I've had Origo 2000 for many years and now 6000 for the last 5 years, learned that the burners must be used frequently and filled with 1 liter fuel each. With that small rule they perform as good as a propane stove. If you leave them for longer periods a lot of water remains in the burners and they burn much cooler. I really like my 6000 and especially when I found a fuel source that's not as expensive. Propane is still way cheaper but then again, a really don't want to make my boat a sailing bomb. :)
@jerkerpettersson136420 күн бұрын
Hji har bra erbjudande nu på en Mini2 se 2990:- grym masin för pengarna 30min flygtid
@onthesurf19 күн бұрын
Har du någon länk eller dyligt så jag kan kolla specifikationer?
@Ramenscooter29 күн бұрын
Make more canesters
@eduardomurphy98942 ай бұрын
Very well explained, good job. Meticulousness and patience above all. Greetings from Buenos Aires
@onthesurf2 ай бұрын
Many thanks, tell your friends to subscribe and help the channel grow
@cowboyholtby14282 ай бұрын
What singer model u have ?
@onthesurf2 ай бұрын
Heavy duty 4423 kzread.info/dash/bejne/lnmWk7NtiMjTqsY.htmlsi=IYcIyJy8GSRQlePK
@esatakyuz36042 ай бұрын
Merhaba Albin hız mil olarak nekadar hızlı
@onthesurf2 ай бұрын
1 knot = 1,15mph 1mph = 0,869 knot My normal cruising speed is about 6-7 knot 7*1,15=8,05mph Topspeed about 12kn = 13,8mph
@esatakyuz36042 ай бұрын
@@onthesurf peki 2000devirde kaç knot
@onthesurf2 ай бұрын
@@esatakyuz3604 about 8-9
@esatakyuz36042 ай бұрын
@@onthesurf peki Albin kaç HP?
@esatakyuz36042 ай бұрын
@@onthesurf 24-30 HP
@redwood19574 ай бұрын
Could you show a photo of the bottom of the burner? Thank you
@onthesurf4 ай бұрын
You mean the burner for the oven?
@redwood19574 ай бұрын
@@onthesurf the one the alcohol goes into. Mine has a hole that sits on the air or flame setting ajustment
@onthesurf4 ай бұрын
@@redwood1957 you put alcohol in direct in the burner (the one im refurbishe) you just pore it on the rockwool/the net (have it standing upp when you fill it, because you have it on the side and fill untill it flows over its going to be about half when its laying flat = full) I just upploaded 4 short videos on the burners to my Patreon (link in the video description) thats what i could uppload fast and easy (no editing needed) maby i can do a full "how to" video when i have launched the boat
@onthesurf4 ай бұрын
I will try and help you with this but i cant send pictures here, if you want you can join my Patreon, then we can use the chat and send pictures/vids and talk direct. I will try and make a full how to vid on the hole origo 6000 in the future, but it will take som time
@redwood19574 ай бұрын
That's fine I have an older orego.
@prof.heinous1914 ай бұрын
Thanks for making these! I do hope they start re-manufacturing, I'm after an Origo 3000.
@onthesurf4 ай бұрын
The epoxy video are loading up (Had som computer problem)
@WalkDK5 ай бұрын
Does this go in the Albin 25?
@onthesurf5 ай бұрын
No its going in my Albin 30, (the big sister to A25, its basic the same only bigger)
@WalkDK5 ай бұрын
How does the hull hold up after 50 years?
@onthesurf5 ай бұрын
Wery good, its the gelcoat that gets boring, but a new layer with gelcoat or polyuretan paint and it is as good or better than new
@kimjongmill44456 ай бұрын
Super looking foreward to these being produced again!
@MrChris209127 ай бұрын
Would love to see these ovens being produced again! In addition to sailors, tiny house owners and RV campers are starting to like these a lot as well.
