Пікірлер

• 
  @gedfitzsimmons34602 күн бұрын

  This is how you do a helpful video on youtube. Many thanks.

• 
  @Ashhhh7136 күн бұрын

  You saved my life, this video is still relevant. THANK YOU SO MUCH!!

• 
  @nim_196 күн бұрын

  You’re my hero

• 
  @timemaster.mm27 күн бұрын

  when I click open in, it says my file can’t be downloaded, so I’m not sure what to do from there, any help?

• 
  @JayWalsh12 күн бұрын

  If youre on an older camera (my case, the X-T3) you'll have some workarounds. 1. You won't see the red dots on your changes. 2. Once you've input your recipe, press the LEFT button on the back of your camera. You'll then be prompted to SAVE your setting. 3. The +/- RB buttons don't work in the edit mode. After you've saved your recipe go back to SELECT SETTING and then go to WB. Choose the same WB for your recipe and press the RIGHT button on the back of your camera. Then you can access the RB settings. NOTE: you can only set one RB setting per WB setting. Meaning, if you set it for AUTO WB, then every recipe using AUTO will have that setting. But you can set a different one for each setting (Auto, Daylight, Kelvin, etc).

• 
  @JohnChubbSr5 күн бұрын

  Thanks!

• 
  @carminedepaola801812 күн бұрын

  If i have 4 mobitors, i can use davinci resolve on a 4 monitors setup ?

• 
  @asafdayan290015 күн бұрын

  its not really working on my x-h2s.

• 
  @ChillinHD17 күн бұрын

  I dont need window management i need this exact same concept except its virtual monitors not windows. Do you or anyone know any free software that can do that? I would use fancyzone but it doesn't allow to fullscreen within the zone. Im thinking with virtual monitors ill be able to fullscreen within the "zone"

• 
  @AbrassiveMandrake17 күн бұрын

  Thank you for that Tool explanation. Would it work for gaming as well to create a 16:9 section in the middle to run the game and then have sections left and right instead of black bars?

• 
  @user-nx6uc9ee4z18 күн бұрын

  Thank you mate!!! this was very helpful

• 
  @MartinPatoine19 күн бұрын

  I am not sure to understand the difference between Fancy Zones and Display Fusion... I can do the exact thing you showed with Display Fusion and even more!

• 
  @andyvan569220 күн бұрын

  this Umbrella softbox also has a disc with it, acting like a beauty dish, this should help remove any hot spots, and re-direct this wasted light into the body, upping the power of the light, if you didn't have this, that could be the reason, the high contrast of the main and diffused beams, instead of a softer light which wraps around more.

• 
  @andyvan569220 күн бұрын

  at 4:14 what you are describing sounds like things affected by the light, Broncolor Paras are the same, if the light is RECESSED, aka not like broncolor or profoto Pro heads, aka Like Godox AD400 style, the light can't 'expose' all of the reflective surface, and also these modifiers are designed with a certain W/sec. power input, that is to say don't expect full spec. out if you only have a speedlight lighting it, these big (133/177 para, or 150cm and above) modifiers need 400W\s minimum, and under ideal conditions a 1600 or 3200 W\s pack, like a broncolor Satos, Scoro packs or Siros mono lights to get full output performance [there is light lost in the box, and ~2 ish stops from the combined diffusion cloths]- this is why there are ideal power inputs, but also so the cloth materials used don't overheat some of them aren't 'pro' capable, good for spaced out use, but not with high power lights, going like a pro portrait or high glamour fashion shoot.

• 
  @RayRift22 күн бұрын

  hiya man! Hey, I'm getting a little frustrated over here. How does this thing even work!? There's no charge indicator led. I try to turn it on and it shakes like hell while asking me to pick English or Chinese, but then just shows an empty battery and dies. WHAT THE F#@$%!? Fresh out of the box. How do I even use it!?

• 
  @ytdf197224 күн бұрын

  Exactly what I was looking for. Thanks

• 
  @vinhsanity25 күн бұрын

  I think I’m gonna go with this over the Edelkrone

• 
  @wholesometeddy27 күн бұрын

  Thank you very helpful

• 
  @60SecondLegoАй бұрын

  btw some file types aren’t supported and the “save video” option won’t appear. For example, I had to change MTS to MOV and it worked.

• 
  @borhanzoufan5909Ай бұрын

  very nice, what kind of screen is your big screen

• 
  @JackStanistreetАй бұрын

  I'm assuming I'm not the only one struggling with lag? Any solutions? I'm using USB-C to USB-B (camera to PC).

• 
  @DivineLimits-g3oАй бұрын

  I can't find the codes not the web page?

• 
  @ThisnotmysandwichАй бұрын

  Doesn't work on XE-2 model. Not able to save custom white balance values; e.g., stuck on default R:0 B:0

• 
  @xpusostomosАй бұрын

  Would 65" be a bridge too far? It's like 4 x 32" monitors

• 
  @ChrisWatkinsMediaАй бұрын

  Personally I wouldn’t go bigger than a 55 inch

• 
  @user-xg2dw8bf5nАй бұрын

  nah, you didn't show everything, what will happen if you press FULL SCREEN on one of the 4 windows? Thats my problem, it will go again over full display....

