Пікірлер

• 
  @agoradiazfleitas85154 күн бұрын

  Good❤

• 
  @guts350228 күн бұрын

  the wires going to my control housing seem to be real short. if you pull on them do they have more length tucked away in the headlight bucket?

• 
  @bobberbud28 күн бұрын

  Yes, i was able to get the extra length that was tucked away in the headlight

• 
  @guts350228 күн бұрын

  @@bobberbud thanks !

• 
  @jonathna11Ай бұрын

  Im 6,4 and i want this bike to ride around with do tou recommend it?

• 
  @trent1059Ай бұрын

  what is the brand of the windshield bag?

• 
  @kirbybegay4251Ай бұрын

  Stupid 😂😂

• 
  @davidmurray91932 ай бұрын

  Sounds better but id defo go full after market all through sounds well cool

• 
  @duderainman2 ай бұрын

  Shit im Good at 65mph

• 
  @TomSestilio3 ай бұрын

  Windscreen link brother ?

• 
  @joshuabenoit37443 ай бұрын

  Is that a stock size rear tire? I am putting those mufflers on mine today.

• 
  @thegreatest1yet3 ай бұрын

  My baffles got stuck inside….how the hell do you remove them

• 
  @Txcowboy803 ай бұрын

  just ride it, they will fall out eventually if you don't want to remove the exhaust.

• 
  @MmotochikK3 ай бұрын

  Hey can you tell me how long your brake line Is? 66 inches or 72 ? I have the same bike and handle bars with the same brake line and my guy keeps telling me the brake line is too short. I click on your link, for the brake line, and it takes me to the one I purchased. Help please.

• 
  @bobberbud28 күн бұрын

  Sorry for late response, The clutch cable from this kit is 50mm or 1.96in longer than stock and the brake line is 102mm or 4.02in longer than stock

• 
  @bobberbud28 күн бұрын

  Not sure on total length

• 
  @Runlillyrun4 ай бұрын

  85 m - 135 km

• 
  @jimlamy87024 ай бұрын

  the stock clamps are too tight, what did you use for clamps?

• 
  @s4d1st174 ай бұрын

  bro gave me anxiety

• 
  @TruthSeeker90385 ай бұрын

  I just did this to mine. Sounds a lot better than the stock exhaust, but I still want beefier louder exhaust in the future. My brother said I need to get a tune but I’m not sure it’s necessary

• 
  @patwalker98906 ай бұрын

  Given that most motorcycles have an optimistic speedometer (+10% is normal) you're really seeing high70's. Both my Hondas were that way.

• 
  @jonathanvu35316 ай бұрын

  Nice vid! Are you running the bassanis 'without' the stock/factory clamps OR did you order substitute clamps? Tx!

• 
  @hiltonlouque15047 ай бұрын

  I just went thru this and removal of stock exhaust was brutal!

• 
  @bobberbud7 ай бұрын

  yeah its quite the tussle. getting some grease in there couldve helped but ig were past that now 🤣

• 
  @ubozkurt8 ай бұрын

  No scrren

• 
  @Aoffmad8 ай бұрын

  Link for windahield plz

• 
  @digidrum20039 ай бұрын

  I'm gonna use the chair sitting method to remove my oem exhaust too😂. Getting my Gp exhaust in today. Thanks for the video.

• 
  @bobberbud9 ай бұрын

  i was dead after trying so long had to take a breather lol Hopefully yours won’t require the chair sitting method🤣 good luck

• 
  @bobberbud9 ай бұрын

  Helps to use some all purpose lubricant i realized that later lol

• 
  @baronrich429 ай бұрын

  where did you order your windshield? thanks

• 
  @bobberbud9 ай бұрын

  I got mine from amazon you can get it from revzilla as well but make sure to also get the trigger lock mount kit and turn signal relocation kit as well

• 
  @Pipes6187410 ай бұрын

  Would you say this would be a good first bike for a older rider looking to get one as my first bike love the way they look ,thanks

