IBC's inflatable boat channel for all things Zodiac and inflatable. Learn how to assemble and repair inflatables, as well as just go out and have a great time on the water.
Can I inflate this with a compressor working on a 12 volt car outlet?
@Lawi_Jake2 ай бұрын
What;s the best type of RIB for bathymetry surveys? is it V-hulled?
@tayeblondon2 ай бұрын
thank you for sharing this video , really very helpful
@janosseres44426 ай бұрын
you can finally get it in white!!!!!
@stefanoskolovouris72239 ай бұрын
Χαιρετισμοί από Ελλάδα.
@ilhemdellali86069 ай бұрын
كيف يتم الحصول على واحدة
@lucaa.34479 ай бұрын
Pvc or hypalon?
@IBCPortland9 ай бұрын
that was pvc, and sadly no longer in the lineup.
@Rongdrik10 ай бұрын
Great 😊
@RichieKeane Жыл бұрын
hi which is a better spec the Cadet 270/310 or the Bombard Typhoon 310 ALU? Both preferred with ALU floor if you can roll up in the bag... Thanks
@samirb2497 Жыл бұрын
Excellent travail
@northfishing_chile4674 Жыл бұрын
what price ?
@CABALCANAL Жыл бұрын
Top!!!!! 👏👏👏👏
@raimondslitovkins1563 Жыл бұрын
Pizdzec vam on vapse neumejit sabrac lotku .ok komnatce iso ciplo iso kaknebudz vrot ani vam uze abasralis dvajom stidna
@jebhaclcl6211 Жыл бұрын
شحال تمان
@ninjamagic5150 Жыл бұрын
What model is this with the airfloor right. Was the keel inflated with the rest of the boat. So u just need to air 1 section to pump the whole boat. Let me know what I'm looking to buy how's the bottom is it have any skid protection and what's the tansom made out of wood or fiberglass. Thanks. Looks awesome. What kind of air was that CO2.
@acoitheadventurer1001 Жыл бұрын
You should inflate it first at least 30% before install the plates.
@JohnPatersonAu Жыл бұрын
I just bought an Australian ex-military MK3 4.7m and cant get the floor in. I used to use these in the military myself back in the 80's and the floor was much easier to get in. Mine has a slightly different layout to this. It has a similar wooden floorboard in the bow, but the next floorboard is a short wooden board that is fixed in the boat and then 4 aluminium floorboards. It's like the floor is a bit too long. I stood on the middle two boards like in this video, but they just popped up again. Also, mine has two long and two short side bits and I couldn't get them to go on at all. I did think of inflating the boat fully without the floor to see if that stretches it a bit, but haven't had the chance to try putting the floor in again yet. Will also try the soapy water tip.
@540globetrotter Жыл бұрын
Looks like a ball ache to me ..
@janicolas43502 жыл бұрын
Heeeuuuuu! il sait monter un cannot gonflable, Luis???? Vraiment Nul
@amarobarcosboat2 жыл бұрын
Botes top ,
@blueschild612 жыл бұрын
I wish you would have shown the box or bag that you took it out of so we could see how easy/difficult it is for one person to carry while packed up. Can you put it on a back pack type rig or do you need a hand truck or something?
@embededfabrication44822 жыл бұрын
will my 20Hp work on that boat? is it longshaft?
@smashy_smasherton2 жыл бұрын
If you didn’t have the humongous red letters obliterating what we are trying to SEE this would actually be helpful.
@mareikemuller52552 жыл бұрын
P𝐫O𝕞O𝓢m
@amarobarcosboat2 жыл бұрын
Top parabéns, lindos botes
@ervinbeci7282 жыл бұрын
I like the clup..nice..i am interested to have one..may i know the price..and your adress.pls..Do you have grey color..
Top os bote inflavel ,e os MAis seguros , lindos botes da zodic,, Sempre refomamos aqui no Brasil.
@candyapple74452 жыл бұрын
There is no indication which way is up on the two side pieces (“stringers”) that lock in the bottom. The manual says they are marked? Can’t see a mark.
@HassanAli-en2hl2 жыл бұрын
What country is this boat in?
@jcBurton20942 жыл бұрын
0:47 Ooops
@mhamedlaidioui75822 жыл бұрын
Merci beaucoup pour cette vidéo 👍👍
@mhamedlaidioui75822 жыл бұрын
Merci beaucoup pour cette vidéo 👍
@BishwaOakes2 жыл бұрын
Thanks, but you obsessively checked those oars so many times, it made me suspect that there's some issue with them, is there?
@virgiliomarian99002 жыл бұрын
Il paiolo non è messo in modo corettol
@raygunlabs2 жыл бұрын
goes where jet skis don't and does it with authority! love this!
@theinflatableboatownersnet56842 жыл бұрын
Nice bit of kit.
@mhamedlaidioui75822 жыл бұрын
Merci pour cette vidéo 👍🙏👍
@amarobarcosboat2 жыл бұрын
Top sem palavras
@margaretocean3222 жыл бұрын
Worst background music ever.
