Пікірлер

• 
  @pijeter5 күн бұрын

  How did you menage to put the pipe on the lift at 0:46, is it some kind of mod?

• 
  @General_NotTaha10 күн бұрын

  First like...

• 
  @master228games18 күн бұрын

  doesnt work for me. is it fixed? controllers works if they are separate from the ground. engines doesnt work at all.

• 
  @soundowl265018 күн бұрын

  Hwy I am messing with this right now and it’s not fixed. I had a similar problem. If you hook an engine to both bearing it should work. If it doesn’t try swapping the direction of the bearings. Mine is always swap the direction of the front bearing facing your load

• 
  @master228games18 күн бұрын

  @@soundowl2650 ill try this ty

• 
  @_Dynamation_8 күн бұрын

  you have to connect the bearings while the creation is off the lift.

• 
  @_Dynamation_8 күн бұрын

  the bearings also have to be counter rotating

• 
  @master228games8 күн бұрын

  @@_Dynamation_ thank you man

• 
  @KurNorock19 күн бұрын

  You can't run this very fast without it flipping the entire creation all over the place.

• 
  @_Dynamation_8 күн бұрын

  you need to balance the joint to go fast, i have it on one of my cars and i can go as fast as the engine allows me

• 
  @KurNorock8 күн бұрын

  @_Dynamation_ yeah i already tried that. Didn't work.

• 
  @starnolan5423Ай бұрын

  I don't clearly see the difference? if someone would like to explain to me

• 
  @chadwagner5362Ай бұрын

  It won't let me highlight the second bearing no matter what angle I look at it. Is there a trick to that?

• 
  @master228games5 күн бұрын

  rotate your whole creation

• 
  @Romani_FloppeАй бұрын

  so i tried it in survival and it wase sliping

• 
  @_Dynamation_8 күн бұрын

  i just realized that survival runs on simple 8 physics, idk why but it breaks the whole joint. sorry

• 
  @Taha-yx9ugАй бұрын

  comment

• 
  @DANIILPIAYАй бұрын

  колдун ебучий👍

• 
  @NotMyAccountАй бұрын

  There is a problem. It wont load the blueprint after I save it. Joint invalid or something

• 
  @Nefrea2 ай бұрын

  You just need bearings on both ends of the suspension and it wont male a glitch. Youre not allowing it to rotate where it needs to on the bottom

• 
  @Scrapanator.2 ай бұрын

  "the greatest technician that ever lived" reference

• 
  @diam_bai2 ай бұрын

  please, can you make a tutorial of piston engine at the end of the video???

• 
  @_Dynamation_8 күн бұрын

  already have

• 
  @shoresy69272 ай бұрын

  I don't consider it noob or lazy its just practical and best for multiplayer

• 
  @desenter2 ай бұрын

  tysm best channel about scrap mechanic❤

• 
  @MarcusGrundevik2 ай бұрын

  Cool, But bearing laggy af

• 
  @metoo111122 ай бұрын

  Wonderful tutorial. More, please!

• 
  @majorpropane2 ай бұрын

  i understood the greatest mechanic that ever lived reference

• 
  @bypavelcoc29513 ай бұрын

  Чувак, ты офигенно хорош, теперь я хочу применить это, хорошая работа!

• 
  @Cherno_N3 ай бұрын

  I'm Russian, and I notice once again that most of the useful information stored in English. I can only praise the author, it’s wonderful!

• 
  @General_NotTaha3 ай бұрын

  Nice one! Keep it up 👍

• 
  @Deniz695673 ай бұрын

  Isn't this gonna deteriorate in survival? In my perspective, survival is a mix of simple 8 and advanced physics and this 90 u-joint adds more joints, it's definitely going to cause quite some trouble, lol

• 
  @_Dynamation_3 ай бұрын

  well yes, but i really hated that the pipes would phase through each other so i came up with the is amalgamation lol. it’s not the best, but it could be better

• 
  @liron4ik_613 ай бұрын

  Name mods please

• 
  @_Dynamation_3 ай бұрын

  Block and Part editor by Ben Bingo

• 
  @liron4ik_612 ай бұрын

  @@_Dynamation_ thanks

• 
  @ShawnF6FHellcat3 ай бұрын

  How it works is so simple, yet it still makes me go "WTF is this?!" every time I see it.

