Пікірлер

• 
  @williamramsay1Күн бұрын

  I wouldn't go for the recall. Still running great after all these years!

• 
  @keegan4498 күн бұрын

  You just saved me. Thank you.

• 
  @Denise-tl2su13 күн бұрын

  Can you write in detail which cable on the car you plugged into which cable on the rafio?

• 
  @IsraelSocial20 күн бұрын

  Thanks for the video, it help me a lot

• 
  @abdelhassand25 күн бұрын

  Outstanding content!

• 
  @tv-qg7um28 күн бұрын

  Fantastic video I have the same problem I this is the only video with a lot a detail I have a question do you submerge the board completely on the solution or just half way please let me know thank you great video 👍👍👍👍

• 
  @gearswitch569228 күн бұрын

  I submerged it entirely in the glass pyrex for about 30 mins before brushing off the corrosion and being sure to let the "dirty/corroded" IPA drip off so that it didn't evaporate leaving the deposits in place

• 
  @tv-qg7um28 күн бұрын

  @@gearswitch5692 thank you

• 
  @AngelalovescutecatsАй бұрын

  Nice one, might be worth getting a car cover there.

• 
  @LoveLikeaHurricaneАй бұрын

  does the floor board lay flat if your full size wheel is there? i know you removed it in your video, just asking in regards to the situation where you need to use your compact spare, and then put the flat full size wheel in the trunk

• 
  @gearswitch5692Ай бұрын

  I no longer own an 86 twin, but I don’t think the trunk liner would lay flat with a full size wheel in the spare well if I remember correctly.

• 
  @carlosarturovillarrealrodr6582Ай бұрын

  Too late! 😂

• 
  @spitfireaaceАй бұрын

  Sweet looking car.

• 
  @spitfireaaceАй бұрын

  Polish up the headlight lenses with a scratch remover liquid.

• 
  @gearswitch5692Ай бұрын

  That is def on my list of items to get to. I'm taking care of mechanicals first, but I will find the time eventually

• 
  @danb3766Ай бұрын

  The boot is very nice. I don’t understand why the video doesn’t show removing the old one and installing the new one.

• 
  @gearswitch5692Ай бұрын

  Sure thing, let me elaborate: I removed the shift boot assembly (plastic insert with the OEM boot attached) from the center console. I dropped the assembly off, along with my new shift knob at a local independent upholstery shop and explained what I wanted crafted. They removed the old boot and glued a newly sewn genuine Texas leather one into place on the same plastic insert. It pops right into place, same as the old one comes out, not much to show there. The purpose of this video is to show that often times quality products are not found on Amazon, eBay or from chains. They can be manufactured in struggling downtown shops for a great price and good conversation. I’m not selling any products or advertising any merch either, just trying to change hearts and minds!

• 
  @Simba-qi4gkАй бұрын

  Good luck 😊

• 
  @gearswitch5692Ай бұрын

  Thanks, I’ll be needing all the luck on this one

• 
  @nickclark38832 ай бұрын

  I got the same struts too!

• 
  @gearswitch56922 ай бұрын

  Two years later and I still really enjoy them on everyday roads!

• 
  @dgxxtreme2 ай бұрын

  Automaitc is better.

• 
  @AllThatHypeАй бұрын

  “Manual is too hard to concentrate on while driving 🤓☝️”

• 
  @twrcrew88522 ай бұрын

  From new, these were just as rubbery. I get in a lot of them and a lot of them feel exactly the same to shift as they did when new. Just as I remember them.

• 
  @gearswitch56922 ай бұрын

  Thanks for that insight!

• 
  @thomasroux35122 ай бұрын

  Great man, thank you, you saved me on this one

• 
  @whiteunclerukus2 ай бұрын

  Just did this today, may actually buy some shielding for the hoses a bit later though

• 
  @gryphon1234563 ай бұрын

  Sorry you had such a rough time. Most I know are into the ownership for 100k+ with no issues but you can’t discount there are a few lemons out there as with all cars and manufacturers. Still loving mine. Best handling car under a Porsche for sure.

• 
  @gearswitch56923 ай бұрын

  I agree with you 100% on it being such a great handling platform. Glad you are having better luck with yours! My experience was enough to keep me away from the Subaru brand for good. If Toyota manufactured the engine on the next redesign I would be making a down payment.

