Пікірлер

• 
  @IrenESorius13 сағат бұрын

  👍‍‍🌟👍‍‍

• 
  @beamecho989815 сағат бұрын

  Does this destroy the paint around the rusted area ?

• 
  @justahandchannel7 сағат бұрын

  It can discolor it.

• 
  @jsmythib2 күн бұрын

  Is the hand sanitizer used to break surface tension to get better penetration into the material? :) Your thumbnail was exactly the idea I was looking for. Everything I have found suggests 30% on the top side. Salute, 60% :) No screwing around lol Thanks for the demo.

• 
  @justahandchannel2 күн бұрын

  Ethyl alcohol is used as a solvent.

• 
  @IrenESorius2 күн бұрын

  👍‍‍🌟👍‍‍

• 
  @jimcarlson17813 күн бұрын

  is this what they dip cars into when restoring?

• 
  @justahandchannel3 күн бұрын

  I believe they use sodium hydroxide, which also removes body filler and paint. That chemical definitely needs to be neutralized. Most professionals do not acid dip their car because there are many disadvantages to doing so

• 
  @MrMqwse4 күн бұрын

  No

• 
  @KylaLander4 күн бұрын

  no

• 
  @SidneyOlleJr4 күн бұрын

  Beautiful job! Smart guy and thank you for sharing with all of us!!!🙂👍👍♥

• 
  @justahandchannel4 күн бұрын

  Thanks. You're welcome

• 
  @BlacknRedSN954 күн бұрын

  awesome video dude ty

• 
  @justahandchannel4 күн бұрын

  Thanks. I'm happy to share

• 
  @Oli.Bacon164 күн бұрын

  good video

• 
  @justahandchannel4 күн бұрын

  It got the car working again 😆 there's no roadside assistance here. You're on your own.

• 
  @ericarbo50442 күн бұрын

  That sounds like where Im from. Can only call someone close by for a boost if needed. Or if it’s a standard , push it fast enough to get back in and put it in gear and let the clutch out to turn the engine. Don’t forget to put the key on first. But that’s a great idea. The only danger I see is overcharging.

• 
  @justahandchannel2 күн бұрын

  @ericarbo5044 I haven't seen booster cables anywhere in this country. It's an automatic. I don't see it possible to overcharge because the charger is only 12v at a low amperage. You would have to forget you were charging it for a couple days.

• 
  @AlexJonesWasRight17764 күн бұрын

  just save yourself time and buy RustMort from an autobody supply shop the stuff works in 5 min and ntraliz4es rust into a black gel completely eats rust and destroys it on a molecular level.

• 
  @ng-marc5 күн бұрын

  Well done! Thank you

• 
  @justahandchannel5 күн бұрын

  You're welcome

• 
  @bartwieden5 күн бұрын

  Great heads up on some significant money savings.

• 
  @justahandchannel5 күн бұрын

  I'm glad to help

• 
  @johnr55456 күн бұрын

  Thanks god bless

• 
  @justahandchannel6 күн бұрын

  You too!

• 
  @OverlandOne6 күн бұрын

  Well done. Thanks for this information.

• 
  @justahandchannel6 күн бұрын

  You're welcome!

• 
  @K_Shea6 күн бұрын

  Looks really good, as another said, the cream cheese is a new one. Pizza is our friend🥰

• 
  @justahandchannel6 күн бұрын

  It's so good!

• 
  @berendh.27457 күн бұрын

  Hallo, Thank you for this great video. Do you know if i can also use 75% phosphoric acid and hand sanitizer with 70% isopropanol alcohol? greetings, Ben

• 
  @justahandchannel7 күн бұрын

  Hi Ben. You're welcome. I recommend using ethyl alcohol for best results

• 
  @berendh.27456 күн бұрын

  Thanks for your advice. I ordered it. Greetings from the Netherlands where everything rusts near the coast 😢

• 
  @frankammirati33857 күн бұрын

  That’s it I’m going to the Philippians .

