Welcome to our channel. While you're here take a look around. You will find videos all about the automotive industry. Anything from tooling reviews to how-to's.
I've been using a sealed beam light for decades. My shop foreman convinced me a test light is adequate as long as it's not LED. I found out this week that it is NOT adequate when looking at a bad relay. I put two supercharger coolant pumps on with same results until I went back to my sealed beam. It would light up my test light, not the sealed beam. Quite a few choice words fer that one lol
@robertmobileman8304Күн бұрын
Cool , I doubt you will deliver to UK thou ?
@eumeeka1Күн бұрын
Outstanding!!!!
@vincentmeadows19052 күн бұрын
Is it possible to have the overlays or piston chart on the snapons?
@phazerboy3 күн бұрын
Fastest way to find a short is put power to the circuit and look for smoke.😬
@grassroot11004 күн бұрын
We were taught to do a half split on the circuitry to simplify the job. Basic trouble shooting here. And hint to save fuses while doing it, haa Good work, thanks.
@mikedavidson21175 күн бұрын
Hi are you thinking of making a mount kit for the mic sig oscilloscope
@JarheadDiagnostics5 күн бұрын
Hello, which one? The Micsigs are typically all in one units.
@mikedavidson21174 күн бұрын
The Sato 1004
@robertmobileman83045 күн бұрын
nice one , to you send to the UK ? are you still doing a demo on the topdon scope anytime ? thanks
@JarheadDiagnostics5 күн бұрын
Hello! We ship world wide. And we use the Topdon scope. It’s a great scope for the price.
@mylifeisdope9165 күн бұрын
awesome! very simple once you lay it out like that. thank you, much appreciated
@CAMCAM4135 күн бұрын
I’m really liking the claymore mount, if only I had an oscilloscope 😬
@topcat59886 күн бұрын
I do the same things… Then I buy all this stuff to protect my investments and it sits in my desk, in the way….
@greghillmusic9 күн бұрын
Cool video. The kinda thing that's outta reach from my brain.
@vicpetrishak77059 күн бұрын
General Technology Corporation manufactures a 5 piece fuse socket connector kit . GTC063 . Quality Made in Canada , purchased on Amazon $22.00 The connectors work well !
@untitleduser66610 күн бұрын
I've used the same method of using a test light to diagnose a constant short to ground, very effective. Once the test light is in place I've used a DC current-clamp to identify how far the short is traveling in the circuit. If I see the 5A (or however much my test light is drawing) on a given part of the circuit I know the short is further down the line, if I see 0A I know I'm past it.
@TimGoff-rl5fy15 күн бұрын
How do you enter the giveaway
@JarheadDiagnostics15 күн бұрын
Every $5 you spend on our website gives you an entrance. Also there is a no purchase necessary as well, info for that is on our site.
@christopherbean-dp8hn14 күн бұрын
I guess that info isn’t important lol
@JarheadDiagnostics14 күн бұрын
Subscribe to my channel and you’ll see other videos about it. 😉
@1971anaconda13 күн бұрын
Dose that include Australia
@rscelectrical709115 күн бұрын
Great clear video, been using the same method for years and it works like a dream.
@Oldceltic-vy4ev15 күн бұрын
I wonder if Weird Al knows that someone stole his song.
@KERTER2116 күн бұрын
Thank you
@nickayivor843216 күн бұрын
👌
@judih.875419 күн бұрын
Yes!
@geoepi32197519 күн бұрын
Hi can I use a manifold absolute pressure sensor from a car as a pressure transducer, ?
@JarheadDiagnostics19 күн бұрын
With an oscilloscope, you can use it as a delta style sensor. But as a transducer, technically yes, if you know the voltage scale. And it would only be for low psi reading. You could not use it as an in cylinder transducer.
@geoepi32197519 күн бұрын
@@JarheadDiagnostics thanks for reply, i want to capture the intake vacuum waveform, from a single cylinder scooter, because i can't Interpret the vacuum gauge reading cause it's bouncing around , and i want to verify timing is this possible that way, thanks for your time
@user-nf8gs3or9q20 күн бұрын
Ummmmm, maybe you should be working instead of putting this useless video out. You just wasted 9:51 minutes of my time😮
@JarheadDiagnostics20 күн бұрын
I appreciate this kind comment. I want to thank you for assisting in the videos analytics. Have a wonderful day.