• 
  @gryphon1234563 ай бұрын

  @@gearswitch5692 I’ve heard rumours that may become the case. 🤞🏻

• 
  @sununtaschnittker64693 ай бұрын

  Great video! Thank you for taking the time to make it!

• 
  @protectivecoatings18463 ай бұрын

  This is in a replacement video. It’s you selling a boot.

• 
  @sparkles4purple3 ай бұрын

  Thanks

• 
  @Crewze664 ай бұрын

  Thanks. Very helpful.

• 
  @neilchirico4 ай бұрын

  You saved me from destroying the seat harness connector. It wasn't readily apparent to this knucklehead.

• 
  @gshafer4 ай бұрын

  Both of these bushings had fallen out and were siting underneath the roof. Do you have a picture of how these should look when installed?

• 
  @gearswitch56924 ай бұрын

  Hey, that is my mistake for not including a finished product shot in the video. Do you want me to post one of what it should look like fully installed or were you able to figure it out?

• 
  @gshafer4 ай бұрын

  @@gearswitch5692 That would be great if you could put up a pic. I have not yet tried to install them.

• 
  @gearswitch56924 ай бұрын

  Hope this helps: kzread.info/dash/bejne/fZuIu6yPnZyvdpc.htmlsi=m6e2BHci7Dmt4w7T

• 
  @kennethstevens57115 ай бұрын

  The best way to level them is to take the passenger side cable from the motor and use a drill to turn the cable and eyeball the level until they are equal.

• 
  @ben8jam5 ай бұрын

  Please can you explain how you got the cover off? I have the same seat as you, and I want to pull out the foam, but I can't figure out how to get the cover off. It feels like it is glued down around all the edges - and there is literally no information online on how it's done. You have the closest video, but you're missing the most important part. :(

• 
  @gearswitch56925 ай бұрын

  Hey Ben, the seat cushion I had replaced it with was the same color and in better condition. I just swapped out cushion after removing the seat. I did not reupholster the cushion. have re-upholstered the driver side bolster surround on this car and several other seat bottoms on different cars. Usually the cover is held to the cushion using "hog rings." These can be cut off with wire cutter pliers and replaced with zip-ties. Take a look, go slow, and don't give up!

• 
  @man-up40865 ай бұрын

  Thank you. I was wondering how people change this without being able to pull it back like front wipers. Removing that cap is helpful. Ty

• 
  @drago76356 ай бұрын

  My car comes with this but the armrest is bent and needs replacement, to remove just the arm rest do i need to remove the tracks as well? Or how can i remove it?

• 
  @helmhurst6 ай бұрын

  Excellent video cheers

• 
  @mrporsche42366 ай бұрын

  I have a black brz ts. When you remove the torque dip with the uel catted header and a tune suddenly this car is one of the most fun cars you can drive ever. Ive owned porsches bmws mercs audis you name it and ive driven virtually everything. Brz is more fun then 99% of them

• 
  @IttNeverTooLateToRace-qz2gn7 ай бұрын

  Great video, really helpful, thanks. One question for you: The metal "spike" type tool you used to help finalize the lineup of the alignment bolt holes on getting the toe and camber control arms back in place, what is the name of that tool and where can I get one?

• 
  @gearswitch56927 ай бұрын

  Hey, great question! I just purchased a couple more this black friday and had trouble coming up with the exact name to search. This is what I ordered: Mayhew Tools 40100 9" Rolling Head Pry Bar and Mayhew 40101 16-Inch Rolling Head Pry Bar. They are quality tools to have for the collection and are made in the USA. I just used them when rebuilding the rear suspension on my Civic and they are very convenient to have. Hope that helps!

• 
  @itcomesback7 ай бұрын

  thanks!

• 
  @justjessy01157 ай бұрын

  I just bought a cx 5 (2020) i noticed the settings would start changing, or radio would change different channels (u could see the screen changing like someone was moving the knob) in assuming it's some sort of electrical problem? I asked the Toyota dealership & they said it needs a software update from Mazda (ever heard of this)? I'm so confused what's wrong with it.

