Do you have a link or contact for the throttle bracket? Definitely like that set up
@nicholassmith2353Ай бұрын
Where did you get the AN banjo bolt fitting for the injection pump overflow? I've been looking and haven't been able to source one yet!
@ianmcculloch8763Ай бұрын
Aren’t there screws that would need to go through the area you upholstered to re-attach the panel to the door? Mine does but it may have been a repair job prior.
@Countrykid07Ай бұрын
I love this rig
@jacklacy6492Ай бұрын
That’s sick, I’ve seen that guy rolling around town
@Cberry00362 ай бұрын
You find out what the throttle cable bracket is made by thanks
@erinthomas87462 ай бұрын
I LOVE THIS SOUND
@ChaseRubbins3 ай бұрын
Mk
@derrickthompson28943 ай бұрын
I see lots of money here 🔥
@Scott_Buchanan3 ай бұрын
Good info!
@rocklanddale86463 ай бұрын
INSTEAD OF JB WELD A TRUE SILVER SOLDER LIKE FOR HVAC SYSTEMS
@krypttoenight99713 ай бұрын
I like that fabric, cool ideal. Do you have a link to the material? Thanks
@tacosturbosandtoothpicks45124 ай бұрын
Welds over everything 🙌 love the build
@motofish3124 ай бұрын
YOU AND HOW MANY MILLION OTHERS???? NOT ANOTHER USELESS 12 VALVE VIDEO!!!!!???!!?!?!?... KILL ME NOW!!!!...
@littleredridinghood56224 ай бұрын
That's not even close to 700hp until you give sizes of turbos , most of that stuff is just fancy ad-ons ..
@Pb_24v4 ай бұрын
I shouldn’t even be taking time out of day to respond to you but it had 475/464 compound set up on it. Thanks for your input
@AustinHill-bx1uw4 ай бұрын
Where did you get the throttle cable bracket?
@lucaspita9584 ай бұрын
Still got that roller? Bought a 3rd 09 and found that the frame was cracked behind the thank. Looking for a roller
@Pb_24v4 ай бұрын
Sold it. Sorry
@deanklopp32424 ай бұрын
what axles are you running if you dont mind me asking
@Pb_24v4 ай бұрын
It’s on a 3rd gen chassis so factory AAM axles
@deanklopp32424 ай бұрын
i thought so, kind of doing the same thing with my 79. Thanks! @@Pb_24v
@josephjporcellijr45084 ай бұрын
I’m working on mine too I’m going to lower mine down too
@SSSpmarg4 ай бұрын
The Humvee will start tomorrow I will send you a video
@Pb_24v4 ай бұрын
Did you get it going?
@bobbyolson46164 ай бұрын
Could you take a picture of the injection pump build sheet? Thanks!
@ngelemental22744 ай бұрын
is that a 12 valve that you swapped to common rail? or is it a common rail engine u put in the truck
@burnemtoearnem4 ай бұрын
if i remember right its a full first gen body on a 3rd gen chassis
@CaleBane4 ай бұрын
You should make a video about the coolant leak 👍 I have a friend with the same problem, we’re out of ideas
@Pb_24v4 ай бұрын
It ended up just being slightly loose. I got the slightest tweak out of it and it’s been fine
@hankclingingsmith87074 ай бұрын
Why would you put the fuel tank in bed. Seems really dumb
@Pb_24v4 ай бұрын
You’re right. I should fix that for you.
@brandonpropterhoc4 ай бұрын
what year is your truck> and is it a 3/4 ton 1/2 ton? I am wanting to swap a diesel into my 89 Dodge 150 Ramcharger and would like to know what all mods/cuts/welds etc i would need to do.
@Pb_24v4 ай бұрын
It’s a 1990 1/2 ton body on a 2003 dodge 2500 chassis.
Welds are definitely the move! The truck looks so good.
@Pb_24v5 ай бұрын
Thank you!
@fabianflax74825 ай бұрын
That looks really good!
@sammyvanede24475 ай бұрын
love the truck man looks good
@jacklacy64925 ай бұрын
Dude this looks great! I’m ready to see it run!
@IT-FITZ-135 ай бұрын
I love these trucks and I love this song
@todaguilar20045 ай бұрын
*Promosm* 💕
@redfuel6bt6 ай бұрын
Do you have any videos on swapping the 1st gen body on your 2nt gen frame?
@joelmitchell84486 ай бұрын
Epic
@dawson_c19526 ай бұрын
Badass
@richardsix32956 ай бұрын
where did you get the air intake or do you have a part number thanks. the build looks awesome.
@Pb_24v6 ай бұрын
If you’re talking about the intake horn, it was just an Amazon special
@Pb_24v4 ай бұрын
The intake is from wherli
@kr4dh4x0r6 ай бұрын
But have you got quite a bit of requests to not film vertical videos?
@Pb_24v6 ай бұрын
Watch all my videos after this one bud
@kr4dh4x0r6 ай бұрын
@@Pb_24v I'm guessing this means that you did get some comments about it and started filming horizontally.
@decentgarage6 ай бұрын
Super helpful video dude! This is on my list for sure
@Pb_24v6 ай бұрын
Thank you! Glad it was useful.
@davidzigrang79246 ай бұрын
The door panel look nice I did my panels and headliner in dark tan Cordura my seat covers are being made by Marathon in Bozeman Montana they are dark tan and coffee thanks David
@decentgarage6 ай бұрын
That's looks awesome! I wish someone made a similar monitor for the 12 valve.
