Atomic, spectacular, impressive...🏆🏆 What airbrush do you use? Thank you
@kennettereyes98449 күн бұрын
Hi, i just want to ask. What paint color did you use for the front suspension. Thanks 😊
@Makeitscale9 күн бұрын
This is not painted as an option part.
@kennettereyes98449 күн бұрын
Ohh. I see. What paint color can you recommend for the front suspension? Hehe ✌🏻
@kennettereyes984410 күн бұрын
Hi, i just want to ask. What paint color did you use for the front suspension. Thanks 😊
@Music9178010 күн бұрын
Great job
@user-fk9wn7ct8v14 күн бұрын
額外的套件很花錢！
@dougiequick117 күн бұрын
Beautiful work too bad the cat kills the whole model for me personally just my own opinion (and that of MANY full scale R1 owners apparently) For a few pennies more in plastic they could have included an optional cat delete? THEN I might actually want to build one I have the dummed down MT-10 version of the motorcycle and damn I hate the OE cat! just a big ugly hunk of dead weight ....only reason i keep it as I have yet to find a good aftermarket option that is not ridiculously loud ....cause most riders apparently THINK they want a shorty can but they are obnoxiously loud on the pipe on any R1/MT-10/FZ-10 BTW would be awesome too if there were an SB1K version of the kit that eliminates street stuff and uses high end swing arm and suspension.....maybe with decal selection for various team schemes
It's hard to tell you because the place I live is different. We usually sell them on Amazon as well.
@RuweSaareАй бұрын
Wow, no underbody details at all :O
@biggsexy3969Ай бұрын
Beautiful
@Brockstar5150Ай бұрын
That is one fine piece of art that you’ve just built there Sir. I’m sure if you parked the real thing 50ft behind the model you wouldn’t know which one was which. Bravo👋
@jinxed539Ай бұрын
Fantastic work! The color was a perfect choice.
@beyoungheouneohАй бұрын
색칠전에 부품을 세척했나요!..?? 7:40
@MakeitscaleАй бұрын
밀리터리류는 세척을 열심히 하지 않습니다 ㅎㅎ
@beyoungheouneohАй бұрын
네 조립 후에 도색이라구요!..?? 0:50
@beyoungheouneohАй бұрын
전 이 과정을 보면서 꼭 하고 싶은게 1대 있어요! 1:07
@beyoungheouneohАй бұрын
바로 assult amphibious vehicle! 일명 상륙돌격장갑차! 인데 걔는 문제가 내부까지 조립 및 색칠을 해야 한다는 것입니다! 1:44
@MakeitscaleАй бұрын
결국 같은 색상을 칠하기에 최대한 조립 후 도색합니다.
@MakeitscaleАй бұрын
천천히 하면 다합니다. 머릿속으로 공수를 최대한 줄여 작업하면 편합니다.
@jayyoon7578Ай бұрын
같은 한국인인게 자랑스러움! 😊😊 볼때마다 감탄만 하고 갑니다! 👍👍 앞으로도 좋은 작품 많이 보여주세요~~~
@MakeitscaleАй бұрын
응원 감사합니다 😊
@janvanrenselaar5998Ай бұрын
More than wonderfull result. Got this still waiting to be build also in the Big Scale. Now building The 1-12 Kremer Porsche 934 from Tamiya and the Nissan GTR Nismo from Fujimi. Changed to big scale andthey are sooo nice to build.
@MakeitscaleАй бұрын
Unfortunately, the work has been suspended for a while. You make interesting products. That's cool.
@borgullet3376Ай бұрын
Bro you should be Working at Industrial Light & Magic
@MakeitscaleАй бұрын
That's the best compliment
@danrobak4475Ай бұрын
Great work! What type of clear yellow did you use for the head lights?
@MakeitscaleАй бұрын
It's just lacquer paint
@bookadsАй бұрын
How do you achieve such clear lines when u mask .. wow
@bookadsАй бұрын
Honestly, how do you do it LOL!?
@sir_hurkederp1048Ай бұрын
How do you make decals stick properly, i got a vial of revell decal soft but it doesnt seem to do anything when i put it on and i cant get them to wrap around edges or sit on inconsistant surface properly
@MakeitscaleАй бұрын
Use a dryer. Lightly use warm air.