• 
  @justahandchannel7 күн бұрын

  You want pizza? 😆

• 
  @BengtSvensson-mt9fy8 күн бұрын

  Now I want to eat pizza😅 Looks great👌

• 
  @justahandchannel8 күн бұрын

  Come on over for a slice, we have some left. 😄

• 
  @jonfranklin93618 күн бұрын

  Looks great! Crème cheese on pizza? Have to try that. Thanks for sharing

• 
  @justahandchannel8 күн бұрын

  It's actually really good. You're welcome

• 
  @Larry-fo2cw8 күн бұрын

  You have a beautiful family.

• 
  @justahandchannel8 күн бұрын

  Thank you so much. I love them to pieces

• 
  @thisisyourcaptainspeaking22598 күн бұрын

  I agree, humidity is likely the culpret. Interesting vehicle, I've never seen one.

• 
  @justahandchannel8 күн бұрын

  It's a Japanese mini van made by Daihatsu. It is a glorified golf cart 😆

• 
  @thisisyourcaptainspeaking22598 күн бұрын

  @@justahandchannel I remember we didn't think much of VW buses at one time but today they're sought after and bring a high price. Might not ever happen with the Japanese minivans but something about them interests me, lol. ;)

• 
  @justahandchannel8 күн бұрын

  They seem to be becoming a trend in north america. Here they are plentiful. I went from driving an escalade to this, so it's quite an adjustment 😆

• 
  @dcguenter8 күн бұрын

  I had the same problem here in Canada with one headlight I had replaced with a salvage yard yellowed headlight. I sprayed a rattle can clear I had on hand, after spraying I had the same result as you (didn't know about the heat gun trick!). Looked at the can and noticed it said nothing about being "plastic" friendly as the other clears I have used on headlights in the past. I guessed that was the issue and ended up re-sanding and spraying with plastic friendly clear.

• 
  @justahandchannel8 күн бұрын

  I think the humidity caused it. It's so hot and sticky here, so I used a heat gun to get rid of it.

• 
  @Em22-wtf10 күн бұрын

  Lol, Im looking for a magic spray that will CAUSE rust! ;)

• 
  @justahandchannel10 күн бұрын

  To achieve the desired result, kindly combine 4 cups of hydrogen peroxide, 4 tablespoons of vinegar, and 1 tablespoon of salt. The mixture will react almost immediately.

• 
  @waynecrofts79549 күн бұрын

  I can recommend a number of towns in the North East of England that'll achieve a similar result in no time!

• 
  @drgreenthumb998412 күн бұрын

  That’s awesome man.

• 
  @justahandchannel12 күн бұрын

  Thanks!

• 
  @drgreenthumb998412 күн бұрын

  That’s awesome man.. so after the 24 hours do you take any type of sanding or grinding or even washing before primer ?

• 
  @justahandchannel12 күн бұрын

  None of that is necessary. You are ready to spray primer.

• 
  @drgreenthumb998412 күн бұрын

  @@justahandchannel thanks for the tip man.. I have been under my 70 charger project slaving away with a grinder/wire brush etc. but I just ordered some of the supply to make your recipe for rust reformer.. so I imagine any scales or anything like dirt needs to come off before application or will enough product just make it run off?

• 
  @justahandchannel12 күн бұрын

  @drgreenthumb9984 I recommend removing any loose scale from the surface. If the dirt is caked on, I suggest cleaning it as thoroughly as possible before proceeding. The more preparation you do, the better the final outcome will be.

• 
  @drgreenthumb998412 күн бұрын

  @@justahandchannel thank you man.. I’ll let you know how it goes!!

• 
  @Harry-kw1fy16 күн бұрын

  I am advised by another youtuber - someone who has used this for years in a commercial operation, so perhaps every week - the concentration of phosphoric works better if it is 8 - 12 percent. This is because you need Hydrogen ions in the water to be added and free moving, for maximum efficiency. This affects greatly the reaction that takes place. Cut the phosphoric with water - adding the acid to the water not the other way round. And - do NOT wash off with water. The only acid you don't remove with water - the acid binds to the surface and protects. Be particularly careful if considering applying to threads and springs.