@onthesurf7 ай бұрын
I will do what i can to get them in production as fast as possible
@westerlundt8 ай бұрын
Tjena! Kul att se dina videos! Jag har en snipa, monark 690 och är en glad amatör som kollar videos för att försöka lära mig mer. Tror det var du som lärde mig att alltid fetta in lagren på trailern direkt efter att den varit i sjön 👍 Nu tänkte jag fråga vart du köpt det där setet med mässingsborstar? Verkar inte finnas på någon av de klassiska butikerna i Sverige. Amazon vågar man väl inte köpa ifrån? /Tommy
@onthesurf8 ай бұрын
Tack så mycket, ja det med lagerfett är ett knep jag alltid använt o det är även med i någon av de äldre videorna, Jag hittade detta settet på Hornbach i Kristianstad (glöm inte o prova med en magnet, fastnar den på borsten så är trådarna järn med ett ytskikt av mässing = skadad/förstörd propp. ENDAST ren/solid mässing får användas. Ja här finns video på mycket o mer kommer efterhand, vill man ha ännu mer o även mer hjälp, direct chat o massa annat så kan du kolla in min Patreon (länk finns i video beskrivningen)
@onthesurf8 ай бұрын
As you can se in the vid, i have cross tied it to the bolts, so its not going anywhere
@paulo602558 ай бұрын
I would have built the riser without the engine grabbing plates, and mount them afterwards to keep the engine from loosening itself from the transom and slipping overboard.
@kristinamoncayo4846 ай бұрын
so then do it bro stop watching the video lmao
@UguysRnuts14 күн бұрын
Absolutely right Paulo. The plates became completely useless after adding those ridiculously over-built steel risers and massive, cast eyebolts. Way too much weight at the worst possible place. The motor is now too high and will cavitate excessively as soon as he tries to turn. Also, sealant needs to cure before bolts get fully tightened or it will just squeeze out. Since he also neglected to through-bolt the engine to the transom, as stipulated in the owner's manual, I expect this o/b is going to end up at the bottom of the fjord.
@Rick-qf5de8 ай бұрын
I made a plate similar to mount on my ex-girlfriends backpack... Installed a 3hp.. and bet her she couldn't make it through the surf and 3 or 4 ft waves. Keyword ex-girlfriend... 😢
@TURBOGARY19 ай бұрын
Thanks for this video. I copied this and it worked perfect
@onthesurf9 ай бұрын
Happy to help 😎
@stefanhakansson766211 ай бұрын
Behövs ngn app för att styra, eller hittar "typ" Spotify den?
@onthesurf11 ай бұрын
Ingen extra app, bara att ansluta via Bluetooth o starta Spotify
@nicovl11 ай бұрын
mutch = much :)
@EdEdelenbos Жыл бұрын
Great looking meal
@mattwaters6987 Жыл бұрын
Well done!
@sigmasailor5162 Жыл бұрын
I want one
@thomasskadsheim8367 Жыл бұрын
Godt å sjefen sjøl på youtube 😁😉
@onthesurf Жыл бұрын
Javisst o mer kommer :)
@MegaStaffen Жыл бұрын
Hej. Tack för en bra video 👍. Har letat efter en sådan. Är den till salu?
@onthesurf Жыл бұрын
Tyvärr, tog mig 4år att hitta en. Dock så kommer den nog förhoppningsvis att börja tillverkas igen. Jag har kontakt med tänkt tillverkare
@onthesurf Жыл бұрын
Så om du känner fler som kan vara intresserade av dessa (både 1, 2 lågigt o 2lågigt+ugn) säg till dom att prenumerera o sedan skriva en kommentar, något i stil med "vill ha" När tillräckligt många är intresserade så börjar tillverkningen
@mittensajag Жыл бұрын
Är det modell 3247f190?
@onthesurf Жыл бұрын
Får kolla när barnen somnat
@onthesurf Жыл бұрын
3266f278 Men alla som ser ut så i toppen ska fungera lika dant enligt den infon jag hittat (köpte 2 olika packningssatser o med dessa 2 så ska man kunna packa om vilken cav pump som
@JohnBraman413 Жыл бұрын
got your work cut out for you. do one task at a time so you don't get frustrated.
@EdEdelenbos Жыл бұрын
Lots of work.
