Your a legend for making this video I've been pulling my hair out on my 2016 mt 10 wondering why the cruise control light comes on but when I push set nothing happens just watching this video I went and looked at my front brake and seen the brembo logo on master cylinder and brake fluid pot so I pulled in and out my lever but only hear one click so what is it I need to buy from you I live in New Zealand by the way
@Cregtech25 күн бұрын
@@rossi675446 drop us a message at [email protected] and we can link you the part you need.
@LeotsinidisN132 ай бұрын
The amound of times that I have watched this video over the years to troubleshoot my 2017 MT 10 that I bought brand new is hilarious. Cannot thank you enought mate! Recently I developed a flashing cruise control light that occurs a few minutes after I start riding. I am OK with doing work on my cables, so after I will try my cleaning all the switches and readjusting everything I will DM you to purchase a few of your micro switches, should this is something that could help me with. I live in Scotland and I will ofcourse cover any cost. Many thanks again! It takes balls to help others in the community in the manner that you do! Hats off to you sir!
@danielpalmer88074 ай бұрын
Am I correct in saying that link you've provided is from the US? Van you not get better quality film in the UK?
@Cregtech4 ай бұрын
I was unable to locate any. The ones I tried did not have the contrast needed and gave a poor effect. I found one that works and just used that. There is now a company called colour clusters that do the film pre cut. I'd recommend them as they're cheaper aswell as precut.
@danielpalmer88074 ай бұрын
@@Cregtech Thanks for the reply, I'll look into that! There also plenty on amazon at around £15 a sheet, wonder if they'd be any good too compared to the cheap ebay stuff. The problem with buying precut, is if you mess it up the first time!
@jeffgehman83445 ай бұрын
Could you please tell me which mirrors you have? And do they screw right into the bar's threaded holes? Thanks!
@Cregtech5 ай бұрын
Hi Jeff. These are Rizoma reverse retro. I have fitted them using Rizoma bar ends that do screw direct into the threaded MT bars. They're not a cheap solution but they are awesome quality and work really well. I also supply them www.cregtech.co.uk
@benrideout95836 ай бұрын
Fair play mate. My 2017 SP could do with the braided line upgrade but after watching how much work you had to do I’m probably will just upgrade the pads or if I’m feeling flush get crescent Yamaha to fit the lines!!
@bccapone8377 ай бұрын
Great video thanks , any idea's how to get rid of condensation in the dash or is that normal, is there a permanent fix for it or does everyone have condensation in dash in colder weather , I guess sealing it up would make it worse as it needs to breath
@richardsutton018 ай бұрын
Just come across your video. My FJR1300 Gen 3 uses exactly the Sumitomo 13 pin connector as your bike although 2 of the pins are not actually used on mine. I just bought a new connector and wired up a pass-through plug and play connector using short lengths of cable with the ST2 simply connected into my plug and play connector. I have made no tappings into or changes to the original bike wiring at all. If I want to revert back to original, I simply unplug the pass-through and plug the original Sumitomo connector back together. By the way, on Yamaha bikes like ours which have the flashers controlled by a multifunction module rather than a relay, the common signal to the indicators, which you are already accessing, is a switched live so you can use that for both the ST2 signal and the ST2 12v +ve. You do not need to access any other connector. Also, it's much easier and to put the foam bits into the two slots in the outside of the white housing rather than fiddle about with tweezers trying to get them into the inner part of the mechanism. The foam is then squashed between two large flat surfaces rather than by an edge profile and can be more easily judged. You are working on the wrong side of the latching mechanism. The foam discs cannot move if you slot then into the right place. Just got to the end of the video and I see you've now moved the foam discs to the correct location. You can access those two slots without taking the latching mechanism out.
@Cregtech8 ай бұрын
Interestingly I bought a connecter to do just that but it was the wrong one and I gave up as what I had was working. Do you have the model or description of the Sumitomo connector as I have a new old MT10 and will be fitting the STS to this over the winter.
@richardsutton018 ай бұрын
@@Cregtech For some reason my replies to you keep being deleted by KZread. I've no idea what's going on. I'll see if this comment vanishes!
@richardsutton018 ай бұрын
OK, That's another detailed reply deleted by KZread. What the hell is going on?
