Пікірлер

• 
  @Martin-lo6ln2 ай бұрын

  Whats the delphi code ?

• 
  @NortelGeek2 ай бұрын

  They're not protesting the 😷 or the 💉, they're protesting the hypocritical politician that tells them that they must do either, or lose the ability to enjoy Constitutionally-protected activities. Yes, it's noisy -- that's the sound of pissed-off Americans. I wonder what the sound was like at the Boston harbor when it was turned into a big old cup of tea. 🇺🇲

• 
  @matthiasalbers25622 ай бұрын

  Ha ha ha

• 
  @pastormix72 ай бұрын

  Can you project anything?

• 
  @BiffMartin2 ай бұрын

  No Sir. In fact, I may have fragged the onboard flash memory by attempting buffer overflow hacks on the web interface. The telnet interface still works, though.

• 
  @EngineersWorkshop2 ай бұрын

  I'm partway through this (firmware installed) now trying to get the SEP <macaddress>cnf.xml files to load without success. The phone would only recognize the TFTP server through IPv6, but once I solved that still gives errors "TFTP Error : ram/SEP..". and "TFTP Error : SEP..." Could you post a source for a correctly coded cnf.xml file for this phone? Running Asterisk on FreePBX.

• 
  @BiffMartin2 ай бұрын

  I will look around in my collection. I have long ago given up on using Cisco phones for Asterisk. PolyCom and YeahLink are much easier to configure.

• 
  @jackbandy64043 ай бұрын

  I'll pay you to fix my smart sans unit

• 
  @alperarslantas57715 ай бұрын

  part2

• 
  @cjc11037 ай бұрын

  This will accomplish nothing useful. You need a pressure washer. I saw another video of a guy who cut the DPF open, cleaned it, then rewelded it back together. YMMV

• 
  @jimmysam31068 ай бұрын

  You didn't show us the first step man

• 
  @OnwardUpward-kq4bk8 ай бұрын

  For others... This project will need the help of a logic analyzer (i.e. a BusPirate, or RPi repurposeed as a logic analyzer) in order to identify the communication protocols and pinouts..

• 
  @marcuscarr1239 ай бұрын

  this place has a great band and great artist. So many rich cougars so be careful.

• 
  @ricardobino741010 ай бұрын

  If you are not going to continue with part 2 then take down this video. It gives a false result and wastes 6 minutes of our time for nothing.

• 
  @Peter_A146610 ай бұрын

  Any chance for part 2?

• 
  @SintherX11 ай бұрын

  Hi Mike, curious about part 2. Any progress so far?

• 
  @steveDENENBERG Жыл бұрын

  I have to replace th rear Sam as no signal from it I have the same part number as you where did you get it I am having a hard time finding the one I need please help it was water damaged. Thank you

• 
  @rallyauto34 Жыл бұрын

  add muriatic acid as well but do not over do it

• 
  @kdao1007 Жыл бұрын

  You should let folks send you their unit and you can charge to repair it LOL

• 
  @ToTheTower Жыл бұрын

  Great videao. With the rear SAM out of action I can't move the passenger seat forwards - any tips on how to achieve this?

• 
  @brookeberesford Жыл бұрын

  never going to get my 6 minutes back am I

• 
  @Mr.Tim.s_Tutoring7 ай бұрын

  somebody else might see this and find a solution

• 
  @astro40000 Жыл бұрын

  I am currently using Grandstream HT802 for 2 SIP (3rd party) phones. Will the account info that I currently use work with this firmware for the 7965g? I do not want to use asterisk if possible also. Also not sure what to do with pumpkin... no info what to do, I have loaded it but...?

• 
  @nexarian2523 Жыл бұрын

  If nothing else I'd like to find a way to use the little LCD displays out of these printers. I've got four or five in a box from printers I've scrapped & have always wanted to build them into something.

• 
  @martywolf1819 Жыл бұрын

  I got a turbo from a thunderbird you walked passed

• 
  @aarohaan Жыл бұрын

  Forget the Dpf. Sort your throat out first.

• 
  @TFitzner1 Жыл бұрын

  So eine Riesen Umweltsauerrei-meine Güte-keine Ahnung von nix der Type.

• 
  @adrielburned6924 Жыл бұрын

  Great video. I love kayaking and old mines. I live west of Port Angeles, WA. Lots of old manganese mines I've explored and scuba lake crescent. You would love that lake!

• 
  @mcplutt Жыл бұрын

  Not good enough.

• 
  @BiffMartin Жыл бұрын

  It is good enough. 2 years later, this DPF is still clean!

• 
  @rossiwilson9053 Жыл бұрын

  Lol

• 
  @GeoEray22 Жыл бұрын

  Do you have any interest in one that I replaced? Moisture got it.

• 
  @BiffMartin Жыл бұрын

  It would be useful for a tear down video. I have always wanted to find out what kind of components are on this that can cause the rear lights to fail.

• 
  @GeoEray22 Жыл бұрын

  @@BiffMartin if you pay postage I'll send it to you.

• 
  @leadboots72 Жыл бұрын

  No way this guy is serious.

• 
  @christianrazvan Жыл бұрын

  Don't tappet it:)) The purpose for cleaning outside of the car is to clean the ash which it never gets burned. The soot will burn when the car make the regen but the ash only disolves in water and HCl and caustic soda

• 
  @bryanphelps73712 жыл бұрын

  trying to update 10 ebay phones I just got. And I love using Pun kin. But I have not been successful. Can you help me?

