Пікірлер

• 
  @chriscafaldo250227 күн бұрын

  Rip it up ..

• 
  @chriscafaldo250227 күн бұрын

  Glad to see you out on the Turf

• 
  @JakabDavidNogradiАй бұрын

  Do you know if the metal used for the turnbuckle has been improved as I know lots of people broke that?

• 
  @knowair6767Ай бұрын

  I don't know if Redcat changed the metal of the turnbuckles. I know they did revise the plastic ends at some point along the way. I actually am using 1/8 scale turnbuckles in place of the upper arms the Kaiju came with. I have pivot balls and standard rod ends on my Kaiju inner and outer.

• 
  @JakabDavidNogradiАй бұрын

  @@knowair6767 from redact originally or from a different company, can you link it?

• 
  @JakabDavidNogradiАй бұрын

  Do you know if they improved the turnbuckle or not?

• 
  @chriscafaldo25024 ай бұрын

  Where are you..??? Looking forward to seeing your Reckless Abandonment with you vehicles 😊

• 
  @miltbuiltrcMBRC5 ай бұрын

  More shorts please milt built loves your channel.👍😊

• 
  @MysticRiverRC5 ай бұрын

  Nice bit of snow bashing! Cheers!

• 
  @knowair67675 ай бұрын

  Thanks! 🍻

• 
  @miltbuiltrcMBRC5 ай бұрын

  That was a hard bash good job👍

• 
  @knowair67675 ай бұрын

  Thanks!! It definitely had more battery left, but darkness was setting in and I really wanted to get a video of the Xmaxx on paddle tires. So cut the Kraton run short. In hindsight, I really wish I had the GoPro when I ran the paddle equipped Xmaxx in the sunlight, really looked awesome when you can see the roost and ice chunks flying through the air!! The paddles belong to my brother, so I took them off the Xmaxx that night. I think I do want a set of 8s paddles, and a ton of other parts/upgrades, LOL. Thanks again bro! Happy bashing!🍻

• 
  @NoahAmazon5 ай бұрын

  Hi, is this as big as a Arrma Kraton 6s? Is it a good truck?

• 
  @knowair67675 ай бұрын

  Hey there, yeah, it's pretty close to the Kraton 6s in size. It's a bit narrower in width than a Kraton. Redcat uses positive offset wheels to make the truck wider. Traxxas does this also. As far as good, yes, I think it's a great truck. Redcat doesn't get aftermarket support like Arrma or Traxxas though, so if you're looking to upgrade and make it do some of the crazy jumps and stunts that are commonly seen here on YT, you may be better off with a Kraton or Sledge. What you see me doing in my videos I have been using the Kaiju for over 3 years and it's held up very well. Sure I've replaced many parts but they are relatively cheap to buy. For the money, it's a pretty good buy. The Kraton 6s v5 BLX at $550 is a great choice as well. You can still find them around, Arrma is about to drop the V6 version and is showing the V5 as discontinued I believe. Don't let that deter you from buying a V5 tho, I doubt there will be a whole lot of differences.

• 
  @NoahAmazon5 ай бұрын

  @@knowair6767 Thank you for the details and I appreciate the info and help. Yeah I just purchased the Redcat Kaiju EXT, I got a really good buy, for it. I got 2 sets of battery’s, and a charger all for the same price of a Kraton 6s, so value that’s why I went with the Redcat Kaiju EXT. I am not using it for jumping just park use going around markers on concrete and grass. I think it’s definitely the most under rated truck out there. It looks great and it has hobbywing parts, it’s big and fast, it’s all I wanted in a RC truck. Thank you again and great video 😊👍

• 
  @knowair67675 ай бұрын

  @@NoahAmazon Awesome!! Congrats! Yeah, I forgot to even mention the Redcat branded HW electronics. My esc is still going after 3 years of use, snow, rain, mud, summer heat.. crazy how good it really is. The servo is a bit weak but it's the only rtr servo I've ever had that lasted more than a year. I think mine lasted almost 2 years. I was so impressed by the Hexfly servo I started buying them for every one of my rc's. They are rebranded DS servos. You can get the 35kg(blue) as an upgrade for $20 off amazon. You may want to consider upgrading from the t-plug connectors if they're still on the truck and batteries. I'd recommend either XT90 or EC5. The t-plugs will eventually overheat and deform if you run the truck hard. Enjoy brother!!👍😎🍻

• 
  @chriscafaldo25025 ай бұрын

  You got yourself some Battle wounds on the Old Meat Mittens .. No different then working on the Sion ..😂😂

