Пікірлер

• 
  @DaleREVOprendelaGTA14 сағат бұрын

  Hi! So for some reason after I did this swap out for my LEDs, they wouldn’t last more then 10 minutes on with a 10a fuse. I had to upgrade to a 20a fuse because it would not last with a 15a fuse either but now the driver side visor light won’t turn off. It was working fine at first but then this morning, the light would not turn off and the visor is all the way shut. What do you think might be causing the issue?

• 
  @motwguy21 сағат бұрын

  This is FANTASTIC, thank you sir!!

• 
  @billyheddle85522 күн бұрын

  Just says sorry i don't know about that

• 
  @rafars22465 күн бұрын

  That's why I buy soundbars, don't have to deal with any gain bullshit lol

• 
  @Chris26ga5 күн бұрын

  Hi! I have the 2025 e-power. Does this led bulb works the same for this vehicle? Thanks!!

• 
  @stevee44446 күн бұрын

  why are you calling the battery cell a capacitor???

• 
  @apj57636 күн бұрын

  Have you compared your real world accuracy with the timegrapher data? I’d be curious how much variance there is between the two

• 
  @naryah227 күн бұрын

  How about the light in the center storage between both front seats?

• 
  @pablolubbert973910 күн бұрын

  Hello, thanks for this video; when you start the process with left speaker against the wall, is the right speaker turned on also?

• 
  @COGuyStuff9 күн бұрын

  Yes, it is

• 
  @antiWhiteism77710 күн бұрын

  ​@COGuyStuff --- Do a review of the Gamepod 1.5 and Interactor Cushion!

• 
  @thanynong392311 күн бұрын

  Thanks buddy. Just used your link to order mine.

• 
  @bayapaya89212 күн бұрын

  Full size buttkickers ! Yes yes yes 😅 not overkill.

• 
  @mayowaade285613 күн бұрын

  I have this same I want to upgrade 4gb soldered slot + 8 GB replaceable. Am I to simply replace the 8 GB with 16gb or solder the 16gb to the Soldered slot

• 
  @tedmanasa90714 күн бұрын

  Thanks for the videos. Word of caution: Dirac’s resultant curve is a loose prediction based on what it “knows” about your room-which isn’t a lot. Measuring actual room response post calibration with REW often differs quite a lot from what Dirac predicts. Unfortunately, Dirac’s resultant curve isn’t a reliable guide for what your crossover changes are doing to your room response. The best thing I have found to do is trial/error the crossover in Dirac then measure with REW. I get much deeper, much more even bass doing that than following Dirac’s prediction.

• 
  @COGuyStuff14 күн бұрын

  While somewhat true, it is FAR more accurate in some versions vs others. I use 3.4.4 and it's spot on comparing results in REW to a single measurement point.

• 
  @tigerbalm66615 күн бұрын

  Tip: Cut the braided sleeve at an ANGLE!

• 
  @dlorde15 күн бұрын

  Wow, that is excellent! - I'd struggled to get SmartThings to relink with Harmony until I found this - now it works like a dream, and so fast! Many thanks for making all so simple to follow 👏

• 
  @COGuyStuff14 күн бұрын

  You're welcome!

• 
  @larryhazelwood549116 күн бұрын

  With a power conditioner it is not just about sound.I have a Panamax 5400 PM and when power is connected or there is an outage the outlets engage one at a time instead of all power on with a power strip.

• 
  @stevecliment826716 күн бұрын

  I made it after 90 minutes struguling 😅 they worked after putting the led to all and test each one. but all of a sudden all of them stop working 🥲 any recommendation?

• 
  @COGuyStuff16 күн бұрын

  Check the fuses

• 
  @wolfen23118 күн бұрын

  Ahh thanks for this. Don’t know if this one I got from China will make a diff on the battery change but the guide to swap was helpful. Thanks!

• 
  @COGuyStuff17 күн бұрын

  They are all the same

• 
  @wolfen23117 күн бұрын

  @@COGuyStuff I figured as much. I am in Malaysia so ordering from Aliexpress is easier haha.

• 
  @Squimbelina18 күн бұрын

  Didn’t help me at all, sadly. I can stand a foot away from the one I want to respond and the one that answers is literally the furthest away

• 
  @Rayman-expertsoundpro19 күн бұрын

  How did you time align the Crowsons with your other speakers and subs?