@onthesurf Жыл бұрын
Yes, one thing at a time and before you know it, its done
@christopherslaney6405 Жыл бұрын
I didn’t understand what type of oil you’re using.
@onthesurf Жыл бұрын
Soap for wood cleaning, there are green, white etc. I use the green one
@onthesurf Жыл бұрын
Its based on linseed oil
@onthesurf Жыл бұрын
linseed soap, here in Sweden its green, in your country it can be a different color
@EdEdelenbos Жыл бұрын
Defroster is the blower that takes the mist off the window,
@luckymunkey77. Жыл бұрын
I am in the process of trying to figure out where my wires go. I have so many wires that do not go anywhere. One end is hooked up to buss bar. But other end is cut and taped. So I have been removing them. I’m just getting started on my 1975 albin 25. It also has a Sabb motor. It has solar. A refrigerator freezer. It has the sail option also. But I will not use the sail.
@onthesurf Жыл бұрын
I took AL kabels out and started from scratch, if i remeber correct 70kg of gost stuff just laying around
@JohnBraman413 Жыл бұрын
i'm checking out an albin 34 that has an isuzu diesel engine. are those any good?
@onthesurf Жыл бұрын
I never had a Isuzu engine, so i dont know
@JohnBraman413 Жыл бұрын
if you could find a used ford leyman engine, that make for a good repower engine...if it would fit.
@luckymunkey77. Жыл бұрын
I just bought a albin 25. It has a single cylinder Sabb motor. I enjoy your videos of your albin. Maybe I can ask you some questions if I need too. I’m in USA. But can send you email with any concerns I have.
@onthesurf Жыл бұрын
On the surf Facebook is best for contact facebook.com/profile.php?id=100067804628777
@luckymunkey77. Жыл бұрын
I just purchased a albin 25. It needs some love. I enjoy your videos.
@JohnBraman413 Жыл бұрын
looking forward to seeing a tour of the boat.
@lokiamir5029 Жыл бұрын
Var köpte du grejerna ifrån? Jag behöver höja min också men jag är sämst på att bygga ihop, behöver också höja 5 centimeter. Om du kan bygga en så kan jag köpa den av dig.
@onthesurf Жыл бұрын
Gick till närmsta plåtverkstad o bockade en rostfri plåt i 2-3mm. Sen en vattentålig "träkloss" som är lika tjock som akterspegel o så hög som man behöver höja (ta med klossen o säg att den ska vikas runt denna, se till så du gör den ordentligt längre så det går att bulta fast det ordentligt
@JohnBraman413 Жыл бұрын
what other boat you gonna look at?
@onthesurf Жыл бұрын
we have bought a ~10m motor yacht. Look for the next episode 😎
@JohnBraman413 Жыл бұрын
@@onthesurf a 30 footer? alot more room for the family.
@onthesurf Жыл бұрын
Yes and ~1m wider 😎
@andersspets4239 Жыл бұрын
Blev det ny båt?
@onthesurf Жыл бұрын
Japp, det blev en ca10m lång motor yacht 😎. Håll utkik efter nästa episod
@dieselram05 Жыл бұрын
Love all the videos of your Albin and the projects! What hull number is yours?
@onthesurf Жыл бұрын
If i remeber corect its 174
@dieselram05 Жыл бұрын
@@onthesurf wow, that’s a early number Mine is hull #1727
@jamesmaddox75652 жыл бұрын
Your bottom is black and my choice. My wife wanted the blue to match the rub rail. Is there an advantage to black?
@onthesurf2 жыл бұрын
You dont see the slime and other crap that sticks to the boat, just wait until you put it in the Hard to clean it
@jamesmaddox75652 жыл бұрын
I enjoy your projects and the Dad that you are with your boys climbing on, over and under you as you work without even a stearn thought!!!!! You have alot of talent and know how to pass it to us in not your native tongue. Thanks from the Chesapeake Bay in Maryland. Jim Maddox A-25 ANNA-LYNN
@onthesurf2 жыл бұрын
Many thanks😎
@onthesurf2 жыл бұрын
is ther any Facebook group that is aboat boat in general, in your country? if so can you post Link ore the name of THE group
@jamesmaddox75652 жыл бұрын
@@onthesurf Trailer Trawlers is one and i think a second is Boats under 33'.
