Пікірлер

• 
  @dariush_Shams3 күн бұрын

  Dear teacher, honestly, I have a Mercedes-Benz Shooting Brake 250 CDI. The headlights are broken due to an accident and I want to replace them myself, but I don't know where the base of the lower lights should be installed. Please help me.

• 
  @dariush_Shams3 күн бұрын

  Hello dear professor, I watched your video, it is very informative. Do you have any other videos about half radiators or fan coolers? Also, the installation of Mercedes-Benz shooting brake headlights

• 
  @dariush_Shams3 күн бұрын

  👏🏻👏🏻👏🏻👏🏻

• 
  @safohajjar10156 күн бұрын

  Helo brother can i know the screen andriod size 7inch or 9inch thanks

• 
  @GFI6 күн бұрын

  Hi. It's 9".

• 
  @Matzer20910 күн бұрын

  Hello! Do you know how this engine is called? It is a Pavesi engine, but which exact type is it?

• 
  @GFI9 күн бұрын

  Hi. As far as I know it's just called Pavesi 125CC Lamellar.

• 
  @Matzer2099 күн бұрын

  @@GFI Thank you very much!

• 
  @mariograndinetti11 күн бұрын

  I have a GS1200 its a 2007 model with ABs, I brought wired wheels, but the distance across the discs is too wide as measure 130, whereas the cast wheels measures 125... do you know why are there differences between the years? frustrating as cannot make the callipers sit wider

• 
  @GFI11 күн бұрын

  What model year are the wheels? There are differences for sure. Also the ABS ring can be different.

• 
  @mariograndinetti10 күн бұрын

  @@GFI they said were 2007-2009. I will need to check to see if they have a part number printed.

• 
  @xzoxАй бұрын

  why do you people go through all this bollocks, I just can't believe the shit connected with owning a BMW . Get yourself a car you can actually drive.

• 
  @mtecnologia2Ай бұрын

  Hello Sergio, First time here I bought 2007 the same color for my 40 birthday, so how can I request for you the spacer please?

• 
  @GFIАй бұрын

  Send me and email

• 
  @practicaltesla3259Ай бұрын

  Great video! How about model Y? 7:01 how to get to those 4 important bolts for camber adjustment but on model Y?? Would be highly helpful. Thank you in advance.

• 
  @GFIАй бұрын

  Hi. Not sure but I believe the procedure should be similar.

• 
  @astraman19702 ай бұрын

  Just bought a led unit for my 2006 GS, how could I get hold of one of those spacers as don’t have a 3d printer?

• 
  @GFI2 ай бұрын

  Hi. Please send me an email.

• 
  @DavionDavis-bb6op2 ай бұрын

  All injectores lic

• 
  @KyndOgriv2 ай бұрын

  I used tbe same brand of diagnostic tool topdon.. However i cannot fint the health report. We have the same problem witj reception. But icNt find the real problem. Broken wirez or whatever.

• 
  @GFI2 ай бұрын

  Check the rear hinge. The problem is in that area for sure.

• 
  @cristianemanuel18002 ай бұрын

  Hi man just wondering if it’s the same procedure on CLS320 v6 cdi from 2008 ( facelift model ) ? 🙏

• 
  @GFI2 ай бұрын

  I am not 100% sure, but it should be equal or really similar.

• 
  @TheCraizyGamer2 ай бұрын

  I know that this video is 2 years old , but i have the same problem with poor radio reception . I saw that you welded another wire in the outer layer - I suppose that it's the ground ? And where did you connect it ? To other ground or somewhere to body ? Thank you for response :) Cheers !

• 
  @GFI2 ай бұрын

  If I remember correctly I just weld it in one side and on the other because the original wire was totally broken.

• 
  @adihendler8452 ай бұрын

  Hello, the link to the Resistor Kit is no longer valid. Can you please send the information (seller, item name or new link) for the kit? Thank you!

• 
  @GFI2 ай бұрын

  The one I bought is not available anymore, and I cannot find the company name. Sorry.

• 
  @jezjeyasingham50252 ай бұрын

  Thank you, very informative Excellent mod

• 
  @GFI2 ай бұрын

  Thanks for you message. Do not forget to subscribe :)

• 
  @wbathrick2 ай бұрын

  Do you connect up the antenna ground wire to the Black vehicle ground wire ?

• 
  @GFI2 ай бұрын

  It was some time ago. In the video I show and explain all the connections in detail. Nothing was done off camera.

• 
  @wbathrick2 ай бұрын

  How did you get the internal panel of the tailgate off ?

• 
  @GFI2 ай бұрын

  If I remember correctly you have to push it out. It has a bunch of metal springs.

