Пікірлер

• 
  @llilloka23Күн бұрын

  Awesome go with glossy black

• 
  @durgarammaharjan45603 күн бұрын

  what about cooling and heating on driver side and passenger side. mine is driver side not blowing cold even it is set lo temperature. passenger side working fine.

• 
  @bodymartovski81214 күн бұрын

  Try raceroom, thank me later

• 
  @ginacampbell49908 күн бұрын

  Harbor freight to the rescue

• 
  @satoshiserena484310 күн бұрын

  I think the real problem is the rear diffuser. It create so much dirty air because the cars aren’t going fast enough for it to work like it’s supposed to. Also the past 2 years it seems the design of the Camaros are superior on short tracks & road courses than the Mustang and Camry.

• 
  @saleemkader212613 күн бұрын

  Thankyou for sharing your video. I have a few dents to remove, God bless you.

• 
  @tkpersonaltraining662414 күн бұрын

  I don't think I've seen one of these without a dent in that exact spot...

• 
  @GodelEscherBachus14 күн бұрын

  I am not that knowledgeable on the physics of racing but i have a comment ill throw out there for anyone else to correct me on. I feel like the next gen car was an attempt to make dirty air less of an issue on bigger tracks by making mechanical grip easier to produce (wider tires, larger tires, maybe other things im not aware) and they also tried to reduce the amount of dirty air that the leading car produces (stepped splitter, rear diffuser, smooth underbody). And so the car's design was a massive attempt to solve the dirty air problem and give the trailing faster car the ability to get right up on a leading car without having dirty air stall them out and then allow them to have enough mechanical grip to get around them. But it just didn't work and the cars still stall out when when they are behind a leading car (and blocking has just become so easy to do for the lead car) and the dirty air still robs them of the downforce they need to overtake the leading car. And all the changes i listed above (as well as better brakes, IRS and the sequential shifter) have just ruined short track racing with no real way to fix that

• 
  @debl135918 күн бұрын

  You commented you keep getting hit in that tan car! I once read statistically tan and silver cars get hit the most and are involved in the most car accidents, because they mix in too much. You can’t see them as well when you’re making that last minute glance before proceeding. For that reason I’d never buy a tan or silver car!

• 
  @scottcrisp247619 күн бұрын

  This video is a joke. 2021 4 Runner with a 15 1/2 steering wheel. This thing ain't even close to fitting. Horrible product.

• 
  @juskillz522924 күн бұрын

  I chucked mine in the bin because i thought it was to small 😂😂 grabbed straight back out when i see this vid duhhhhh

• 
  @johnwayne140924 күн бұрын

  I think macco uses the foot technique also.

• 
  @christin109525 күн бұрын

  Nice try but I just fixed a dent way bigger than that for $14

• 
  @Tsukuyomi826 күн бұрын

  Hi I am 1,86cm and 98 kg would I be able to fit and drive comfortably ??? Thanks in advance and enjoy your car❤

• 
  @BoziTatarevic125 күн бұрын

  I am 188cm and 100kg to give you a reference on how tight it might be for you.

• 
  @Tsukuyomi825 күн бұрын

  Ok I appreciate your answer!

• 
  @dsfgdsg23326 күн бұрын

  thank you bozi

• 
  @jawad5tvАй бұрын

  Hello sir how are you

• 
  @gomcseАй бұрын

  Extremely helpful. Thank you.

• 
  @vaelo_elricАй бұрын

  that's the WORST system ever. Since I discovered it last week when my wife microcrash and pop up hood failure massage appeared in the warning screen. Don't know is your country. In mine, in Lexus Official this cost 5000€. There is some pop up hood cancellers you can buy. I'm trying to figure out how to install them properly.

• 
  @WatchDaddyURepairАй бұрын

  New subscribe

• 
  @billietreece2781Ай бұрын

  This is great but I would've loved to see how you removed whatever was in the trunk to get to the wall of the dent.

• 
  @StormmaniacАй бұрын

  I have seen a few videos on these and from what i seen it best to keep your money even with the glue dent pullers..