@davidzoltan52632 жыл бұрын
Unfortunately you didn't show us how it perform with the upgrade but thanks a lot for the video
@onthesurf2 жыл бұрын
Faster, easy to get up on plane, and almost no nose pitch ( nose pitch = the Bow stands up in the air and you need to move to get the nose down and up on plane)
@onthesurf2 жыл бұрын
Can make a vid when i drive it next
@JohnBraman4132 жыл бұрын
a good cleaner i use is simple green.
@onthesurf2 жыл бұрын
is ther any Facebook group that is aboat boat in general, in your country? if so can you post Link ore the name of THE group
@onthesurf2 жыл бұрын
What time is best fore you? (Dont forget to tell me your time zone or were you are)
@onthesurf2 жыл бұрын
Vilken tid passar er bäst?
@mckagan1232 жыл бұрын
Hej! Jag behöver montera en stävögla på min albin för att kunna traila av och på båten. Har ni en stävögla monterad? Och i så fall, hur har ni gjort på insidan med förstärkning? Mvh
@onthesurf2 жыл бұрын
Japp monterade stävövgla, ska se om jag hittar bilderna, annars kommer förklaring live inom snar framtid
@onthesurf2 жыл бұрын
Är en enkel beskrivning på vår live sändning igår kväll
@alexandermoseley922 жыл бұрын
Another great video! Are you planning for a long trip on the boat this summer? Does Sandra enjoy boatlife? What do the both of you do for a living? How did you guys meet?
@alexandermoseley922 жыл бұрын
Would be fun if you had a Q@A to know more about your background and your job.
@onthesurf2 жыл бұрын
Will doo 😃😎
@assarsjoblom5372 жыл бұрын
Superbra video! Vad för svart färg använde du till kanterna?
Пікірлер
I've had Origo 2000 for many years and now 6000 for the last 5 years, learned that the burners must be used frequently and filled with 1 liter fuel each. With that small rule they perform as good as a propane stove. If you leave them for longer periods a lot of water remains in the burners and they burn much cooler. I really like my 6000 and especially when I found a fuel source that's not as expensive. Propane is still way cheaper but then again, a really don't want to make my boat a sailing bomb. :)
Hji har bra erbjudande nu på en Mini2 se 2990:- grym masin för pengarna 30min flygtid
Har du någon länk eller dyligt så jag kan kolla specifikationer?
Make more canesters
Very well explained, good job. Meticulousness and patience above all. Greetings from Buenos Aires
Many thanks, tell your friends to subscribe and help the channel grow
What singer model u have ?
Heavy duty 4423 kzread.info/dash/bejne/lnmWk7NtiMjTqsY.htmlsi=IYcIyJy8GSRQlePK
Merhaba Albin hız mil olarak nekadar hızlı
1 knot = 1,15mph 1mph = 0,869 knot My normal cruising speed is about 6-7 knot 7*1,15=8,05mph Topspeed about 12kn = 13,8mph
@@onthesurf peki 2000devirde kaç knot
@@esatakyuz3604 about 8-9
@@onthesurf peki Albin kaç HP?
@@onthesurf 24-30 HP
Could you show a photo of the bottom of the burner? Thank you
You mean the burner for the oven?
@@onthesurf the one the alcohol goes into. Mine has a hole that sits on the air or flame setting ajustment
@@redwood1957 you put alcohol in direct in the burner (the one im refurbishe) you just pore it on the rockwool/the net (have it standing upp when you fill it, because you have it on the side and fill untill it flows over its going to be about half when its laying flat = full) I just upploaded 4 short videos on the burners to my Patreon (link in the video description) thats what i could uppload fast and easy (no editing needed) maby i can do a full "how to" video when i have launched the boat
I will try and help you with this but i cant send pictures here, if you want you can join my Patreon, then we can use the chat and send pictures/vids and talk direct. I will try and make a full how to vid on the hole origo 6000 in the future, but it will take som time
That's fine I have an older orego.
