Stuff I do when I'm feeling bored, crazy or annoyed, plus a look inside some of the rarer or more unusual tech you're less likely to encounter.
Font used for titling in most newer videos is OpenDyslexic, free to download and use from opendyslexic.org/
Пікірлер
With a wire go to E1 and TF together with the ignition on ok let see if I can do this and find it as an old lady here. I just got his car as a gift paid around $600 with DMV and insurance. I was given to save money 🤑. Yeap it was raining and it came on with check engine light too gosh. Can I return the plates and cancel all and get my money back with the DMV and insurance?
Thank you so much ❤
İlk Çıktığı yıllarda kullanma şansım olmuştu , muhtemelen özelliklerini ayarlayamadınız NV-GS400 Bu kadar kötü bir kamera değildi
Pretty cool if that was legit. But it didn't teach us anything.
Of all the comments that made no sense, yours didn't make sense the most.
@@AintBigAintClever Cool, appreciate it!
I converted mine to12v yo these battery's 9Ah x 8=96AH I'm not finishing the battery power
Speedometer don't work
That'd be a completely different fault with a completely different solution.
@AintBigAintClever ill try this first thank u.
My Noco GB70 have never worked, just runs the light and make the click click click sound. In the 5+ years I have had it and 20 - 30 start tries it has never started anything at all...
My damn 04 gs430 has a different drivers door from a 99 so I don’t think I’m ever getting my moneys worth thst I spent on a key with buttons
I replaced my alternator and it went away
Battery also at the same time so just make sure the ecu cant get any power for while and it will reset
Holy shit thank you so much. After removing the lance, shaking the washer around trying to clear the airlock. This is what worked!!!
Bro this shit stopped working for two years until I found this video 💀💀 I got tired of not being able to use this old laptop so I’m super glad I stopped being lazy and did this. You’re the GOAT 🙌🏻
Appreciate the help brother ! Cheers 🍻!
You did this past 1 am? You must have very patient neighbors. lol
Where did you get that? Did you get enough subscribers to have KZread send it to you or did you buy it somewhere? if you bought it I'd like to know where because I want one.
I got an email from KZread in May, inviting me to sign up at the Rewards Hub (with a unique code, so it looks like it's invite-only). I signed up a few hours later and this limited edition light was on there as a free gift. I went for it, it arrived a few days ago. I expect some will find their way onto eBay soon enough.
@@AintBigAintClever I'm just worried about scams. I won a CO2 powered salt gun from that company that makes those salt guns you shoot flies with and I was skeptical until they messaged me on FB messenger saying I won their caption contest so I gave them an address and they sent it out. Got it a few days later but haven't tried it yet, not enough bugs to shoot.
Just got an 06 Honda CR-V that has one on it. Looks like a dealer addon. I'm thinking I can just disconnect the battery terminal wire to stop the drain without harming the car. Thoughts?
Yeah. Insulate and tape-up the connection so it can't touch the bodywork.
@@AintBigAintClever Was able just to unplug it from the primary module. all LEDS went out. No tools. No more battery drain. Easy peasy.
👍 Is it IBM-compatible (Apple II)? Are games played on it? Run a couple of games on it. Are there color modes? Is it possible to change the video card on it to a better one?
glasstty.com/category/80-bus/
That touch dim feature is pretty smart like apple's ring control. :)
So they can just get away with calling a plastic tube full of LEDs "neon" now? That's just _wrong_ but I guess nobody cares? It's neon-ish, neon adjacent, but it's _NOT_ neon so why call it neon? It has nothing at all to do with neon other than a vague resemblance. It's like neon with no "soul." I LOVE (real) neon and I think it's a shame for this imitation stuff to get away with hijacking the name. The phony neon stuff ("phoneon?") is indeed cool in it's own way. Sometimes it can even change color. It deserves its own name. But... I guess it's just another example of the _"bandwidth limited"_ way so many people engage with the world around them. It's "close enough" for them, you know, like homophones: "Meh... sounds the same so who cares witch [Sic] word you use."
And this service is called You"Tube" despite most of us watching it on flat screens with no vacuum inside. And we follow "channels" despite not tuning a circuit to a specific part of the electromagnetic spectrum before watching. And we "subscribe" despite not receiving a single item in the mail. And we "comment" without uttering a single word with our mouths.
I don't know if I would immediately recognize it as a KZread logo. It would have to be solid red, not like one of those bladeless dyson fans.
Is it just me or everything past the 5:40 mark up to 13min just a blank video?
yeah it is
Oh FFS, it's rendered an entire bloody blank bit, I should've checked before uploading. I'll see if I can chop it.
I spent one week trying to figure out the problem, updating drivers, it drove me nuts. The ForcedUSBMode worked for me. Thanks so much!
Make a schematic
The newer HC is all over the NV model. Far more natural colours and better light use, especially at twilight. Tech and values moved fast
Thank you! Thank you! Thank you! As only a moderate-level user I had to watch this video about 7 or 8 times, going back over and over some portions, but I finally got it to work! I am using an 8 year old Macbook Air that works fine and I see little reason to upgrade as long as I can get done what I need to. I run OSX El Capitan 10.11.6 because that's all it will take. (I was told I could have a tech force a newer OS but that I might lose functionality. No thanks.) I just back this machine up and will upgrade when it gives up the ghost entirely.