• 
  @justahandchannel16 күн бұрын

  I concur that exposure to oxygen is essential, however, the concentration of acid does not directly influence the level of oxygen exposure achieved. This assertion lacks logical basis. While dilution may be attempted, for optimal outcomes in the treatment of severe rust, I recommend adhering to my prescribed method.

• 
  @lesliecofresi424517 күн бұрын

  Can it be used on painted parts thar are starting to show some rust? Will it damage paint?

• 
  @justahandchannel17 күн бұрын

  It can discolor paint. What is your plan after? It would be best to isolate the affected area and seal it up with epoxy then paint

• 
  @neilfixes550117 күн бұрын

  As a shipwright, Phosphoric acid is indispensible. Thanks for laying out the proportions for first-timers. I have not heard of the ethanol addition before.... I will try it out. I have found that a coat of undiluted Phos overnight will actually dissolve rust without the severe pitting caused by HCl. It will leave a sticky residue which I wash off with hot water and air-dry. I then recoat with 1:2 Phos solution and let that airdry. This leaves a whitish powdery coating (the iron phosphate) which is protective, so dont wipe it off. This can then be paint-primed, or be sealed with epoxy. I am keen to see what the ethanol adds.... speeds up the air-drying🤔? Thanks for this neat video. There are a million rust-cure you-tubes, but yours is straight to the point, and I know it works.

• 
  @kinangeagle13318 күн бұрын

  Lmao i’ve seen most of these cars on the internet since i have cumulative 300 hours spent on FB marketplace

• 
  @justahandchannel18 күн бұрын

  You are very dedicated to your hobby.

• 
  @EamonnMurphy-cc1dt18 күн бұрын

  If it rains after you apply the acid, do you need to re-acid before painting?

• 
  @justahandchannel18 күн бұрын

  Not necessarily. If you are going to seal it with epoxy, then a little bit of flash rusting won't matter

• 
  @EamonnMurphy-cc1dt18 күн бұрын

  @@justahandchannel My latest intention is to put acid in the morning then rinse with water, then let dry in the Thailand heat for an hour or two, then apply primer(spray can)

• 
  @justahandchannel17 күн бұрын

  @@EamonnMurphy-cc1dt no need to rinse. Just Make sure you don't leave any pools of acid on top surfaces

• 
  @EamonnMurphy-cc1dt16 күн бұрын

  @@justahandchannel lol, I already put the acid this morning. I left it an hour then rinsed with water and let dry for a while. Unfortunately, most of it now has a light sheet rust again, even though it's quite warm and dry. I will have to acid again tomorrow morning and just paint over it within an hour or two. Better the acid than the rust underneath 🤗

• 
  @justahandchannel16 күн бұрын

  Don't paint for 24 hours after applying acid.

• 
  @klatt405718 күн бұрын

  Good idea. He seemed like a successful business man.

• 
  @justahandchannel5 күн бұрын

  H3 has a very nice restaurant established in 1969. Great guy!

• 
  @rustymachineshop945618 күн бұрын

  Have you treated metal and painted it and kept the metal for five or ten years to see if any paint has started to peel or blister or anything just asking don't want to paint my truck and later all the paint comes off not trying to say your wrong or this won't work I like this ideal thanks

• 
  @justahandchannel5 күн бұрын

  I have been using this method for many years with no issues whatsoever.

• 
  @rustymachineshop94565 күн бұрын

  @@justahandchannel thanks for the reply

• 
  @justahandchannel5 күн бұрын

  I would have replied much sooner, but I didn't see Your message until now. Somehow it slipped past me

• 
  @timkerr790118 күн бұрын

  Wow what are the odds a blazer being there

• 
  @justahandchannel18 күн бұрын

  I think I found the only one 😆

• 
  @klatt405719 күн бұрын

  Does he have any older American cars / trucks ?

