I have 1 i bought for 400. Original owner said loxked up. Bent valve and new timing chain. She runs but keeps getting stuck in 4th gear . When it does it bends the triangle bearing on the left side. I have been inside several times .i see no reason for this to happen. Any ideas would be appreciated. I talked to a yamaha tec. He asked why 4th gear. Lmao if i knew that answer i would not have asked him. Thanks for the videos. I enjoyed them
@toddpetersen225114 күн бұрын
Need to add that it happened both times when down shifting
@toddpetersen225114 күн бұрын
Im here watching bought a 07 for 400. Replaced a bent valve ,and put new seals on also replaced timing chain . She fired runs good but keeps getting stuck in 4th gear . I did find the triangle bearing all bent . Replaced that and it happened again . Does anyone have any suggestions? Only thought i have is The idol might be too high. Or clutch adjustment but why does it only happen in 4th gear.
@jasonweishaupt182819 күн бұрын
Your mom can adopt me!
@mikemjw453320 күн бұрын
Warn out craftsman? Warranty claim?
@jimmythebeast827923 күн бұрын
I want to tour but I also want to get an MT07, thank you for this. You made it possible.
@jacobeparsels925124 күн бұрын
Your mom a real one
@TheFirstCause26 күн бұрын
I'm doing the same setup on my MT07 right now. All the bars and racks make the bike look amazing and add to the futuristic look (when the bags aren't on) and of course add crash protection for the bike. I'm adding a Givi Tracer 700 upper crash bar as well.
@andyspeedshop26 күн бұрын
I love the setup! I commute with it daily! Its almost a perfect bike.
@TheFirstCause26 күн бұрын
@@andyspeedshop your videos and the general look of your bike really helped me hone in on how I wanted my MT07 to look. I already liked the grey and cyan, but going with the GIVI bars over the typical angular stunt cages just looks better. The curvy look works better with the kind of organic lines of this bike. Thanks all the inspiration and install videos!
@djmidnightwolf26 күн бұрын
I am inheriting a 92 Quadrunner LT-160. Has sat for a few years. No gas cap. Was told tranny noise when last ran but did run. Going to be a fun project since it is a free quad.
@davethebarbarian573427 күн бұрын
Did you have a hard time lining out the holes on the mount to the holes on the winch? mine seems to be off a bit
@jollyshrimpo27 күн бұрын
Does the motec street rack come with all the tubing necessary to mount it to the bike? Every one I see online just shows the rack never the tubing
@andyspeedshop27 күн бұрын
Hard for me to remember as it’s been a while since I purchased all of it. I think that you may have to purchase the rack and the apparatus separately
@TheFirstCause29 күн бұрын
I've been installing these today on my MT07. I really like how they curve and bend with the organic looking bike vs the hard angular crash/stunt cages. But I can't get the left side done. The kickstand bolts are insane. I can't get them out. Basically stripped one of them trying to breaker bar it out. Nothing worked!
@tg8150Ай бұрын
Wouldn’t just buying a Tracer 9 GT be a lot more sensible? I mean all the $ you spent on that setup could’ve offset the difference a bit and you wouldn’t just lose it when you finally do dump the 07, which you will.
@andyspeedshopАй бұрын
My MT07 weighs in at less than 400lbs. I can do a 450 mile day easily (and just did) and for less money than a Tracer 9GT. Keep your overweight Tracer! I’ll keep my little MT 🤙🏽 - I clocked 13,000 miles on it last year - great bike!
@m.t.v.7934Ай бұрын
WOW! That is pretty cool that you can take your You Tube earnings and pay it forward to someone who might need it more. I know some of this stuff on the screen was not cheap, that Quinn master set is over $300 and the cart if not on sale is $279. Thanks for sharing this video and I hope you have success on You Tube.
@aussie-sebАй бұрын
Think this would fit on a 4x8 trailer?
@NamsuiАй бұрын
whats that phone mount called
@andyspeedshopАй бұрын
I made it
@jasonrojas2176Ай бұрын
Amazing man
@andystoolboxАй бұрын
Free labor.