• 
  @COGuyStuff19 күн бұрын

  Here’s everything you need to know. This guy has been putting all our info in one guide for years docs.google.com/document/d/1_WP-oGOIl6YvtnofxO3Z00BgGdELiM2y/edit?usp=sharing&ouid=113645576429475849506&rtpof=true&sd=true

• 
  @Rayman-expertsoundpro19 күн бұрын

  @@COGuyStuff Thanks. I have that on hand but it does not really explain how to go about time aligning them as a process i.e. does one turn off audy and then use the farthest sub with no delays to align to crowsons and then use that delay to adjust all other subs and speakers? etc

• 
  @ellestar230624 күн бұрын

  Is updating the firmware in the c2 a must? Mines out of the box too

• 
  @COGuyStuff24 күн бұрын

  It depends on what version you are on, and if the newer features/changes matter to you.

• 
  @DanieleMunicchi24 күн бұрын

  Thanks a lot for your video. Before purchasing the RAM I verified that the original module is @1866Mhz (PC3-14900), while the one you choose is @1600Mhz (PC3-12800).Can you confirm that this does not affect the performance/compatibility? I found another kit @1866, still from crucial: CT2K8G3S186DM, it says Mac compatible, but the timing, speed and type are the same except for the speed. What do you think about.

• 
  @COGuyStuff24 күн бұрын

  I can only confirm what I used works perfectly

• 
  @DanieleMunicchi24 күн бұрын

  Got It. I Just purchased the one you tried. Thanks again. 👍🏼

• 
  @vinnyvanca174827 күн бұрын

  Thank youu!!

• 
  @COGuyStuff26 күн бұрын

  Welcome!!

• 
  @onyachamp27 күн бұрын

  Thanks mate, used this method to do cables for my 5.1 theatre setup. Pretty much same gauge amazon cable, same sheath/loom, plugs and shrink tube. The only different thing I did was to use a small amount of clear sticky tape wound around the sheath and cable to stop the ends from fraying as I slid the Y pants on. Was having a bugger of a time before that.

• 
  @Goryglory020927 күн бұрын

  thanks Chief

• 
  @COGuyStuff27 күн бұрын

  You bet

• 
  @LLL-us9lw27 күн бұрын

  I also gave this a try yesterday and i can hear a clear difference but cant say i like it better. I watched Edge of Tomorrow with it today and it sounds just like i’m cupping my ears. Its a very similar effect. I can make the effect go in and out by rocking forward 10-12 inches. It’s pretty wild. Im going to run it again but be 2-3” back. So more of a 5” from headrest then apply the 8” rule. But yeah its very similar to cupping my ears as if you do when youre trying to better hear whats in front of you. Thats the best way i can explain it. Thanks for the inspiration to try new ways to calibrate

• 
  @johnmiller477328 күн бұрын

  Curious as to why you didn't mount the new horns where the old one was. Great video though! Thanks!

• 
  @COGuyStuff28 күн бұрын

  They wouldn’t fit where the stock was.

• 
  @colourbasscolourbassweapon213529 күн бұрын

  man i need a amp for my dual pa 18 inch subwoofer no cap

• 
  @robosledger515829 күн бұрын

  I can’t thank you enough! I have two five gallon containers that I fight with. I can’t wait to swap the spouts out.

• 
  @COGuyStuff29 күн бұрын

  Glad I could help!

• 
  @redscorpion9325Ай бұрын

  Is it real leather?

• 
  @COGuyStuffАй бұрын

  Yes

• 
  @DrOcKa20Ай бұрын

  Bought the same ones on Amazon a few weeks ago. So much better than the crap that it comes with.

• 
  @wrbegleyАй бұрын

  Actually that is what the world used for decades before the spout we grew up with. They actually work quite well but are a different operation.

• 
  @COGuyStuffАй бұрын

  This is, what I grew up with. My dad had a metal round super can, I had this for mowing lawns d3au0sjxgpdyfv.cloudfront.net/a-42933405-zm6sedpkk3fz7kp2.jpeg

• 
  @elithegreat6463Ай бұрын

  Good Stuff, just no "toasting" Sticks when working around Gas Fumes....

• 
  @COGuyStuffАй бұрын

  Tonight we’re smoking the el boomba!

• 
  @trytofollowАй бұрын

  Most useful vid yet.

