Was referred to this video for install on my mk5 I have no idea how went I don't have a pigtail coming off my headlight on the mk5
@kamauwilliams99517 ай бұрын
Thanks for the share. This video saved me a lot of headache.
@razerone497 ай бұрын
So do these blind other drivers like the dumbass’ cars who have HID’s in halogen housing lights? Without the cutoff or a projector housing headlight, I don’t see how these will magically cut to light the road and not blind oncoming traffic
@kuljitsinghchhina194310 ай бұрын
Very good helpful video
@rfunder Жыл бұрын
I’m sorry what???? You can’t “go back” and “restore settings” if you mess up. It’s purely settings for your cable. If you mess up in VCDS and store in the car’s system, it’s stored and there is no “restore settings”. You’ll have to find where you messed up and fix it yourself.
@michaelhernandez6281 Жыл бұрын
This video saves me from a disaster of a headache when my battery died and my door handle broke off hahaha
@charlesrosaly Жыл бұрын
Thank you for this instructional vid. Please post a link leading to the after market adapter.
@northernise Жыл бұрын
How to disable stop/start on seat leon mk2 1p?
@acksonmunthali593 Жыл бұрын
my infotainment system got stuck in a boot loop. It doesn't go beyond the WELCOME TO VW screen. Can this gadget fix that?
@ihategangstalkers3912 Жыл бұрын
The silent video was only to build up the magnitude of the one liner at the end.... and it worked!! Brilliantly done. I will come back to watch this, on every 3rd year... for nostalgic purposes
@josh8106 Жыл бұрын
Video starts at 8:00
@easternise Жыл бұрын
Very nicely explained tutorial!
@easternise Жыл бұрын
Can this do diagnostics and clear codes?
@easternise Жыл бұрын
Can you please send link to the cable and the software.
@arni4750 Жыл бұрын
you’re DRL’s can be turned off with pulling the E-brake in Park. don’t know about manuals.
@69thedrummer Жыл бұрын
I plan to run this kit in my 2013 Mercedes C300 as it also has the same stock H7 halogen setup. Thoughts?
@touaregkc2 жыл бұрын
A clean explanation, thank you.
@ellemarta2 жыл бұрын
Hi nice video I brought some katur led headlight for my vauxhall insignia 2011 .. when I fitted the led headlight, with the same adapter what you show in the video.. the led headlight doesnt fit properly it's a little bit loose .. I put some rubber gasket to make little bit better....does any black electrician tape is good to putting on back of the adapter headlight to make sure the led don't get looser I hope you understand what I mean thank you ..
@pigloverme2 жыл бұрын
Can i disable ALL warning chimes
@geriatricginger2 жыл бұрын
Options/Test does 'not' back up your files, as you stated @7:30. It saved the OBD2 connection and interface is all. Also, folks, keep in mind that this was 5 yrs ago, and VCDS is now on v23.3 (as of today) and a lot of these functions he's doing are more intuitively named, and the door ding is a separate thing (depending on the model/yr)
@boroboro82782 жыл бұрын
Any update?
@LaffyLewComedy2 жыл бұрын
Thank you. Lol
@hardcore44762 жыл бұрын
Volkswagens have the most complicated headlight setup I’ve ever experienced!! They add to much for so little..
@hardcore44762 жыл бұрын
This is the best example I’ve seen on KZread so far!! Quick question if I may? I ordered some Anyhow LED’s from eBay and wondering if I could use my original light bracket for them? They didn’t mention any other bracket so I’m kinda wondering about that now. Guess I can fish around and see if it would work. Thanks!
@scottfrederick88032 жыл бұрын
I'll just bought a 2009 R6S I did not know I could do that
@andrewmatthee24082 жыл бұрын
Great video. Thank you. Do you know how to activate app connect and mirrorlink on MIB2 infotainment system?
@cydls688fatech72 жыл бұрын
Man! You are the most amazing video tutorial I found,, the best, very detail very clear, Amazing! Please keep making videos VCDS tutorial for us! Thank you 🙏
@gamingwithjp67692 жыл бұрын
Quick question why did you put it at 14 does it affect if you put it lower?
