Пікірлер

• 
  @xeren459 күн бұрын

  Pretty sure the CT15E has an anti-static hose too (it should say "AS" on it, i just doesn't have the braiding on it.

• 
  @philr74829 күн бұрын

  Can you use any standard can you use any standard size blade or do you have to use Makita only

• 
  @KhalidKhan-h5iАй бұрын

  How mean price

• 
  @garagehobbiesАй бұрын

  A tripod would be nice here.

• 
  @sladeconstruction3411Ай бұрын

  What is the cut depth capacity at 90°? Spec says it'll only cut 46mm but my trim saw with 165mm diameter blade cuts 55mm. Surely this saw cuts more than 46mm?

• 
  @julianweiser9985Ай бұрын

  I used a kärcher vac at my company... The job was to remove very fine dust from an air dryer. I got shocked around 20x.... Never doing that again...

• 
  @austinsmith8010Ай бұрын

  I just bought the Festool CT 36 E AC along with the Planex LHS 2 225 EQI-Plus, DTS 400 REQ-plus sander and the RTS 400 REQ orbital sander. I have just learned more information abut the hose and conections that come stock with my dust extractor i belive it is the D36 hose, solid black. from my understanding, the hose that comes stock is specifically designed for the Planex LHS 2 225 EQI-Plus drywall sander. does this mean I need to buy a different hose for the RTS and DTS sanders? is there a different end attachment I need to hook-up to the stock hose? would you recommend to the adapter or a new hose

• 
  @marioeddenalvarez4771Ай бұрын

  Interesting in the smaller miter saw ,still available?

• 
  @mickey533Ай бұрын

  Fantastic. I can finally use my Makita sander

• 
  @janverelst18042 ай бұрын

  Can you use it without a vacuum bag?

• 
  @orestwitiw2132 ай бұрын

  Awesome review! I just used my Makita 1219L for the first time and after a few cuts the sawdust was all over the saw! I hooked up a small shop vac to see if it would help control the dust and it did. Based on your review I will be buying the CT15 Mini because it looks like it will do everything that I want it to do better than a shop vac! I really like your tip on the Hose Garage and I’ll see how much it costs. Thanks for the great review from Northern Ontario. Oh and I liked and subscribed 👍

• 
  @robbrummer89672 ай бұрын

  Had a Makita LS 1018 L worst saw I ever bought. Makita customer service is non existent. No more Makita hence.

• 
  @alexanderrozumowski51802 ай бұрын

  What is the difference between KAPEX KSC 60 EB 5,0 I-UG-SET and 5,2 I-UG-SET?

• 
  @BuckRogers24912 ай бұрын

  Where are you seeing those? 5.0 and 5.2 would normally refer to the batteries. UG is likely the UG cart. I'm not seeing any reference to a saw + battery + cart combo. Saw + batteries + charger + systainer, yes.

• 
  @TheMasterkiller242 ай бұрын

  I sent you a message on Etsy...... I was try to ask if you had the adapters for the Makita 12 in 40V miter saw GSL04M1

• 
  @TheMasterkiller242 ай бұрын

  Hello nice videos... Do you guys have the Makita 12 inch 40v miter saw hose adapter..... I looked on your site did not see it

• 
  @mikeredhead28942 ай бұрын

  Good review brother. This is the saw I decided on and will be my next tool. Based on all my research this saw is outstanding,and beautiful also in my opinion. Thanks

• 
  @AnthonyBernhardt2 ай бұрын

  Maybe im missing something but the router itself isn't supported until you're on the workpiece. and well... you can't plunge. If you come in from the edge you're not going to be at 90 degrees unless you spend a Lot of time making an identical 'sacrifical' piece.. thats why they don't show you the product in use.. and if they do show they don't show the entrance into the cut its always off camera.....

• 
  @Micha_Ba3 ай бұрын

  Site of Utility rack can't be found 😢

• 
  @salvatorelauro73923 ай бұрын

  Please make an updated video. I recently purchased a ct15E. The description noted that it comes with a new anti-static hose. When I received it I was disappointed. I started to do some research and have found out it is anti-static. It does not have the braided sleeve. I’ve noticed it has caused a lot of confusion among the community, according to some peoples posts in different forums.

• 
  @duanekellen94274 ай бұрын

  I bought mine on eBay I also have 7 1/2” an 2-10” 18 volt all good

• 
  @datFUNKYb4 ай бұрын

  Where did you buy this? Does it have any "slop"?

• 
  @alexv.s.75164 ай бұрын

  Do you make an adapter for a aircat sander ?

