Пікірлер

• 
  @TojuRacing-ry4cf10 күн бұрын

  Good video explanation. Gave you a sub. Race On!

• 
  @markfrey2885Ай бұрын

  4:14 Thanks fir the review. The Farrari 512 Sunoco #6 did use different Rear wings depending on what track it was Racing on. Also some unpainted bare aluminum wing is larger and has a deeper dish. This is correct. They used it to create more Rear down force. Also the yellow airbox could be a clear lexan airbox.

• 
  @user-hh2eg7or4s4 ай бұрын

  no fly by.my it was too fast lol

• 
  @jcsgaragejohnc.50275 ай бұрын

  Excellent how to, any chance on showing how you wired the whole unit up. TYIA

• 
  @foothillsscaleslotcars92925 ай бұрын

  Unfortunately, I didn’t go into to detail. Starting around 1:30 to 2:40, there’s some video, but no explanation.

• 
  @SIMONSEZ236 ай бұрын

  (to those that find the video) yes ..a drip of oil in the center armature hole Before testing/running any pancake chassis and the front and rear motor shaft bushings on the inline chassis. The noise boxes are very brittle (of course) and very rare and valuable and a bit pricey to those seeking them these days. AFX made 10 models of the Magnasonic cars which came out in 1978, using at least 5 of the old AFX bodies and paint schemes, and 5 new paint schemes of the others. and a NOTE to anyone finding this video and refurbishing the AFX MT chassis - clean the brush springs (and pickup springs)very well including the ends of them to insure good electrical contact and stretch them to sit as high as the top of the hole or a hair below for best tension and power and speed. Also, boil the oil out of any old brushes by sitting them on an older type stove top coil until the smoke clears or touching with a soldering iron on some cardboard or think pieces of paper.

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks for the tips! Theres just something about a pancake motor car.

• 
  @SIMONSEZ236 ай бұрын

  just a drip of oil in any pancake slot car armature hole before testing / running of course. The front and rear motor shaft bushings on an inline. The Magasonice came out in 1978. The little motor noise boxes are rare and pricey for what they are. Very collectible pieces an d cars. AFX only made 10 models of the M.S. cars.

• 
  @foothillsscaleslotcars92926 ай бұрын

  Great point!

• 
  @SIMONSEZ236 ай бұрын

  Very nice. Investing time in any HO slot car chassis is a plus. especially a pancake.

• 
  @foothillsscaleslotcars92926 ай бұрын

  Totally agree!

• 
  @SIMONSEZ236 ай бұрын

  Very nice. Investing time in any HO slot car chassis is a plus.

• 
  @MuyAnimalista7 ай бұрын

  FANTASTIC CAR !!!!!!!

• 
  @foothillsscaleslotcars92926 ай бұрын

  They sure are!

• 
  @jrodslotcars52787 ай бұрын

  Awesome video keep it up thanks.

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks for the kind words

• 
  @dirk1407 ай бұрын

  Greetings from S Africa. Did Carrera not also make a 512M. Of course FLY Car Model made a fake 512M CL (Coda Lunga) in the Sunoco colours. Apart from this "blunder" (on purpose I suppose) the FLY Car Model range of 512S cars from the Berlineta, the Spider and the CL, the scale and proportions were IMO the best ever made and sad to say they never made the 512M. Hoping that SlotIt will bring us the Kyalami winner in the 512M!

• 
  @foothillsscaleslotcars92926 ай бұрын

  I'm not sure about Carrera< maybe in the Profi era? I have to agree about Fly models, they are always spot on.

• 
  @VETTE-wj8qq8 ай бұрын

  Nicely done......

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks

• 
  @keithfilkins20439 ай бұрын

  Good video, thanks

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks for watching

• 
  @exoditegrayc11 ай бұрын

  😍 Thanks for sharing!👍

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks for watching.

• 
  @exoditegrayc11 ай бұрын

  Thanks! Cool vid with cool muzak! Good info! Cheers!

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks, I hope you found it entertaining.

• 
  @shiftintohigh5564 Жыл бұрын

  I just bought a NOS Porsche Can Am car identical to that. Ordered replacement L&M decal set. I found my tackle box of childhood HO (Aurora) cars. Cleaning em up! Oiled - Run great! Bought trackset from ProTinkerToys . Started buying more cars, building cars, made a layout, really went nutz. Watch out, it could happen to you. lol

• 
  @foothillsscaleslotcars92926 ай бұрын

  That is great, I love those stories.

• 
  @olafjentzsch6759 Жыл бұрын

  Awesome score 🏎

• 
  @foothillsscaleslotcars92926 ай бұрын

  It sure was, now I'm not certain what to do with it.

• 
  @chrisfreter3629 Жыл бұрын

  I had to get both the red and blue releases.

• 
  @foothillsscaleslotcars92926 ай бұрын

  Of course, it's an awesome car

• 
  @Justjack613 Жыл бұрын

  Wow. I just use a 9V battery.

• 
  @foothillsscaleslotcars92926 ай бұрын

  Absolutely, I kinda like the bench work art too.

• 
  @jordipena7984 Жыл бұрын

  👌

• 
  @foothillsscaleslotcars92926 ай бұрын

  Thanks for watching

• 
  @DaveBoss302 Жыл бұрын

  Oh, that is one want next.

• 
  @foothillsscaleslotcars92926 ай бұрын

  It's hard to stop at one...or twelve.

• 
  @slotr Жыл бұрын

  Thanks for sharing, great to see a different take on that car

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks so much. There are so many under represented slot cars available.

• 
  @knoxsyncro2988 Жыл бұрын

  Thanks for sharing that information. That's cool, little known slot car.

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks, I thought so too.

