This video didn't explain how to get the pin back in through the spring. Here's what I did: Put a pin in both sides to keep the parts aligned. Push one pin in as far as you can the remove the other pin. Put it in a vice and tighten slowly while attempting to guide the pin straight. It's not easy, but a vice (or maybe even a C clamp) can apply steady pressure. Good luck!
@Bergman777773 ай бұрын
i advice anyone who is trying to do this on an es2 to not bother, and just buy a new motor with a new wheel attached on it, at least if you have an older scooter like me, after days of trying, special tools bought, 50% of the screws broken and when i finally get off all the broken shit quality screws, the wheel literally is just impossible to get on, literally boiled the wheel, slapped on half a bottle of lube on that shit and it is just still impossible. idk which scooter or wheel he has but mine are 1000x more difficult, i have been defeated by this horribly made scooter and will just replace the whole motor.
@Bergman777774 ай бұрын
doesnt say what exact tool he used to open the screws, so not helpful at all as none of my tools works on them. RIP
@Nasoj0Tnek7 ай бұрын
Just did this shit. After reading the comments I thought the spring would be a horror show, nope, actually quite straight forward to get in then work the pin through. All those saying its impossible with one person are hyperbole. Just me and I did it. Need to remove the big giant pin across the middle to open up access to help you align the spring, thats the trick to get it in. Hardest part for me was putting the clamps back on the big pin, bit of a puzzle, just have to do it one side at a time, open one side put the pin, close it, open the other side put the pin, close it. It's not that bad. make sure you have a hammer, multitool, and two allen sets of keys, maybbe heat gun if you don't want to cut up the rubber foot pad. good luck.
@Gamesarecool-tb2mf10 ай бұрын
Thanks for having me cut my tire off dumb ass. Now the replacement I bought don’t fit. Ugh. I know, read the reviews fart sounds. Well maybe take the tire off right so I could have still used it instead of following dumb ass chop everything up McGee.
@OfficalJohnTutera Жыл бұрын
I can’t see what ur doing
@miroslavprochazka102 Жыл бұрын
Hey, what spanner does he use to unscrew the crews on the front wheel?
@bnaltherr2010 Жыл бұрын
good info but the music was too much
@amoledonne5265 Жыл бұрын
Mechanic not good
@riccitarpey1604 Жыл бұрын
Hi. Great channel by the way. My scooter is charging OK. But. 1) the on/off button isn't working when charging. 2) it keeps stopping in less than 5 seconds when driven. Any ideas?? Thank you.
@ninebotfix4589 Жыл бұрын
Hi. I would say, try to replace lcd first to see if any change, its easy and cheap to do. If not then main controller.
@rickbrown24 Жыл бұрын
Great video! Do you have a video for back tire as well?
@kichostone Жыл бұрын
Hi, where did you purchase the tire from? I bought a 200x50 size tire which does not fit on ES1
@kaalkass Жыл бұрын
I did use same tire btw. And i did put it on. It took much strength of 2 people. And i did allmost boil it before. Also screwdriver also helps.
@JourdanRombough2 жыл бұрын
i am still confused... going back to your first vid and watching again.... still having issues fitting in the spring and getting it to fit back together
@user-ne1rz8fy9y2 жыл бұрын
Thank you very much for this video. It works great 👍
@johnblaws81332 жыл бұрын
I would cut the your off and slid a new one on. That looks like more work than I would like
@pedroferreira98652 жыл бұрын
Does anyone know if it's possible to change the E22E tyres from the ones like the Model D? The E22E uses a 9-Inch Dual Density tyres (flat-free) and the Ninebot model D uses 10-inch air tyres with inner tube. can someone give some feedback. I'll love to change if was possible. The original tyres from e22e model it's very uncomfortable, they are only good if we have a good road without holes or if you ride on a cycle track otherwise is very bad. Thanks.