• 
  @bobberbud10 ай бұрын

  Well personally I started on a 300cc cruiser that was 200 lbs lighter but i wanted more within a week. I believe it could be a good starter bike for an older rider assuming their experience driving on roads would probably make them more careful with the power but honestly the power is quite easy to handle at initial gears solely in friction zone and even with throttle its all manageable. The bike could be heavy to some at first but it is low to the ground so it’ll help. But I am only 5’5” and 150 lbs and I have no problems. I think if you are a quick learner then yes that way you won’t have to upgrade for a while as well. It is quite easy to maintain and mod as well the only downside I’d say with that is the costs are higher than a lot of other bikes for parts/accessories but not too crazy. One other thing the bike stock from the factory is unbalanced in my experience the exhaust is very heavy and makes the bike favor the right side but that can always be replaced with an aftermarket muffler/exhaust. I changed mine and it felt balanced afterward. But yeah, if you’re careful and practice a lot you got it for sure. They do look awesome😁

• 
  @Pipes6187410 ай бұрын

  Thanks I'm a bigger guy 5'11" 245lbs and I'm 43 years old .I appreciate your input .

• 
  @remedyfordarkness9111 ай бұрын

  Been wanting to put bar end on my 2018 scout but didnt know how to go about it with stock handles

• 
  @michaelfoong2298 Жыл бұрын

  do the muffle clamps come with it?

• 
  @bobberbud11 ай бұрын

  They do but I did not put mine on

• 
  @chris387 Жыл бұрын

  Doing mine today

• 
  @omuerta7605 Жыл бұрын

  painful to watch

• 
  @MrPoliarinis Жыл бұрын

  You are the master of scratching the lamp 😉

• 
  @bobberbud Жыл бұрын

  😂 true stuff I’m surprised no one mentioned it til now haha

• 
  @MrPoliarinis Жыл бұрын

  30-50usd leds, with a brandname logo became a 160 usd leds 🤣🤣

• 
  @WniGrup Жыл бұрын

  0-60 in just over 2 minutes.

• 
  @bobberbud Жыл бұрын

  Lol not wrong

• 
  @Carlosization1 Жыл бұрын

  I have almost the identical bike. Is that a bobber or a 60? Just got through the same procedure. Is there a rubber gasket on yours?

• 
  @bobberbud Жыл бұрын

  Bobber sixty I do not have a rubber gasket on mine

• 
  @Carlosization1 Жыл бұрын

  Why was it shining on your roof?

• 
  @bobberbud Жыл бұрын

  I did not have the headlight screwed in i just put some strip of tape to hold it on because i was too lazy to actually screw it back on completely lol thats probably why

• 
  @Carlosization1 Жыл бұрын

  What fairing is that please??

• 
  @bobberbud Жыл бұрын

  It is the memphis shades gauntlet fairing with quick release.

• 
  @Carlosization1 Жыл бұрын

  @@bobberbud thank you, I like it a lot!

• 
  @Carlosization1 Жыл бұрын

  @@bobberbud hey Bob, why does it say on Amazon that that fairing doesn’t fit the Scout Bobber? Isn’t that what you have?

• 
  @bobberbud Жыл бұрын

  @@Carlosization1 Memphis Shades -Compatible with/Replacement for Gauntlet Fairing MEM7351 a.co/d/eaLbzCi This is the one i got hope it helps

• 
  @bobberbud Жыл бұрын

  @@Carlosization1 you also need the trigger lock mount kit and the turn signal relocation kit

• 
  @joshuabenoit3744 Жыл бұрын

  are the baffles in them?

• 
  @bobberbud Жыл бұрын

  They are indeed and the baffles are removable so you can do as you please

• 
  @christophermosier3754 Жыл бұрын

  Led is too brite

• 
  @bobberbud Жыл бұрын

  True It’s not really for everyone the stock light can be fine at night with slower speeds which is the safer plan of action when traveling at night anyway. I understand it might be blinding for oncoming traffic though which is why and of course for my safety too, I try not to ride at night.

• 
  @bobberbud Жыл бұрын

  But just in case I have to, I like to see far and wide and it makes sure other cars know i’m out here as well

• 
  @frapp31 Жыл бұрын

  My 1inch hole saw doesn't fit inside my exhaust on my 22 rogue.

• 
  @size19yeezys56 Жыл бұрын

  😩

• 
  @Curious_Skeptic Жыл бұрын

  Hmm, this has me thinking a 300 might be enough! I'm not looking to go anywhere close to 85!!!! LOL. Back country is my only goal. nice 40-60 mph range is more than enough to have fun and stay safe! Seeing how a new 300 is amount $2k cheaper than a 500...