• 
  @-aid40843 ай бұрын

  I like it's simplicity, though I want to do some experiments and test the max speed and torque it can handle, before trying to make my own and beat it. I'll update you if I find anything stronger, I look forward to experimenting. usually 90 degree pipe joints are pretty weak, since they just clip right through. but with that it's going to take enough force to make the bearings stretch.

• 
  @-aid40843 ай бұрын

  alright, so I spent like the whole time experimenting with testing gears and u-joints, I found out that this particular set up will fail at 2500 torque, and by that I mean the mechanism collapses in on itself. I built a slightly larger one(by a block each axis) so that I could get the missing bearing in place for the u-joint, and then it wouldn't rotate so I needed an extra four bearings on the center part that rotates, and that allowed it to pull all the way to 6000, where it once again failed. I then just tried using 8 tooth gears, and they produced the most amount of load, probably close to ten times as much. that surprised me, I guess the bearings are the limitation here. I also tried adding four bearings to the center part of your one and it made it worse, so I wonder if there's a way to get mine to rotate without those center bearings, because I do think they were sapping away some torque. I'm gonna go to bed now.

• 
  @raffizmc3 ай бұрын

  Very good, there isn't much content in this game, but I would like more...

• 
  @raffizmc3 ай бұрын

  Muito bom, não tem muito conteudo desse game, mas gostaria de mais...

• 
  @outandabout2593 ай бұрын

  do I remember you just joining scrap mechanic technical community? If so, I'll subscribe because I want to help spread real knowledge about mechanical stuff!

• 
  @_Dynamation_3 ай бұрын

  yes, i just joined the community. Thanks!

• 
  @toshik62293 ай бұрын

  Hello Dynamation, i’d like to see you build the smallest piston engine you can. My best is 3x3x1 2 piston engine. I used blueprint editing and it works on timers but it can even switch directions

• 
  @Felip3Prado3 ай бұрын

  I really needed a tutorial like this, I really like the game but not knowing the mechanics makes me rack my brains. Thanks

• 
  @zikra17783 ай бұрын

  OMG THIS IS SO USEFUL THANK YOU SO MUCH FOR SHARING THIS

• 
  @Taha-yx9ug3 ай бұрын

  comment for support

• 
  @xi91883 ай бұрын

  like if i ever get scrap mechanic

• 
  @justinpatterson52913 ай бұрын

  So, its basically enhanced double wishbone suspension?

• 
  @_Dynamation_3 ай бұрын

  kinda, but it really only helps with bottoming out

• 
  @anatnasogaming3 ай бұрын

  Could you make an explosive-launcher that has multiple magazines and can automatically reload by swapping between magazines?

• 
  @pixelsort3 ай бұрын

  Ooh, tank steering! Thanks. Btw, the blueprint edits, suspicious piston sorcery that can lag out your game, creative insanity involving screws and pipes and off-and-on the lift doing 3D rotations to complete these dastardly machinations, and all that are great. Will never try, but keep 'em coming! Swing bar and the cantilever suspension videos were pure genius.

• 
  @retodera95933 ай бұрын

  you have IIISI wallpaper... i got IIISI monitor this new year) 100 Hz is cool

• 
  @_Dynamation_3 ай бұрын

  nice, mines a 144Hz monitor

• 
  @iitzwingman2243 ай бұрын

  Zamn lil bro

• 
  @odytune3 ай бұрын

  Doing good with the videos, keep it up! 😘🥰

• 
  @General_NotTaha3 ай бұрын

  My dude.... That is nothing like a tank.

• 
  @_Dynamation_3 ай бұрын

  it has tank steering

• 
  @General_NotTaha3 ай бұрын

  @@_Dynamation_ but doesn't look like a tank

• 
  @ShawnF6FHellcat3 ай бұрын

  FINALLY, SOMEONE MADE A TUTORIAL!!! I've wanted to know how to make these for a while, but no one had a video on how they were made, just showcases, so thank you for stepping up! My question now is why this works... hmmm...