• 
  @knowair67675 ай бұрын

  Yeah, the old skin ain't what it used to be apparently. LOL. And yes, I was working on the toaster yesterday, o2 sensor and some rear brake adjustments. Don't think it was working on the car that got me this time though, dogs and rc's..🤣

• 
  @chriscafaldo25025 ай бұрын

  I watch for the wrecks ... Breaking stuff equals views .. 😂

• 
  @chriscafaldo25025 ай бұрын

  That's called the Mc Mike Twizzel

• 
  @chriscafaldo25025 ай бұрын

  Sweet.. Saturday morning with a Double Shot of mayhem

• 
  @chriscafaldo25025 ай бұрын

  Was looking forward to seeing a new video. Appreciate MikeX

• 
  @knowair67675 ай бұрын

  Thanks Crip! I wish I had more options, like terrain, editing, ect.. Maybe if my bro comes out of his cave we can do some demo derby, I mean racing on ice! That would be different, LOL. Cheers bro!🍻😎

• 
  @10izamar5 ай бұрын

  Woow i loved!!! I hava a traxxas slash 4x4 with the same body, I love driving it with 3s 80c 20T Pinion, but I'm having problems with the differentials... I'm going to think about buying one like this 😍 Don't you have any problems with your Tekno using 3s? Anything you need to reinforce or any tips?

• 
  @knowair67675 ай бұрын

  Thanks! The SCT410.3 has been solid for me. Only breakage thus far has been the A block, which is the front suspension plate. The SCT410.3 comes with plastic A, B, C, D blocks. I put an aluminum replacement on and no problems since. It is a crazy durable truck for sure. I have run 4s a handful of times in it, no problems. If I were going to run 4s regularly as some do, I would upgrade the plastic diff cross pins to steel, but otherwise these are known to handle 4s without problems.

• 
  @10izamar5 ай бұрын

  @@knowair6767 wooow incredible, I'm going to have to change my traxxas slash 4x4 for a truck like yours. Also I can't find durable cvjoints, they all break or the pins come off very quickly. I find myself frustrated by that. I wish the tekno cvjoint would fit traxxas slash. but no way.

• 
  @knowair67675 ай бұрын

  @@10izamarI hear ya. The TRX ultimate, or whatever they call the steel cvd's are just ridiculously priced, and apparently not that strong either.. What are you running for motor and esc? I have a Hoss 3s VXL that I grew tired of replacing the plastic driveshafts on. I put the Tekno cvds on the rear, still stock up front. The fronts don't break as often as the rears on the Hoss for me. What I don't care for with the Tekno upgrades is the 6mm stub axle means the hub uses a thin walled bearing. The bearings don't last very long compared to the stock TRX setup, however, the Tekno cvds and stub axles have been awesome for me. Haven't broken one yet. Pins are still looking very good too. FWIW, Tekno advises NOT to use their cvd's with RPM arms. Too flexible. I have to say though, if you feel you've "outgrown" the Slash, the Tekno SCT410 is well worth it's price tag. Save your TRX electronics to make the Tekno build more affordable, upgrade later if/when needed.

• 
  @jagergerg97715 ай бұрын

  You should definitely get the indestructible Russian body, it’s totally worth it

• 
  @knowair67675 ай бұрын

  Thanks! I have checked them out before. There was a bit of a hiccup in availability for a while after the war started. This stock body is over 2 years old now, definitely past it's prime LOL. What you can't see is that I added bracing front to rear to "triangulate the body cage. It works awesome. Before doing that, the body would fly off constantly since the back half is missing.. I think I'm going to buy another stocker first and see how it holds up with the cage mod. But first, I must get every penny's worth out of the body I have!! LOL.. I call it sharkbit!!😂

• 
  @chriscafaldo25026 ай бұрын

  That's a tuff little machine

• 
  @BargainBashersRc6 ай бұрын

  Looks like a great bash in the snow!

• 
  @knowair67676 ай бұрын

  Thanks! I sometimes wish winter lasted longer, LOL.

• 
  @BargainBashersRc6 ай бұрын

  @@knowair6767 I understand that to an extent… the cost of heating where I live is too expensive though

• 
  @knowair67676 ай бұрын

  @@BargainBashersRc I hear that!! Heating with Pro-pain here!! Did the pellet stove for a few years, cheaper but more work, cold floors and outer rooms.. joined a fuel co-op, cut the pro-pain bill almost in half.

• 
  @BargainBashersRc6 ай бұрын

  @@knowair6767 I live in a condo, all electric and the rates are high here

• 
  @knowair67676 ай бұрын

  @@BargainBashersRc oof! Sounds expensive. You can get a pretty good "lay of the land" in my vids. At the top of the hill. Wind blows pretty good, especially in winter. Electric heat would break me for sure..