@richardsutton018 ай бұрын
Oh well. I just can't post up any comment longer than a couple of sentences. Everything apart from the short comments just gets deleted and I've no idea why. I'll do another post with just the connector details and nothing else.
@richardsutton018 ай бұрын
Finally, a comment that is not deleted! If you do a search for "STS Turn Signal Harness for Gen 3 FJR1300" you should find the full thread with my photos.
@MarkFord9 ай бұрын
Mate you should be wearing a cape in this video, you're a bloody hero! Highly appreciate the work this took.
@nelsonperez434111 ай бұрын
Where did you get the frame plugs ?
@RBFR01 Жыл бұрын
That's awesome where did you buy that?
@Cregtech Жыл бұрын
I sell them... cregtech.co.uk/shop/ols/products/mt10-blaster-x-tail-light
@stacys3857 Жыл бұрын
The turn signal connectors are arranged corresponding with the side. Right on right. Left on left. For the plugs, green=right and brown=left
@user-tt3ru9wu8u Жыл бұрын
Hello, is there any communication software that can contact you? Currently there is a clutch switch, a side column switch, start, put in gear and turn off the engine. I have to ask you about related questions. My language is Chinese and I can only use a translator to communicate with you.
@Cregtech Жыл бұрын
Visit my website www.cregtech.co.uk and message me through there.
@321corsa Жыл бұрын
Is the R1 end can much different to the MT10 end can?
@Cregtech Жыл бұрын
It's a wider bore so deeper sound. Being more upswept (when fitted with the R1 cat) it's arguably a better look.
@321corsa Жыл бұрын
@@Cregtech Thanks for the reply 👍 is it just a case of trimming the heat shield on the R1 cat if I want to keep the standard MT10 rear sets?
@Cregtech Жыл бұрын
@@321corsa yes.
@deanstutorials2299 Жыл бұрын
Hello.....can anyone help please... My yamaha mt-10 has an issue with cruise control not working.light is flashing on dash..and engine management light on. There is a box under the seat right in front of the key hole but under the seat ( inside ) It is clicking. I took it apart and put it back together as the cogs weren't turning inside. That stopped the clicking but now the cruise control isn't working. Coincidence? Or is that the cruise Control regulator or whatever.. Any help please.
@tobias88- Жыл бұрын
Great video where do you order the replacement switches from thought I ordered the correct switch all soldered in but the on/off is wrong way round so front brake light is constantly on 🤬
@alf786 Жыл бұрын
Mega job lol wow
@Supersaiyanwolf Жыл бұрын
Hel v1 and rear caliper comes with dust seal?
@mikerichardson3452 Жыл бұрын
Cracking video that, I'll work through these to see what's causing my cc to fail 👍
@grzegorzboguslawski7470 Жыл бұрын
Super Thank You...👌
@msport6191 Жыл бұрын
Hi Craig is this the same install to the MT-09
@jordesign Жыл бұрын
I bet the most common issue is trying to use cruise in gears 1-3.... CC only works in gears 4-6... Took me a while to figure that out. Thanks Owners Manual!
@georgeprobert7621 Жыл бұрын
Ive got a problem with a Tracer 900gt, is it the same setup as the MT10?
@bielarodada7959 Жыл бұрын
A honda aqui e entrada DLC padrão Honda irei comprar uma adaptador obd2 pra DLC padrão Honda será q vai funcionar?
@Cregtech Жыл бұрын
I can't copy this text to translate my friend. I don't know what your asking.
@bielarodada7959 Жыл бұрын
Será q em motos Honda funciona? Abraço
@alf786 Жыл бұрын
Got this issue on the 2022 now when changing the lever :( replaced it back with the original And still have this orange light flashing . Made sure all was tightened. Now at Yamaha :(
@Boney2x Жыл бұрын
So I was riding yesterday everything worked perfectly, today I go to press the button to turn it on and it turns on but when I go to set it, the button clicks but it won’t set today. It did rain yesterday, lmk what you think the issue is.
@Cregtech Жыл бұрын
It'll be wet. Mines done it before in heavy rain. It'll usually dries and sorts itself out but may need the cover taken off and inspected. Also give it a clean with some contact cleaner.
