Thank you for the rig rundown. It was very helpful and your playing is killer!! I can't wait to hear more so please post more videos!!
@fredfloyd342 ай бұрын
Saw only one good one.Phaze 90... Actually the phaze 100 is way better...the rest are noise makers.The power blast is cool.Had a yellow one.Cheaply made could never close the bottom panel right.
@Strangel723 ай бұрын
No uni-vibe?
@Lander-bo2rq3 ай бұрын
do the r28/c11 mod to the phase 90 to remove the depth and mid range, then you can get a classic phsycidelic script sound instead of a bad muddy tremelo sound with it
@fredericbriche32233 ай бұрын
De loin l'une des meilleures vidéos sur le sujet. Great sound, great job. Ty !
@stevelamb67203 ай бұрын
Probably one of the most useful videos I have seen describing floyd style setups.
@ScottTheNews4 ай бұрын
I love it mate.
@ScottTheNews4 ай бұрын
Excellent pedal board setup mate. You have given me good ideas
@hheidrick4 ай бұрын
Thanks for the video. Any reason why you aren’t using the colorsound Power boost anymore?
@veryhappy26815 ай бұрын
Very helpful in what pedals to use and what order to place each pedal .. thank you so much.. your a great guitarist that has clearly done so homework!
@LysanderLH8 ай бұрын
A bery well thought through rig you have created there. I had an early Mistress but the signal drop and noise was too much for me, so I bought a mini pedal (9v) and it works really well.
@anup_pinkfloydian9 ай бұрын
How does 1 get a tube driver sound with this pedal board?
@stratplayr69979 ай бұрын
Awesome video!! I'm starting to get into building a Gilmour-style pedalboard - you've given me lots of great information to go on!
@1973asdf10 ай бұрын
nice rig my friend! the tone was spot on! have you considered the GT-1000 Core?
@hafstrat Жыл бұрын
Revisiting this fabulous video. The clearest explanation of gain stacking, in relation specifically to David G, I have seen. Using this to help get the best out of my bedroom set up. ❤
@BorysOliinyk Жыл бұрын
How to do clean sound volume the same as overdriven/distorted volume? Did you use any boost for clean sound?
@key_session Жыл бұрын
Too bad ... there is no volume .. you can hear the strings from the neck ..
@philgitaar Жыл бұрын
So interesting. Nice helpful video. Thank you 😊
@hheidrick Жыл бұрын
Are all these pedals in front of the amp? Or do you put your modulation pedal in an effects loop? Thanks
@airxxxwolf Жыл бұрын
Alan, where in the signal chain does the Boss FS-7 foot switch go and what are you using it for?.....I didn`t see it in the wiring diagram.
@alantarpey5173 Жыл бұрын
It is connected to the ctrl jack of the DD500 and is used to move up and down through the banks.
@KYCDK Жыл бұрын
he used a univibe on breathe, neither a rotary nor a phaser (i guess univibe is technically a phaser, but it sounds very different)
@thesaj1110 Жыл бұрын
Is the RT-20 is at the end of your chain??
@mobydick3895 Жыл бұрын
I hope you wouldn't mind some questions about your rig. My intuition tells me that the Blues Driver is on a lot of the gain patches, yes? What function does that Boss A/B switch perform? Does your Volume Pedal function as a stereo unit? You have got a great rig there. Thanks for sharing!
@alantarpey5173 Жыл бұрын
Hi! You are right - the blues driver gets used a lot for gain stacking. The Boss A/B is used to change patches on the DD500. And the volume pedal works in stereo in as much as both the 'wet' and 'dry' signal paths run through it separately.
@mobydick3895 Жыл бұрын
So you are using RT-20 as the Univibe(?) and you mentioned this is what a Vent II might be used for as well?