• 
  @JoshLudden-bq6db6 ай бұрын

  I think i recognize that xmaxx!

• 
  @knowair67676 ай бұрын

  Ain't she a beaut Clark?! 😜

• 
  @JoshLudden-bq6db6 ай бұрын

  Are you new to this? Just wondering, I found your site by mistake!

• 
  @knowair67676 ай бұрын

  @@JoshLudden-bq6db New to YT or RC? YT I guess you could say, more like ill equipped honestly, LOL. Not new to RC'S though.

• 
  @JoshLudden-bq6db6 ай бұрын

  Are you on the arrma forum?

• 
  @knowair67676 ай бұрын

  Yeah buddy! It's me.. and all my misfit rc's 🤠

• 
  @SleekHobbies886 ай бұрын

  Definitely awesome truck .

• 
  @chriscafaldo25026 ай бұрын

  The plow truck running down the road in the Background is perfect..

• 
  @chriscafaldo25026 ай бұрын

  Love the in play commentary

• 
  @chriscafaldo25026 ай бұрын

  That one almost landed in your lap

• 
  @chriscafaldo25026 ай бұрын

  Awesome.. love the night ride

• 
  @chriscafaldo25026 ай бұрын

  That Driveway is about as clean as the North way ..

• 
  @knowair67676 ай бұрын

  Cleaner, no salt!!😉🤣

• 
  @miltbuiltrcMBRC6 ай бұрын

  Nice power in the x Also good Air assault🤙

• 
  @knowair67676 ай бұрын

  Thanks bro! It could definitely use some better tires for the snow..The Arrma 8s BF's are awesome "all rounders" but, for the snow I would like a chunkier tire. Pickings are slim for affordable alternatives since the Duratrax options have been discontinued. I can't afford the Proline or Jconcepts offerings. Well, I guess I could but, can't want to, LOL. I'm hoping for at least one good snowfall before the season ends. I really would like to make a "mega" ramp from snow and just go full bore up the driveway and "send it" like the big air guys at least once, LOL.

• 
  @miltbuiltrcMBRC6 ай бұрын

  It's gonna happen no doubt​@@knowair6767

• 
  @miltbuiltrcMBRC6 ай бұрын

  Red cat's best. I have an 6 s shredder Was looking at the machete good Thrash of the Redcat kaiju subbed

• 
  @knowair67676 ай бұрын

  Thanks brother! Yeah, the Kaiju is a fun truck for sure. I think what I love the most is that it was "cheap" to buy, therefore I don't have very high expectations. Or concerns if I break it, LOL. But honestly, it has been so reliable. I have thrashed it in mud, water, snow..still on the original ESC! I swapped the motor for a 4074, but only to get a little more low end power over the stock 4068. The original motor never gave me any problems. The 4074 was a $40 Surpass from Amazon. The Kaiju still represents one of the best bang for the buck 6s rigs on the market I feel. Happy bashing Bro!!

• 
  @chriscafaldo25026 ай бұрын

  Beach weather Brother

• 
  @knowair67676 ай бұрын

  Hellyeah Crip!! Was gonna open up the swimming pool but weatherman says it's gonna rain later this week.. bummer. Hey, how's those ice skates I sent ya for Xmas working out?😎🍻

• 
  @chriscafaldo2502 Жыл бұрын

  Max eating the Tree Donut

• 
  @chriscafaldo2502 Жыл бұрын

  Full Send ....MINT..

• 
  @BeautyBeastRC Жыл бұрын

  awesome track!

• 
  @knowair6767 Жыл бұрын

  Thanks!! It's small and simple but the trees sure add some spice!! LOL One day, it'll get an expansion!! Now you know why I run stock power.. just don't have the space for any big block action. Fine by me, keeps costs in check..😛👍

• 
  @chriscafaldo2502 Жыл бұрын

  Like seeing All the Air ... sweet little Track Dude

• 
  @chriscafaldo2502 Жыл бұрын

  Nice rip... STUMP GRINDER 😂😂

• 
  @chriscafaldo2502 Жыл бұрын

  Sweet

• 
  @chriscafaldo2502 Жыл бұрын

  Tree climbing Truck 😂😂😂

• 
  @chriscafaldo2502 Жыл бұрын

  Same platform and different shell?? Or different one..

• 
  @knowair6767 Жыл бұрын

  It's made by swapping the chassis and center driveline between different Arrma 6s models.. topped off with a body from another company, Redcat. It's a Shredder body.. basically all the Arrma 6s rigs are built with common parts that are interchangeable between models. Get tired of it, turn it into something else..👍🍻😁

• 
  @chriscafaldo2502 Жыл бұрын

  @@knowair6767 I played Syringe over some of the video... Lol... Kinda matches up occasionally.. I'll try and put some thrash cuts together and send them to you.. or you can probably down load some.... plus add some slow Mo Over the jumps ..