@mr.ssswagg6617Ай бұрын
I Love Harbor Freight. Here's My Set Up. All Harbor Freight. kzread.info/dash/bejne/faqkvNRsorK2f6Q.htmlsi=lys3YjiKzDFB75tv
@thumboutdoors8277Ай бұрын
I will take a sticker
@Offroadboy-p71Ай бұрын
What year lt80 is that?
@andyspeedshopАй бұрын
1987 - first year of production
@geoffcollier8736Ай бұрын
Got one like this mostly in bits. Good recon engine. Dot know where cdi unit fits. I think on frame at front somewhere but under plastics. Can you help please?
@wellsfam7002 ай бұрын
You should my John Deere if you think that is dirty lol
@wb5mgr2 ай бұрын
Way to go Mom 💯
@emker77722 ай бұрын
I took my mt07 2021 from CA to Oregon and back to CA last year. My legs butt little sore but OK. This year, I am riding from Kentucky back to California. Good luck to me.
@tahoechris2 ай бұрын
Love it had a white blue red Suzuki letters on tank fast it was a 86 also GS1150E it was stolen 2 yrs after purchase never recovered HOPE THE BURN IN 🔥 🔥🔥
@christhetoolman2 ай бұрын
Man I would love to Win a tool cart for my garage at home
@eugenerussell85182 ай бұрын
How's the job going?
@andyspeedshop2 ай бұрын
It’s going great! Just passed my 2nd anniversary of starting here. Dream come true!
@spiderthenics94622 ай бұрын
You said you wanted this as a touring bike in the beginning of the video.Specially coming from a V Strom which has a more relaxed riding position as well as a windshield that actually works, how is this gonna work out ? Naked bike arent really popular for touring both because the riding position and the fact that above 100-110 miles the wind will become you nnumber one enemy.
@andyspeedshop2 ай бұрын
I’ve clocked 10,000 miles on it. It’s the most comfortable bike I’ve owned in 13 years. I don’t “tour” on interstates. I daily commute the bike. I should do a 10,000 mile review video…but this is the perfect bike (for me anyway)
@jimhofoss99822 ай бұрын
I like your tractor! I need a 2501, too…with a grapple to move 12’ logs to a bandsaw mill. nice property and toys, too! cheers from NW BC🇨🇦
@andyspeedshop2 ай бұрын
She’s the best and most used tool in my arsenal!
@goergejorgensen33942 ай бұрын
What kind of fuel does it take? Looking to get one shortly
@andyspeedshop2 ай бұрын
Just normal gasoline. No two stroke oil to mix on this one.
@justinhayward50273 ай бұрын
Win for mom!
@williamsigl4533 ай бұрын
The sockets look very impressive. I'll have to look into those!!
@Thatuptownguy3 ай бұрын
What are the tire specs?
@andyspeedshop3 ай бұрын
I can’t remember now. I sold it some time ago. I can tell you they were Polaris ACE 570 take-offs - if I remember correctly!
@kkeller51023 ай бұрын
Hope things turned out well at your new job. 10/10 setup BTW. 😊
@moparrdudee873 ай бұрын
First of! those are the parents who don’t stop supporting their kids even after they are grown! Blessed to be a child raised by parents like that. I get to pass down the support to my kids ❤
@davntelisha193 ай бұрын
And pay mom back momma
@davntelisha193 ай бұрын
Like Christmas
@coltonlynn28253 ай бұрын
If the zukes stock the 90s winning Ive had both, probably the 90
@toddhefer-en3kh3 ай бұрын
Praise God. Such a Blessing. Praise God. God Bless in Jesus Christ Name Amen.
@guillermoalmontes39893 ай бұрын
Boy said HAIL HITLER at around 12:18 😂
@TheRealJohnMadden3 ай бұрын
I’m strongly considering getting the 2023 or 2024 MT07. The dealership I’ve been getting bikes from always sells the bikes I buy for $7995 so I thought “why not just get a brand new bike at this point”. It’ll be odd going from the inline 4 sound that I know and love, but it’ll be nice knowing someone has never thrashed my bike. Also, I read in the owners manual that regular 86 is recommended, any reason you chose premium?