@kyledonworth3845 Жыл бұрын
Loved this Alan, more in-depth run down of pedals and stacking please
@AndyCooper761 Жыл бұрын
Really interesting video! I tried wet/dry myself, which sounded awesome on stage but didn’t work as well as I’d hoped through front of house because successive sound guys didn’t get the balance right between the two amps - so my mix was always too dry. I’ve since gone back to a single amp, so that I can manage the delay/modulation levels myself via my presets. Always good to learn from other Floydy guitar players though! Thanks.
@splitwesti Жыл бұрын
You'll LOVE that wet/dry set up. I've got that set up through my Hiwatt/Hitone and Yamaha RA200. Sounds absolutely amazing. On a different level. Great video. I love learning new things. Based on your setup, I'm now going to add a few more pieces to my board and you have me rethinking the order on some of my pedals. Really liked that suppressor tucked underneath. Cheers mate
@alantarpey5173 Жыл бұрын
Thanks for your comments mate. I'm running the wet/dry rig now (check out my latest rig video), still a few tweaks to make but I love it! 🤘
@bobbyblue2632 Жыл бұрын
Are those fender noiseless pickups? If so are they vintage or hot? Thanks 🎸👍🙏
@alantarpey5173 Жыл бұрын
They're the stock noisless pickups that came in the 50th anniversary strat (vintage I think)
@stefanotonypellegrini1654 Жыл бұрын
Abbiamo la pedaliera molto simile 😁😁😁🎸🎸 Ottima presentazione e ottimi suoni 🎸🎸🤗bravo
@salvatoresanfilippo2528 Жыл бұрын
Ciao Alan, interessante la teoria dei guadagni. Ti chiederei un consiglio.. La mia pedaliera inizia con CS3 - Boost Med Drive - Muff Whren cuff - BD2 - Dist Nabla 1987 - Phase - Flanger - CHORUS 1 - CHORUS2 - DELAY 1 - DELAY2 - REVERB .. Suona bene .. Ma non riesco a far fischiare il Muff... Cosa consigli ? Complimenti per il tuo lavoro. Un caro saluto
@michaelwestrope4890 Жыл бұрын
Awesome 👍 man gotta do one of these days on your lap steel someday. Spot on man .
@klemennnn Жыл бұрын
Hi there. Any specific reason you use block logo dyna instead of script? Same question for the phaser.
@alantarpey5173 Жыл бұрын
Hey, sorry for late reply (don't spend much time on here!) No particular reason, just bought what I came across! I've actually replaced both now, you can see in my latest rig rundown video. 👍
@francoislouw181 Жыл бұрын
Actually Dave used a univibe for Breath
@c1arkj Жыл бұрын
So you put the rotary before the mistress and the phaser in the chain?
@c1arkj Жыл бұрын
What can you recommend as a substitute for the BOSS RT-20?
@alantarpey5173 Жыл бұрын
The Vent II sounds awesome, but expensive
@nicolasagrawal9474 Жыл бұрын
Fender Pinwheel is also a good alternative
@guyfawkes7041 Жыл бұрын
Fantastic Video Alan - well done mate. Great explanation and patch-samples of What? you use, Where? How? and Why? Brilliant! We have a Tribute Band here in NZ - The Pink Floyd Experience... and it's always a pleasure to spend an evening "experiencing" the sites n sounds of my favourite band and some of the Greatest Songs and Guitar Tones in History. I've been was extremely fortunate to experience Pink Floyd "Live" firstly, in Quadraphonic here in NZ at Western Springs Stadium... and my favorite concert of all time... in 1994, the Earl's Court "Pulse" concert - I get quite emotional re-listening to it - even after all these years! All the best for upcoming concerts you guys have planned... appreciate your efforts in keeping the songs, music and glorious tones of "The Greatest Guitarist Ever" alive to experience, since David's retirement from Pink Floyd Shows... Thank you!
@Hamza-cq5js Жыл бұрын
I would appreciate if you could let me know with which pedals the guitar tone in the final solo of the song Comfortably numb was made.