@Pb_24v6 ай бұрын
Thanks! And that would be really nice. You could always wire up a Holley system but obviously that’s a lot more involved
@infernoking75046 ай бұрын
210 hp is enough for me
@ALAKRANCONYAKI6 ай бұрын
Can you do a walk around of the truck? PLEASE!! 🔥🔥🔥🔥🔥🔥
@korn1116856 ай бұрын
Interested in doing this on a 2nd gen.
@jacklacy64926 ай бұрын
That’s super clean
@JRasS147 ай бұрын
Catch can is cool, and the drain I thought about but is don’t you want something vented?
@Pb_24v7 ай бұрын
The catch can itself is vented by leaving one of the caps open. On my new engine, I have a 180 degree fitting to vent it straight to the ground.
@KDrapsag7 ай бұрын
Heck yeah man awesome job! Excellent detail!
@user-qc9zm3rp2g7 ай бұрын
Where did you get your belt to run without ac compressor?
@Pb_24v6 ай бұрын
Parts store
@user-qc9zm3rp2g7 ай бұрын
Where did you get your belt to run without ac compressor?
Пікірлер
Do you have a link or contact for the throttle bracket? Definitely like that set up
Where did you get the AN banjo bolt fitting for the injection pump overflow? I've been looking and haven't been able to source one yet!
Aren’t there screws that would need to go through the area you upholstered to re-attach the panel to the door? Mine does but it may have been a repair job prior.
I love this rig
That’s sick, I’ve seen that guy rolling around town
You find out what the throttle cable bracket is made by thanks
I LOVE THIS SOUND
Mk
I see lots of money here 🔥
Good info!
INSTEAD OF JB WELD A TRUE SILVER SOLDER LIKE FOR HVAC SYSTEMS
I like that fabric, cool ideal. Do you have a link to the material? Thanks
Welds over everything 🙌 love the build
YOU AND HOW MANY MILLION OTHERS???? NOT ANOTHER USELESS 12 VALVE VIDEO!!!!!???!!?!?!?... KILL ME NOW!!!!...
That's not even close to 700hp until you give sizes of turbos , most of that stuff is just fancy ad-ons ..
I shouldn’t even be taking time out of day to respond to you but it had 475/464 compound set up on it. Thanks for your input
Where did you get the throttle cable bracket?
Still got that roller? Bought a 3rd 09 and found that the frame was cracked behind the thank. Looking for a roller
Sold it. Sorry
what axles are you running if you dont mind me asking
It’s on a 3rd gen chassis so factory AAM axles
i thought so, kind of doing the same thing with my 79. Thanks! @@Pb_24v
I’m working on mine too I’m going to lower mine down too
The Humvee will start tomorrow I will send you a video
Did you get it going?
Could you take a picture of the injection pump build sheet? Thanks!
is that a 12 valve that you swapped to common rail? or is it a common rail engine u put in the truck
if i remember right its a full first gen body on a 3rd gen chassis
You should make a video about the coolant leak 👍 I have a friend with the same problem, we’re out of ideas
It ended up just being slightly loose. I got the slightest tweak out of it and it’s been fine
Why would you put the fuel tank in bed. Seems really dumb
You’re right. I should fix that for you.
what year is your truck> and is it a 3/4 ton 1/2 ton? I am wanting to swap a diesel into my 89 Dodge 150 Ramcharger and would like to know what all mods/cuts/welds etc i would need to do.
It’s a 1990 1/2 ton body on a 2003 dodge 2500 chassis.
Which harness did you use
So the harness comes with a obd2 port
Yes and it’s a standalone harness from firepunk
where can i get the cummins throttle bracket?
kzread.info/dash/bejne/fqefzsmPgLrJYaw.htmlsi=g8aRu5MByMbZRJTG
Welds are definitely the move! The truck looks so good.
Thank you!
That looks really good!
love the truck man looks good
Dude this looks great! I’m ready to see it run!
I love these trucks and I love this song
*Promosm* 💕
Do you have any videos on swapping the 1st gen body on your 2nt gen frame?
Epic
Badass
where did you get the air intake or do you have a part number thanks. the build looks awesome.
If you’re talking about the intake horn, it was just an Amazon special
The intake is from wherli
But have you got quite a bit of requests to not film vertical videos?
Watch all my videos after this one bud
@@Pb_24v I'm guessing this means that you did get some comments about it and started filming horizontally.
Super helpful video dude! This is on my list for sure
Thank you! Glad it was useful.
The door panel look nice I did my panels and headliner in dark tan Cordura my seat covers are being made by Marathon in Bozeman Montana they are dark tan and coffee thanks David
That's looks awesome! I wish someone made a similar monitor for the 12 valve.
Thanks! And that would be really nice. You could always wire up a Holley system but obviously that’s a lot more involved
210 hp is enough for me
Can you do a walk around of the truck? PLEASE!! 🔥🔥🔥🔥🔥🔥
Interested in doing this on a 2nd gen.
That’s super clean
Catch can is cool, and the drain I thought about but is don’t you want something vented?
The catch can itself is vented by leaving one of the caps open. On my new engine, I have a 180 degree fitting to vent it straight to the ground.
Heck yeah man awesome job! Excellent detail!
Where did you get your belt to run without ac compressor?
Parts store
Where did you get your belt to run without ac compressor?