@TheMasterHackUS20 күн бұрын
I need a diag cart
@JarheadDiagnostics20 күн бұрын
We're giving one away! Head over to our website for information. www.jarheaddiag.com
@dafuq216521 күн бұрын
you have a light bulb but what other diagnostic equipment is used to connect the fuse circuit to like light bulb looks like a fuse buddy what is the connection going on to light the bulb
@carburetedcowboy428821 күн бұрын
Amazing work! I need to get multiple products for my shop! Thanks for creating amazing products for technicians!
@jorgevillanueva220221 күн бұрын
I'm having the same issue with the same veichle.
@nwadeswim22 күн бұрын
Couldn't agree more. A fellow tech looked in my diagnostic door and asked if having everything organized in separate bins made any real difference....I told him he should try it
@markhubanks371527 күн бұрын
Great information and video.Thank You!
@trainman120928 күн бұрын
The worst video I've ever seen. Your voice doesn't come through very well. The diagram is too far away. You talk too fast. Watch your own videos. Use a script, if possible. Then critique your self, see if it seems passable. I was through before 1/3 of this video played. One other guy said you're awesome. You did a great job. You must have done something really nice for him, cause I think it's annoying mumbling. I'm also sorry I told you this, cause I don't want to hurt your feelings. Just review your videos before you publish them. I wish you great success in the future. You had a lot going on down on the carpet floor of that vehicle. Best wishes, friend.
@JarheadDiagnostics28 күн бұрын
Thank you for the very kind words.
@reconforsales770828 күн бұрын
hi i have RCM2_a350 code on my tesla model 3 Up-Front Left Impact Sensor (shotgun)-short to Ground
@chrisboyd603229 күн бұрын
99 % of people out there trying to diy didn't understand what you were saying. Not enough detail
@markclough900029 күн бұрын
Try putting it on a steering wheel works great
@JarheadDiagnostics29 күн бұрын
True, but you’re not always using the scan tool inside the vehicle.
@AR-il9gk29 күн бұрын
Nice!!!
@JarheadDiagnostics29 күн бұрын
Thank you.
@BurtonDynamicsАй бұрын
Not understanding what your touching with pin 7. Ground? 12v?
@pedrodellago5054Ай бұрын
Thanks for the video. Quick question. I am getting started with a Pico scope. I am going to buy a laptop. Would you recommend a touch screen? Is it going to be easier than a regular screen? Thanks for your time.
@megaman4201Ай бұрын
Need the harbor freight magnetic coffee cup holder, works very well, eventually that coffee will get knocked over and that's a mess to clean out
@JimmyLewterАй бұрын
Okay 1999 Nissan Altima the right side of the fuse box to fuse box in the engine compartment where all the links are at is inoperable The inside of the car there's like two rows that are working and two out of five rows that are working how do I find that short or that I'm sure that it's probably just what he said but I have a hard time comprehending the electrical stuff so can somebody help me out please please please this is killing me
@keithmoore2094Ай бұрын
We're to buy those tool it good way find short to ground
@NeighborhoodChamberАй бұрын
Hmm Could have been a great video. It's not because Branden keeps using the word "it" throughout the video which the listener can nit track (the problem isn't the speed if speech - he has perfect diction). However - addedto his being lazy and using the indefinite article "it" in place of saying the proper name of what he is refering to. I'd say Branden is a genious if he stops this lazy work product destroying "saying it" habit.. KNOW THAT at the beginning if the demonstration- where Branden explains the wiring diagrams indication of where the circuit goes Branden refers to the 3rd connecter "C3” and indicates locations if connectors 1,2 and 3 and says C3 is behind "it" - Branden is refering to ”the fuse box" when Branden states "C3 us behind (it). Branden also fails to clarify that the test lights Branden offers for sale at the end if the video are essentially a tiny positive and negative wire with tiny wire clamps that you can attach in tiny spaces (these little clamps and wires are attached to a light that will go on if attached to a (complete circuit aka a circuit with continuity). Ok - I am just finally beginning to comprehend electrucal circuit testing - what I have written here is my attempt to repeat what I think Branden is teaching us. Please reply to me if I got what the Brilliant Branden is saying - Thank you! 🥂
@NeighborhoodChamberАй бұрын
❤
@MFEeeeАй бұрын
Good stuff.
