Norton Abrasives EMEA

Norton Abrasives EMEA

We are global experts in abrasives. Our videos will show you everything from weld removal to headlight restoration, and even how to upcycle scrap metal into something really cool; all using our abrasives. Norton Abrasives have been a global leader in the industry for almost 130 years and the brand is synonymous with cutting, grinding, blending, finishing and polishing. Our channel showcases one of the widest and most diverse product portfolios around, spanning everything from diamond blades to masonry saws, from tile saws to cutting discs; just sit back and watch our things cut and grind stuff.

Sound interesting? Please subscribe to our channel today!
We're also continually uploading new videos and improving our existing ones, so you'll never be bored.
Visit www.nortonabrasives.com to find out more!

Пікірлер

  • @mukeshjain6400
    @mukeshjain64006 күн бұрын

    🙏🏻🙏🏻🙏🏻👍👍

  • @ChenMartin-wh6zj
    @ChenMartin-wh6zj6 күн бұрын

    Excellent,want OEM cuting disc ?contact me .

  • @chcemisieChce
    @chcemisieChce7 күн бұрын

    With stainless steel standing Mig?

  • @mukeshjain6400
    @mukeshjain64008 күн бұрын

    👍

  • @hornosyasadores
    @hornosyasadores10 күн бұрын

    Para todos los que preguntan por los reactivos Para la prueva en un mililitro de aceite usado. Utilice diez mililitros de alcohol que seria la solucion a isopropilico al 99% de puresa y dos gotas de fenoftaleina y en un recipiente con medicion en decimas de mililitros o en mililitros agitela vigurosamente La solucion b la conseguira en un litro de agua destilada con un gramo de sosa caustica al 99 % ybien diluida de esa solucion tome con un cuenta gotas en de dos decimos de mililitros segun las gotas que necesite las contara hasta que al remover se aga un color magenta y segun los mililitros que se lleve le aumentara a la tabla de 3.5 gramos por litro que lleva el aceite puro por cada mililitro si fesen 2.4 mililitros mas ud agregara 2.4 gramos a los 3.5 por litro 6 gramos de lejia por litro serian 885 gramos por 20 litros de metanol para 100 litros de aceite

  • @stanhill3980
    @stanhill398012 күн бұрын

    Your playing stupid music again

  • @FirstResponderHope
    @FirstResponderHope12 күн бұрын

    Perfect, thank you that solves the mystery of which direction to mount the blade. Thank you.

  • @Taylor1750
    @Taylor175012 күн бұрын

    U Jp

  • @gabrielnieto4118
    @gabrielnieto411815 күн бұрын

    Nooooo mi ricordo cero anche io

  • @GW2_Live
    @GW2_Live16 күн бұрын

    Thick disks suck for any home use, I accidentally bought thick disks and they take a decade to cut even mild steel, very frustrating.

  • @AnelTheFirst
    @AnelTheFirst18 күн бұрын

    Do you mount the brush with or without the inner fllange?

  • @TheAzurefang
    @TheAzurefang23 күн бұрын

    Goddam move your fucking hands out the way of the camera man

  • @PeoplesGovernments
    @PeoplesGovernments25 күн бұрын

    ♻️🫧🌱

  • @cabdiraxiimcabdiqaadir1045
    @cabdiraxiimcabdiqaadir104528 күн бұрын

    Güzel fikir 😮

  • @sposobnaremont
    @sposobnaremontАй бұрын

    Witam, jak się sprawdza maszyna?

  • @mukeshjain6400
    @mukeshjain6400Ай бұрын

  • @chriswhittle3381
    @chriswhittle3381Ай бұрын

    A question I really need answering please! How do you do about angled cuts on block paving? Is it dangerous trying to hold the block at the angle required? Really wanting to buy one of these but unsure if it is suitable?