@MarstaJNZ8 ай бұрын
Did you manage to do it
@pietromoscofian55262 ай бұрын
I think you could use the solid tires of xiaomi m365 but need some modification because this is little bigger
@almo1422 жыл бұрын
Well done mate it magicked it self apart
@haydnelvis2 жыл бұрын
All i needed to know was how you removed the hub plate then at 4.09 it was done without showing!!
@kichostone2 жыл бұрын
Hi, do you know if ES2 front motor works on ES1?
@candidoalcantara67182 жыл бұрын
thanks
@czasleci372 жыл бұрын
WTF i dont unplug wires i change tire in 5 min max witch screews
@T3m0ur2 жыл бұрын
When I plug in my battery into charge (while disassembled) the internal battery light on the top of the battery just flashes red for a few seconds then turns off. Also only getting 1.7v from the battery… is the problem the battery???
@AlexMacDIY2 жыл бұрын
Lol can’t hear an F*ing word. But thanks for the video
@aguspriyatno3912 жыл бұрын
Om cara bedain es 1, 2, 3 dan 4 di mana nya om? Saya lagi nyari yg baterai awet dan speed nya kenceng, rencananya buat ngojol Grab ambil orderan food
@verticallyii19242 жыл бұрын
since i broke my wires on the inside of the tire and dont want to mess with it, could i please have a link for original ninebot es4 front wheel motor?
@verticallyii19242 жыл бұрын
i broke wires inside the wheel
@ninebotfix45892 жыл бұрын
Get a new motor. Not too expensive. I prefer to change motor rather than play with wires. Good luck!
@verticallyii19242 жыл бұрын
can i have a link? it happened cause the tire was too small, i need a link of original ninebot es4 motor, thank you👊👍
@heber9032 жыл бұрын
Bro why is it impossible to find front tire replacements Also, can you use the real wheel for the front?
@ninebotfix45892 жыл бұрын
What do you mean ypu cannot find front tyre replacements? I think this video is about tyre replacement :)
@Vdtvsfhgdy2 жыл бұрын
Salve Buonasera Ci illumino Patini bloccata la programmata un telefono prima funziona e dopo bloccata
@thacrypt2232 жыл бұрын
The music ruined the whole experience.
@ninebotfix45892 жыл бұрын
Next time i will sing))
@danihani25262 жыл бұрын
Hey man you are the best , do you know how to fix error code 48 on es4
@ImportedFromSerbia2 жыл бұрын
did you hit a pothole or some kind of step? try to disconnect cable for source of power, wait for few minutes, then plug it back and see if code error is gone. good luck.
@Orholam52 жыл бұрын
The part I got has extra metal where the pin goes in. Is that the issue you had as well?
@ninebotfix45892 жыл бұрын
Yes
@Orholam52 жыл бұрын
@@ninebotfix4589 where did you find the correct part?
@user-un6io7id3o2 жыл бұрын
На гайки фиксатор синий надо мазать
@user-hw5dk3tg2d2 жыл бұрын
А русская версия канала есть????
@MahiEurope3 жыл бұрын
How many cells here??
@noelperezrodrigues80223 жыл бұрын
Tengo una mano. Me está asiendo un ruido al frente que puede ser ai mismo en la goma de al frente
@bobstodomingo3 жыл бұрын
You are great bro, I learned from you, I have my ES2 also, sooner will change my tire too, subscribed already, thank you 😊👌
@DeivEnzo3 жыл бұрын
mine is goo but when i drive it shakes nd makes sounds
@chaihu69593 жыл бұрын
Hey you need 2 people for this job. One to push the spring back in with a big flat head screwdriver to adjust your finger just ain’t strong enough. other person tap in the pin with a hammer once you aligned wit the flat head. There’s no way you can do this wit one person unless you have proper tool to hold the spring in place.
@tornikekandelaki72433 жыл бұрын
Подскажите название трека, пожалуйста 🙏🙏🙏
@denisfelic18873 жыл бұрын
You did give us nothing fucking idiot
@djcuriosity66703 жыл бұрын
The rear fender is made of plastic and will not last 3months before having replace again and again. Upgrade to metal...