Thank you for this video! I have problems with my Wifi USB-Card from time to time. It works most of the time but if it doesn't, it keeps disconnecting every couple of seconds. I already downloaded a driver from the manufacturer's page (mine is from Maxesla), but that didn't seem to help. I tried reproducing the steps in regedit, but didn't have ForcedUSBMode or the following ones. After downloading the driver from the description, those entries are now there. If the new driver didn't fix the problem already, I know where to return to. :)
Mines is smoking what should I do
Does this work for 400’s too?
I'd expect it to work on any Toyota/Lexus vehicle of around the same age.
Not every clock looks like that bad. Here i have this which circuit is not same to you it has two circuit. 1 is on the top, and another is on back. But the body design is same to you
Very weak motor
Mine connects to usb 3 but is still slow, the internet only works on a 2.4ghz connection too, if i connect the the 5ghz it connects with no internet, is this a driver issue?
That's an odd one. Does it connect properly at 5GHz if used at USB 2.0 speed? Worth trying different drivers, worth trying on a different computer if you can.
Thank you so much for useful information :)
I am unable to get my IS2000 -00 into programming mode. Any clues?
Can't believe it! It worked!!! Thanks a bunch
Hi - Just been given a metrohm so your hard work regarding the circuit and operation is really appreciated. The circuit is more complex than I was expecting. I have yet to test it as I first need to source a suitable mini Bulgin mains plug. Well done you must have spend many hours working it out.
you are amazing i cant thank you enough
I'm having an issue where i can force the usb to the value of 2 from zero, however it disconnects and reconnects my device. But similar to @sebek819, i don't have the USB mode 3.0 folder. Have you any advice to fix this?
Very nice demonstration of "reverse engineering". 😊
I try my best :) It's also a good way of picking up little titbits of knowledge. When you work out the schematic you're looking for how it works. If it looks like it wouldn't work, chances are you've missed a track or messed one up. If I need a reverse polarity protection circuit I'll probably dig this schematic back up and look at how it was done here.
Willl try it on my Lexus RX 400 hybrid. I hope it works. Thanks
NOCO is all marketing. I have two and they were both junk before the warranty expired. The cost to use the warranty is more than the cost of a competitor unit.
1:58 It's time to turn the key switch
Tried it on 5/4/2024, in chrome, using both no spaces and & spell=1. No longer works.
Thanks for this but what is the procedure to clear the current keys saved?? Turn the key 2 times and what after that ?
I can't find my instructions at the moment but I *think* the next step is to add one of the keys you DO want, the difference is that this will now become the first key in the car's list rather than an additional one. So the only difference in process from start to finish is that one additional turn of the key partway through.
Hi Ain't Big Ain't clever and everyon. Do you where I can find the diagram for a Rugdoctor mp-c3 please, I have looked & looked but can't one, there's plenty with the switches in the handle but I can't find a diagram like the mp-c3 with the switches in the main body of the machine. Great video thankyou.
I've just looked and I see what you mean, the X3 manual has the switches in the handle but the photos on eBay have it on the lid. Take a look at the Wide Track manual available here, scroll down and there are diagrams showing what plugs in where. shop.usaclean.com/parts-and-supplies/rugdoctor/mighty-pro-wide-track/#section-docs
@Aintbigaintclever perfect exactly what I needed thankyou my fellow cdiffian I'm guessing by accent.
Valleys actually, butt :)
@aintbigaintclever The wiring diagram to the main body clearly shows the motor but it doesn't seem to show the 2 switches, please help if you can thankyou.
@@sloopycat1954 the X3 service manual has the switch wiring diagram, I expect Rug Doctor will use the same switches across their range (and DPDT rockers are pretty standardised) so whether in handle or lid the diagram ought to be the same.
Thank you so much. Changing ForcedUsbMode finally solved the problem for my TP-Link T4U Adapter. The USB options for the UI do not exist, but the important part works. Thumbs up!
😁😁😁
Worked for my VP698 thanks
Without the mouthpiece, it makes the engine sound when the mouthpiece is inserted, it stops, is there a link to purchase these parts?
Will this work for a 2009 Lexus LS460?
Dear Sir, It’s possible to have a copy of this schematics. Thanks
drive.google.com/file/d/1jcroeTIBlILUaJvaGBQPGPSw1ppL7jgR/view?usp=drive_link
This might be asking a lot, but i have fluke 650 lan cablemeter, but I'm missing the 650R remote, any chance to get a high res pics of the both the back and front of the pcb?, want to try make my own replacement , i know if you gave the front already but yeah, also what is the green rectangle block between the relays and transistor array? and any idea what the zener diodes are? value wise? are they used for breakdown voltages perhaps? or just signalling ?
I'll see what I can do. I don't think board photos would be sufficient as there'll be tracks under the relays, but I should be able to borrow the unit from work again and pop open the remote to see what's what.
@@AintBigAintClever that would be amazing! but yeah if its not too much it would appreciative maybe allow other ppl to build there own but yeah dont think i'll get support from fluke for something this old i dont think
@@Xfixiateher drive.google.com/file/d/1cGlGGGBPzsRVcUS_0h8CplVbqkPzuMIK/view?usp=drive_link
@@AintBigAintClever oh my! This is waaay more than you had to do wow! did you make this? This is amazing
@@Xfixiateher download it again, I've added a third page with a circuit analysis. I finally remembered to grab the tester yesterday afternoon, took a few hours to trace the schematic based on following tracks, some continuity checks and manually setting the relays. This morning I've looked at the schematic to work out what it's doing, which helps determine if I've missed any tracks out, I've also tweaked the layout slightly to make the K2 connections clearer. I think it's all correct.