@user-rn1zy3fz9vАй бұрын
역시 사이즈가 크면 꾸며줄 것도 많아서 좋더라고~^^
@user-rn1zy3fz9vАй бұрын
고라지, 자동차는 뭐니뭐니해도 엔진이 쵝오지^^
@user-rn1zy3fz9vАй бұрын
이라고 열씸히 했는디, 당분간 접겠다고야 ㅋㅋ 휴덕은 있어도 탈덕은 없어야 ㅋㅋㅋ
@user-oi4sj6wc1kАй бұрын
いろいろな発想で器用に制作しますね。 自分もこんな上手くできたら楽しいだろうなぁ
@josephlau8476Ай бұрын
I like model motorcycle very much.
@josephlau8476Ай бұрын
I like model motorcycle very much.
@cesagtimk7313Ай бұрын
awesome.
@cesagtimk7313Ай бұрын
Awesome build big bro!! What a beautiful car… very nice… can you tell me what’s the soundtrack at 11:12 ? Thanks mate, greetings
@matteopirone3099Ай бұрын
*splendid CONSTRUCTION. COMPLIMENTS*
@haroldquill8761Ай бұрын
Great modelling and painting. Thank you for your video.
@shillen652 ай бұрын
hi, it´s me again... That tamiya stand is a really handy tool! One more question: which nozzle-size does your airbrush have? With my small .3mm i use for Figurepainting it is very annoying to paint that big flat areas... ;-)
@Makeitscale2 ай бұрын
I also use 0.3mm gunpieces and 0.5mm gunpieces.
@alexanderkhan76212 ай бұрын
А как краску тамия вымывать с кисти, в растворитель окунать? Наверняка краска Tamiya не смывается водой.
@Makeitscale2 ай бұрын
Это краска, используйте Lacquer Thinner.
@Jean-yvesRabien2 ай бұрын
Avec tout ces détails moteur caché ! Y faudrait mettre les carénage a côté de la moto ! Magnifique
@Jeff-cv4qn2 ай бұрын
Perfection
@dougpersichitte17002 ай бұрын
Beautiful work. Why did you choose a black interior?
@sandragares11462 ай бұрын
I also have that model but even smaller
@kevinu60042 ай бұрын
I may be building one pretty soon.... great work, sure does look clean in the red & black 🔥👏
@TheMozerfok2 ай бұрын
what a fine colour...
@voodoonights16712 ай бұрын
Beautiful build.
@color63ch2 ай бұрын
Your video is very instructive. thanks for sharing👍👍
@modellbauatelier2 ай бұрын
It's the 3rd part of the Nissan. Please korrekt them.
@peponeslotproject87482 ай бұрын
Beau travail et beau montage. Merci pour le partage.
@shillen652 ай бұрын
Nice video. I have purchased that kit recently and prepare for building it… What is that tool that holds the body while spraying? Haven‘t seen that before but it‘s a must-have…
@Makeitscale2 ай бұрын
Tamiya Spray-work Painting Stand Set 입니다. If you don't have one, put double-sided tape on the glass bottle.
@user-tq8qe2zt1w2 ай бұрын
A very nice build and thanks for sharing your step by step building instructions. 👍
Пікірлер
Atomic, spectacular, impressive...🏆🏆 What airbrush do you use? Thank you
Hi, i just want to ask. What paint color did you use for the front suspension. Thanks 😊
This is not painted as an option part.
Ohh. I see. What paint color can you recommend for the front suspension? Hehe ✌🏻
Hi, i just want to ask. What paint color did you use for the front suspension. Thanks 😊
Great job
額外的套件很花錢！
Beautiful work too bad the cat kills the whole model for me personally just my own opinion (and that of MANY full scale R1 owners apparently) For a few pennies more in plastic they could have included an optional cat delete? THEN I might actually want to build one I have the dummed down MT-10 version of the motorcycle and damn I hate the OE cat! just a big ugly hunk of dead weight ....only reason i keep it as I have yet to find a good aftermarket option that is not ridiculously loud ....cause most riders apparently THINK they want a shorty can but they are obnoxiously loud on the pipe on any R1/MT-10/FZ-10 BTW would be awesome too if there were an SB1K version of the kit that eliminates street stuff and uses high end swing arm and suspension.....maybe with decal selection for various team schemes
Beautiful job
진짜로 이젠 그만 만들려고?