@nelsonmartinez11423 жыл бұрын
That pin gave me such a hard time!
@user-rs7yb9lq4f3 жыл бұрын
요게 훨씬 쉬워보이네요.감사합니다!
@kurtfenstermacher81573 жыл бұрын
Thank you for posting. This was super easy thanks to your video.
@@ninebotfix4589 у меня scooter KUGOO 2 KIRIN . Подойдёт ? 50/75-6.1 (81/2x2)
@nothkoreanrocket96723 жыл бұрын
maaan :D i have seen people dropping the tire into hot water for a short time but hitting up the microwave is on another lever! great video mate, keep'em coming
@johnblaws81332 жыл бұрын
That's what I would of done. He's doing got the hard way for sure.
@rinatus0073 жыл бұрын
Я думал Пугачева ?
@huaweihonor77143 жыл бұрын
Hello do you know how to fix Error 45 for a Segway ES2 ?(it shots down and you should connect the charger in order to turn on again)
Пікірлер
Es3?????????
This video didn't explain how to get the pin back in through the spring. Here's what I did: Put a pin in both sides to keep the parts aligned. Push one pin in as far as you can the remove the other pin. Put it in a vice and tighten slowly while attempting to guide the pin straight. It's not easy, but a vice (or maybe even a C clamp) can apply steady pressure. Good luck!
i advice anyone who is trying to do this on an es2 to not bother, and just buy a new motor with a new wheel attached on it, at least if you have an older scooter like me, after days of trying, special tools bought, 50% of the screws broken and when i finally get off all the broken shit quality screws, the wheel literally is just impossible to get on, literally boiled the wheel, slapped on half a bottle of lube on that shit and it is just still impossible. idk which scooter or wheel he has but mine are 1000x more difficult, i have been defeated by this horribly made scooter and will just replace the whole motor.
doesnt say what exact tool he used to open the screws, so not helpful at all as none of my tools works on them. RIP
Just did this shit. After reading the comments I thought the spring would be a horror show, nope, actually quite straight forward to get in then work the pin through. All those saying its impossible with one person are hyperbole. Just me and I did it. Need to remove the big giant pin across the middle to open up access to help you align the spring, thats the trick to get it in. Hardest part for me was putting the clamps back on the big pin, bit of a puzzle, just have to do it one side at a time, open one side put the pin, close it, open the other side put the pin, close it. It's not that bad. make sure you have a hammer, multitool, and two allen sets of keys, maybbe heat gun if you don't want to cut up the rubber foot pad. good luck.
Thanks for having me cut my tire off dumb ass. Now the replacement I bought don’t fit. Ugh. I know, read the reviews fart sounds. Well maybe take the tire off right so I could have still used it instead of following dumb ass chop everything up McGee.
I can’t see what ur doing
Hey, what spanner does he use to unscrew the crews on the front wheel?
good info but the music was too much
Mechanic not good
Hi. Great channel by the way. My scooter is charging OK. But. 1) the on/off button isn't working when charging. 2) it keeps stopping in less than 5 seconds when driven. Any ideas?? Thank you.
Hi. I would say, try to replace lcd first to see if any change, its easy and cheap to do. If not then main controller.
Great video! Do you have a video for back tire as well?
Hi, where did you purchase the tire from? I bought a 200x50 size tire which does not fit on ES1
I did use same tire btw. And i did put it on. It took much strength of 2 people. And i did allmost boil it before. Also screwdriver also helps.
i am still confused... going back to your first vid and watching again.... still having issues fitting in the spring and getting it to fit back together
Thank you very much for this video. It works great 👍
I would cut the your off and slid a new one on. That looks like more work than I would like
Does anyone know if it's possible to change the E22E tyres from the ones like the Model D? The E22E uses a 9-Inch Dual Density tyres (flat-free) and the Ninebot model D uses 10-inch air tyres with inner tube. can someone give some feedback. I'll love to change if was possible. The original tyres from e22e model it's very uncomfortable, they are only good if we have a good road without holes or if you ride on a cycle track otherwise is very bad. Thanks.
