Пікірлер

• 
  @usuario-nk6hq13 сағат бұрын

  If i have a 22" bass drum, Do I have to buy the 22" or the 20"?

• 
  @dpinskey4 күн бұрын

  Tip: for 0 latency triggering connect the MIDI output of your DDRUMS DDTi to the MIDI input of a MIDI compliant keyboard (which should automatically connect via MIDI channel 10) to trigger the keyboard’s onboard drum samples (NO COMPUTER REQUIRED). This will also allow you to use the keyboard’s audio output to connect to a PA or monitoring console. You can simultaneously connect the DDTi to a computer via USB to trigger and record any MIDI information and samples you might want to capture in a DAW session. Just remember not to monitor that info on your DAW so as to preserve the 0 latency monitoring from the keyboard.

• 
  @bnmobildirecto39497 күн бұрын

  Moongel is the best for ring thank you for inventing it’s a life saver

• 
  @musico71567 күн бұрын

  HI HAT si sente anche quando è fermo. FAKE!!! 👎👎👎

• 
  @tallen1_113 күн бұрын

  Thanks man

• 
  @anwdrumexperience13 күн бұрын

  My girl

• 
  @user-to2uj5nq5c16 күн бұрын

  Aaaaayyy....

• 
  @Kashipom29 күн бұрын

  Always wondered if it was manually or a robotic injection mold!!!

• 
  @Kashipom29 күн бұрын

  Where has this been my whole life!!! 😂😂

• 
  @clearestapricotpencil4125Ай бұрын

  this is really cool actually?? I didn't know they had triggers that slip on just like that. neat

• 
  @RTOMCorporation26 күн бұрын

  visit rtom.com for more information!

• 
  @CarlosGonazelezGomezEricaGomezАй бұрын

  i Love Moongel

• 
  @Gjallarhorn84Ай бұрын

  This needs a Kiffness collab

• 
  @RTOMCorporationАй бұрын

  😆

• 
  @Gjallarhorn84Ай бұрын

  Can't believe that I had the black holes for three years and I just discovered the existence of their own triggers, for someone like me who've never used triggers and only played on acoustic kits for three decades, this is like when I discovered that we can watch KZread on our phones

• 
  @Gjallarhorn84Ай бұрын

  I think this is the youngest brother of Mick Jagger you guys

• 
  @RTOMCorporationАй бұрын

  🤣

• 
  @woodendoors9532Ай бұрын

  Are you 12?

• 
  @youtubealgorithm5977Ай бұрын

  Good content, let's make this guy blowup

• 
  @KashipomАй бұрын

  My favorite go to workout pad of ALL time!!!

• 
  @taraslysenko5254Ай бұрын

  Hello. Seeking help. I am using Alesis strike module with black hole heads and triggers but not able to remove double triggering no matter what setting I am adjusting. I am using mono cable for black hole trigger and also tried trs cable and result a little bit better when I eliminating rims sounds Do you have experience with the same issue or maybe you have a solution for my setup. Thank you in advance.

• 
  @RTOMCorporationАй бұрын

  Customer Support replied via email 9 days ago. Did you receive the email? If not, please check your spam.

• 
  @taraslysenko5254Ай бұрын

  Hello. Seeking help. I am using Alesis strike module with black hole heads and triggers but not able to remove double triggering no matter what setting I am adjusting. I am using mono cable for black hole trigger and also tried trs cable and result a little bit better when I eliminating rims sounds Do you have experience with the same issue or maybe you have a solution for my setup. Thank you in advance.

• 
  @pablogodi1392Ай бұрын

  menuda tomadura de pelo

• 
  @adhelsanchez9260Ай бұрын

  Partituras!

• 
  @MusicInLifeMattersАй бұрын

  any reaction videos on this already? :D

• 
  @rodrigopradoromeroАй бұрын

  "And for the Roland Td-17, what parameters should I set to get the best trigger response?"

• 
  @RTOMCorporationАй бұрын

  Since every kit setup is unique, factors like drumhead tension can affect how each BH trigger performs. If you encounter any difficulties while using your triggers don't hesitate to contact our support team through the "contact us" page on our website at rtom.com.

• 
  @JacobWalker-ow4slАй бұрын

  Hey man that dude is ill

• 
  @Mort8492 ай бұрын

  I like these geads because they are quiet but if you play loud then you will get a acoustic sound

• 
  @BlackHeartJK272 ай бұрын

  New gels with new skins.

• 
  @Kashipom2 ай бұрын

  Love the feel of my 14 inch moon gel pad, now time to buy this!!!! Great video!!!!

• 
  @RTOMCorporation2 ай бұрын

  Glad to hear!!!

• 
  @gorpazorp73092 ай бұрын

  If it says corporation in the name, we don’t buy

• 
  @RTOMCorporation2 ай бұрын

  What offends you about the word "Corporation?"

• 
  @_Xypes_2 ай бұрын

  OMG TY I HAVE WANTED THIS FOR SO LONG

• 
  @RTOMCorporationАй бұрын

  Great to hear!!

• 
  @aka_king2 ай бұрын

  It’s the same thing, if anything the other carrying case was so much better, now i’ll keep the old carrying case and put the moongels in it when i need to carry them around

• 
  @RTOMCorporation2 ай бұрын

  We understand missing the old case. Change can be difficult. However, the new packaging reduces waste, which is always a plus and doubles as storage. Try it out you might become a fan!

• 
  @timsmith78992 ай бұрын

  Fantastic.