@alantarpey5173 Жыл бұрын
TBH I have no idea, but I imagine it's some combination of a Big Muff, Colorsound Power Boost and BK Tube Driver.
@Hamza-cq5js Жыл бұрын
@@alantarpey5173 Thanks for your estimate
@benjaminwoodrowmusic6070 Жыл бұрын
Rams head big muff rotary speaker and delay...he might have had the electric mistress on as well
@keysersoze3977 Жыл бұрын
Funny I have such a similar pedal board with the same book light and the mirror.. I have all my gain pedals going thru a NS2 also, game changer.
@c1arkj Жыл бұрын
Great video brother. Very informative in explaining the setup.
@matthewholme297 Жыл бұрын
Green ham n green UGGs he sounds like Thomas the tank
@pageluvva Жыл бұрын
I give this a 10/10. So interesting and great playing and those tones, damn! Much respect to ya.
@alantarpey5173 Жыл бұрын
Thank you!
@Hamza-cq5js Жыл бұрын
Larry's tunes respects
@diaosuarez1748 Жыл бұрын
Is very import the original amp for full catch the Gilmour final sound
@nikosfragosofficial Жыл бұрын
Very nice pedalboard!!!
@pajguitar Жыл бұрын
Hi Alan, are you able to advise on a Gilmour board im having putting together. Gigrig are building it - but i have to source the pedals. Ive always used a Clapton strat and driven the amp with no pedals apart from amulti effects thing i had for a cover band when i had to play songs by multiple bands ( and a wah ). Be very helpful to have a chat. take care
@alantarpey5173 Жыл бұрын
Hi PAJ. My best advice would be to watch some videos on the excellent youtube channel called That Pedal Show. But in general you need to be researching pedal order and gain stages - stacking your gain pedals. For Gilmour I'd recommend at the very least you'll need a compressor, some sort of tube screamer, some sort of big muff, a flanger, and delay. Also, check out gilmourish.com it's a fantastic resource. (And sorry for the late reply, I don't review my channel very often).
@sohailhines Жыл бұрын
Masterful. This song doesn't need the fastest playing technique but sounds terrible if all of the many bends aren't exactly to right pitch. Plus there's the speed of the bend and release that needs to be just right. So many other covers of this song don't get this right. Would love to find out more about your setup, thanks!
@alantarpey5173 Жыл бұрын
Thank you! There are a couple of rig rundown videos on my channel you might like.
@13aphomet Жыл бұрын
Fantastic board!! Impressive!!
@bcp5296d Жыл бұрын
I wonder what the total cost of this board is?
@javierarias1199 Жыл бұрын
nice board...so practically you use the TS and the BD for boosting solos ??? thanks for the buffer tip, I have one and do not know where to place it...I've read that buffers can affect muffs/fuzzes...do you hear any changes? thanks
@mobydick3895 Жыл бұрын
You could put a tuner/buffer at the end of the chain, that woul simultaneously give you the tuner, buffer and mute function all in one pedal.
@RamonZarete Жыл бұрын
Great demo - great tones and playing👌!! Thanks for this!!
@oxnegative Жыл бұрын
I would trade BD2, OD1 and TS9 for a Tube Driver Chandler, I maded it, Tube Driver is irreplaceable for Gilmour tones, you are incredible plaiyng BB King.
Пікірлер
Thank you for the rig rundown. It was very helpful and your playing is killer!! I can't wait to hear more so please post more videos!!
Saw only one good one.Phaze 90... Actually the phaze 100 is way better...the rest are noise makers.The power blast is cool.Had a yellow one.Cheaply made could never close the bottom panel right.
No uni-vibe?
do the r28/c11 mod to the phase 90 to remove the depth and mid range, then you can get a classic phsycidelic script sound instead of a bad muddy tremelo sound with it
De loin l'une des meilleures vidéos sur le sujet. Great sound, great job. Ty !