• 
  @davidcarqueijeiro32373 ай бұрын

  Boas. Tu es portugues? Eu tenho uma mota dessas. Sera que me podes ajudar com ela. Obrigado

• 
  @GFI3 ай бұрын

  Boas. Sim sou Português. Se souber ajudar. Qual é a questão?

• 
  @davidcarqueijeiro32372 ай бұрын

  @@GFI conhece o modelo igual a essa DT mas da Peugeot x125 . Sabe me dizer onde posso fazer a elétrica toda essa mota.? Onde comprar.

• 
  @GFI2 ай бұрын

  @@davidcarqueijeiro3237 fazer uma instalação nova, qualquer electricista auto deve conseguir fazer (especialmente se tiver a velha). Se estiver atento no facebook marketplace, por vezes aparecem vendedores a vender motas dessas às peças, pode ser que consiga encontrar uma instalação usada.

• 
  @zoltarzoltar23263 ай бұрын

  Replacing the battery is simple and easy, but do you have to code it?

• 
  @supinac173 ай бұрын

  Hello, may I ask ? I have on my tesla model 3 one front wheel tilted about 4mm in comparison the other side. Can it be adjusted by from the top of the suspension ?

• 
  @GFI3 ай бұрын

  By what I saw, 4mm it is maybe too much to be adjusted. But it is an easy procedure so maybe it worth try.

• 
  @supinac173 ай бұрын

  @@GFI but in general : When wheel is tilted (moved towards the back) then Can it be corrected from the top of the suspension as you did on your video ?

• 
  @GFI3 ай бұрын

  The top of the suspension is attached to a bracket that can be adjusted in and out. Can’t remember it you can move it back and forward. Sorry 😅

• 
  @henri76593 ай бұрын

  Hello, thank you for your superb video! Would it be possible to have the small 3D printed part to make the adjustment? Thanks in advance!

• 
  @GFI3 ай бұрын

  Hi Henri. Send me an email please.

• 
  @ubaldocaamano37993 ай бұрын

  Nice video, how much does B9 maintenancecost? mercedes oil is over 90€, but could I use Castrol Edge 5w30 instead?, And one more: I´m looking for the shooting brake 4 matic (so much rain in Galicia-Spain), What is the extra cost in this case? Thanks in advance.

• 
  @GFI3 ай бұрын

  Hi. This one in total was about €400 in parts. You can use the Castrol Edge with Mercedes approval. Not sure how much it will be more for the 4 matic but considering the oil change in the front diff it cannot be that expensive.

• 
  @fabricegueroux87383 ай бұрын

  Thank you!

• 
  @josefcomartinezhernandez55223 ай бұрын

  Con cuantos km hizo ese mentenimiento?

• 
  @GFI3 ай бұрын

  The computer asked B9 around 200k

• 
  @user-en5lg1om4y3 ай бұрын

  Hi bro,i m Ali 64 yrs old,fm malaysia. Can u help me to get th wire to connect led taillight,convertion. And how much is th price.

• 
  @GFI3 ай бұрын

  Hi Ali. I found that on eBay, but now I cannot find the seller anymore.

• 
  @user-en5lg1om4y3 ай бұрын

  @@GFI salam bro,ok thank,is that is th case,i got to duplicate th dighrmp.try to layout by my self.

• 
  @wbathrick3 ай бұрын

  I have a 2008 with a PCM2.0. Does your instructions work with my configuration?

• 
  @GFI3 ай бұрын

  It should be the same wiring. Have a look in your wires. It’s simple to pull the unit out.

• 
  @randominternetuser28883 ай бұрын

  If not the PCCM+ classic system is available for your 955 and should be compatible.

• 
  @28valley3 ай бұрын

  Seems that the resistor should be 50 Watt 6 Ohm

• 
  @GFI3 ай бұрын

  Thanks for the info.

• 
  @otc31323 ай бұрын

  Nice video, can I ask you how to disassemble the interior of back door.?

• 
  @GFI3 ай бұрын

  Hi. Just like I show in the video. You have a bunch of springs to pull.

• 
  @OZ-fj1ep3 ай бұрын

  Hello, Thanks you for video, I need reference for rear breaks Bosch

• 
  @GFI3 ай бұрын

  To be accurate it’s necessary to insert you car year and engine. I recommend you to check for example AUTODOC website, select your car and check the reference you need.

• 
  @starobinful3 ай бұрын

  Hi where are you located?

• 
  @GFI3 ай бұрын

  Hi. Portugal.

• 
  @aubreyballesteros40314 ай бұрын

  Hm

• 
  @pascaltrojman8464 ай бұрын

  Great Video, very informative. Thank you!

• 
  @GFI4 ай бұрын

  Thanks for your message. You have done more videos for the CLS in the channel.

• 
  @AndreiChifan4 ай бұрын

  Loved your video, man!

• 
  @GFI4 ай бұрын

  Thanks.

