Any ideas on why it overheating only on highway never in town has new thermostat I already pressure tested it all good there if I slow down on the highway to 60 it goes down I'm baffled by it
@ostromadventures4 күн бұрын
@@LloydMcKinley-e3o I’m not sure mine was totally opposite of that. Do you have winch or mud build up that could be blocking the radiator? Good luck in finding the issue.
@jwlee97917 күн бұрын
I have the exact same model 2014 JK. Love it!
@ostromadventures6 күн бұрын
@@jwlee9791 ✌️such awesome vehicles! Thanks for the comment
@gilmerod86357 күн бұрын
Do you know how much it weighs? This is awesome!
@ostromadventures6 күн бұрын
@@gilmerod8635 I haven’t taken it to the scale yet but I’m estimating around 700 lbs. tongue weight is alittle to lite, will add spare tire to front to help weight it down. Right now I can lift very easy by hand.
@sdnlawrence56407 күн бұрын
Nice little camper. Good job, excellent budget.
@ostromadventures7 күн бұрын
@@sdnlawrence5640 thank you!
@clevelandwalker13367 күн бұрын
What’s the lift size?
@ostromadventures6 күн бұрын
@@clevelandwalker1336 3.5”
@glendawilliams40358 күн бұрын
Had a 2012 Wrangler and it had very few repairs, just minor stuff. It had 200,000 miles on it. Just purchased a 2024 and as I drove It home the engine light came on. 😳 Brought it back and they said it had needed a computer update. Picked it up and as soon as I got on the freeway the engine light came on again.😡 Brought it back and waited 3 weeks for new O2 sensors. I've had it back for a few days now and all seems well. Just hope it stays that way!
@ostromadventures8 күн бұрын
@@glendawilliams4035 wow 200k. Sorry to hear about the issues with your 2024. Hopefully your new one goes the 200,000 miles also. 👍 Thanks for your comment! ✌️
@7996hobguy8 күн бұрын
Northern Indiana (Laporte) as well. Where did you source the windows and door?
@ostromadventures7 күн бұрын
@@7996hobguy I tried to find him on Facebook marketplace again but couldn’t find the ad. If I come across it again I’ll send it to you. Lucky in our area there are a lot of options with the rv manufacturers close to us in Elkhart. I was at an rv surplus store in Orland Indiana last week and they had some good doors and windows. It’s called Newsoms rv surplus. Facebook marketplace is great at finding parts. Good luck in your search and have fun
@F-N-C10 күн бұрын
Nice dude! I'm torn on using foam like you did or just using plywood. I have the same trailer too.
@ostromadventures10 күн бұрын
@@F-N-C thanks! Below is a link to one that I made with 2x2 and plywood.. that trailer was more of duty so I wasn’t worried about weight as much. Either way both turned out good and I had a lot of fun building them. Enjoy your build!
@@richarde6911 yea 2X2 construction works fine On another trailer build that’s what I used. Below is the link - kzread.info/dash/bejne/h4CDyKOhibCYaNo.htmlsi=lH5Dmd_C3BWTYJUc
@jeremym394825 күн бұрын
Im in indiana also. What was the name of the place u got the doors and windows from?
@ostromadventures25 күн бұрын
@@jeremym3948 it’s a guy off of Facebook marketplace. I’ll try to find his name and forward it to you. It in Michigan about 30min north east of Michigan City, IN.
@juliansolomon855Ай бұрын
Looks pretty good, where did you get the tires from? And did you have to upgrade to a longer axle to fit? I have seen alot of people saying they had to upgrade the axle to fit larger tires for better clearance
@ostromadventuresАй бұрын
@@juliansolomon855 I purchased the tires and wheels as a package off of Amazon. I did not upgrade the axle, just got 3/4” wheel spacers. Thanks!
@Nomaswearefull20 күн бұрын
I'd get some bearing buddies and feel for heat on longer hauls. Nicely done
@ostromadventures20 күн бұрын
@@Nomaswearefull thanks I’ll check into that. Appreciate it.