• 
  @_Dynamation_3 ай бұрын

  this works because there are two bearings counter rotating, to then the controller is a angle limiter. and on the electric engine the bearings are also counter rotating but there's a parent and child problem going on that makes it as though its a free spinning bearing until you turn the engine off. you can also do this with a gas engine.

• 
  @ShawnF6FHellcat3 ай бұрын

  @@_Dynamation_ So if I'm understand you right, then the electric engine allowing the bearing to free spin is the game not knowing which part is actually attached, so it either free spins or stays rigid with on or off signals; and the controller does the same thing, but it stops at the set angle instead of free spinning continuously?

• 
  @_Dynamation_3 ай бұрын

  @@ShawnF6FHellcat no, not really. how the game works is it thinks the left pipe is the parent of the pipe on the right, but the pipe on the right is also parented to the one on the left, if you separate the two and have one bearing on one pipe on opposing sides, you'll see what's happening. the game thinks they are parented and childed to each other. separate the two bearings so there's on bearing on either side and and place blocks on them on a platform and you'll see that with a controller it limits the angles and with the electric engine it dree spins. ps. i don't really know how to describe how do things in text but i hope you understood what i mean.

• 
  @ShawnF6FHellcat3 ай бұрын

  @@_Dynamation_ I understand what you're saying, but I'm just having a hard time visualizing it without going into the game and testing it. You're description is fine, it's my lack of the technical knowledge that's causing confusion, which just means I need to spend some time in Scrap Mechanic. Thank you for explaining the concept to though, not many people go beyond just a tutorial, so I appreciate it!

• 
  @shoresy69273 ай бұрын

  Sweet! Im totally going to try this out!

• 
  @smortime63173 ай бұрын

  Liked the video, pretty sure I'll use this in my survival world. Thanks

• 
  @anatnasogaming3 ай бұрын

  can you upload the "anti swing bar" to the workshop?

• 
  @_Dynamation_3 ай бұрын

  i think i have

• 
  @anatnasogaming3 ай бұрын

  ​@@_Dynamation_Can you give me the workshop ID?

• 
  @_Dynamation_3 ай бұрын

  Sure, here you go. steamcommunity.com/sharedfiles/filedetails/?id=3161957323 steamcommunity.com/sharedfiles/filedetails/?id=3161957197

• 
  @anatnasogaming3 ай бұрын

  ​@@_Dynamation_thanks

• 
  @_Dynamation_3 ай бұрын

  @@anatnasogaming no problem

• 
  @qubek91163 ай бұрын

  Typical cyberpunk theme song

• 
  @General_NotTaha3 ай бұрын

  So bro returned with his upload machine-gun 💀

• 
  @ajsullivan66123 ай бұрын

  first lol, I need to get this game sooner or later

• 
  @_Dynamation_3 ай бұрын

  haha

• 
  @metoo111123 ай бұрын

  I like the music you added. You also explained everything well!

• 
  @keinanderer99303 ай бұрын

  Have you considered balancing the crankshaft? I also highly suggest to build your timing plate with just blocks, that pipe in the center will introduce gaps that will reduce power.

• 
  @_Dynamation_3 ай бұрын

  i have balanced the crankshaft off camera when i was getting the engine to run, and yes i have tried to use a block instead of the pipe but the video you see here was my second recording. so i just a bit lazy making the timing wheel

• 
  @keinanderer99303 ай бұрын

  ​@@_Dynamation_Alright, btw from where do you know zero width blocks?

• 
  @_Dynamation_3 ай бұрын

  @keinanderer9930 either from @Denis567 or @Icebound Glaceon

• 
  @keinanderer99303 ай бұрын

  @@_Dynamation_ interesting

• 
  @user-hg8sh6lm8i4 ай бұрын

  What kind of black magi- Give me that NOW

• 
  @_Dynamation_3 ай бұрын

  you can find it in the steam workshop