Probably one of the most useful videos I have seen describing floyd style setups.
I love it mate.
Excellent pedal board setup mate. You have given me good ideas
Thanks for the video. Any reason why you aren’t using the colorsound Power boost anymore?
Very helpful in what pedals to use and what order to place each pedal .. thank you so much.. your a great guitarist that has clearly done so homework!
A bery well thought through rig you have created there. I had an early Mistress but the signal drop and noise was too much for me, so I bought a mini pedal (9v) and it works really well.
How does 1 get a tube driver sound with this pedal board?
Awesome video!! I'm starting to get into building a Gilmour-style pedalboard - you've given me lots of great information to go on!
nice rig my friend! the tone was spot on! have you considered the GT-1000 Core?
Revisiting this fabulous video. The clearest explanation of gain stacking, in relation specifically to David G, I have seen. Using this to help get the best out of my bedroom set up. ❤
How to do clean sound volume the same as overdriven/distorted volume? Did you use any boost for clean sound?
Too bad ... there is no volume .. you can hear the strings from the neck ..
So interesting. Nice helpful video. Thank you 😊
Are all these pedals in front of the amp? Or do you put your modulation pedal in an effects loop? Thanks
Alan, where in the signal chain does the Boss FS-7 foot switch go and what are you using it for?.....I didn`t see it in the wiring diagram.
It is connected to the ctrl jack of the DD500 and is used to move up and down through the banks.
he used a univibe on breathe, neither a rotary nor a phaser (i guess univibe is technically a phaser, but it sounds very different)
Is the RT-20 is at the end of your chain??
I hope you wouldn't mind some questions about your rig. My intuition tells me that the Blues Driver is on a lot of the gain patches, yes? What function does that Boss A/B switch perform? Does your Volume Pedal function as a stereo unit? You have got a great rig there. Thanks for sharing!
Hi! You are right - the blues driver gets used a lot for gain stacking. The Boss A/B is used to change patches on the DD500. And the volume pedal works in stereo in as much as both the 'wet' and 'dry' signal paths run through it separately.
So you are using RT-20 as the Univibe(?) and you mentioned this is what a Vent II might be used for as well?
Loved this Alan, more in-depth run down of pedals and stacking please
Really interesting video! I tried wet/dry myself, which sounded awesome on stage but didn’t work as well as I’d hoped through front of house because successive sound guys didn’t get the balance right between the two amps - so my mix was always too dry. I’ve since gone back to a single amp, so that I can manage the delay/modulation levels myself via my presets. Always good to learn from other Floydy guitar players though! Thanks.
You'll LOVE that wet/dry set up. I've got that set up through my Hiwatt/Hitone and Yamaha RA200. Sounds absolutely amazing. On a different level. Great video. I love learning new things. Based on your setup, I'm now going to add a few more pieces to my board and you have me rethinking the order on some of my pedals. Really liked that suppressor tucked underneath. Cheers mate
Thanks for your comments mate. I'm running the wet/dry rig now (check out my latest rig video), still a few tweaks to make but I love it! 🤘
Are those fender noiseless pickups? If so are they vintage or hot? Thanks 🎸👍🙏
They're the stock noisless pickups that came in the 50th anniversary strat (vintage I think)
Abbiamo la pedaliera molto simile 😁😁😁🎸🎸 Ottima presentazione e ottimi suoni 🎸🎸🤗bravo
Ciao Alan, interessante la teoria dei guadagni. Ti chiederei un consiglio.. La mia pedaliera inizia con CS3 - Boost Med Drive - Muff Whren cuff - BD2 - Dist Nabla 1987 - Phase - Flanger - CHORUS 1 - CHORUS2 - DELAY 1 - DELAY2 - REVERB .. Suona bene .. Ma non riesco a far fischiare il Muff... Cosa consigli ? Complimenti per il tuo lavoro. Un caro saluto
Awesome 👍 man gotta do one of these days on your lap steel someday. Spot on man .