@kaden_G1a1seАй бұрын
Bro I did the same thing to mine
@worlddavesАй бұрын
It's a grommet right?
@RandallColvin24-7Ай бұрын
Epoxy and some washers...... Smh mechanics😂😂
@ramdodgetruckАй бұрын
Since they changed the heater core which caused the problem, I'd look around there first.
@nuklhed6Ай бұрын
The case holding your MDI2 is it on the door latch?
@JarheadDiagnosticsАй бұрын
It’s something we make. It’s on our website. www.jarheaddiag.com
@brandonbetts1101Ай бұрын
Yo bro I got a 95 gmc sierra k1500 and the gas gauge started acting crazy sporadic so I replaced the fuel pump now the gauge just stays on empty! Don't work at all? Any clues or idea's?
@joshmaloney2169Ай бұрын
Hell yeah would be interested, tools like this aren't readily available in Australia, have to bulk order from AESwave and you with mates to buy stuff
@exfilingАй бұрын
and you only had to take out a 20k loan for the whole setup!
Пікірлер
I've been using a sealed beam light for decades. My shop foreman convinced me a test light is adequate as long as it's not LED. I found out this week that it is NOT adequate when looking at a bad relay. I put two supercharger coolant pumps on with same results until I went back to my sealed beam. It would light up my test light, not the sealed beam. Quite a few choice words fer that one lol
Cool , I doubt you will deliver to UK thou ?
Outstanding!!!!
Is it possible to have the overlays or piston chart on the snapons?
Fastest way to find a short is put power to the circuit and look for smoke.😬
We were taught to do a half split on the circuitry to simplify the job. Basic trouble shooting here. And hint to save fuses while doing it, haa Good work, thanks.
Hi are you thinking of making a mount kit for the mic sig oscilloscope
Hello, which one? The Micsigs are typically all in one units.
The Sato 1004
nice one , to you send to the UK ? are you still doing a demo on the topdon scope anytime ? thanks
Hello! We ship world wide. And we use the Topdon scope. It’s a great scope for the price.
awesome! very simple once you lay it out like that. thank you, much appreciated
I’m really liking the claymore mount, if only I had an oscilloscope 😬
I do the same things… Then I buy all this stuff to protect my investments and it sits in my desk, in the way….
Cool video. The kinda thing that's outta reach from my brain.
General Technology Corporation manufactures a 5 piece fuse socket connector kit . GTC063 . Quality Made in Canada , purchased on Amazon $22.00 The connectors work well !
I've used the same method of using a test light to diagnose a constant short to ground, very effective. Once the test light is in place I've used a DC current-clamp to identify how far the short is traveling in the circuit. If I see the 5A (or however much my test light is drawing) on a given part of the circuit I know the short is further down the line, if I see 0A I know I'm past it.
How do you enter the giveaway
Every $5 you spend on our website gives you an entrance. Also there is a no purchase necessary as well, info for that is on our site.
I guess that info isn’t important lol
Subscribe to my channel and you’ll see other videos about it. 😉
Dose that include Australia
Great clear video, been using the same method for years and it works like a dream.
I wonder if Weird Al knows that someone stole his song.
Thank you
👌
Yes!
Hi can I use a manifold absolute pressure sensor from a car as a pressure transducer, ?
With an oscilloscope, you can use it as a delta style sensor. But as a transducer, technically yes, if you know the voltage scale. And it would only be for low psi reading. You could not use it as an in cylinder transducer.
@@JarheadDiagnostics thanks for reply, i want to capture the intake vacuum waveform, from a single cylinder scooter, because i can't Interpret the vacuum gauge reading cause it's bouncing around , and i want to verify timing is this possible that way, thanks for your time
Ummmmm, maybe you should be working instead of putting this useless video out. You just wasted 9:51 minutes of my time😮
I appreciate this kind comment. I want to thank you for assisting in the videos analytics. Have a wonderful day.