Thanks for making these! I do hope they start re-manufacturing, I'm after an Origo 3000.
The epoxy video are loading up (Had som computer problem)
Does this go in the Albin 25?
No its going in my Albin 30, (the big sister to A25, its basic the same only bigger)
How does the hull hold up after 50 years?
Wery good, its the gelcoat that gets boring, but a new layer with gelcoat or polyuretan paint and it is as good or better than new
Super looking foreward to these being produced again!
Would love to see these ovens being produced again! In addition to sailors, tiny house owners and RV campers are starting to like these a lot as well.
I will do what i can to get them in production as fast as possible
Tjena! Kul att se dina videos! Jag har en snipa, monark 690 och är en glad amatör som kollar videos för att försöka lära mig mer. Tror det var du som lärde mig att alltid fetta in lagren på trailern direkt efter att den varit i sjön 👍 Nu tänkte jag fråga vart du köpt det där setet med mässingsborstar? Verkar inte finnas på någon av de klassiska butikerna i Sverige. Amazon vågar man väl inte köpa ifrån? /Tommy
Tack så mycket, ja det med lagerfett är ett knep jag alltid använt o det är även med i någon av de äldre videorna, Jag hittade detta settet på Hornbach i Kristianstad (glöm inte o prova med en magnet, fastnar den på borsten så är trådarna järn med ett ytskikt av mässing = skadad/förstörd propp. ENDAST ren/solid mässing får användas. Ja här finns video på mycket o mer kommer efterhand, vill man ha ännu mer o även mer hjälp, direct chat o massa annat så kan du kolla in min Patreon (länk finns i video beskrivningen)
As you can se in the vid, i have cross tied it to the bolts, so its not going anywhere
I would have built the riser without the engine grabbing plates, and mount them afterwards to keep the engine from loosening itself from the transom and slipping overboard.
so then do it bro stop watching the video lmao
Absolutely right Paulo. The plates became completely useless after adding those ridiculously over-built steel risers and massive, cast eyebolts. Way too much weight at the worst possible place. The motor is now too high and will cavitate excessively as soon as he tries to turn. Also, sealant needs to cure before bolts get fully tightened or it will just squeeze out. Since he also neglected to through-bolt the engine to the transom, as stipulated in the owner's manual, I expect this o/b is going to end up at the bottom of the fjord.
I made a plate similar to mount on my ex-girlfriends backpack... Installed a 3hp.. and bet her she couldn't make it through the surf and 3 or 4 ft waves. Keyword ex-girlfriend... 😢
Thanks for this video. I copied this and it worked perfect
Happy to help 😎
Behövs ngn app för att styra, eller hittar "typ" Spotify den?
Ingen extra app, bara att ansluta via Bluetooth o starta Spotify
mutch = much :)
Great looking meal
Well done!
I want one
Godt å sjefen sjøl på youtube 😁😉
Javisst o mer kommer :)
Hej. Tack för en bra video 👍. Har letat efter en sådan. Är den till salu?
Tyvärr, tog mig 4år att hitta en. Dock så kommer den nog förhoppningsvis att börja tillverkas igen. Jag har kontakt med tänkt tillverkare
Så om du känner fler som kan vara intresserade av dessa (både 1, 2 lågigt o 2lågigt+ugn) säg till dom att prenumerera o sedan skriva en kommentar, något i stil med "vill ha" När tillräckligt många är intresserade så börjar tillverkningen
Är det modell 3247f190?
Får kolla när barnen somnat
3266f278 Men alla som ser ut så i toppen ska fungera lika dant enligt den infon jag hittat (köpte 2 olika packningssatser o med dessa 2 så ska man kunna packa om vilken cav pump som
got your work cut out for you. do one task at a time so you don't get frustrated.
Lots of work.
Yes, one thing at a time and before you know it, its done
I didn’t understand what type of oil you’re using.