Hi there. Any specific reason you use block logo dyna instead of script? Same question for the phaser.
Hey, sorry for late reply (don't spend much time on here!) No particular reason, just bought what I came across! I've actually replaced both now, you can see in my latest rig rundown video. 👍
Actually Dave used a univibe for Breath
So you put the rotary before the mistress and the phaser in the chain?
What can you recommend as a substitute for the BOSS RT-20?
The Vent II sounds awesome, but expensive
Fender Pinwheel is also a good alternative
Fantastic Video Alan - well done mate. Great explanation and patch-samples of What? you use, Where? How? and Why? Brilliant! We have a Tribute Band here in NZ - The Pink Floyd Experience... and it's always a pleasure to spend an evening "experiencing" the sites n sounds of my favourite band and some of the Greatest Songs and Guitar Tones in History. I've been was extremely fortunate to experience Pink Floyd "Live" firstly, in Quadraphonic here in NZ at Western Springs Stadium... and my favorite concert of all time... in 1994, the Earl's Court "Pulse" concert - I get quite emotional re-listening to it - even after all these years! All the best for upcoming concerts you guys have planned... appreciate your efforts in keeping the songs, music and glorious tones of "The Greatest Guitarist Ever" alive to experience, since David's retirement from Pink Floyd Shows... Thank you!
I would appreciate if you could let me know with which pedals the guitar tone in the final solo of the song Comfortably numb was made.
TBH I have no idea, but I imagine it's some combination of a Big Muff, Colorsound Power Boost and BK Tube Driver.
@@alantarpey5173 Thanks for your estimate
Rams head big muff rotary speaker and delay...he might have had the electric mistress on as well
Funny I have such a similar pedal board with the same book light and the mirror.. I have all my gain pedals going thru a NS2 also, game changer.
Great video brother. Very informative in explaining the setup.
Green ham n green UGGs he sounds like Thomas the tank
I give this a 10/10. So interesting and great playing and those tones, damn! Much respect to ya.
Thank you!
Larry's tunes respects
Is very import the original amp for full catch the Gilmour final sound
Very nice pedalboard!!!
Hi Alan, are you able to advise on a Gilmour board im having putting together. Gigrig are building it - but i have to source the pedals. Ive always used a Clapton strat and driven the amp with no pedals apart from amulti effects thing i had for a cover band when i had to play songs by multiple bands ( and a wah ). Be very helpful to have a chat. take care
Hi PAJ. My best advice would be to watch some videos on the excellent youtube channel called That Pedal Show. But in general you need to be researching pedal order and gain stages - stacking your gain pedals. For Gilmour I'd recommend at the very least you'll need a compressor, some sort of tube screamer, some sort of big muff, a flanger, and delay. Also, check out gilmourish.com it's a fantastic resource. (And sorry for the late reply, I don't review my channel very often).
Masterful. This song doesn't need the fastest playing technique but sounds terrible if all of the many bends aren't exactly to right pitch. Plus there's the speed of the bend and release that needs to be just right. So many other covers of this song don't get this right. Would love to find out more about your setup, thanks!
Thank you! There are a couple of rig rundown videos on my channel you might like.
Fantastic board!! Impressive!!
I wonder what the total cost of this board is?
nice board...so practically you use the TS and the BD for boosting solos ??? thanks for the buffer tip, I have one and do not know where to place it...I've read that buffers can affect muffs/fuzzes...do you hear any changes? thanks
You could put a tuner/buffer at the end of the chain, that woul simultaneously give you the tuner, buffer and mute function all in one pedal.
Great demo - great tones and playing👌!! Thanks for this!!
I would trade BD2, OD1 and TS9 for a Tube Driver Chandler, I maded it, Tube Driver is irreplaceable for Gilmour tones, you are incredible plaiyng BB King.