Hi i'm Deano, Married to my wife with kids and grandkids so they tend to keep me busy.
I tend to do a bit of DIY so while i'm not tied up at work for a bit of relaxation i like to go in the garage and make bits and bobs for friends and family, I'm no expert by any means but over the years i have tended to turn my hand to most things.
I started this channel more as a hobby but also to give myself and the family a chance to look back over the years at bits n bobs i've done and made, My only wish is id started it 20 years ago having moved house a couple of times i could have documented fitting kitchens, bathrooms, wardrobes and general development of the properties we've moved to and from as well as all the things done in the kids houses.
Hope you enjoy the channel and keep coming back for more.
Пікірлер
I’m getting an E-03 error message. Guess I need a new glow plug, but unit is new, was working yesterday, then spat the dummy…
Yeah you possibly do ....the E03 error does relate to the glow plug
Awesome Information Brother Deano..Learning all the time with ya my Brother..Love your contend dude Oiii Oiiii....
Nice one Gaz
Wow deanos,what a cracking informative video you have posted, learning more every one I watch ,keep them coming pal .....
Glad you enjoyed it
Diesel is 2/3rds the cost of kerosene here in the States.
Amazing the difference in cost depending where you're located. Thanks for watching.
Cheers fella. I’ve got the Kreg 720 which has a lot of similar features. To be fair the wings which support wide boards look a lot more useful on your one, on the Kreg they’re a bit flimsy.
I did look at the Kreg but with it being plastic it put me off a bit... Whether it makes any difference I don't know .... I imagine the Kreg is more than capable because they seem to be very popular. Thanks for watching.
Hi Deano , Looks a decent that pocket hole jig, good demonstration easy to set up and well explained. Great video catch you soon take care
Cheers Shaun
I've moved into a flat with gaps in the trunking behind the toilet. Never had so many spiders to deal with in a bathroom 😭
Deano Braavaaaaa...Must have missed this upload??? Nice stuff Brother, I,m Learning all the time from you brother ...Looks like you put some graft in to this Gazzzeeebo Geezzaaaa..Thanks for the tips n tricks bro..Oiiiii Oiiii...One man Army...
Thank you for sharing. I'll put some 1 liter marks on mine immediately - that trick of yours will make it easy to know how much fuel there's left!
Thanks for watching.....
Hi Dean, A nice refurb of one of your planters the wood is in good condition being out side for 4 years. you done a good job repainted a new top with a pocket and biscuit joints it will last more years, Great video Take care
Cheers Shaun
Awesome stuff as Usual Brother Deano..I didn,t even know what Pocket and Biscuit joins were..I do Now..Learning loads from ya Braavaaaa...
Every days a school day
Nice colors you used on the planter. Gives me some ideas
Thanks for watching, glad it's been helpful.
Great video. Can I ask your thoughts regarding the temu squares. Are they any good. Cheers.
Thanks for watching, yes I've been really happy with the Temu squares. Initially I only brought two but was happy enough with them I decided to buy more. I have done a couple of video where I mentioned them if you care to watch it. kzread.info/dash/bejne/lIp_2patYaebn5c.htmlsi=lyZFVef0uQcXX1ma kzread.info/dash/bejne/hoR31MuwoLPSgco.htmlsi=rBn1qHp_XBAuMa4j One other thing if you haven't ordered off temu before.... dont always believe the picture you are looking at..... it can show you 4 squares when in reality you are buying two... So always read the description. And also remember they come in different sizes so pick the size you want.
Hi Dean I agree it’s great to leave things behind for a short time and regain your thoughts for me it’s a release for the what Sue is going through with her cancer. Also like you I didn’t start out hoping for big numbers but it does get a bit addictive lol 😂 good vid I prefer vids like yours as talking to people ads a connection the music ones drive me nuts looking forward to seeing more
Thanks for the comments Phil, like I say it's a bit of escapism and if at the end of the day I've produced something then it's all good. Lifes hard at times as we both know and it's good to put your mind elsewhere .....even if it is for just a short while.
We all need an escape from the toils of life ,love the planter it's given me an idea for outside the front door
Glad its been of help
Hi Dean, I know what you mean, we got to escape from reality at times and give our mind a rest, this is why I go down to the workshop even for half hour and may do nothing in there it's just to gather some thoughts and go back with a fresh piece of mind and for me it usually works. Over 300 subscribers that's great, good job on your tall planter nice paint finish they will look great in your garden. Great video Take care
Thanks for the kind words Shaun
Good stuff, just got myself a pocket hole Jig with extraction and very pleasantly surprised with how little dust there is anywhere.
Glad you liked it..... pocket holes are frowned upon by some but I feel it has its place.
@@dodgydino62 If they were good enough for Norm Abram they’re good enough for me 👌🏻
Looks the part that does kidda, keep up the good work, enjoy watching them ..