@xxhypedupxx83362 жыл бұрын
I cannot get everything to fit. i even took the whole headlight assembly out and it still wouldnt fit.
@rossbud2472 жыл бұрын
You can't roll up hill lol
@moisesg17973 жыл бұрын
will a vcds lite work on a 2009 jetta and to program an abs module
@tdimac3 жыл бұрын
My only issue with DRL’s is some vehicles don’t bring the rear lights on when in DRL mode. Because dashboards are so well illuminated these days, people assume their lights are on and in adverse conditions or bad light the fact they have front lights only only is about as much use as a chocolate teapot. People forget to turn lights on so why not just forget about sidelights and have DRL’s that have the rear lights on as well and then main headlights when required. Volvo preempted DRL’s by decades by just having their lights on sidelights permanently until main headlights were required. There was no option for no lights, this was the subject of much derision at the time but it’s now considered the safe thing to do. Nice video.
@cglim10903 жыл бұрын
Hi~ Excellent. I want to know how to code the side mirror folding when starting on and off. Keep it up the great work !
@Cstruct_3 жыл бұрын
oh I have a clock ? well :D
@jp450r3 жыл бұрын
I have mine connected the same way other than the hose going to the front.
@SayWhaaaaaaaaaaaaaaaaaaaaaaat3 жыл бұрын
You dont have to hold key to close or open windows..it's enought to only activate it and then release
@ammarhussein9453 жыл бұрын
Hi. I installed this program on my Windows 10 computer, but the computer did not recognize the connection at all. What should I do?
@Mr-8763 жыл бұрын
Is there anyway to access that from the front
@decrodedart26883 жыл бұрын
oi bro this video is perfect thanks you for the zero bs. fucking mazda lmao
@umermalik19973 жыл бұрын
Thanks for the video. I just got my first 2019 R6 and was struggling setting the clock. Much appreciated 🙏
@firstnamelastname7763 жыл бұрын
i have a 2021 jetta gli autobahn, i have obd adapter (carista-if your familiar with that at all) it does not give me the option for lane change which the default is set to 3, can this be changed to 5 ? thru the vcds ?
@LUCIDxGHOST323 жыл бұрын
Helpful
@mustafaalramahy16313 жыл бұрын
Does it fit for vw polo 2008 car?
@ady25speed3 жыл бұрын
you dont need to change the VCI interface if you want more VIN's you just upgrade your current VCI to enthusiast - 10 VIN or Proffesional - Unlimited 👍 i own the Hex Net Proffesional btw 👍
@valdeze3 жыл бұрын
Are these 6000k?
@spacemansabs3 жыл бұрын
The dinging isn’t so you remember your door is open, it’s to remind you your key is still in the ignition or that you left your lights on, so you don’t lock yourself out of your car, or so that you don’t leave your key in the car and have someone drive away with it.
@eonr2499 Жыл бұрын
So if you’re stupid you need the door ding right? Lol
@bobmizoski96693 жыл бұрын
How the hell is the interface better then obd11?? That looks so confusing
Пікірлер
How come u dont make videos anymore?
This is a really good video 😊
Was referred to this video for install on my mk5 I have no idea how went I don't have a pigtail coming off my headlight on the mk5
Thanks for the share. This video saved me a lot of headache.
So do these blind other drivers like the dumbass’ cars who have HID’s in halogen housing lights? Without the cutoff or a projector housing headlight, I don’t see how these will magically cut to light the road and not blind oncoming traffic
Very good helpful video
I’m sorry what???? You can’t “go back” and “restore settings” if you mess up. It’s purely settings for your cable. If you mess up in VCDS and store in the car’s system, it’s stored and there is no “restore settings”. You’ll have to find where you messed up and fix it yourself.
This video saves me from a disaster of a headache when my battery died and my door handle broke off hahaha
Thank you for this instructional vid. Please post a link leading to the after market adapter.
How to disable stop/start on seat leon mk2 1p?
my infotainment system got stuck in a boot loop. It doesn't go beyond the WELCOME TO VW screen. Can this gadget fix that?
