Пікірлер

• 
  @nadiatrushy Жыл бұрын

  when removing the caliper brackets bolts you used a combination spanner 19 for the second bolt. I tried to remove them with a ratchet wrench with 19mm socket but it is too loose and will damage the bolt head. What you can recommend for removing these two bolts as my car's tire is removed and I am thinking what best tool for these bolts to buy in order to continue brake disc change?

• 
  @reza79dk Жыл бұрын

  WD40, spanner 19 and 1kg hammer is the best tool to remove the two 19mm bolt, in my opinion.

• 
  @nadiatrushy Жыл бұрын

  @@reza79dk Thanks a lot. I did apply wd40 already. I will buy a spanner and try with it then. Thank you again

• 
  @malcolmwillden8876 Жыл бұрын

  Why be so precise and then not show the piston pushback tool, I noted it was the correct tool.

• 
  @reza79dk Жыл бұрын

  You can use any piston pushback tool, it doesn't require any special tool or piston head, that's why I didn't show it on the video.I didn't think it was necessary.

• 
  @Martin-ll7jc3 жыл бұрын

  Torque wrench needed to tighten back up

• 
  @philippe94414 жыл бұрын

  Please advise what grease and silicone were used in the video. Thanks

• 
  @reza79dk4 жыл бұрын

  Philippe Chong i did use Copper Grease from biltema store, and CRC silicone grease (google the name).It has been about 8 month i did make this video and the brakes works perfekt till now.

• 
  @nadiatrushy Жыл бұрын

  @@reza79dk did you apply CRC silicone grease on both slider caliper pins or on one only? As you said in the video not to change the position of each one of them. Thanks again

• 
  @reza79dk Жыл бұрын

  @@nadiatrushy I have lubricated both sticks with silicone, the sticks have different lengths, so take one out and lubricate it and put it back in place.

• 
  @Taner-Aydın5 жыл бұрын

  thanks :) Beautiful and knowledgeable workmanship.