@UnburdenedByWhatHasBeen2 жыл бұрын
Where can i buy these switches?
@mrconta2 жыл бұрын
try to heat the screen up, will make the glue loosen easier
@UnburdenedByWhatHasBeen2 жыл бұрын
did this cover make a difference? just bought a 2019 with 1200 miles and the seat is hard as hell. im 6'2" 250 pounds so my ass is sore after about 40 miles on this thing .😂 seat looks good man.
@Cregtech2 жыл бұрын
No. Not at all. It's purely for looks. Try riding in cycling shorts though. You can thank me later 👍🏻
@UnburdenedByWhatHasBeen2 жыл бұрын
@@Cregtech yeah i have a pair for my mountain bike. I was thinking about trying that. Im going to buy some ballistics gel and cut a square of the foam out. I'll probably still get a different cover or this volcano cover.
@korma97322 жыл бұрын
There was a Yamaha recall for the brake switch
@Cregtech2 жыл бұрын
Yep. I think I mention that in the video.
@azhariqbal12122 жыл бұрын
Hi Chris I am a new subscribers, can you please tell me should shell I buy the MT10sp old model or shell I buy the new 2022 MT10.
@george6099 Жыл бұрын
New MT 10 sp is better
@benrideout95832 жыл бұрын
Currently going through the pain of my cruise control not working on my mt10 sp. Iv narrowed it down to my front brake switch. My front brake is sometimes leaving the rear brake light on so therefore the cruise control won’t activate as the bike thinks the brake is on. Ever heard of this happening mate? Well it’s off to Yamaha on Thursday so see what they say I guess. Cheers Ben
@Cregtech2 жыл бұрын
Yep. Is a recall issue and new switch fitted.
@benrideout95832 жыл бұрын
@@Cregtech thanks for the reply mate. After giving crescent Yamaha in verwood my reg they said the recall was done in January last year. I fitted the Gilles leavers but can still hear both clicks on the brake switch clearly so don’t think they have had an effect. May need another switch I suppose 🤷♂️
@arshadcoursework2 жыл бұрын
Thank you so much for this video, this helped me fix my problem which was the clutch sensor and lever not fully opening for 2 clicks. Your video was awesome to follow keep up the great work mate
@LeotsinidisN132 жыл бұрын
nice one mate- thanks fir sharing the info you gathered !
@MrDeepseadweller2 жыл бұрын
I ordered one for my Z900 a couple of weeks ago and it arrives next week. I'm also getting the gel insert, which goes into a hole you cut in the foam on the seat. I chose my own design so hopefully the colours match my bike!
@PERLaLIFE2 жыл бұрын
Are you using the r1 master cylinder and still able too retain the cruise control? Cheers!
@Cregtech2 жыл бұрын
I was, the original switch bolts straight on to the R1 MC with no modification. You're brake line will be a shit angle but it does reach. I am now using the Brembo RCS19 master cylinder which doesn't use the OEM switch but my plug and play module to retain cruise control.
@eevrim2 жыл бұрын
I solved the problem with the help of this video. Thank you so much!
@new.one18862 жыл бұрын
يجب تغيير حساس الفرامل الاماميه وحساس الكلتش
@timsharp65542 жыл бұрын
Great video! 👍 really helpful 👌 I’m currently having the intermittent cancellation of the cruise control very annoying….. I’ve narrowed it down to the front brake switches, dealers are just so expensive 🤦♂️ If this is something your able to help out with that’ll be great 🤘
@Cregtech2 жыл бұрын
Yes it is, check out my store... cregtech.co.uk/shop/ols/products/mt10-oem-brake-microswitch
@PovilasPanavas2 жыл бұрын
Very informative video. Thank you :)
@mr.soouch56242 жыл бұрын
Are these smoked or clear?
@Cregtech2 жыл бұрын
This smoked, it is a very light smoke. They are available in clear too.
@jdub2642 жыл бұрын
How did you acquire the carbon fiber parts, or is it powder coat (type of paint)?
@Cregtech2 жыл бұрын
They're carbon from a company I had a terrible experience with called Motocomposites. Personally I'd avoid them and try RPM Carbon 👍🏼
@jdub2642 жыл бұрын
@@Cregtech I will look the other way. Thank you!