Did you manage to do it
I think you could use the solid tires of xiaomi m365 but need some modification because this is little bigger
Well done mate it magicked it self apart
All i needed to know was how you removed the hub plate then at 4.09 it was done without showing!!
Hi, do you know if ES2 front motor works on ES1?
thanks
WTF i dont unplug wires i change tire in 5 min max witch screews
When I plug in my battery into charge (while disassembled) the internal battery light on the top of the battery just flashes red for a few seconds then turns off. Also only getting 1.7v from the battery… is the problem the battery???
Lol can’t hear an F*ing word. But thanks for the video
Om cara bedain es 1, 2, 3 dan 4 di mana nya om? Saya lagi nyari yg baterai awet dan speed nya kenceng, rencananya buat ngojol Grab ambil orderan food
since i broke my wires on the inside of the tire and dont want to mess with it, could i please have a link for original ninebot es4 front wheel motor?
i broke wires inside the wheel
Get a new motor. Not too expensive. I prefer to change motor rather than play with wires. Good luck!
can i have a link? it happened cause the tire was too small, i need a link of original ninebot es4 motor, thank you👊👍
Bro why is it impossible to find front tire replacements Also, can you use the real wheel for the front?
What do you mean ypu cannot find front tyre replacements? I think this video is about tyre replacement :)
Salve Buonasera Ci illumino Patini bloccata la programmata un telefono prima funziona e dopo bloccata
The music ruined the whole experience.
Next time i will sing))
Hey man you are the best , do you know how to fix error code 48 on es4
did you hit a pothole or some kind of step? try to disconnect cable for source of power, wait for few minutes, then plug it back and see if code error is gone. good luck.
The part I got has extra metal where the pin goes in. Is that the issue you had as well?
Yes
@@ninebotfix4589 where did you find the correct part?
На гайки фиксатор синий надо мазать
А русская версия канала есть????
How many cells here??
Tengo una mano. Me está asiendo un ruido al frente que puede ser ai mismo en la goma de al frente
You are great bro, I learned from you, I have my ES2 also, sooner will change my tire too, subscribed already, thank you 😊👌
mine is goo but when i drive it shakes nd makes sounds
Hey you need 2 people for this job. One to push the spring back in with a big flat head screwdriver to adjust your finger just ain’t strong enough. other person tap in the pin with a hammer once you aligned wit the flat head. There’s no way you can do this wit one person unless you have proper tool to hold the spring in place.
Подскажите название трека, пожалуйста 🙏🙏🙏
You did give us nothing fucking idiot
The rear fender is made of plastic and will not last 3months before having replace again and again. Upgrade to metal...
That pin gave me such a hard time!
요게 훨씬 쉬워보이네요.감사합니다!
Thank you for posting. This was super easy thanks to your video.
Какой размер резины покупал? Inch 8.5 Подходит?
8.5 no specialnaja dlia segway es modeli
@@ninebotfix4589 Напиши какой подходит размер
www.ebay.co.uk/itm/ES1-ES2-ES3-ES4-Electric-Scooter-Tires-for-Ninebot-Non-pneumatic-Wheel-Tyre-w-/124366536348?_trksid=p2349624.m46890.l49286
@@ninebotfix4589 ok thank you 😀👍
@@ninebotfix4589 у меня scooter KUGOO 2 KIRIN . Подойдёт ? 50/75-6.1 (81/2x2)
maaan :D i have seen people dropping the tire into hot water for a short time but hitting up the microwave is on another lever! great video mate, keep'em coming
That's what I would of done. He's doing got the hard way for sure.
Я думал Пугачева ?
Hello do you know how to fix Error 45 for a Segway ES2 ?(it shots down and you should connect the charger in order to turn on again)
What is the number for the torx key?
T25 for the tire