• 
  @gearswitch56927 ай бұрын

  Hmm, it may be possible that Mazda has to do a firmware update to the infotainment system. I wouldn't think there would be a charge for that, but I would call your dealer ahead of time to ask. Some companies push out updates "over the air" but from what I've read the 2020 likely has to be updated from a usb thumb drive.

• 
  @scotttones7 ай бұрын

  Very helpful thank you

• 
  @jeffjeff44777 ай бұрын

  Great Video I'm waiting on my driver's upper leather Will be doing this maneuver Very helpful Was thinking that I had to remove seat Anyways Thank You

• 
  @xAgyex8 ай бұрын

  How long did this battery last after you refilled it?

• 
  @gearswitch56927 ай бұрын

  If I recall maybe another 6months to a year at most. The original battery lasted roughly 7 years

• 
  @maebusgaming79139 ай бұрын

  How does that explain the noise if the AC compressor is on and when it is off. We replaced everything and the noise is coming from a metal fuel line that runs underneath the cold air intake.

• 
  @burakoshimazaki9 ай бұрын

  Did you ever use a lightweight pulley set or crankshaft pulley by any chance?

• 
  @gearswitch56929 ай бұрын

  I have not. Lots of info on the ft86club forum though. Best of luck!

• 
  @averagegisu587710 ай бұрын

  Do you think i could replace the leather with something non leather?

• 
  @gearswitch569210 ай бұрын

  You should be able too, but I would make sure it will hold up well to the wear and tear it will see on ingress/egress

• 
  @Wowwow-wl3kx11 ай бұрын

  my boxter has hissing sound while driving. recently water pump replaced. it made air coolant leakage. is it related ? how do I fix the issue?

• 
  @joe-serioushoward6201 Жыл бұрын

  Great video. I have changed mine before, probably 5 years ago but wanted a refresher. Thank you 👍👍

• 
  @sinclairal Жыл бұрын

  Awesome

• 
  @cmiovino Жыл бұрын

  This is more logical than how I was doing it. I did two stack on top of each other through the passenger side door, third one mostly upright sitting against the other two, final one in the trunk by itself.

• 
  @amandalinder6210 Жыл бұрын

  My car makes this noise coming from the pulley area, but none of the pulleys have any play?

• 
  @Random_cleans Жыл бұрын

  How do you remove the claim shell if one side doesn't lift?

• 
  @Random_cleans Жыл бұрын

  Was anything broken or did it just come out of line for some reason? Mine was working fine yesterday but after heavy rainfall last night it was all wonky while trying to have the top down today.

• 
  @MichaelBrown-ho5wc Жыл бұрын

  I do appreciate the attempt, but you skip over the actual procedure for recovering the bottom cushion. I think you should let people know before they begin that the bottom seat is a full on advanced automotive upholstery procedure. This way, they can make the decision of they want to attempt this on their own or take it to a shop. I think a lot of people would remove their seats, get this torn apart then not be able to do this and have a real mess on their hands.

• 
  @gearswitch5692 Жыл бұрын

  Hi Michael, I can add a disclaimer in description in hopes to help others avoid your frustrations. Thanks for the feedback. I don't make a cent off my videos. My intent is to help out others and I am sorry if that wasn't the case for you in this instance

• 
  @MichaelBrown-ho5wc Жыл бұрын

  @@gearswitch5692 thanks for that response. I’m actually a professional installer I was seeing if anyone had made videos on recovering Porsche seats with these horrible Lseats and ran across yours. I just felt that people might get very upset and frustrated if they tear their seats apart and didn’t have the proper skills or equipment to do the job.

• 
  @jungness Жыл бұрын

  So how does the plastic knob feel vs aluminum?

• 
  @gearswitch5692 Жыл бұрын

  The OEM plastic knob felt cheap which is why I was looking to upgrade. The aluminum IXI shift knob feels very solid and looks great. I park with a sunshade in and the top up, so I haven't had issues with it being too hot in the summer either

• 
  @laptech3767 Жыл бұрын

  I got a new free replacement from Mazda turns out Panasonic made bad batteries

• 
  @thetechlibrarian9 ай бұрын

  What did they replace it with

• 
  @laptech37679 ай бұрын

  @@thetechlibrarian brand new Mazda battery

• 
  @chandlermc17267 ай бұрын

  Hello fellow Philadelphian!