@ozzy10843 ай бұрын
Nice setup.. love the box.. but you need sum lights... Maybe a torque wrench.
@Driver7323 ай бұрын
Headphone users R.I.P halfway through video with loud music lol
@retro_grade3 ай бұрын
You should take some cues from 2Vintage and put something in the title like "SELLER SAID RAN WHEN PARKED". But one up him with the big capital letters and have a dropped mouth reaction face or something of that nature popping in the thumbnail. Big time views Andy! Are you sure you can trust that shop service manager to rebuild that crank properly? Make sure he's actually worked on stuff before and isn't just some big talking paper pusher before you give it to him :) That is some carnage, was really hoping that this one would just be a wash, battery, and carb clean! Never easy in the used ATV market LOL.
@retro_grade3 ай бұрын
This is what I came here for! Watching the years worth of barn dust being blasted off that machine to reveal the minty freshness underneath is sooooo satisfying! Loved the detailed photo shots beforehand also. I'm suprised this video hasn't received more views. Pro detailers in the car world post shorts and videos like this all the time that get tons of hits!
Пікірлер
GLAD to see the FUEL TANK AGAIN💪
Such skill!!
Well there goes my kids college fund. Nice
Looks good 👍
I have 1 i bought for 400. Original owner said loxked up. Bent valve and new timing chain. She runs but keeps getting stuck in 4th gear . When it does it bends the triangle bearing on the left side. I have been inside several times .i see no reason for this to happen. Any ideas would be appreciated. I talked to a yamaha tec. He asked why 4th gear. Lmao if i knew that answer i would not have asked him. Thanks for the videos. I enjoyed them
Need to add that it happened both times when down shifting
Im here watching bought a 07 for 400. Replaced a bent valve ,and put new seals on also replaced timing chain . She fired runs good but keeps getting stuck in 4th gear . I did find the triangle bearing all bent . Replaced that and it happened again . Does anyone have any suggestions? Only thought i have is The idol might be too high. Or clutch adjustment but why does it only happen in 4th gear.
Your mom can adopt me!
Warn out craftsman? Warranty claim?
I want to tour but I also want to get an MT07, thank you for this. You made it possible.
Your mom a real one
I'm doing the same setup on my MT07 right now. All the bars and racks make the bike look amazing and add to the futuristic look (when the bags aren't on) and of course add crash protection for the bike. I'm adding a Givi Tracer 700 upper crash bar as well.
I love the setup! I commute with it daily! Its almost a perfect bike.
@@andyspeedshop your videos and the general look of your bike really helped me hone in on how I wanted my MT07 to look. I already liked the grey and cyan, but going with the GIVI bars over the typical angular stunt cages just looks better. The curvy look works better with the kind of organic lines of this bike. Thanks all the inspiration and install videos!
I am inheriting a 92 Quadrunner LT-160. Has sat for a few years. No gas cap. Was told tranny noise when last ran but did run. Going to be a fun project since it is a free quad.
Did you have a hard time lining out the holes on the mount to the holes on the winch? mine seems to be off a bit
Does the motec street rack come with all the tubing necessary to mount it to the bike? Every one I see online just shows the rack never the tubing
Hard for me to remember as it’s been a while since I purchased all of it. I think that you may have to purchase the rack and the apparatus separately
I've been installing these today on my MT07. I really like how they curve and bend with the organic looking bike vs the hard angular crash/stunt cages. But I can't get the left side done. The kickstand bolts are insane. I can't get them out. Basically stripped one of them trying to breaker bar it out. Nothing worked!
Wouldn’t just buying a Tracer 9 GT be a lot more sensible? I mean all the $ you spent on that setup could’ve offset the difference a bit and you wouldn’t just lose it when you finally do dump the 07, which you will.
My MT07 weighs in at less than 400lbs. I can do a 450 mile day easily (and just did) and for less money than a Tracer 9GT. Keep your overweight Tracer! I’ll keep my little MT 🤙🏽 - I clocked 13,000 miles on it last year - great bike!