• 
  @angrycatowner2 жыл бұрын

  Where does it fail? Can you explain?

• 
  @columbo_3582 жыл бұрын

  Hi Mike, still working on part 2 or did you give up? I would be very interested in things you found out 👍

• 
  @acapest Жыл бұрын

  Me too! Looking forward to part 2 :D

• 
  @BiffMartin Жыл бұрын

  I need to jump back into this subject. Just need to purchase a better oscilloscope or maybe a logic analyzer.

• 
  @johnnapoleao3652 жыл бұрын

  Hello, Very good explanation, thank you. I've (9 units) 7965G CISCO phones and (1unit) 7937G Cisco conference phone. I've configured them in Cisco 2811 Router. I'm using a 24 ports POE switch. The phones has Registered and got IP addresses from DHCP. Telephonie is setup but there's no DIAL TONE not even extension numbers. Please can you help

• 
  @angrycatowner2 жыл бұрын

  SIP phones usually don't get a dial tone. You just enter the digits and hit the dial button.

• 
  @nometalgearr2 жыл бұрын

  You already got the dpf out. You should have done a better job. Instead of hitting etc. Just use a drain acid (50/50 with water) for a first flush and 2nd flush to get the soot out and then use brick acid hcl (25/75 with water) for a 3rd and 4th flush to get the dust accumulation out. This is a pretty expensive piece you don't want to ruin it with foam and or hitting it a bunch of times. It's not gonna last long.

• 
  @ricardobarbosa2782 жыл бұрын

  I'm using tftp on Linux when the phone goes up and finds the term65.default file and then it restarts. Could it be the bad ip phone?

• 
  @angrycatowner2 жыл бұрын

  Could be the term65 file is faulty. check the contents of it.

• 
  @ricardobarbosa2782 жыл бұрын

  ​@@angrycatowner I download other file it's happen and same thing

• 
  @milimomaambo65262 жыл бұрын

  Thanks for the video. How do I make the config and dial plan files? Am trying to configure the CP7945G on a grandstream UCM6304 IPBX

• 
  @V.Becerra2 жыл бұрын

  im trying to do it using CP-7962G Cisco Phione on a Grandstream UCM6202 IP PBX

• 
  @milimomaambo65262 жыл бұрын

  @@V.Becerra please let me know when you manage

• 
  @joshyoung14402 жыл бұрын

  After so much time with a disassembled printer taking up space in my room, and so much time searching for help, I finally saw your thumbnail with some parts that look exactly like the ones I've got. *rubs hands together* time to get down to business

• 
  @bracko90812 жыл бұрын

  Thanks for the thorough instruction! Great Video...going to see if I can fix my rear sam... ML350

• 
  @buffernews3842 жыл бұрын

  A fool

• 
  @a.b.50142 жыл бұрын

  again!!! "If I swap one does it have to be re-programmed or can I just start it up and go?" Thanks!

• 
  @evelynmahoney35692 жыл бұрын

  I like your video very much. You're a good teacher. Growing up, my dad fixed everything from the clothes dryer to flat tires. I try to do the same and i continue to learn so much! That's despite well meaning friends saying. 'Why don't you get a new one / take it to the shop / call a repairman?" That's the last resort. The first being, 'Let me take a look. Maybe it's something I can fix."

• 
  @earthlingmoe3742 жыл бұрын

  I have a question. Sorry if it sounds dumb but........is that how you do it!!?

• 
  @BiffMartin2 жыл бұрын

  Yes, it is a dumb question. Why would you ask? If somebody posts a DIY how to video about how to do something, then why would you ask "is this how you do it?" Just use the meat between your ears to think about it for a minute.

• 
  @brettdeamyand76852 жыл бұрын

  Yep "that's how you do it" 🤣🤣🤣🤣🤣

• 
  @louisgarez85202 жыл бұрын

  where is part2 ? would love to see that one and do the same on my printer !

• 
  @rbrood2672 жыл бұрын

  Did it work ?

• 
  @BiffMartin2 жыл бұрын

  Yes sir!

• 
  @tomb3752 жыл бұрын

  Now my Speedometer is not working properly. It's into the Clock way below Zero when I restart the car. Any Ideas how to reset?

• 
  @EpicCowlick3 жыл бұрын

  Everyone relax. It's a master class in dead-pan humor. That's how you do it!

• 
  @bjarnieinarsson34723 жыл бұрын

  Is this a joke?

• 
  @BiffMartin3 жыл бұрын

  No, this is for real. It really does remove the soot.

• 
  @ismaelcely38823 жыл бұрын

  como se hace con call manager ,ya no esta el software disponible para descarga

• 
  @javierchacon91553 жыл бұрын

  El dueño de este canal es de habla inglés debes preguntar en el idioma adecuado. Y para responder a su inquietud, es posible conseguir los Firmware en diferentes foros de internet, pero para ir a lo seguro, busca a algún Partner de Cisco y pregúntale si te puede regalar una copia.

• 
  @thebrodnaxs83043 жыл бұрын

  Dont forget the clip in the middle at the top that also holds on to the cluster.

• 
  @jaguar70513 жыл бұрын

  Joe are you Comedian? Ask your wife for advice Ha Ha Ha