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEAАй бұрын

    Hello Chris, Thank you for your question and the interest shown in our product. This machine does not feature a tilting head allowing angled cuts and we do not recommend to hold the material angled manually. Nevertheless, we have a cutting guide available on our other machines that could fit on this CM35 and which could help to make some angled cuts. Please contact us on the following e-mail address for more information: [email protected] Joachim

  • @mukeshjain6400
    @mukeshjain6400Ай бұрын

    ❤🙏🏻

  • @mukeshjain6400
    @mukeshjain6400Ай бұрын

    Hello sir ❤🙏🏻

  • @bijuisaac3637
    @bijuisaac3637Ай бұрын

    Show the disc side please.

  • @SusanAnnePowerOfTruth
    @SusanAnnePowerOfTruthАй бұрын

    Thank you so much! I just spent 30 minutes reading through the included instructions with my brand new angle grinder, and it was so hard to make sense of the terminology. I appreciate this video!

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    Hi Susan, Glad we could help. Thanks for watching!

  • @markmall7142
    @markmall7142Ай бұрын

    Key piece of information here is you need a variable speed grinder.10 000 plus fixed rpm is going to be a disaster.

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    Exactly Mark, thanks for watching!

  • @winscometal166
    @winscometal166Ай бұрын

    Super

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    Glad you enjoyed it, thanks for watching!

  • @michaelmancini8270
    @michaelmancini8270Ай бұрын

    A question not a comment. Can you please tell me what type of gloves you are using?

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    Hi Michael, you need heat proof, abrasion proof & cut resistant gloves. You can't beat a leather type glove as this has all these properties. Hope that helps and thanks for watching!

  • @NdikaneManoko
    @NdikaneManokoАй бұрын

    What is the acceptance standard for the shape of shot

  • @Omnivorous1One
    @Omnivorous1OneАй бұрын

    So if your using a cupped disk should you flip the flange around & mount it the other way?

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    Great question. For all grinding discs you need the caselated ring inside, the same for both shaped discs. Hope that helps and thanks for watching!

  • @starybruna3162
    @starybruna3162Ай бұрын

    Vynikající video 👍👍. Děkuji za skvělý tip a přeji vám hodně štěstí 🍀🍀🍀

  • @RLLC
    @RLLCАй бұрын

    Grinding with a cutting wheel is perfectly fine just don’t be stupid and press down hard, let the wheel do the work.

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    We can't recommend doing this at all. The discs are made in a different way, for your safety and those around you, only grind with a grinding disc.

  • @levicoates5685
    @levicoates5685Ай бұрын

    Straight to the point, knowledgeable and easily explained. Thank you Uncle

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA29 күн бұрын

    Glad we could be of service!

  • @levicoates5685
    @levicoates568512 күн бұрын

    ​@@NortonAbrasivesEMEA🙏🏽🙏🏽

  • @Calito1157
    @Calito1157Ай бұрын

    Sure you can cut wood with an angle grinder but... be prepared to lose your fingers, your intestine or get a crack in your face.

  • @Dragon-Slay3r
    @Dragon-Slay3rАй бұрын

    Is this why i was surrounded by people cutting?

  • @dfpolitowski2
    @dfpolitowski2Ай бұрын

    How about simple roll of cold roll steel to dress the diamond wheel.

  • @user-yf6dc5mn6f
    @user-yf6dc5mn6fАй бұрын

    That’s terrible

  • @paulbooij7594
    @paulbooij75942 ай бұрын

    Why would you need to do cuts so close together?

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEAАй бұрын

    When removing the middle part between both cuts do you obtain a wide grove. This can be used to install cables in the floor for example. A groove can also be obtained using a single wide diamond blade, but if the floor is hard, if the cut is deep and the if blade is very wide, then could more machine power be needed.

  • @nixland
    @nixland2 ай бұрын

    I only have fixed rpm angle grinder (14,000 rpm). Is it still possible to use it to polish aluminum?

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA2 ай бұрын

    Our polishing discs require a much lower RPM to use, if you used it on your machine the fibers would simply fly off and create a snow storm! If you polish infrequently, a cheap variable speed grinder should be fine. Thanks for watching!