• 
  @bobberbud Жыл бұрын

  For sure! If you plan to ride mostly backroads the 300 is definitely enough

• 
  @bobberbud Жыл бұрын

  It even cruises on the highway well at 60-70 mph this range is no problem for the 300

• 
  @stef_jean Жыл бұрын

  nicee! so much brighter!

• 
  @johnflesner8086 Жыл бұрын

  Load pipes are for riders with a tiny penis.

• 
  @Salt_Fields Жыл бұрын

  How loud are these? Hard to tell from a video

• 
  @bobberbud Жыл бұрын

  Check out my bassani sound test video!

• 
  @dacel88 Жыл бұрын

  i have these on my bike, they're quite loud when you're stood next to the bike on idle, but once you start riding it, it's just a nice deep rumble to be honest. Then again i am a 35 year old semi truck mechanic with most likely less than lackluster hearing so xD

• 
  @Sam-sd6qy Жыл бұрын

  But it doesn't change the 9 mtr exhaust hanging pass your wheel, unless you like it like that.

• 
  @bobberbud Жыл бұрын

  Well yeah it’s just a mod option for the stock exhaust you could always replace it if ya feel like. I did eventually to the bassani slip ons bc i was not satisfied by the look or sound

• 
  @85liez35 Жыл бұрын

  Could the bike handle the top speed for hours?

• 
  @bobberbud Жыл бұрын

  Technically yes it could but the top speed would probably be in-between 80-85 give or take couple mph (uphills/downhills). It is also a little buzzy.

• 
  @caddbrooks9020 Жыл бұрын

  Where did you order them from? I can not find them anywhere.

• 
  @bobberbud Жыл бұрын

  Revzilla! The link is in the description though so you can just click on that and it’ll take ya to what you’re looking for

• 
  @georgegould667 Жыл бұрын

  Where is the catalytic converter in the header pipes ?

• 
  @bobberbud Жыл бұрын

  If you’re asking where, specifically, in the header pipes it is located. That I do not know but it is somewhere in the header pipes lol.

• 
  @ThatDude318 Жыл бұрын

  Do you have a link for the saddle bags?

• 
  @bobberbud Жыл бұрын

  Sorry for the late response man yes here is the link for the bags: www.amazon.com/dp/B01HCPNL74?ref=ppx_pop_mob_ap_share

• 
  @FSUFan4 Жыл бұрын

  Not sure what I'm missing. What year is your scout bobber sixty? I have a 2023 and ordered the same mirrors. Cut my grip openings like you did. Mine is solid inside with a threaded opening for the screw. . There was no way for the longer inside piece to go into the grips.

• 
  @bobberbud Жыл бұрын

  I have the 2022 model but it seems you already have the threading inside so you can probably just get a universal fitting bar end mirror according to the size of the threading inside the grip (usually 7/8 inches but make sure to check yours first). Hope this helps.

• 
  @johnnieharris35704 ай бұрын

  I was building a SCOUT online and it wouldn't let me add the bar end mirror kit unless I added the mini apes...the newer SCOUTS don't need the kit.@@bobberbud

• 
  @navyshyts Жыл бұрын

  Looks way better, but I had to flip them to the regular look. I live in NYC a lot of stop and go and crazy non patient drivers. I just had to go with the safer route and forget about the looks for this lol.

• 
  @bobberbud Жыл бұрын

  I actually ended up doing the same 🤣because I couldn’t see much in the downward position

• 
  @user-ty6gz5ms9l Жыл бұрын

  Looks way better!

• 
  @marcusjeffreysmartwater Жыл бұрын

  ^

• 
  @eddie_salv5143 Жыл бұрын

  Nice video bro just got my scout bobber 60 yesterday and ordered this exhaust I’m sure it’s really loud but it’s the cheapest best sounding exhaust slip ons and it’s way better than have a mopad sound while riding before

• 
  @bobberbud Жыл бұрын

  Appreciate it. Yeah for only around $100 they can be a great option. A lot of people don’t mind or even like the loudness but for me it was too loud. If you feel the same way perhaps you could try putting 2 baffles in each slip on instead of one or zero. Hope you like them bro and ride safe 🤙🏻