• 
  @knowair6767 Жыл бұрын

  @@chriscafaldo2502 I have nothing to edit the HD video with.. have two windows 10 laptops, but they won't even play it in HD much less edit..LOL.

• 
  @chriscafaldo2502 Жыл бұрын

  Mount a go pro on that thing...

• 
  @knowair6767 Жыл бұрын

  I'm afraid of breaking it,LOL. One day perhaps.. need an outer cover for it first.

• 
  @chriscafaldo2502 Жыл бұрын

  Mint

• 
  @chriscafaldo2502 Жыл бұрын

  Sweet Cali's off the big drift..

• 
  @chriscafaldo2502 Жыл бұрын

  Sweet

• 
  @BeautyBeastRC Жыл бұрын

  haha 20$ sypoms! Those beyond bargin bin lipo!! 🤣 great bash bro.

• 
  @knowair6767 Жыл бұрын

  Yeah, get what we pay for though. The Sypoms are okay for low powered stuff but the 4092 in this thing definitely needs more.. It's hitting LVC after 5 minutes!! Then I put them on charger to storage charge, and they're over storage voltage already? Weird.. not sure what's up with that, perhaps they're just sagging too much voltage? Oh well, one of these days I'll get me some of those SMC's y'all been raving bout!!😉🤜💪

• 
  @RCRoads Жыл бұрын

  Great bash session with the Recat. It's a beast for sure. Awesome control over the jumps. some day I'll get better at jumping. I cant believe how well it held up in the cold especially the tree strike. Thanks so much for sharing. 👍👍

• 
  @knowair6767 Жыл бұрын

  Thanks for watchin and the sub!! I'm new to the video stuff myself but been into rc's since the 80's on and off.. The kaiju is a gem for the money. Just so much fun. A bit of a handful on 6s, I run it mostly on 4s myself. Happy bashing bro!!👍

• 
  @RCRoads Жыл бұрын

  @@knowair6767 Your welcome. You have an awesome channel. 👍👍

• 
  @miltbuiltrcMBRC Жыл бұрын

  Awesome video Subs are coming milt built approved

• 
  @knowair6767 Жыл бұрын

  Thanks bud👍 I hope to have some form of editing capability in the near future. Thanks for the sub too👌😎

• 
  @maxkent29 Жыл бұрын

  Love it!!!! Real backyard bashing Uncut.

• 
  @maxkent29 Жыл бұрын

  That truck stock ?

• 
  @knowair6767 Жыл бұрын

  No man, it's got a Tesla plaid motor in it, runniin 1000 volts!!😎😜🤘

• 
  @maxkent29 Жыл бұрын

  I know you’re the real deal. Not sponsored by any company. Showing realistic jumps n bashes . This is real rc folks !!

• 
  @peighday Жыл бұрын

  I agree stock servo seems a lot better on 7.4v. Like you said may go out but like having my fans run at 7.4v as well.

• 
  @peighday Жыл бұрын

  took a nice little hit @ 2:32. Those XTR tires look nice.

• 
  @knowair6767 Жыл бұрын

  Yeah, Arrma tough!!👌🤘🍻 I put the TC tires on cuz they wouldn't clear the stubs of my Kronos xtr after fitting Tekno hex adapters to it. Well, without shimming anyways. I feel like the TC tires grab as well as backflip MT'S but not as thick in the sidewalls.

• 
  @BeautyBeastRC Жыл бұрын

  When it goes from -15 to 35 I bet it's like summertime 🤣🤣

• 
  @knowair6767 Жыл бұрын

  Indeed!! Sorry I took down the original vids from Sunday. I accidentally grabbed the SD files only..Doh!! A true Homer move,LOL. One day maybe I'll have some ability to actually edit this crap I'm posting. HaHa 🤔😉

• 
  @BeautyBeastRC Жыл бұрын

  Is it certain bearings or more like all of them? Great bash! 👍

• 
  @knowair6767 Жыл бұрын

  Hub bearings mostly, sometimes the diff outdrives too. Some rigs seem more tolerant than others..doesn't really make sense but that's my experience. I seized up the hub and outdrive bearings really quickly on the xmaxx last year..soaked them in PB blaster after removing the seals..got them free'd, cleaned,repacked with wheel bearing grease(automotive). Still going to this day!! I have cleaned and repacked since though. I really just can't resist the urge to bash in snow..totally worth it to me😁🤣🤣