Glad I could help, please help me back with the subscribe :) thanks!

• 
  @KlausLowkeyАй бұрын

  gotta rip those stickers off the N badges on the seats '

• 
  @gapperformanceАй бұрын

  But then they’ll get dirty

• 
  @riv.k1302Ай бұрын

  Very sexy on god no diddy chefs kiss perfection 👨🏾‍🍳 👌🏾

• 
  @paohueyinxiong7842Ай бұрын

  Your install video was certainly helpful! Did you have JST tune your S280? If so, how much did you make? Both on stock fuel system and if you upgraded. Thanks!

• 
  @gapperformanceАй бұрын

  I did have JST, never made it to the dyno but you’ll laugh uncontrollably every time you floor it. I’ve since switched to Tuneplus. Thanks for the nice comment and please help us back with the sub!

• 
  @KaxEditАй бұрын

  Do the cubes show on n mode?

• 
  @gapperformanceАй бұрын

  Let me try tomorrow, I don’t think so though

• 
  @matthewr.33Ай бұрын

  Sexy, would look better in my colour though

• 
  @salmeron4989Ай бұрын

  Was your steering wheel hard when you turn asking becuase I have traction control ABS nd brake light on ?

• 
  @gapperformanceАй бұрын

  Honestly the car was freaking out so bad on the highway I was more worried about it stalling - can’t remember if the steering was heavy. Sorry!

• 
  @juanortiz7692Ай бұрын

  Nice I also live in MN and want to get one too

• 
  @gapperformanceАй бұрын

  10/10 recommend. Absolute joy to drive, but I’m at 550 miles, 50 more and I can send it and I’ll start throwing more content up. Subscribe and catch the new stuff! If you get one hit me up and join our MN local group

• 
  @TheEvilCookie01Ай бұрын

  ​@@gapperformancerandom question but which phone holder did you end up getting?

• 
  @gapperformanceАй бұрын

  @TheEvilCookie01 a.co/d/06ghlYNU

• 
  @TheEvilCookie01Ай бұрын

  ​@@gapperformancethanks! Hopefully getting my N next month, appreciate the video

• 
  @gapperformanceАй бұрын

  Awesome glad to hear it! Drop me the sub so I can figure it out all the solutions ahead of time for you. And so you can let me know what cool stuff you figure out with it

• 
  @joshleroux5076Ай бұрын

  Did nobody notice the spider

• 
  @gapperformanceАй бұрын

  Haha actually a few have. I’ve been letting them bite me for years but still no six pack

• 
  @meeswolsingАй бұрын

  That car looks goofy in the back

• 
  @gapperformanceАй бұрын

  Never stopped me from a good time

• 
  @ShaunBNTSАй бұрын

  Disagree

• 
  @swiftrevenge1878Ай бұрын

  I think it looks sick as hell especially when the lights are on

• 
  @riv.k1302Ай бұрын

  You look goofy in the front

• 
  @ryeguy88Ай бұрын

  It’s a lot of work. Most other cars you just hit the button to change the LED color.

• 
  @gapperformanceАй бұрын

  True! My fiesta ST is just one button. I don’t mind since once I find a color I like I tend to leave it that way.

• 
  @ryeguy88Ай бұрын

  @@gapperformance Ha! I havea FiST as well which is why I'm like... but why so complicated? ha

• 
  @djscottymaxxАй бұрын

  Another video said it was the steering wheel position sensor so what is it really like this is bs every vid I watch these guys are telling a different story

• 
  @gapperformanceАй бұрын

  If you read the comments you’ll see that it helped a ton of people and some people had a truly bad transmission. To me it’s worth $20 here and there to try some sensors on the cheap. If they don’t solve the problem then you eat the big ticket and know you tried. Multiple sensors play into this system so it’s likely they are all accurate and no one is scamming you lol

• 
  @eagleeye5719Ай бұрын

  You saved the day dude !! Thanks 😅

• 
  @klarque420Ай бұрын

  FYI those splined bolts holding the strut to the knuckle are suppose to be replaced with service bolts Source: am ford engineer

• 
  @gapperformanceАй бұрын

  Haha sounds like a parts guy if I’ve ever heard one. Never replaced them on any of my cars and 200k miles without an issue. If you’re a ford engineer I’m Batman.

• 
  @akillizzАй бұрын

  Just here to inform that this video saved my ass, thank you!

• 
  @gapperformanceАй бұрын

  Glad I could help, please subscribe to support us back!

• 
  @akillizzАй бұрын

  @@gapperformance wil do!

• 
  @JamesMcgarry-ds9nkАй бұрын

  Does the car need to be in neutral or park while pulling out the driver side axle? Or does it not matter?

• 
  @gapperformanceАй бұрын

  I always leave the transmission in neutral but no it shouldn’t matter. With this I’m pretty sure it was in park

• 
  @pablo156v6Ай бұрын

  great video. I have to change spark plugs on a 1.6 1994 impreza of one friend. the coil are the same or it changes ???

• 
  @gapperformanceАй бұрын

  Do you mean the coil for each cylinder? Or is the coil the same for your Impreza? Idk if they’re the same from car to car

• 
  @pablo156v6Ай бұрын

  ​@@gapperformance hey thanks for reply. Its my friends car, 1993 impreza 1.6 ej16s engine. it has More than one year not turning on, i was woking all day today but we havent finished. I think is the fuel pump or one aftermarket alarm it has. It has coils on top of air intake, cables and spark plugs with much more free space to work.

• 
  @handmouthАй бұрын

  Great info! Thanks.

• 
  @gapperformanceАй бұрын

  Glad I could help, please help us back with the sub!

• 
  @kylegolladay3868Ай бұрын

  Do you have to get an alignment done after you remove it this way?

• 
  @gapperformanceАй бұрын

  I did not get an alignment and had no issues. You’re not changing the length of anything if you’re using an oem replacement. If the tie rod or other suspension pieces also need to be replaced, it might be a good idea to

• 
  @ashveersanilal16992 ай бұрын

  Howsit , will this work on a 2016 ford fiesta 1.0 T ecoboost engine. I wanna install this on my catless downpipe.

• 
  @gapperformance2 ай бұрын

  It’s a universal approach, but as for the specific fit - I’m not sure if it will work. Probably, but it’s built for the fietsa ST specifically

• 
  @AdamJakoubek2 ай бұрын

  This totally just helped me. Thanos for posting this!

• 
  @gapperformance2 ай бұрын

  Glad I could help, I was shocked it was something so easy lol. Thanks for watching and please subscribe to support us :)

• 
  @westtexas5012 ай бұрын

  how much for the turbo ?

• 
  @gapperformance2 ай бұрын

  Haha sold it a long time ago