@ostromadventuresАй бұрын
Very little road noise with a nice A/T tread.
@ostromadventuresАй бұрын
I purchased on simpletire.com
@napcopАй бұрын
Did you install a fairlead backing plate? Curious; i have the same bumper
@ostromadventuresАй бұрын
@@napcop no just the winch plate that came with the bumper.
@ostromadventuresАй бұрын
When we were there it was $8 per person to do the alpine slide. So much fun!
@ryanmcdougall22Ай бұрын
Nice job, looks great!
@ostromadventuresАй бұрын
Thank you!
@367spartanАй бұрын
Pretty cool. I'm really curious about the foam panels. Are those just your regular foam panels that would be used for insulation? I can't believe they're strong enough for something like this.
@ostromadventuresАй бұрын
Thanks, I am surprised how strong it is with the foam but it is super strong. I’ve taken it through ditches and driving on highway at 75 and there has been no flex or movement. I did use more 2x4s for support then most that make these.
@ostromadventuresАй бұрын
Site correction- G07 Second site here was fine but not as nice as first time.
@bendriskell4109Ай бұрын
Where did you get the pvc trim?
@ostromadventuresАй бұрын
Menards, it’s in section with outdoor siding trim. It worked really good it’s just alittle expensive.
@beetlebaileyАй бұрын
I know you made this video a year ago. Have you had any more issues with overheating?
@ostromadventuresАй бұрын
No but we are coming into summer, last summer it was good. Hoping it is the same this year, if any issues come up I’ll reply back to the message. Thanks!
@beetlebaileyАй бұрын
@@ostromadventures so this weekend I’m going to be changing out the thermostat for a 180° thermostat.. and if this doesn’t fix the problem, I will probably go with a temperature sensor and a new radiator. Probably a three core instead of the OEM.
@beetlebaileyАй бұрын
@@ostromadventures my problem only happens when I’m at highway speeds when I slow down or stop it doesn’t overheat
@ostromadventures2 ай бұрын
Home Depot no longer does the rebate as of 2024! 😢
@tugguy853 ай бұрын
So I take it they are worth it
@ostromadventures3 ай бұрын
Yea so far they are working out great and definitely worth it for price.
@firstlast---3 ай бұрын
Looks good
@ostromadventures3 ай бұрын
Thank you!
@robertvargas3643 ай бұрын
Awesome getting mine done asap thank you
@ostromadventures3 ай бұрын
Hope it goes good; mine still look good going on two years. There is only one that I will probably have to redo maybe next year.
@gumby00787 күн бұрын
Was there any alignment issues pulling the entire hinge off?
@justinkaczor7343 күн бұрын
Same question about installing the hinges back on. I tried adjusting the driver’s side rear door when I put the nylon sleeves in the hinges and had issues getting the door to fit properly after. Any tips? My lowers are rusted and bug me on my silver Jeep
@ostromadventures3 ай бұрын
Should be complete in another week. Look for more videos of build with expense breakout and building process.
@Sctvita4 ай бұрын
Jellystone Park the Camp Resort is Opening of Summer until May 24. 😮
@ostromadventures4 ай бұрын
That stinks.
@Sctvita4 ай бұрын
@@ostromadventures oh no!
@squirrelnutz22094 ай бұрын
This makes me have goosebumps 💀💀💀
@ostromadventures4 ай бұрын
www.gogginschallenge.com
@JoseCastillo-eh1yd4 ай бұрын
I have a 2017 xd Diesel 26,000 miles almost traded it for a Ram im just going to keep it ita been good to me any advice..thx
@ostromadventures4 ай бұрын
The only thing I’ve noticed is the more I pull with it the better it runs. This is my first diesel so I don’t have a ton of experience. Glad it’s been a good truck for you 👍
@Codyrhodes8004 ай бұрын
I want the bell the smokestack and the whole engine
@vman992mah25 ай бұрын
Having similar issue. What did u replace my brother. Relay or fanm.mine fans running full speed with running on gauge fluctuations like you're one. Please assist
@ostromadventures5 ай бұрын
Mine was the fan itself; relies were good. Good luck 👍
@brianh11615 ай бұрын
Dumb question - what for bed cover do you have on that and do you like it? Thanks
@ostromadventures4 ай бұрын
The bed cover brand - Gator -truck bed accessories. It’s been a good cover for me and the price was really good.