• 
  @elgustoesmiochupaki61192 ай бұрын

  One square of the gel over the tone arm head shell and another where the tone arm reaches the pivot, at the back.

• 
  @elgustoesmiochupaki61192 ай бұрын

  Are you gone all crazy? This is what I was told when I let the world know I use this wonder gel on my tonearm fitted with a 12 hundred dollar cartridge, with a Shibata diamond stylus mounted on a boron cantilever. I had already installed the excellent K.A.B. Silicone trough at the base of the arm pivot to quell tonearm resonance. Then 6 months later I decided to try the moon gel. I must say it actually increased the effect of serenity and staid performance from the cartridge/ tone arm combo. This was evident on better defined bass, cleaner transients and even smoother full symphony crescendos with more detail into the 20 kilohertz and beyond. Of course I calibrated the tone arm to operate with the extra weight. Don’t forget about that. It is crucial. The cartridge and the tone arm functions as a percussion instrument after all. Think about it.

• 
  @RTOMCorporation2 ай бұрын

  Interesting!

• 
  @JayKayEllEmm2 ай бұрын

  Would a similar method work for wood hoops or are you just out of luck in that case?

• 
  @RTOMCorporation2 ай бұрын

  Yes! Same would apply for wooden hoops. However the fit would look slightly different.

• 
  @dominikn192 ай бұрын

  E L V I N ! ! !

• 
  @carmenip69243 ай бұрын

  hi such a good job~~~can I get the pdf file of this? thank you so much

• 
  @RTOMCorporation3 ай бұрын

  All of our transcriptions can be found at RTOM.com. Here is the link: rtom.com/drumtranscriptions/

• 
  @alessandrorigobello75513 ай бұрын

  Genius

• 
  @universalmeditation86313 ай бұрын

  It’s when the glasses came off when I realized something…😂

• 
  @garyvillarreal44783 ай бұрын

  I bought them and th DDti drum module just couldnt give me the right response for snare and for bass drum, i tried everything, changing triggers from possition, turning on and off the module, loosen and tighten the mesh heads, i even tried different modules but turns out the best answer i could have was with the ddti. i cant manage how to stop the bass drum to have false triggerings as well as the snare. any suggestions or help? i tried everything i could imagine but its frustrating to make such a big investment in equipment and not seing the desired results. HEEELP!

• 
  @RTOMCorporation3 ай бұрын

  Please send an email on the contact us page of rtom.com so we can provide support. Are you using ts cables?

• 
  @Kashipom3 ай бұрын

  Love the clear case!!! I have a fetish looking at my moon gels 😂😂

• 
  @RTOMCorporation3 ай бұрын

  😂

• 
  @miasmith33493 ай бұрын

  "Happy early birthday to me"

• 
  @RTOMCorporation3 ай бұрын

  LOL!

• 
  @JayKayEllEmm3 ай бұрын

  Do your triggers work with Yamaha modules?

• 
  @RTOMCorporation3 ай бұрын

  Yes, they work with most modules that allow for 1/4 inch cable connections. However, BH triggers must be used with TS cables since they are single zone triggers to avoid double triggering.

• 
  @taraslysenko5254Ай бұрын

  Hello. I am using Alesis strike module and connect bh triggers via ts cable but constantly getting double triggering no matter what setting I am adjusting. I really like your product but can not make it work properly. I would appreciate any help Thank you

• 
  @RTOMCorporationАй бұрын

  @@taraslysenko5254 Please send us an email via contact us page at rtom.com. A agent will be able to provide support with your issue.

• 
  @taraslysenko5254Ай бұрын

  Thank you. Sent it. Waiting for your response. Highly appreciate your help

• 
  @user-vu5ov8xf6n3 ай бұрын

  are the mesh heads on the black holes user replaceable if they ever rip?

• 
  @RTOMCorporation3 ай бұрын

  All our mesh heads come with a 1-year manufacturers warranty. However, the mesh is made from a heavy duty material that is not known to easily rip.

• 
  @Nhenley213 ай бұрын

  U need better flow and timing. Id work on ur technique as well.

• 
  @franklozano70123 ай бұрын

  Too good 😮

• 
  @LauraThompson-iq1jm3 ай бұрын

  Not stoppin til 👁️get enough 🥁🤍🥁✨✨✨🐝

• 
  @JayKayEllEmm4 ай бұрын

  If I wanted to, hypothetically, mount a cowbell onto the rim of my floor tom, could I conceivably do that with a black hole head on? I’m aware I’d have to adjust the width, but I’m just wondering if it can be done without causing damage to the rim of the black hole.

• 
  @RTOMCorporation4 ай бұрын

  Hi there - thanks for your question! What type of mounting rig would you be using?

• 
  @JayKayEllEmm4 ай бұрын

  @@RTOMCorporation something like the Latin Percussion LP Claw.

• 
  @RTOMCorporation4 ай бұрын

  @dumpster_mcgee_96 The Black Hole Practice System is not designed to be compatible with a cowbell mount.

• 
  @ochd15024 ай бұрын

  Nah, I'm using chewing gum

• 
  @awmaace33974 ай бұрын

  Sorry no...

• 
  @severinstirnemann67174 ай бұрын

  definitely.. thee things are great. can even be used on cymbals!

• 
  @marcosdepaula35934 ай бұрын

  Thanks for the awesome review! Why not use the low volume cymbals?

• 
  @RTOMCorporation4 ай бұрын

  We have definitely used low-volume cymbals in other vids, just opted not to in this one!