• 
  @lordgarth1Ай бұрын

  Thanks for the vid. I’ve just been living with this crap.

• 
  @thestig007Ай бұрын

  Yep. Did the same to my cans. Those dang "safety" spouts are impossible to use and actually end up wasting fuel and make a mess if you're fiddling around trying to get it to pour. It's much simpler to literally just pour gasoline into your machine or car with a normal spout.

• 
  @pedrofernandez8729Ай бұрын

  Those reviewers trying to get us regular listeners w/o thousands of dollars spent on HI FI gear to buy an outside DAC are not being honest, I got one to bypass my PC's gaming motherboard's built in DAC and honestly i could not tell the diff. I feel I wasted $150.

• 
  @Konducta4LFEАй бұрын

  Thank you so much

• 
  @brnmaullАй бұрын

  Perfect timing 4 video! I was just trying to figure out y smartthings wasnt working and i go on youtube and u just posted this video. Thank you i was going nuts. Hopefully they get this problem figured out.

• 
  @COGuyStuffАй бұрын

  Glad I could help!

• 
  @user-hn3ic3vz4pАй бұрын

  Do you have simple fix for a stuck bug or a ant died inside behind the screen

• 
  @COGuyStuffАй бұрын

  It’s simple but a lot of work. You need to lay it flat carefully on the front side, and disassemble it completely. You’ll have to hopefully find a how to video or article for whatever your model is.

• 
  @brianhart6978Ай бұрын

  Thanks for sharing your findings, CO Guy. Question: when you take the measurement 8" directly in front of measurement #1, which circle are you marking/selecting in the software to indicate where you are measuring? There is a front right and front left circle, but not a "front middle" option. I understand where to put the mic for that measurement, I'm confused about what circle to select for that measurement. Hope this makes sense.

• 
  @COGuyStuffАй бұрын

  The circles are meaningless it’s just an illustration. The positions mean nothing other than the first one

• 
  @brianhart6978Ай бұрын

  @@COGuyStuff Thank you! Makes things much easier. Looking forward to following your recommendations.

• 
  @MarcusAsethАй бұрын

  love the sausage dog painting xD

• 
  @nickkentidie4478Ай бұрын

  Thank you mate.

• 
  @chandranagar6584Ай бұрын

  Where do you buy capacitor for year 2000 citizen watch? The citizen website doesn’t even recognize that old serial no or case number or model no

• 
  @Perfectly_Balanced930Ай бұрын

  Would you have to reapply the petroleum jelly after some time passes?

• 
  @COGuyStuffАй бұрын

  Nope

• 
  @kellyj5389Ай бұрын

  Good info

• 
  @VmaxfodderАй бұрын

  Flavacal is the #1 plenty of coconut oil is also king !

• 
  @stinger1268Ай бұрын

  Nice video. Curious, would you still recommend this amp (4 years later)?

• 
  @COGuyStuffАй бұрын

  100% they are flawless. I went to a larger model since this vid

• 
  @vegaskidd555Ай бұрын

  for black crush on 22 point. adjust brightness level 5 good or can i go higher

• 
  @rangersmith4652Ай бұрын

  I have two PB12 NSDs (not coupled) in my system, and I cannot imagine ever needing to "upgrade." Even using just one of them is really good. There is, for every category of audio component, a point of diminishing returns where the performance-for-the-money curve drops off sharply. For me, the PB12 NSD is right on the peak of that curve.

• 
  @COGuyStuffАй бұрын

  I hope you never hear a really good system ;). The nsd were. Great value back in the day. But the limits are far, far below pretty much anything else these days. One day you might want to do things you simply can’t now. Like pressurize the room. Or extend to sub sonic. Or play at reference level etc.

• 
  @rangersmith4652Ай бұрын

  @@COGuyStuff I have heard some really good systems, and I have no need to try to match them. My listening room is 17x19 with 9' ceilings, so not huge by any means. I play mostly classical music -- at an SPL that won't wake the sleeping baby next door. That's why I prefer sealed subs. That said, I have a "budget" ported sub in my living room and one in my gaming setup; they make sense for cinema and video games and sound good enough when played at sane levels. I hope the new sub has worked out for you.

• 
  @COGuyStuffАй бұрын

  The video you are commenting on is years old. I’m way past both of those.

• 
  @rangersmith4652Ай бұрын

  @@COGuyStuff I'm aware of its age.