@brianh11614 ай бұрын
@@ostromadventures Thanks, curious to find one that's not leaky.
@ostromadventures4 ай бұрын
@@brianh1161 I’ve have driven in a rain storm that caused alittle leaking in the corner. And I believe if you go through a car wash same thing the corner will have very little water. Other than that no leaking.
@brianh11614 ай бұрын
@@ostromadventures Yeah seems like anything covering a bed like that is gonna leak somewhere a little. Thanks for the info I will take a look at these. You've had it several years I take it?
@ostromadventures4 ай бұрын
@@brianh1161 yea over 4 years now. Holding up really good.
@wakymilo6 ай бұрын
Do you have a video on how to reroute the cable to come out the side?
@lilp33n776 ай бұрын
Did ya rattle can the Rubicon clone bumper at home or have a shop do it? Looks great btw.
@ostromadventures6 ай бұрын
Took it to shop to have it powder coated. Thanks!
@schnooka00786 ай бұрын
Don't ever show me this again you sir are horrible at life. Burp it at the thermostat?!?!? Wow
@nickandymtg84836 ай бұрын
Can you move the camera?
@ostromadventures6 ай бұрын
No just the drone it’s move; camera lens is in fixed position. While not flying you can manually adjust the lens to point out more or to ground.
@nickandymtg84836 ай бұрын
@@ostromadventures ok thank you this was very helpful. Two more questions, what are the buttons with the arrows next to the joysticks do, and how do make it hover in place so it doesn’t drift? Edit: sorry for so much questions but on more, on the right joy stick if you press on it it clicks what does that do?
@ransompendragon6237 ай бұрын
So, does the heater core get flushed out when they do a radiator flush? Or is it something they have to do specifically?
@ostromadventures7 ай бұрын
I believe you would need to ask for full system flush if you want the radiator and heater core done. Otherwise most places would just do radiator.
@caseyterry80357 ай бұрын
I appreciate your video. I like how you routed the wire out the side of the control box so I copied it. looks way better and won't be rubbing on the paint. Thanks.
@ostromadventures7 ай бұрын
Thank you!
@wakymilo6 ай бұрын
Do you by chance have a video or write up on how to reroute the cable?
@ostromadventures6 ай бұрын
@@wakymilo sorry I don’t have the instructions for the winch. It tells you how to do it as an option in the winch instructions.
@caseyterry80355 ай бұрын
@@wakymilo I just drilled a hole where this guy did on the side of the control cover so that it isn't going out the back and rubbing the grill. I didn't make a video. I routed the cables the same as in this video
@elelectrotech93749 ай бұрын
if you turn your heater on and your jeep cools down u have a bad thermostat
@silverbulletJKU10 ай бұрын
It appears this was your solution since no follow up video was made? Battling the same issue for he second time but first time was solved with a handful of fixes since it was also suffering from cooling issues to it was tough to identify the initial solution on mine.
@ostromadventures10 ай бұрын
Yes luckily it solved my problem. Before this I change thermostat, bled the system a few times, flashed the heater core a few times. Can be very frustrating. Good luck 👍
@terrymeyer708410 ай бұрын
Own a 16 xdc sv with 74k miles. Drove it off the lot new and never had a single issue. Pull 18ft enclosed trailer daily. Wish Cummins and Nissan would get back together.
@terrymeyer708410 ай бұрын
Bone stock I should have stated.