• 
  @ricardofernandes68994 ай бұрын

  Boas, pelo vídeo. Só uma questão qual o aperto final de torque nos injectores??? Obrigado

• 
  @GFI4 ай бұрын

  Bom dia. O torque dos parafusos de fixação dos injetores é 26Nm para o motor N47.

• 
  4 ай бұрын

  Sabe me dizer qual o torque do bujão do óleo pra fazer o aperto

• 
  @GFI4 ай бұрын

  Bom dia. Depende do tamanho do bujão. Deixo os torques por tamanho. M12: 25Nm M18: 35Nm M22: 60Nm

• 
  @Mz.rmdb9575 ай бұрын

  Do I have to put the red one from the yellow thing in reverse-in?

• 
  @GFI5 ай бұрын

  It will depend how you want to feed the camera. Following my connection it work.

• 
  @Mz.rmdb9575 ай бұрын

  I have no wire with camera b+. Is all the names different for each brand?

• 
  @yalcinarik5 ай бұрын

  Thanks for the video, it is really informative and encouraging. Is this jump starting tool really necessary when there is an auxiliary battery installed to car?

• 
  @GFI5 ай бұрын

  Thanks for your message. If you have the jumper it won’t hurt to connect it 😁

• 
  @willitheunissen43465 ай бұрын

  Leider kein Deutsch

• 
  @Nintendo8bit6 ай бұрын

  It's nice to see other people repairing the 928 👍😀 I hope the 928 community on KZread will grow in the future. As of now the 928 is an underrated car.

• 
  @GFI6 ай бұрын

  Thanks for your message. The next one on the 929 will refresh the intake system, fuel system and spark. Do not forget to subscribe 😁

• 
  @siffa51256 ай бұрын

  Hi, dude. This is very good resolution. I have same problem with light. Do you have above the picture from print on the sale ? Thank you ...

• 
  @GFI6 ай бұрын

  Hi. Send me an email [email protected]

• 
  @sacs20006 ай бұрын

  Your video inspired me to make the change I had now added the LED Blinkers and the main light and I love it, it looks great and I will enjoy it on my rides

• 
  @GFI6 ай бұрын

  Great to get your message. That is my main goal, to inspire people to Go For It. Thanks for your message. Enjoy and ride safe.

• 
  @petermcculloch21186 ай бұрын

  Great video

• 
  @GFI6 ай бұрын

  Thanks

• 
  @imranhussain557 ай бұрын

  i have the same unit, i have sound from radio but if i turn off the car and restart it no sound plays, any idea whats wrong.

• 
  @GFI7 ай бұрын

  That is really strange. What do you have to do to have sound again?

• 
  @stephenrichards8227 ай бұрын

  As standard there is a plain washer and a spring washer under the head of each terminal bolt.

• 
  @GFI7 ай бұрын

  It’s possible.

• 
  @lufcwls7 ай бұрын

  I went for a '4 wheel alignment' and the garage did not take out any of the frunk so I'm worried that it's not been done properly... My results sheet has no measurements for the caster too. Should I be worried?

• 
  @GFI7 ай бұрын

  Maybe your car was straight and they didn’t feel the need to touch the camber or the caster.

• 
  @abochavez3 ай бұрын

  at my work they will half ass the alignment so beware. and they’ll just break off the corners of the bottom panel to adjust the rear toe. i’ve expressed my feelings about that but management does not care. they just want a quick 100$

• 
  @HeftigHeffalump7 ай бұрын

  Hi. Great video, thank you! Do you know the system code for changing certain settings? I need to change the video format, and Xtrons won’t answer me with a code… thank you!

• 
  @GFI7 ай бұрын

  Did you checked the manual that came with the radio?

• 
  @petermcculloch21186 ай бұрын

  Code 8888 is often the generic one for Chinese head units. It is worth a try.@@GFI

• 
  @sonyantony82037 ай бұрын

  Your video helped me a lot. Thank You very much.

• 
  @GFI7 ай бұрын

  Thanks for you message. Do not forget to subscribe

• 
  @taheral-mamari53467 ай бұрын

  I've bought a used 2016 CLS with 160,000km and a 7G tronic gear box. I am not sureif the previous owner has ever changed the transmission fluid or not. My questions: *Do you recommend changing transmission fluid now? *If yes, what will be the safest way to do thatin order to avoid any negative impact?

• 
  @GFI7 ай бұрын

  Hi. Mine requested the B9 with around 200k km. If it is shifting smooth I would stick to the recommendation of the car and keep doing the maintenance as requested. In other hand, if you feel more comfortable to change all the fluids and start fresh in your ownership, just change it. It’s not that hard as you can see in my video.

• 
  @TomGlander7 ай бұрын

  Excellent, thank you for the video.