  • @nixland
    @nixland2 ай бұрын

    @@NortonAbrasivesEMEA Thank you for the advice

  • @presbiteroo
    @presbiteroo2 ай бұрын

    I need to bicycle U-lock made out of a combination of wood and metal then. If it is that hard to cut wood without the right disk.

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA2 ай бұрын

    🤣

  • @brandonmmmmmmmm3293
    @brandonmmmmmmmm32932 ай бұрын

    Do sparks hurt

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA2 ай бұрын

    They don't really hurt but they sure are hot! Always make sure you are wearing flame retardant overalls and gloves and ideally an apron. Always try and stand to the side so the sparks are not hitting you directly and you will be fine. Thanks for watching!

  • @nightmare7373
    @nightmare73732 ай бұрын

    Brilliant thanks

  • @freemansame8062
    @freemansame80622 ай бұрын

    Allways metal plate down with abrasive metal cutting disks and there is a logic behind it, if the disc is slipping it will not ruin your disc mount forever

  • @user-ld7pt8lh5g
    @user-ld7pt8lh5g2 ай бұрын

    How it is possible??? Because the both disc are designed for different purpose.. How can a grinding disc used as a cutting as the thickness of grinding disc can force the operator to exert the force to cutt the steel...and thete is potential risk of tool bounce back.

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA2 ай бұрын

    Thanks for the comment, We never said it was a good idea, just that it is possible ;-) The abrasive grains in the discs are the same, its just the thickness and number of reinforcement layers that are different. Thanks for watching

  • @johngaytes-ex7nt
    @johngaytes-ex7nt2 ай бұрын

    Actually you are wrong.... the metal rim sould be facing downwards!!!

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA2 ай бұрын

    Here is a bit more on an explanation - kzread.info/dash/bejne/emiew9uKgcW_gZs.htmlsi=ivkL_FnlLjhsW7Gl

  • @DarkDarkPrincess
    @DarkDarkPrincess2 ай бұрын

    OMG... THANK YOU!

  • @arthurbk3033
    @arthurbk30333 ай бұрын

    Boa noite preciso comprar uma máquina dessa cortadora de bloco

  • @jerzyn6014
    @jerzyn60143 ай бұрын

    Chłopaku , czy ja mam pól dnia myć moto czy jeździć ? Motul do mycia felg a reszta myjka i rura :)

  • @mountainbearoutdoors
    @mountainbearoutdoors3 ай бұрын

    Thankyou for the video, I just got a dewalt grinder for cutting metal and I wanted to be as safe as possible using it. I made the mistake of being lazy once cutting a bit of rebar with one without glasses on and got a hot spark in the eye, I treat grinders with great respect now.

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA3 ай бұрын

    Sorry to hear about your injury but glad you were able to learn the lesson. PPE should always be worn and hopefully, you never need it! Thanks for watching.

  • @Loverboy_Bernice1977
    @Loverboy_Bernice19773 ай бұрын

    Thanks Sir. God bless you. 😊😊😊🎉🎉🎉❤❤❤

  • @ToxicSocietyTroll
    @ToxicSocietyTroll3 ай бұрын

    You can if you understand physics and how to do it safely. Although most be are dumb and will get piece of cutting disc in the eye lid because they used cut disc to grind and only had on their squinty eye protection.

  • @EivinSukoi
    @EivinSukoi3 ай бұрын

    Try to cut a 4 feet 1/4 inch metal plate with the guards , then I will pay attention 😬

  • @dwightchavula1339
    @dwightchavula13394 ай бұрын

    ❤ Thanks again

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA4 ай бұрын

    Glad we could help. Thanks for watching!

  • @dwightchavula1339
    @dwightchavula13394 ай бұрын

    Thanks, very helpful for me a start but is it the same process when you want to cut with the cutting disk?

  • @NortonAbrasivesEMEA
    @NortonAbrasivesEMEA4 ай бұрын

    We have you covered right here - kzread.infoyo6TTAqz7Qs