@jasonjohnson371310 ай бұрын
Ty
@0159ralph10 ай бұрын
I almost brought one in 2019 with 5.0 Cummings, but went with the 4th gen Ran 1500. I think the 5.0 Cummings would have been a great combo with the 8 speed zf transmission, in the ram as an option. However the boneheads at Stellantis went with that POS Italian 3.0 Fiat diesel and gave the ram a little bit of a bad rap.
@469union10 ай бұрын
Just purchased a 2019 Titan XD Cummins. Which motor oil do you recommend?
@CallsignJubilee9 ай бұрын
Shell rotella t6 is what I’d use. Very good stuff
@muherdfan9911 ай бұрын
I went there today and it was so fun
@daveh32911 ай бұрын
A review with the engine running ..... didn't hear a word of that part.
@Mike2500able Жыл бұрын
Nice truck, I have a 2016 SL all stock with the Cummins that I’m the first owner of. Love the truck and has been trouble free, keep up the maintenance and filters. I don’t think folks who get into these newer diesels understand that these truck aren’t meant to be run around town trucks getting groceries and so on…. Due the the emissions mine has always been a highway truck towing or not.. keep its legs stretched and exhaust hot with the highway RPMs high and you will have no issues. Keep them wheels moving and take care.
@ostromadventures8 ай бұрын
Thanks! I agree, with the emissions it would be difficult to just drive around town it would go into regen a lot. The more it tows the better it runs.
@timothydavis60787 ай бұрын
@@ostromadventuresis the Titan still holding up well, and giving you good service.
@ostromadventures7 ай бұрын
@@timothydavis6078 luckily it’s still doing great. I tow and haul a lot in the summer; in the winter I don’t drive as much.
@TITANXD907 Жыл бұрын
How much payload do you have on that SV
@ostromadventures Жыл бұрын
I believe the payload is 2420 max.
@user-ej9sq1hv3g Жыл бұрын
Its good 😊😮😊
@MassGainingGuy Жыл бұрын
Then gets bounced in the 1st round of the tournament.
Пікірлер
Any ideas on why it overheating only on highway never in town has new thermostat I already pressure tested it all good there if I slow down on the highway to 60 it goes down I'm baffled by it
@@LloydMcKinley-e3o I’m not sure mine was totally opposite of that. Do you have winch or mud build up that could be blocking the radiator? Good luck in finding the issue.
I have the exact same model 2014 JK. Love it!
@@jwlee9791 ✌️such awesome vehicles! Thanks for the comment
Do you know how much it weighs? This is awesome!
@@gilmerod8635 I haven’t taken it to the scale yet but I’m estimating around 700 lbs. tongue weight is alittle to lite, will add spare tire to front to help weight it down. Right now I can lift very easy by hand.
Nice little camper. Good job, excellent budget.
@@sdnlawrence5640 thank you!
What’s the lift size?
@@clevelandwalker1336 3.5”
Had a 2012 Wrangler and it had very few repairs, just minor stuff. It had 200,000 miles on it. Just purchased a 2024 and as I drove It home the engine light came on. 😳 Brought it back and they said it had needed a computer update. Picked it up and as soon as I got on the freeway the engine light came on again.😡 Brought it back and waited 3 weeks for new O2 sensors. I've had it back for a few days now and all seems well. Just hope it stays that way!
@@glendawilliams4035 wow 200k. Sorry to hear about the issues with your 2024. Hopefully your new one goes the 200,000 miles also. 👍 Thanks for your comment! ✌️
Northern Indiana (Laporte) as well. Where did you source the windows and door?
@@7996hobguy I tried to find him on Facebook marketplace again but couldn’t find the ad. If I come across it again I’ll send it to you. Lucky in our area there are a lot of options with the rv manufacturers close to us in Elkhart. I was at an rv surplus store in Orland Indiana last week and they had some good doors and windows. It’s called Newsoms rv surplus. Facebook marketplace is great at finding parts. Good luck in your search and have fun
Nice dude! I'm torn on using foam like you did or just using plywood. I have the same trailer too.