• 
  @GSPDUKEАй бұрын

  Thanks for the great tips and evaluation of products. I have an easy bump compared to yours. I am leaning towards Harbor Freight and getting the needed arsenal. If none of it works, then it stays where it is.

• 
  @mikeslechta6607Ай бұрын

  What a job. You’re lucky

• 
  @shotbyinspektr7368Ай бұрын

  Nice

• 
  @charles-fq2dwАй бұрын

  very quick upshifts but slow downshifts compared to a dct

• 
  @electedelite2210Ай бұрын

  Yeah, foot did like 99 percent of the work.

• 
  @MrPunch09Ай бұрын

  Took me about 3hrs with the wheel attached, a couple of places were difficult to see the back side and I was too stubborn to turn the car on and simply turn the wheel as needed. However if you are thinking about doing this I do recommend it, but also don't be stubborn turn the car on and turn the wheel as needed.

• 
  @stephanyburgess633Ай бұрын

  Just use boiling hot water then suction it you could even use a toilet plunger if you have to

• 
  @briangray76142 ай бұрын

  Nice tutorial.

• 
  @garrettluluquisin56662 ай бұрын

  Softer bars in the front/stiffer bars in the front are always the ideal setup in FWD or more specifically transversely-mounted front-engine cars. Since the engine is mounted much more ahead of the front axle compared to a mid-engined car it’ll need more coersion to rotate the rear.

• 
  @doncorleon92 ай бұрын

  Whiplash!

• 
  @Simple5.02 ай бұрын

  My wheels are so friggin heavy.

• 
  @patrickbrady5192 ай бұрын

  That's the PITS

• 
  @c.d.89752 ай бұрын

  Ryan preece sucks 👌

• 
  @anecd0talgamer9902 ай бұрын

  GEt cho ass out that trunk 😭

• 
  @jacksampson77112 ай бұрын

  These covers are hit or miss. I installed 2 on an BMW 435i that came out pretty well. Ordered 1 for my BMW M340i and it did not fit at all. Contacted the vendor and they were no help. Beware.

• 
  @lilblackfish20092 ай бұрын

  thx iam 6'2 as well and this is one big reason why i want a prius cuz i want to camp in it and not spend on hotels when iam traveling i like it , i was worried as a big guy

• 
  @said99702 ай бұрын

  good job, what is the name of that puller tool and from where can i buy it? ty

• 
  @dickraw74422 ай бұрын

  If you've never heard one of these in person, you must try it once ! The Earth vibrates ❤❤the grand stands shake. Your eyes will burn like they've never burned before.

• 
  @GEN-X-2 ай бұрын

  Toyota drag cars should have to use a Toyota engine.

• 
  @zackpagan5902 ай бұрын

  Does it affect the fueling?

• 
  @Iqtidar2 ай бұрын

  You can buy the Microswitch harness and the Stainless Steel Paddle Gear kit from EVANNEX in the US for just $20 - $106.

• 
  @hypershrimp_2 ай бұрын

  How is this channel so underrated???

• 
  @SymRuX3 ай бұрын

  How tall are you, Bozi?

• 
  @BoziTatarevic13 ай бұрын

  6’2”.

• 
  @SymRuX2 ай бұрын

  @@BoziTatarevic1 thanks! Would a 6-4 guy be able to drive the Prius comfortably?

• 
  @ChiefJoey59713 ай бұрын

  It's always fun

• 
  @Sharow983 ай бұрын

  You helped immensely!! 🙏

• 
  @dar322sk3 ай бұрын

  very informative. Thank You!

• 
  @Freddy_Confetti3 ай бұрын

  Looks like a Porsche but better

• 
  @ornatehammer6613 ай бұрын

  Does it have headroom while driving for a 6'5" person?

• 
  @BoziTatarevic13 ай бұрын

  I would say that 6’4” is probably the limit.

• 
  @ornatehammer6613 ай бұрын

  @@BoziTatarevic1 thanks!

• 
  @ZeeButsog3 ай бұрын

  Just push it out from the inside 😜