• 
  @bradsanders6954 Жыл бұрын

  2 years ago, I had no slot car track, now there is nothing like these boxes showing up. The Cheetah, was my fav car back in my HO days as a little kid. It was my first car to order, now there's 2 of them here from Germany. The 917K is currently the hot rod Im working on.

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Oh yeah, that new car smell. Thanks for tuning in.

• 
  @slotr Жыл бұрын

  Ooh that brass machining waste could have ruined that crown gear. Good spot! I found on my Carrera track these cars run better with the Slotting Plus guide replacement, they're far too keen to jump out of the slot otherwise

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  So true, it was really hard to see at first. Definitely didn't expect that from a Slot.It

• 
  @slotcardude68 Жыл бұрын

  You don't NEED one, but it helps!!!! Subbed your channel!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks for joining in, I hope that you continue to enjoy the content.

• 
  @nancywhitehead2223 Жыл бұрын

  P R O M O S M

• 
  @knoxsyncro2988 Жыл бұрын

  Nice video, always just enough information

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Appreciate it!

• 
  @JWB671 Жыл бұрын

  So is there a carrera digital system hooked up to this wooden track? How is it digital?

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Yes there is. I did a custom build using Carrera hardware. I have another video showing some of the process

• 
  @JWB671 Жыл бұрын

  @@foothillsscaleslotcars9292 I have zero electrical experience. How do you connect the hardware wires to the braided track you build yourself?

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Basically, I just copied the Carrera wiring system. The main difference is that I had to bring the wire to the racing surface and solder it to the copper tape

• 
  @All-ScaleSlotCars Жыл бұрын

  Great video! When I was a kid I used to take off the magnasonic thing and use the regular clip. I felt that it may be slowing the car down but was never really sure. Like you said, I think my parents were happy though! Those police cars and fire chiefs would come with a special chassis that had working overhead lights.

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks so much. I have some of the flashing light cars too.

• 
  @kirbs50 Жыл бұрын

  Very good video. Very informative. And thank you for not asking me to subscribe before showing me some content.

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  I’m glad that you liked it, thanks for joining in

• 
  @Gale_Force_Raceway Жыл бұрын

  There we go! All subb'ed up and full bell'ed! Lookin forward to more!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks so much, I’ve been following you as well 🏁

• 
  @Gale_Force_Raceway Жыл бұрын

  @@foothillsscaleslotcars9292 thank you!

• 
  @slotcardude68 Жыл бұрын

  Nice track!!!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks, it was a lot of fun to build.

• 
  @slotcardude68 Жыл бұрын

  Looking good after the refurbishment!!!!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks so much

• 
  @slotcardude68 Жыл бұрын

  Very nice tutorial, thank you!!!!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks, it's always fun kicking around ideas

• 
  @knoxsyncro2988 Жыл бұрын

  Thanks for the information, not every experiment works the first time

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks, I’ll keep tuning

• 
  @knoxsyncro2988 Жыл бұрын

  Parts are great to have

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  They sure are

• 
  @knoxsyncro2988 Жыл бұрын

  Great score

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  It sure was

• 
  @karlavilleda4234 Жыл бұрын

  🆗💯 No

• 
  @richardlange9094 Жыл бұрын

  Thanks for making this video. I consider myself new to the hobby. I know it is a pain but I and I think others want to see all the stuff from start thru finish, I learn so much from these videos. Thanks again

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks for watching, I’m glad that you found it informative

• 
  @somerandomdudelonelyAF Жыл бұрын

  I mean, at least you know you have parts

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks, I was gifted that box.

• 
  @tedv8789 Жыл бұрын

  An L&M Lola car like that was in the house around 1976 or 77. I could clean and rebuild them when I was 8 and knew to ride the outside rail 45ish years before it became a thing in present day NASCAR. Thanks for the post!!!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks so much, it's fun refreshing my memories

• 
  @jerseymike4755 Жыл бұрын

  That goes really good

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thank you

• 
  @ungurdani8346 Жыл бұрын

  Salut my friend super car super video subscribe subscribe...

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  Thanks so much, I'm glad you liked it.

• 
  @andyleather3014 Жыл бұрын

  tyre!!!

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  LOL, England and USA, two common people separated by a common language LOL

• 
  @mllandry1 Жыл бұрын

  spring doesnt rotate after installing the guide on a 132 car , is there a trick ?

• 
  @foothillsscaleslotcars9292 Жыл бұрын

  As my testing and usage has continued, the Frankenslot guide is a little tight. They may have made additional changes in more recent releases.

• 
  @maraslots2 жыл бұрын

  Is that copper tape on the Carrera track?

• 
  @foothillsscaleslotcars92922 жыл бұрын

  It is copper tape, but it is a custom routed MDF wood track that I built. Thanks for the interest 🏁

• 
  @Harrowder222 жыл бұрын

  kzread.info/dash/bejne/eoB-1dWnaKauYqg.html /; Campeonato Internacional en Zalla , prueba 12 horas en pista 16 equipos , hay otro vídeo más de jornada

• 
  @robinswenson90452 жыл бұрын

  I race r.c. cars I would like to know and a fan of nascar I would like to know who was the race driver who's driving the 1970s AMC javelin I like to paint the car body like that I know the molded for oval racing of Camaro body but if I make the body that paint job people get the idea

• 
  @foothillsscaleslotcars92922 жыл бұрын

  In NASCAR, Penske built an AMC Matador for Bobby Allison. The AMC Javelin was driven by Mark Donahue in SCCA Trans Am. Thanks for your interest

• 
  @mccheeseburger012 жыл бұрын

  What type of paint do you recommend for the tomy guard rails?

• 
  @foothillsscaleslotcars92922 жыл бұрын

  Thanks for the interest. I used Krylon. It’s held up well, only chipping a little with all of the abuse