Soap for wood cleaning, there are green, white etc. I use the green one
Its based on linseed oil
linseed soap, here in Sweden its green, in your country it can be a different color
Defroster is the blower that takes the mist off the window,
I am in the process of trying to figure out where my wires go. I have so many wires that do not go anywhere. One end is hooked up to buss bar. But other end is cut and taped. So I have been removing them. I’m just getting started on my 1975 albin 25. It also has a Sabb motor. It has solar. A refrigerator freezer. It has the sail option also. But I will not use the sail.
I took AL kabels out and started from scratch, if i remeber correct 70kg of gost stuff just laying around
i'm checking out an albin 34 that has an isuzu diesel engine. are those any good?
I never had a Isuzu engine, so i dont know
if you could find a used ford leyman engine, that make for a good repower engine...if it would fit.
I just bought a albin 25. It has a single cylinder Sabb motor. I enjoy your videos of your albin. Maybe I can ask you some questions if I need too. I’m in USA. But can send you email with any concerns I have.
On the surf Facebook is best for contact facebook.com/profile.php?id=100067804628777
I just purchased a albin 25. It needs some love. I enjoy your videos.
looking forward to seeing a tour of the boat.
Var köpte du grejerna ifrån? Jag behöver höja min också men jag är sämst på att bygga ihop, behöver också höja 5 centimeter. Om du kan bygga en så kan jag köpa den av dig.
Gick till närmsta plåtverkstad o bockade en rostfri plåt i 2-3mm. Sen en vattentålig "träkloss" som är lika tjock som akterspegel o så hög som man behöver höja (ta med klossen o säg att den ska vikas runt denna, se till så du gör den ordentligt längre så det går att bulta fast det ordentligt
what other boat you gonna look at?
we have bought a ~10m motor yacht. Look for the next episode 😎
@@onthesurf a 30 footer? alot more room for the family.
Yes and ~1m wider 😎
Blev det ny båt?
Japp, det blev en ca10m lång motor yacht 😎. Håll utkik efter nästa episod
Love all the videos of your Albin and the projects! What hull number is yours?
If i remeber corect its 174
@@onthesurf wow, that’s a early number Mine is hull #1727
Your bottom is black and my choice. My wife wanted the blue to match the rub rail. Is there an advantage to black?
You dont see the slime and other crap that sticks to the boat, just wait until you put it in the Hard to clean it
I enjoy your projects and the Dad that you are with your boys climbing on, over and under you as you work without even a stearn thought!!!!! You have alot of talent and know how to pass it to us in not your native tongue. Thanks from the Chesapeake Bay in Maryland. Jim Maddox A-25 ANNA-LYNN
Many thanks😎
is ther any Facebook group that is aboat boat in general, in your country? if so can you post Link ore the name of THE group
@@onthesurf Trailer Trawlers is one and i think a second is Boats under 33'.
Unfortunately you didn't show us how it perform with the upgrade but thanks a lot for the video
Faster, easy to get up on plane, and almost no nose pitch ( nose pitch = the Bow stands up in the air and you need to move to get the nose down and up on plane)
Can make a vid when i drive it next
a good cleaner i use is simple green.
is ther any Facebook group that is aboat boat in general, in your country? if so can you post Link ore the name of THE group
What time is best fore you? (Dont forget to tell me your time zone or were you are)
Vilken tid passar er bäst?
Hej! Jag behöver montera en stävögla på min albin för att kunna traila av och på båten. Har ni en stävögla monterad? Och i så fall, hur har ni gjort på insidan med förstärkning? Mvh
Japp monterade stävövgla, ska se om jag hittar bilderna, annars kommer förklaring live inom snar framtid
Är en enkel beskrivning på vår live sändning igår kväll
Another great video! Are you planning for a long trip on the boat this summer? Does Sandra enjoy boatlife? What do the both of you do for a living? How did you guys meet?
Would be fun if you had a Q@A to know more about your background and your job.
Will doo 😃😎
Superbra video! Vad för svart färg använde du till kanterna?