• 
  @jacobm533421 күн бұрын

  Yes well, full screen means that, the full screen will be used… Windows doesn’t really support virtual monitors that well. I’m sure a google search will find a solution.

• 
  @DerasolisАй бұрын

  Why can't all videos on KZread be like this content? Amazing, no clockbait, no begging, straight to the point! Amazing and keep up the good work, my subscription you got!

• 
  @clementj_Ай бұрын

  Thanks for the tutorial! However, I have a small issue: when I want to put a KZread video in full screen while I have defined a specific zone, the video goes full screen on the entire screen instead of just the defined zone. How can I fix this?

• 
  @astrid4275Ай бұрын

  i can't press the save the changes button. it's grey out, idk what to do, please how can i click the save button

• 
  @KimberliahcocoaАй бұрын

  I had this issue, too. Try resetting your camera first, then input the simulation recipe. Menu > wrench > user settings > reset > set up reset

• 
  @emabrkicАй бұрын

  Sorry but did you figure this out? I’m having trouble for days now and just can’t figure it out. I’ve done the full reset and still nothing

• 
  @KimberliahcocoaАй бұрын

  @@emabrkiceach setting should be marked with a red dot when changed. Does that happen for you? If not, that’s an indicator that the saving function is blocked. Not sure why that is, though.

• 
  @tomkryzz26 күн бұрын

  EDIT: I found out why. Most probably you have like me AUTO UPDATE CUSTOM SETTINGS on enable. The save option is greyed out for me too, also there are no red dots, when I make changes, BUT the custom settings are saved anyway.

• 
  @bala1000minaАй бұрын

  Thank you Chris for sharing, loved the second look of course! Good luck man!

• 
  @DicktopusАй бұрын

  Thank you

• 
  @StarshipAlvesАй бұрын

  Thanks for the video, I'm definitely going to be using this every day. I only wish that the apps could stay in their zones when you "full screen" them... would be neat for my live video feeds.

• 
  @alifeofimagesАй бұрын

  Thanks Chris very helpful one thing I came up against is that the save settings was greyed out on my T5. However, it seems to save the settings very odd not sure of its a firmware bug.

• 
  @joe99173122Ай бұрын

  Hi Chris, question for you: if you wanted to share the centre "priority zone" (for example) in MS Teams, and show the whole zone, not just the application window, would that work?

• 
  @ChrisWatkinsMediaАй бұрын

  Not organically no… but you could use OBS virtual camera for that…

• 
  @hoanao2835Ай бұрын

  bruh my camera dont have grain effect option and many others options too

• 
  @chicagoanglerАй бұрын

  Is this adding to the already existing film sims, or is it editing and replacing one of the film sims?

• 
  @totsukanoyata1394Ай бұрын

  Your film simulation look so good, can you share it too sir😁🙏🏽

• 
  @chinedujames638Ай бұрын

  How were u able to hang these other monitors sir??? 🤔🤔🤔🤔

• 
  @Bonnie-ep6xiАй бұрын

  Y won’t it save to my gallery

• 
  @tommartinnoticias2 ай бұрын

  NICE REVIEW

• 
  @WTFBI52 ай бұрын

  thats not working if u want to use the individual sections in Full screen mode

• 
  @terrancewu52802 ай бұрын

  can i be gaming and looking at youtube ?

• 
  @joriandrake2 ай бұрын

  I'm considering to purchase a LG 55'' 138 cm QNED UHD 4K Smart TV for the same reason, as monitor. Would you think it is good? I mean not due to size, but quality and refresh rate.

• 
  @Plague_Captured2 ай бұрын

  I think if you can external record to the monitor it will let you record 4K with af tracking

• 
  @soulmate.attraction2 ай бұрын

  You cannot connect Blink 500 Pro to a smartphone. You need a whole separate receiver for that...

• 
  @jonnyleemills2 ай бұрын

  Thanks, any reason why Clatiry is grayed out for me? Cheers

• 
  @PaulJohnsonUK2 ай бұрын

  Is there not a way to do this on your computer and then sync them to your camera? Or download them from somewhere and install? Surely this is possible.

• 
  @ChrisWatkinsMedia2 ай бұрын

  Unfortunately not.

• 
  @KidzPlayhouse4932 ай бұрын

  "Can’t the Sony camera run out of battery if you live stream for a long time, for example, during gaming live streams, or is the camera charging while connected to a PC or laptop?"

• 
  @Dudleydogg2 ай бұрын

  this is old has anything changed between the 2 options ?

• 
  @kelvinalbert772 ай бұрын

  Can i do this using Sony DSC H300?

• 
  @SectorZeroGP2 ай бұрын

  And with the same camera that i have :´D Thank you bro, here is another like for your video :´3

• 
  @AdamSternberg2 ай бұрын

  Unfortunately neither of these worked