• 
  @brandonsheaffer50354 ай бұрын

  How do you operate the right bevel? I see it advertised as dual bevel but couldn’t figure out how to right bevel a display model

• 
  @deannacorbettwhite14 ай бұрын

  Exactly what I wanted to know...if my Dewalt sander and Freud biscuit joiner would hook to the hose! Very hard to watch though, hooking camera to a tripod would want me to watch more of your videos.

• 
  @sawdustwoodchips5 ай бұрын

  The saw will run with one battery, but reduced power

• 
  @B15SDMDESIGNS5 ай бұрын

  can you remove the vac funnel attached to the head of the sander or is it permanently fixed?

• 
  @danahorton98415 ай бұрын

  You didn’t say anything about the bag !?! I’d love to hear your take.

• 
  @B15SDMDESIGNS5 ай бұрын

  I wish the 3M model had a shorter vac connector like the Mirka. Sometimes it can get in the way when you're sanding curved surfaces

• 
  @cloggedpitot15 ай бұрын

  Any thoughts on the KSC 60 now thats its out? Still stay with the makita 40v or are you going festool? From what I can tell the festool is around 10lbs lighter. The makita might have more blade options. Festool might have battery power issues in the long term. I dont care about price. Just quality.

• 
  @jtatro5 ай бұрын

  Just got mine in the mail. It has an additional clamp. What it for?

• 
  @JonDunnmusician5 ай бұрын

  Amazing video, my friend, you cover so many important details. Furthermore mention that you can easily cut your hand on the corner edge of those guide rails, so the caps are critical for many reasons , including your good point about scratching trucks!

• 
  @xlaller6 ай бұрын

  I really hate that the top handle locks is :(. I loved the 2nd generation.

• 
  @duanekellen94276 ай бұрын

  Had many 7-1/2” over years only problem is table wearing out after 5-10 k cuts

• 
  @m.a.r.services57206 ай бұрын

  Thanks

• 
  @remyremys57156 ай бұрын

  What's the Wight on it ?

• 
  @nattyikegerard53586 ай бұрын

  Too bad that router couldn’t take it three-quarter straight bit

• 
  @francoisbelangerboisclair6 ай бұрын

  The version shown in the video is an older model. They now make one with the same range as the Knipex 0.08 to 16mm. The model number is CP80001 (without ferrule) and CP94120 (with ferrule). They wrote SO 16-6on the crimping for reference.

• 
  @24revealer7 ай бұрын

  1:42 Put that in your miter saw and cut the bend end off.

• 
  @matthewwysocki50197 ай бұрын

  I have the 27mm hose and need 2.25” adapters. Do you have those available?

• 
  @svtrader7 ай бұрын

  Hey man, this or the Makita 40v XGT 8 1/2"?

• 
  @jeffpower64734 ай бұрын

  I second this question. I’m trying to decide between both

• 
  @jeewahassan8007 ай бұрын

  hello Madeline, vous faites la publicité de certaines marques et vous le faites bien et je vous fais confiance. J'aime bien vôtre façon de vous exprimer et vous êtes convaincantes et douces. Seulement cette marque Festool n'existe pas dans mon île. Je pense que je vais pouvoir trouver quelque chose de similaire d'une marque différente. En tous les cas lz fait de vous voir, de vous entendre me fait beaucoup de bien. Je crois que nous sommes compatible. Merci beaucoup pour les conseils et les démonstrations. Vous ne me quittez pas et je rêve de vous même les yeux ouverts. Vos vidéos m'intéressent énormément. Continuez à en produire d'autres.Merci Madeline, Ciao

• 
  @myoldhousefix7 ай бұрын

  @toolcurve I just bought a Festool Planex and CT36 Dust Extractor. Do you have an adapter from the 36mm black non link host to 27mm so I can use with the smaller Festools?

• 
  @ibitaRaptor8 ай бұрын

  You can run on 1 battery but on half speed/power.

• 
  @raymosteller34428 ай бұрын

  is there an adapter to hook up a 36mm Festool hose to a Bosch 9gal dust extractor?

• 
  @richardmckrell48998 ай бұрын

  Festool no longer offers the T-18 E with batteries. They gave up on the 'affordable' entry level drill option.

• 
  @dvntsmh8 ай бұрын

  Hey I made an order for your bosch lr32 plate, Was trying to get info on the status of my order but I have recieved no email reponse, if you all arent running can I get a refund?

• 
  @richardfischer19868 ай бұрын

  Makita has come out with a new saw with bigger cut compacety 40v LS008GZ 7 1/2. And LS009GZ 61/5 blade size

• 
  @XxMalabooo8 ай бұрын

  Now that you have this for a period of time; is it this or the makita? Still happy with it?

• 
  @HarveyJohnWillmott8 ай бұрын

  Have you tried the corded version? Is there a difference in power?

• 
  @markjarman78198 ай бұрын

  I bought this set in the uk and mine is all made in Germany it’s printed on everything.