작업공구 경준이한테 넘겼어 ㅎㅎ
very good work on this club Porsche kit.
かっこいい！
Super práce - gratuluji.
Bonito montaje y resultado.
What is the link to the fenders?
cults3d.com/en/3d-model/various/datsun-nissan-240z-pandem-rocket-bunny-transkit-1-24-scale
Where i find the kit ?
It's hard to tell you because the place I live is different. We usually sell them on Amazon as well.
Wow, no underbody details at all :O
Beautiful
That is one fine piece of art that you’ve just built there Sir. I’m sure if you parked the real thing 50ft behind the model you wouldn’t know which one was which. Bravo👋
Fantastic work! The color was a perfect choice.
색칠전에 부품을 세척했나요!..?? 7:40
밀리터리류는 세척을 열심히 하지 않습니다 ㅎㅎ
네 조립 후에 도색이라구요!..?? 0:50
전 이 과정을 보면서 꼭 하고 싶은게 1대 있어요! 1:07
바로 assult amphibious vehicle! 일명 상륙돌격장갑차! 인데 걔는 문제가 내부까지 조립 및 색칠을 해야 한다는 것입니다! 1:44
결국 같은 색상을 칠하기에 최대한 조립 후 도색합니다.
천천히 하면 다합니다. 머릿속으로 공수를 최대한 줄여 작업하면 편합니다.
같은 한국인인게 자랑스러움! 😊😊 볼때마다 감탄만 하고 갑니다! 👍👍 앞으로도 좋은 작품 많이 보여주세요~~~
응원 감사합니다 😊
More than wonderfull result. Got this still waiting to be build also in the Big Scale. Now building The 1-12 Kremer Porsche 934 from Tamiya and the Nissan GTR Nismo from Fujimi. Changed to big scale andthey are sooo nice to build.
Unfortunately, the work has been suspended for a while. You make interesting products. That's cool.
Bro you should be Working at Industrial Light & Magic
That's the best compliment
Great work! What type of clear yellow did you use for the head lights?
It's just lacquer paint
How do you achieve such clear lines when u mask .. wow
Honestly, how do you do it LOL!?
How do you make decals stick properly, i got a vial of revell decal soft but it doesnt seem to do anything when i put it on and i cant get them to wrap around edges or sit on inconsistant surface properly
Use a dryer. Lightly use warm air.
역시 사이즈가 크면 꾸며줄 것도 많아서 좋더라고~^^
고라지, 자동차는 뭐니뭐니해도 엔진이 쵝오지^^
이라고 열씸히 했는디, 당분간 접겠다고야 ㅋㅋ 휴덕은 있어도 탈덕은 없어야 ㅋㅋㅋ
いろいろな発想で器用に制作しますね。 自分もこんな上手くできたら楽しいだろうなぁ
I like model motorcycle very much.
I like model motorcycle very much.
awesome.
Awesome build big bro!! What a beautiful car… very nice… can you tell me what’s the soundtrack at 11:12 ? Thanks mate, greetings
*splendid CONSTRUCTION. COMPLIMENTS*
Great modelling and painting. Thank you for your video.
hi, it´s me again... That tamiya stand is a really handy tool! One more question: which nozzle-size does your airbrush have? With my small .3mm i use for Figurepainting it is very annoying to paint that big flat areas... ;-)
I also use 0.3mm gunpieces and 0.5mm gunpieces.
А как краску тамия вымывать с кисти, в растворитель окунать? Наверняка краска Tamiya не смывается водой.
Это краска, используйте Lacquer Thinner.
Avec tout ces détails moteur caché ! Y faudrait mettre les carénage a côté de la moto ! Magnifique
Perfection
Beautiful work. Why did you choose a black interior?
I also have that model but even smaller
I may be building one pretty soon.... great work, sure does look clean in the red & black 🔥👏
what a fine colour...
Beautiful build.
Your video is very instructive. thanks for sharing👍👍
It's the 3rd part of the Nissan. Please korrekt them.
Beau travail et beau montage. Merci pour le partage.
Nice video. I have purchased that kit recently and prepare for building it… What is that tool that holds the body while spraying? Haven‘t seen that before but it‘s a must-have…
Tamiya Spray-work Painting Stand Set 입니다. If you don't have one, put double-sided tape on the glass bottle.
A very nice build and thanks for sharing your step by step building instructions. 👍