• 
  @justahandchannel18 күн бұрын

  He has a few but I only focused on what he was willing to show us

• 
  @klatt405719 күн бұрын

  The impala would be a good project car.

• 
  @justahandchannel5 күн бұрын

  It needs alot of love

• 
  @klatt405719 күн бұрын

  Is he selling the 74 Ford F100?

• 
  @justahandchannel19 күн бұрын

  No, that's his baby he plans to keep

• 
  @klatt405719 күн бұрын

  @justahandchannel ... nice truck, would be nice to have.

• 
  @alanconner851419 күн бұрын

  Gave me anxiety watching the dog near your sample 😳

• 
  @justahandchannel19 күн бұрын

  It wouldn't hurt her even if she made contact with it.

• 
  @jonfranklin936119 күн бұрын

  I like that Impala. ❤ Blazer is nice, sounded funny when it was running. Thanks for sharing.

• 
  @justahandchannel19 күн бұрын

  I'm not sure if I the impala is worth building. I kind of like it too. The Blazer...You're right, it's running rich because it has a throttle body issue, but also it sounds like it has a lifter noise.

• 
  @allancox145719 күн бұрын

  The javelin didn't look to bad.

• 
  @justahandchannel19 күн бұрын

  He doesn't want to sell that 1

• 
  @RedHotFiat20 күн бұрын

  Happy Anniversary! Beautiful place.

• 
  @justahandchannel20 күн бұрын

  Thank you!

• 
  @carlric20 күн бұрын

  Great info! subscribed

• 
  @justahandchannel20 күн бұрын

  Thanks!

• 
  @garyscarstuff21 күн бұрын

  Great tip, thanks! I'm close to spraying my second prime on my 40 Ford, then block out, final prime and paint. I'll certainly use this to make sure everythng is straight.

• 
  @justahandchannel20 күн бұрын

  It's great to see it come together. You're welcome!

• 
  @robertfleming582921 күн бұрын

  Ranchero?

• 
  @justahandchannel21 күн бұрын

  1973 Plymouth GTX

• 
  @laserfalcon21 күн бұрын

  Did similar spray under my car when i replaced a subframe, worked well

• 
  @justahandchannel21 күн бұрын

  That's great!

• 
  @laserfalcon21 күн бұрын

  @@justahandchannel my only regret was it dripped on to a concrete floor and the acid did a number on it

• 
  @justahandchannel21 күн бұрын

  Phosphoric acid is also used as concrete etcher, So that doesn't surprise me. You must have had a coating on it because it wouldn't hurt the concrete if it was bare

• 
  @tracyfisher624422 күн бұрын

  That’s Super Cool! Thanks

• 
  @justahandchannel21 күн бұрын

  You're welcome!

• 
  @TroubledTimes202422 күн бұрын

  Would not refer to it as derusting but it is certainly excellent information how to convert rust so it does not continue further.

• 
  @justahandchannel22 күн бұрын

  Rust is a form of iron oxide. When you apply phosphoric acid, the chemical composition of the metal transforms into iron phosphate. If the process is executed correctly, the resulting substance is no longer iron oxide. Consequently, the remaining material can be considered rust free.

• 
  @allanthomson463923 күн бұрын

  I need to clean out my vintage LDV fuel tank thats 53years old and was wondering how+many thanks

• 
  @justahandchannel23 күн бұрын

  You're welcome!

• 
  @allanthomson463923 күн бұрын

  thank you

• 
  @justahandchannel23 күн бұрын

  You're welcome!

• 
  @GodandGears24 күн бұрын

  Thanks for the rust removal tips!👍🏽

• 
  @justahandchannel24 күн бұрын

  No problem 👍

• 
  @GodandGears24 күн бұрын

  Great video! Just subbed you! I have some catching up to do on your videos! Thanks for sharing!👍🏽

• 
  @justahandchannel24 күн бұрын

  Thanks for subscribing!