@reparosautomotivos64292 жыл бұрын
Manual de instruções em português do Scaner kw310kzread.info/dash/bejne/fqWV0JmmosfOd7g.html
@paulgroves74052 жыл бұрын
Great video, really helpful! I’ve narrowed it down to sticky pin on the rear brake switch, any advice for best product to lube with, or can you recommend where to get a replacement?
@Cregtech2 жыл бұрын
I just used a bit of GT85/WD40. I have now replaced mine with my hydraulic pressure switch box though.
@dylanm79722 жыл бұрын
Plz plz plz do more fly bys of the mt10 and a bit more on the Austin racing exhaust
@dannynelson19413 жыл бұрын
Switched from stock levers too billet forged ASV shorty levers yesterday and this video helped a lot! Thanks for the help Chris! I was also curious as to what company/website you got your rear hugger? I love the look.
@Cregtech3 жыл бұрын
Thanks. The hugger is from a chap called James Heddington. You contact him on FB... facebook.com/james.hedington
@jayplisson11903 жыл бұрын
Where did you get your seat ??
@Cregtech3 жыл бұрын
Seat is the standard seat with a custom cover from an Italian firm Volcano Industries. I have a vid with details and how to fit it.
@pelleahlqvist49743 жыл бұрын
Hi. Where to get black screws?
@Cregtech3 жыл бұрын
All sorted and in the post Pelle 👍🏼
@nathanhornbacher8109 Жыл бұрын
Where did you get the black screws? I need some. Thanks
Пікірлер
Your a legend for making this video I've been pulling my hair out on my 2016 mt 10 wondering why the cruise control light comes on but when I push set nothing happens just watching this video I went and looked at my front brake and seen the brembo logo on master cylinder and brake fluid pot so I pulled in and out my lever but only hear one click so what is it I need to buy from you I live in New Zealand by the way
@@rossi675446 drop us a message at [email protected] and we can link you the part you need.
The amound of times that I have watched this video over the years to troubleshoot my 2017 MT 10 that I bought brand new is hilarious. Cannot thank you enought mate! Recently I developed a flashing cruise control light that occurs a few minutes after I start riding. I am OK with doing work on my cables, so after I will try my cleaning all the switches and readjusting everything I will DM you to purchase a few of your micro switches, should this is something that could help me with. I live in Scotland and I will ofcourse cover any cost. Many thanks again! It takes balls to help others in the community in the manner that you do! Hats off to you sir!
Am I correct in saying that link you've provided is from the US? Van you not get better quality film in the UK?
I was unable to locate any. The ones I tried did not have the contrast needed and gave a poor effect. I found one that works and just used that. There is now a company called colour clusters that do the film pre cut. I'd recommend them as they're cheaper aswell as precut.
@@Cregtech Thanks for the reply, I'll look into that! There also plenty on amazon at around £15 a sheet, wonder if they'd be any good too compared to the cheap ebay stuff. The problem with buying precut, is if you mess it up the first time!
Could you please tell me which mirrors you have? And do they screw right into the bar's threaded holes? Thanks!
Hi Jeff. These are Rizoma reverse retro. I have fitted them using Rizoma bar ends that do screw direct into the threaded MT bars. They're not a cheap solution but they are awesome quality and work really well. I also supply them www.cregtech.co.uk
Fair play mate. My 2017 SP could do with the braided line upgrade but after watching how much work you had to do I’m probably will just upgrade the pads or if I’m feeling flush get crescent Yamaha to fit the lines!!