I need a diag cart
We're giving one away! Head over to our website for information. www.jarheaddiag.com
you have a light bulb but what other diagnostic equipment is used to connect the fuse circuit to like light bulb looks like a fuse buddy what is the connection going on to light the bulb
Amazing work! I need to get multiple products for my shop! Thanks for creating amazing products for technicians!
I'm having the same issue with the same veichle.
Couldn't agree more. A fellow tech looked in my diagnostic door and asked if having everything organized in separate bins made any real difference....I told him he should try it
Great information and video.Thank You!
The worst video I've ever seen. Your voice doesn't come through very well. The diagram is too far away. You talk too fast. Watch your own videos. Use a script, if possible. Then critique your self, see if it seems passable. I was through before 1/3 of this video played. One other guy said you're awesome. You did a great job. You must have done something really nice for him, cause I think it's annoying mumbling. I'm also sorry I told you this, cause I don't want to hurt your feelings. Just review your videos before you publish them. I wish you great success in the future. You had a lot going on down on the carpet floor of that vehicle. Best wishes, friend.
Thank you for the very kind words.
hi i have RCM2_a350 code on my tesla model 3 Up-Front Left Impact Sensor (shotgun)-short to Ground
99 % of people out there trying to diy didn't understand what you were saying. Not enough detail
Try putting it on a steering wheel works great
True, but you’re not always using the scan tool inside the vehicle.
Nice!!!
Thank you.
Not understanding what your touching with pin 7. Ground? 12v?
Thanks for the video. Quick question. I am getting started with a Pico scope. I am going to buy a laptop. Would you recommend a touch screen? Is it going to be easier than a regular screen? Thanks for your time.
Need the harbor freight magnetic coffee cup holder, works very well, eventually that coffee will get knocked over and that's a mess to clean out
Okay 1999 Nissan Altima the right side of the fuse box to fuse box in the engine compartment where all the links are at is inoperable The inside of the car there's like two rows that are working and two out of five rows that are working how do I find that short or that I'm sure that it's probably just what he said but I have a hard time comprehending the electrical stuff so can somebody help me out please please please this is killing me
We're to buy those tool it good way find short to ground
Hmm Could have been a great video. It's not because Branden keeps using the word "it" throughout the video which the listener can nit track (the problem isn't the speed if speech - he has perfect diction). However - addedto his being lazy and using the indefinite article "it" in place of saying the proper name of what he is refering to. I'd say Branden is a genious if he stops this lazy work product destroying "saying it" habit.. KNOW THAT at the beginning if the demonstration- where Branden explains the wiring diagrams indication of where the circuit goes Branden refers to the 3rd connecter "C3” and indicates locations if connectors 1,2 and 3 and says C3 is behind "it" - Branden is refering to ”the fuse box" when Branden states "C3 us behind (it). Branden also fails to clarify that the test lights Branden offers for sale at the end if the video are essentially a tiny positive and negative wire with tiny wire clamps that you can attach in tiny spaces (these little clamps and wires are attached to a light that will go on if attached to a (complete circuit aka a circuit with continuity). Ok - I am just finally beginning to comprehend electrucal circuit testing - what I have written here is my attempt to repeat what I think Branden is teaching us. Please reply to me if I got what the Brilliant Branden is saying - Thank you! 🥂
❤
Good stuff.
Bro I did the same thing to mine
It's a grommet right?
Epoxy and some washers...... Smh mechanics😂😂
Since they changed the heater core which caused the problem, I'd look around there first.
The case holding your MDI2 is it on the door latch?
It’s something we make. It’s on our website. www.jarheaddiag.com
Yo bro I got a 95 gmc sierra k1500 and the gas gauge started acting crazy sporadic so I replaced the fuel pump now the gauge just stays on empty! Don't work at all? Any clues or idea's?
Hell yeah would be interested, tools like this aren't readily available in Australia, have to bulk order from AESwave and you with mates to buy stuff
and you only had to take out a 20k loan for the whole setup!