More to come no doubt ....
Nice Tidy Job that Brother Deano...Love your videos mate keep em coming braavaaaaaa....
Cheers Wildman
@@dodgydino62 Oiiii Oiiiiii....
You have done a good job there and looks great. Great video take care
Cheers Shaun
Looks fab!
Thanks Gem
great investment those clamps, nice video.
For the money they are great
You always busy and on the go, keep em coming dodge Dino, waiting for part two
Always something to be done 😊
Solar Powered Beer storage..Or cooler...Bet you could pull it off Bravvaaa...Just a thought...Love your work brother Deano..Respect from the WILDARMY...🤣😉
Now there's a thought..............
This is going to be a good looking planter, can't wait to see it finished, Great video
Thanks for that Shaun and thanks for watching
Love your garden Brother Deano...Massive respect my brother Keep the knowledge coming dude..Oiiii Oiiiii....
Much appreciated
As usual impeccable work simple and effective very nice
Cheers Phil
Yet another awesome watch,from this man of many talents, keep up the good work pal....
Nice one Mr Sims
Awesome stuff as always Brother Deano..The WILDARMY Commends you...🤣Love these vids dude keep em coming..Oii Oiii.
Cheers Gaz...Appreciated.
Nice Plant boxes, great video👍
Cheers Shaun
That better be coming to my house!
I've used it a couple of times and it does the job. For a fiver it's worth it as far as im concerned.
Great vid Deano. I'd be interested to see how you get on with the feather board. I've been looking at getting a similar one for my table saw
Hi, you are absolutely right about the dust extractor, its terrible. Did your friend share the files online? Would you know where to find them? Thanks!
Hiya....it wasn't a friend of mine that printed the file it was someone on KZread that mentioned it. If I can find the video again I'll let you know but it was some guy talking about this specific planer.
Awesome reviews brother Deano, always keep the missus Happy 😂I,m with you on that one....Great stuff as usual keep em rolling braavaaaaa......😉
Happy wife....Happy life 😊
Good informative vlog again Dean, keep up the good work,also remember the sponsors😢
😊
Do you know how to change the altitude in meters setting ?
I'm not sure you can actually change the setting. I've always thought it shows YOUR current altitude and can't be altered..... maybe I'm wrong and someone else knows more.
That looks Ace....😊
You need a vattery back up as if u get a power cut the heater will burn out as it cant cool down properly.
Hiya Paul, I do know about the implications of running without a battery backup but i suppose its a chance you take. All i can say is for me personally i only run it for short periods when im in my shed and ill be honest i cant remember the last time we ever had a power cut so chances are very slim. For the cost of the parts for these type of units even if i fried the motherboard i reckon i could get it back up running for less than 30 quid so like i say its a chance i take. Thanks for watching and thanks for the reply.
I need that as a ringtone too..😂
😂
Deano Braavaaaa...Love watching you work buddy, its quite theraputic and relaxing, Awesome ideas brother, those will sell like Hot cakes dude..Love it..
Thanks Gaz, appreciated. Cant see me making any to sell it took me too long. I'd have to sell them for £300 to make a living 😂
@@dodgydino62 🤣They are smart though mate..Great stuff...Respect bravaaa...
I'll have one please 😊 xx
Works a treat pal ,as you say these contractor saws will never be completely dust free
Thanks for watching.....And thanks for the support.
Deano, is that the dust extraction pvc pipe I see coming out of the back of the saw with a 90 degree bend? May I ask how effective it is in removing the dust?
Yes it is the dust extraction....it works quite well when cutting boards that completely cover the insert plate but when just trimming bits off then I get a lot of dust mainly because I havent got extraction on the blade guard. When cutting 45s I have to disable it but I am looking to get some flexible hose so I don't have to disable it and also add a T piece to connect the blade cover.....then it should be a lot better.
Even "This Old House" will talk you through the process. You just wasted my time.
How much did this video cost you? Chill out. If you can't follow a simple video, maybe you shouldn't have any tools.
I'm not really sure what needed explaining that was shown in the video..... I thought it was pretty much explanatory. Sorry to waste your time
Awesome Tips and Great content Brother Deano...You are a wealth of Knowlege my friend..Big Up Braavaaaa....
Thanks Gaz
Good watch again dean,could try removable leg to add support,what you think master...
Yeah could be worth it if pushing heavy boards through
Good idea that pal
Thanks
Very nice set up. I wouldn't heat wrap the exhaust tube. I'd make a cage out of expanded metal to prevent people and things from touching it but still allow it to radiate all that otherwise wasted heat
Yes someone else has mentioned that....it is something I'm looking at.....just waiting to get my hands on some hopefully free mesh 😊
This is so helpful, I’ve been looking for a toilet that doesn’t exist that would fit the boxing I already had 🤦🏼♀️😂
Glad it was of help to you