@@F-N-C thanks! Below is a link to one that I made with 2x2 and plywood.. that trailer was more of duty so I wasn’t worried about weight as much. Either way both turned out good and I had a lot of fun building them. Enjoy your build!
kzread.info/dash/bejne/h4CDyKOhibCYaNo.htmlsi=R70keyzqOJWZj8Z1
@@ostromadventures Sweet, thanks!
Do you think 2x2s would work instead of the 4x4s?
@@richarde6911 yea 2X2 construction works fine On another trailer build that’s what I used. Below is the link - kzread.info/dash/bejne/h4CDyKOhibCYaNo.htmlsi=lH5Dmd_C3BWTYJUc
Im in indiana also. What was the name of the place u got the doors and windows from?
@@jeremym3948 it’s a guy off of Facebook marketplace. I’ll try to find his name and forward it to you. It in Michigan about 30min north east of Michigan City, IN.
Looks pretty good, where did you get the tires from? And did you have to upgrade to a longer axle to fit? I have seen alot of people saying they had to upgrade the axle to fit larger tires for better clearance
@@juliansolomon855 I purchased the tires and wheels as a package off of Amazon. I did not upgrade the axle, just got 3/4” wheel spacers. Thanks!
I'd get some bearing buddies and feel for heat on longer hauls. Nicely done
@@Nomaswearefull thanks I’ll check into that. Appreciate it.
Very little road noise with a nice A/T tread.
I purchased on simpletire.com
Did you install a fairlead backing plate? Curious; i have the same bumper
@@napcop no just the winch plate that came with the bumper.
When we were there it was $8 per person to do the alpine slide. So much fun!
Nice job, looks great!
Thank you!
Pretty cool. I'm really curious about the foam panels. Are those just your regular foam panels that would be used for insulation? I can't believe they're strong enough for something like this.
Thanks, I am surprised how strong it is with the foam but it is super strong. I’ve taken it through ditches and driving on highway at 75 and there has been no flex or movement. I did use more 2x4s for support then most that make these.
Site correction- G07 Second site here was fine but not as nice as first time.
Where did you get the pvc trim?
Menards, it’s in section with outdoor siding trim. It worked really good it’s just alittle expensive.
I know you made this video a year ago. Have you had any more issues with overheating?
No but we are coming into summer, last summer it was good. Hoping it is the same this year, if any issues come up I’ll reply back to the message. Thanks!
@@ostromadventures so this weekend I’m going to be changing out the thermostat for a 180° thermostat.. and if this doesn’t fix the problem, I will probably go with a temperature sensor and a new radiator. Probably a three core instead of the OEM.
@@ostromadventures my problem only happens when I’m at highway speeds when I slow down or stop it doesn’t overheat
Home Depot no longer does the rebate as of 2024! 😢
So I take it they are worth it
Yea so far they are working out great and definitely worth it for price.
Looks good
Thank you!
Awesome getting mine done asap thank you
Hope it goes good; mine still look good going on two years. There is only one that I will probably have to redo maybe next year.
Was there any alignment issues pulling the entire hinge off?
Same question about installing the hinges back on. I tried adjusting the driver’s side rear door when I put the nylon sleeves in the hinges and had issues getting the door to fit properly after. Any tips? My lowers are rusted and bug me on my silver Jeep
Should be complete in another week. Look for more videos of build with expense breakout and building process.
Jellystone Park the Camp Resort is Opening of Summer until May 24. 😮
That stinks.
@@ostromadventures oh no!
This makes me have goosebumps 💀💀💀
www.gogginschallenge.com
I have a 2017 xd Diesel 26,000 miles almost traded it for a Ram im just going to keep it ita been good to me any advice..thx
The only thing I’ve noticed is the more I pull with it the better it runs. This is my first diesel so I don’t have a ton of experience. Glad it’s been a good truck for you 👍
I want the bell the smokestack and the whole engine
Having similar issue. What did u replace my brother. Relay or fanm.mine fans running full speed with running on gauge fluctuations like you're one. Please assist
Mine was the fan itself; relies were good. Good luck 👍
Dumb question - what for bed cover do you have on that and do you like it? Thanks
The bed cover brand - Gator -truck bed accessories. It’s been a good cover for me and the price was really good.