WOW! That is pretty cool that you can take your You Tube earnings and pay it forward to someone who might need it more. I know some of this stuff on the screen was not cheap, that Quinn master set is over $300 and the cart if not on sale is $279. Thanks for sharing this video and I hope you have success on You Tube.
Think this would fit on a 4x8 trailer?
whats that phone mount called
I made it
Amazing man
Free labor.
I Love Harbor Freight. Here's My Set Up. All Harbor Freight. kzread.info/dash/bejne/faqkvNRsorK2f6Q.htmlsi=lys3YjiKzDFB75tv
I will take a sticker
What year lt80 is that?
1987 - first year of production
Got one like this mostly in bits. Good recon engine. Dot know where cdi unit fits. I think on frame at front somewhere but under plastics. Can you help please?
You should my John Deere if you think that is dirty lol
Way to go Mom 💯
I took my mt07 2021 from CA to Oregon and back to CA last year. My legs butt little sore but OK. This year, I am riding from Kentucky back to California. Good luck to me.
Love it had a white blue red Suzuki letters on tank fast it was a 86 also GS1150E it was stolen 2 yrs after purchase never recovered HOPE THE BURN IN 🔥 🔥🔥
Man I would love to Win a tool cart for my garage at home
How's the job going?
It’s going great! Just passed my 2nd anniversary of starting here. Dream come true!
You said you wanted this as a touring bike in the beginning of the video.Specially coming from a V Strom which has a more relaxed riding position as well as a windshield that actually works, how is this gonna work out ? Naked bike arent really popular for touring both because the riding position and the fact that above 100-110 miles the wind will become you nnumber one enemy.
I’ve clocked 10,000 miles on it. It’s the most comfortable bike I’ve owned in 13 years. I don’t “tour” on interstates. I daily commute the bike. I should do a 10,000 mile review video…but this is the perfect bike (for me anyway)
I like your tractor! I need a 2501, too…with a grapple to move 12’ logs to a bandsaw mill. nice property and toys, too! cheers from NW BC🇨🇦
She’s the best and most used tool in my arsenal!
What kind of fuel does it take? Looking to get one shortly
Just normal gasoline. No two stroke oil to mix on this one.
Win for mom!
The sockets look very impressive. I'll have to look into those!!
What are the tire specs?
I can’t remember now. I sold it some time ago. I can tell you they were Polaris ACE 570 take-offs - if I remember correctly!
Hope things turned out well at your new job. 10/10 setup BTW. 😊
First of! those are the parents who don’t stop supporting their kids even after they are grown! Blessed to be a child raised by parents like that. I get to pass down the support to my kids ❤
And pay mom back momma
Like Christmas
If the zukes stock the 90s winning Ive had both, probably the 90
Praise God. Such a Blessing. Praise God. God Bless in Jesus Christ Name Amen.
Boy said HAIL HITLER at around 12:18 😂
I’m strongly considering getting the 2023 or 2024 MT07. The dealership I’ve been getting bikes from always sells the bikes I buy for $7995 so I thought “why not just get a brand new bike at this point”. It’ll be odd going from the inline 4 sound that I know and love, but it’ll be nice knowing someone has never thrashed my bike. Also, I read in the owners manual that regular 86 is recommended, any reason you chose premium?
Nice setup.. love the box.. but you need sum lights... Maybe a torque wrench.
Headphone users R.I.P halfway through video with loud music lol
You should take some cues from 2Vintage and put something in the title like "SELLER SAID RAN WHEN PARKED". But one up him with the big capital letters and have a dropped mouth reaction face or something of that nature popping in the thumbnail. Big time views Andy! Are you sure you can trust that shop service manager to rebuild that crank properly? Make sure he's actually worked on stuff before and isn't just some big talking paper pusher before you give it to him :) That is some carnage, was really hoping that this one would just be a wash, battery, and carb clean! Never easy in the used ATV market LOL.
This is what I came here for! Watching the years worth of barn dust being blasted off that machine to reveal the minty freshness underneath is sooooo satisfying! Loved the detailed photo shots beforehand also. I'm suprised this video hasn't received more views. Pro detailers in the car world post shorts and videos like this all the time that get tons of hits!