Great video thanks , any idea's how to get rid of condensation in the dash or is that normal, is there a permanent fix for it or does everyone have condensation in dash in colder weather , I guess sealing it up would make it worse as it needs to breath
Just come across your video. My FJR1300 Gen 3 uses exactly the Sumitomo 13 pin connector as your bike although 2 of the pins are not actually used on mine. I just bought a new connector and wired up a pass-through plug and play connector using short lengths of cable with the ST2 simply connected into my plug and play connector. I have made no tappings into or changes to the original bike wiring at all. If I want to revert back to original, I simply unplug the pass-through and plug the original Sumitomo connector back together. By the way, on Yamaha bikes like ours which have the flashers controlled by a multifunction module rather than a relay, the common signal to the indicators, which you are already accessing, is a switched live so you can use that for both the ST2 signal and the ST2 12v +ve. You do not need to access any other connector. Also, it's much easier and to put the foam bits into the two slots in the outside of the white housing rather than fiddle about with tweezers trying to get them into the inner part of the mechanism. The foam is then squashed between two large flat surfaces rather than by an edge profile and can be more easily judged. You are working on the wrong side of the latching mechanism. The foam discs cannot move if you slot then into the right place. Just got to the end of the video and I see you've now moved the foam discs to the correct location. You can access those two slots without taking the latching mechanism out.
Interestingly I bought a connecter to do just that but it was the wrong one and I gave up as what I had was working. Do you have the model or description of the Sumitomo connector as I have a new old MT10 and will be fitting the STS to this over the winter.
@@Cregtech For some reason my replies to you keep being deleted by KZread. I've no idea what's going on. I'll see if this comment vanishes!
OK, That's another detailed reply deleted by KZread. What the hell is going on?
Oh well. I just can't post up any comment longer than a couple of sentences. Everything apart from the short comments just gets deleted and I've no idea why. I'll do another post with just the connector details and nothing else.
Finally, a comment that is not deleted! If you do a search for "STS Turn Signal Harness for Gen 3 FJR1300" you should find the full thread with my photos.
Mate you should be wearing a cape in this video, you're a bloody hero! Highly appreciate the work this took.
Where did you get the frame plugs ?
That's awesome where did you buy that?
I sell them... cregtech.co.uk/shop/ols/products/mt10-blaster-x-tail-light
The turn signal connectors are arranged corresponding with the side. Right on right. Left on left. For the plugs, green=right and brown=left
Hello, is there any communication software that can contact you? Currently there is a clutch switch, a side column switch, start, put in gear and turn off the engine. I have to ask you about related questions. My language is Chinese and I can only use a translator to communicate with you.
Visit my website www.cregtech.co.uk and message me through there.
Is the R1 end can much different to the MT10 end can?
It's a wider bore so deeper sound. Being more upswept (when fitted with the R1 cat) it's arguably a better look.
@@Cregtech Thanks for the reply 👍 is it just a case of trimming the heat shield on the R1 cat if I want to keep the standard MT10 rear sets?
@@321corsa yes.
Hello.....can anyone help please... My yamaha mt-10 has an issue with cruise control not working.light is flashing on dash..and engine management light on. There is a box under the seat right in front of the key hole but under the seat ( inside ) It is clicking. I took it apart and put it back together as the cogs weren't turning inside. That stopped the clicking but now the cruise control isn't working. Coincidence? Or is that the cruise Control regulator or whatever.. Any help please.
Great video where do you order the replacement switches from thought I ordered the correct switch all soldered in but the on/off is wrong way round so front brake light is constantly on 🤬
Mega job lol wow
Hel v1 and rear caliper comes with dust seal?
Cracking video that, I'll work through these to see what's causing my cc to fail 👍
Super Thank You...👌
Hi Craig is this the same install to the MT-09
I bet the most common issue is trying to use cruise in gears 1-3.... CC only works in gears 4-6... Took me a while to figure that out. Thanks Owners Manual!
Ive got a problem with a Tracer 900gt, is it the same setup as the MT10?
A honda aqui e entrada DLC padrão Honda irei comprar uma adaptador obd2 pra DLC padrão Honda será q vai funcionar?
I can't copy this text to translate my friend. I don't know what your asking.
Será q em motos Honda funciona? Abraço
Got this issue on the 2022 now when changing the lever :( replaced it back with the original And still have this orange light flashing . Made sure all was tightened. Now at Yamaha :(
So I was riding yesterday everything worked perfectly, today I go to press the button to turn it on and it turns on but when I go to set it, the button clicks but it won’t set today. It did rain yesterday, lmk what you think the issue is.
It'll be wet. Mines done it before in heavy rain. It'll usually dries and sorts itself out but may need the cover taken off and inspected. Also give it a clean with some contact cleaner.