The silent video was only to build up the magnitude of the one liner at the end.... and it worked!! Brilliantly done. I will come back to watch this, on every 3rd year... for nostalgic purposes
Video starts at 8:00
Very nicely explained tutorial!
Can this do diagnostics and clear codes?
Can you please send link to the cable and the software.
you’re DRL’s can be turned off with pulling the E-brake in Park. don’t know about manuals.
I plan to run this kit in my 2013 Mercedes C300 as it also has the same stock H7 halogen setup. Thoughts?
A clean explanation, thank you.
Hi nice video I brought some katur led headlight for my vauxhall insignia 2011 .. when I fitted the led headlight, with the same adapter what you show in the video.. the led headlight doesnt fit properly it's a little bit loose .. I put some rubber gasket to make little bit better....does any black electrician tape is good to putting on back of the adapter headlight to make sure the led don't get looser I hope you understand what I mean thank you ..
Can i disable ALL warning chimes
Options/Test does 'not' back up your files, as you stated @7:30. It saved the OBD2 connection and interface is all. Also, folks, keep in mind that this was 5 yrs ago, and VCDS is now on v23.3 (as of today) and a lot of these functions he's doing are more intuitively named, and the door ding is a separate thing (depending on the model/yr)
Any update?
Thank you. Lol
Volkswagens have the most complicated headlight setup I’ve ever experienced!! They add to much for so little..
This is the best example I’ve seen on KZread so far!! Quick question if I may? I ordered some Anyhow LED’s from eBay and wondering if I could use my original light bracket for them? They didn’t mention any other bracket so I’m kinda wondering about that now. Guess I can fish around and see if it would work. Thanks!
I'll just bought a 2009 R6S I did not know I could do that
Great video. Thank you. Do you know how to activate app connect and mirrorlink on MIB2 infotainment system?
Man! You are the most amazing video tutorial I found,, the best, very detail very clear, Amazing! Please keep making videos VCDS tutorial for us! Thank you 🙏
Quick question why did you put it at 14 does it affect if you put it lower?
I cannot get everything to fit. i even took the whole headlight assembly out and it still wouldnt fit.
You can't roll up hill lol
will a vcds lite work on a 2009 jetta and to program an abs module
My only issue with DRL’s is some vehicles don’t bring the rear lights on when in DRL mode. Because dashboards are so well illuminated these days, people assume their lights are on and in adverse conditions or bad light the fact they have front lights only only is about as much use as a chocolate teapot. People forget to turn lights on so why not just forget about sidelights and have DRL’s that have the rear lights on as well and then main headlights when required. Volvo preempted DRL’s by decades by just having their lights on sidelights permanently until main headlights were required. There was no option for no lights, this was the subject of much derision at the time but it’s now considered the safe thing to do. Nice video.
Hi~ Excellent. I want to know how to code the side mirror folding when starting on and off. Keep it up the great work !
oh I have a clock ? well :D
I have mine connected the same way other than the hose going to the front.
You dont have to hold key to close or open windows..it's enought to only activate it and then release
Hi. I installed this program on my Windows 10 computer, but the computer did not recognize the connection at all. What should I do?
Is there anyway to access that from the front
oi bro this video is perfect thanks you for the zero bs. fucking mazda lmao
Thanks for the video. I just got my first 2019 R6 and was struggling setting the clock. Much appreciated 🙏
i have a 2021 jetta gli autobahn, i have obd adapter (carista-if your familiar with that at all) it does not give me the option for lane change which the default is set to 3, can this be changed to 5 ? thru the vcds ?
Helpful
Does it fit for vw polo 2008 car?
you dont need to change the VCI interface if you want more VIN's you just upgrade your current VCI to enthusiast - 10 VIN or Proffesional - Unlimited 👍 i own the Hex Net Proffesional btw 👍
Are these 6000k?
The dinging isn’t so you remember your door is open, it’s to remind you your key is still in the ignition or that you left your lights on, so you don’t lock yourself out of your car, or so that you don’t leave your key in the car and have someone drive away with it.
So if you’re stupid you need the door ding right? Lol
How the hell is the interface better then obd11?? That looks so confusing
less talking and more doing.