@hildablanco15912 жыл бұрын
Needs a hard bottom with less rubber tubes
@clarkgwozdecki67822 жыл бұрын
is the futura still made?
@eike642 жыл бұрын
I really would prefer Commano 🇩🇪
@tommiritalacom3 жыл бұрын
Approximately what kind of speed/cruising speed Mk6hd with single 60hp? 20knots??
@luigimerlo67813 жыл бұрын
sembra complicato montare il paiolato bisogna essere in 2
@user-jl4et4zr4p3 жыл бұрын
Hello
@blueschild613 жыл бұрын
It would have been nice to see it come out of the bag. As well as go back in to the bag.
@olivel88083 жыл бұрын
😏😒🙄🧐⌚
@fredricknilsson73 жыл бұрын
Very nice boat. WIll it be able to pull a normal 100kg guy on waterskies with 40hp or are 50hk required?
@charlesstiles89043 жыл бұрын
9 minutes and 45 seconds of a screaming air compressor.
Пікірлер
Can I inflate this with a compressor working on a 12 volt car outlet?
What;s the best type of RIB for bathymetry surveys? is it V-hulled?
thank you for sharing this video , really very helpful
you can finally get it in white!!!!!
Χαιρετισμοί από Ελλάδα.
كيف يتم الحصول على واحدة
Pvc or hypalon?
that was pvc, and sadly no longer in the lineup.
Great 😊
hi which is a better spec the Cadet 270/310 or the Bombard Typhoon 310 ALU? Both preferred with ALU floor if you can roll up in the bag... Thanks
Excellent travail
what price ?
Top!!!!! 👏👏👏👏
Pizdzec vam on vapse neumejit sabrac lotku .ok komnatce iso ciplo iso kaknebudz vrot ani vam uze abasralis dvajom stidna
شحال تمان
What model is this with the airfloor right. Was the keel inflated with the rest of the boat. So u just need to air 1 section to pump the whole boat. Let me know what I'm looking to buy how's the bottom is it have any skid protection and what's the tansom made out of wood or fiberglass. Thanks. Looks awesome. What kind of air was that CO2.
You should inflate it first at least 30% before install the plates.
I just bought an Australian ex-military MK3 4.7m and cant get the floor in. I used to use these in the military myself back in the 80's and the floor was much easier to get in. Mine has a slightly different layout to this. It has a similar wooden floorboard in the bow, but the next floorboard is a short wooden board that is fixed in the boat and then 4 aluminium floorboards. It's like the floor is a bit too long. I stood on the middle two boards like in this video, but they just popped up again. Also, mine has two long and two short side bits and I couldn't get them to go on at all. I did think of inflating the boat fully without the floor to see if that stretches it a bit, but haven't had the chance to try putting the floor in again yet. Will also try the soapy water tip.
Looks like a ball ache to me ..
Heeeuuuuu! il sait monter un cannot gonflable, Luis???? Vraiment Nul
Botes top ,
I wish you would have shown the box or bag that you took it out of so we could see how easy/difficult it is for one person to carry while packed up. Can you put it on a back pack type rig or do you need a hand truck or something?
will my 20Hp work on that boat? is it longshaft?
If you didn’t have the humongous red letters obliterating what we are trying to SEE this would actually be helpful.
P𝐫O𝕞O𝓢m
Top parabéns, lindos botes
I like the clup..nice..i am interested to have one..may i know the price..and your adress.pls..Do you have grey color..
inflatableboats.com/Zodiac-MK3-Grand-Raid-Grey-Color-Z80185.htm
Botes infláveis top.
Top os bote inflavel ,e os MAis seguros , lindos botes da zodic,, Sempre refomamos aqui no Brasil.
There is no indication which way is up on the two side pieces (“stringers”) that lock in the bottom. The manual says they are marked? Can’t see a mark.
What country is this boat in?
0:47 Ooops
Merci beaucoup pour cette vidéo 👍👍
Merci beaucoup pour cette vidéo 👍
Thanks, but you obsessively checked those oars so many times, it made me suspect that there's some issue with them, is there?
Il paiolo non è messo in modo corettol
goes where jet skis don't and does it with authority! love this!
Nice bit of kit.
Merci pour cette vidéo 👍🙏👍
Top sem palavras
Worst background music ever.
Needs a hard bottom with less rubber tubes
is the futura still made?
I really would prefer Commano 🇩🇪
Approximately what kind of speed/cruising speed Mk6hd with single 60hp? 20knots??
sembra complicato montare il paiolato bisogna essere in 2
Hello
It would have been nice to see it come out of the bag. As well as go back in to the bag.
😏😒🙄🧐⌚
Very nice boat. WIll it be able to pull a normal 100kg guy on waterskies with 40hp or are 50hk required?
9 minutes and 45 seconds of a screaming air compressor.