Where can i buy these switches?
try to heat the screen up, will make the glue loosen easier
did this cover make a difference? just bought a 2019 with 1200 miles and the seat is hard as hell. im 6'2" 250 pounds so my ass is sore after about 40 miles on this thing .😂 seat looks good man.
No. Not at all. It's purely for looks. Try riding in cycling shorts though. You can thank me later 👍🏻
@@Cregtech yeah i have a pair for my mountain bike. I was thinking about trying that. Im going to buy some ballistics gel and cut a square of the foam out. I'll probably still get a different cover or this volcano cover.
There was a Yamaha recall for the brake switch
Yep. I think I mention that in the video.
Hi Chris I am a new subscribers, can you please tell me should shell I buy the MT10sp old model or shell I buy the new 2022 MT10.
New MT 10 sp is better
Currently going through the pain of my cruise control not working on my mt10 sp. Iv narrowed it down to my front brake switch. My front brake is sometimes leaving the rear brake light on so therefore the cruise control won’t activate as the bike thinks the brake is on. Ever heard of this happening mate? Well it’s off to Yamaha on Thursday so see what they say I guess. Cheers Ben
Yep. Is a recall issue and new switch fitted.
@@Cregtech thanks for the reply mate. After giving crescent Yamaha in verwood my reg they said the recall was done in January last year. I fitted the Gilles leavers but can still hear both clicks on the brake switch clearly so don’t think they have had an effect. May need another switch I suppose 🤷♂️
Thank you so much for this video, this helped me fix my problem which was the clutch sensor and lever not fully opening for 2 clicks. Your video was awesome to follow keep up the great work mate
nice one mate- thanks fir sharing the info you gathered !
I ordered one for my Z900 a couple of weeks ago and it arrives next week. I'm also getting the gel insert, which goes into a hole you cut in the foam on the seat. I chose my own design so hopefully the colours match my bike!
Are you using the r1 master cylinder and still able too retain the cruise control? Cheers!
I was, the original switch bolts straight on to the R1 MC with no modification. You're brake line will be a shit angle but it does reach. I am now using the Brembo RCS19 master cylinder which doesn't use the OEM switch but my plug and play module to retain cruise control.
I solved the problem with the help of this video. Thank you so much!
يجب تغيير حساس الفرامل الاماميه وحساس الكلتش
Great video! 👍 really helpful 👌 I’m currently having the intermittent cancellation of the cruise control very annoying….. I’ve narrowed it down to the front brake switches, dealers are just so expensive 🤦♂️ If this is something your able to help out with that’ll be great 🤘
Yes it is, check out my store... cregtech.co.uk/shop/ols/products/mt10-oem-brake-microswitch
Very informative video. Thank you :)
Are these smoked or clear?
This smoked, it is a very light smoke. They are available in clear too.
How did you acquire the carbon fiber parts, or is it powder coat (type of paint)?
They're carbon from a company I had a terrible experience with called Motocomposites. Personally I'd avoid them and try RPM Carbon 👍🏼
@@Cregtech I will look the other way. Thank you!
Manual de instruções em português do Scaner kw310kzread.info/dash/bejne/fqWV0JmmosfOd7g.html
Great video, really helpful! I’ve narrowed it down to sticky pin on the rear brake switch, any advice for best product to lube with, or can you recommend where to get a replacement?
I just used a bit of GT85/WD40. I have now replaced mine with my hydraulic pressure switch box though.
Plz plz plz do more fly bys of the mt10 and a bit more on the Austin racing exhaust
Switched from stock levers too billet forged ASV shorty levers yesterday and this video helped a lot! Thanks for the help Chris! I was also curious as to what company/website you got your rear hugger? I love the look.
Thanks. The hugger is from a chap called James Heddington. You contact him on FB... facebook.com/james.hedington
Where did you get your seat ??
Seat is the standard seat with a custom cover from an Italian firm Volcano Industries. I have a vid with details and how to fit it.
Hi. Where to get black screws?
All sorted and in the post Pelle 👍🏼
Where did you get the black screws? I need some. Thanks
where did you buy this seat cover?
Volcano industries 👍🏼
الله يجزاك خير