@@ostromadventures Thanks, curious to find one that's not leaky.
@@brianh1161 I’ve have driven in a rain storm that caused alittle leaking in the corner. And I believe if you go through a car wash same thing the corner will have very little water. Other than that no leaking.
@@ostromadventures Yeah seems like anything covering a bed like that is gonna leak somewhere a little. Thanks for the info I will take a look at these. You've had it several years I take it?
@@brianh1161 yea over 4 years now. Holding up really good.
Do you have a video on how to reroute the cable to come out the side?
Did ya rattle can the Rubicon clone bumper at home or have a shop do it? Looks great btw.
Took it to shop to have it powder coated. Thanks!
Don't ever show me this again you sir are horrible at life. Burp it at the thermostat?!?!? Wow
Can you move the camera?
No just the drone it’s move; camera lens is in fixed position. While not flying you can manually adjust the lens to point out more or to ground.
@@ostromadventures ok thank you this was very helpful. Two more questions, what are the buttons with the arrows next to the joysticks do, and how do make it hover in place so it doesn’t drift? Edit: sorry for so much questions but on more, on the right joy stick if you press on it it clicks what does that do?
So, does the heater core get flushed out when they do a radiator flush? Or is it something they have to do specifically?
I believe you would need to ask for full system flush if you want the radiator and heater core done. Otherwise most places would just do radiator.
I appreciate your video. I like how you routed the wire out the side of the control box so I copied it. looks way better and won't be rubbing on the paint. Thanks.
Thank you!
Do you by chance have a video or write up on how to reroute the cable?
@@wakymilo sorry I don’t have the instructions for the winch. It tells you how to do it as an option in the winch instructions.
@@wakymilo I just drilled a hole where this guy did on the side of the control cover so that it isn't going out the back and rubbing the grill. I didn't make a video. I routed the cables the same as in this video
if you turn your heater on and your jeep cools down u have a bad thermostat
It appears this was your solution since no follow up video was made? Battling the same issue for he second time but first time was solved with a handful of fixes since it was also suffering from cooling issues to it was tough to identify the initial solution on mine.
Yes luckily it solved my problem. Before this I change thermostat, bled the system a few times, flashed the heater core a few times. Can be very frustrating. Good luck 👍
Own a 16 xdc sv with 74k miles. Drove it off the lot new and never had a single issue. Pull 18ft enclosed trailer daily. Wish Cummins and Nissan would get back together.
Bone stock I should have stated.
Ty
I almost brought one in 2019 with 5.0 Cummings, but went with the 4th gen Ran 1500. I think the 5.0 Cummings would have been a great combo with the 8 speed zf transmission, in the ram as an option. However the boneheads at Stellantis went with that POS Italian 3.0 Fiat diesel and gave the ram a little bit of a bad rap.
Just purchased a 2019 Titan XD Cummins. Which motor oil do you recommend?
Shell rotella t6 is what I’d use. Very good stuff
I went there today and it was so fun
A review with the engine running ..... didn't hear a word of that part.
Nice truck, I have a 2016 SL all stock with the Cummins that I’m the first owner of. Love the truck and has been trouble free, keep up the maintenance and filters. I don’t think folks who get into these newer diesels understand that these truck aren’t meant to be run around town trucks getting groceries and so on…. Due the the emissions mine has always been a highway truck towing or not.. keep its legs stretched and exhaust hot with the highway RPMs high and you will have no issues. Keep them wheels moving and take care.
Thanks! I agree, with the emissions it would be difficult to just drive around town it would go into regen a lot. The more it tows the better it runs.
@@ostromadventuresis the Titan still holding up well, and giving you good service.
@@timothydavis6078 luckily it’s still doing great. I tow and haul a lot in the summer; in the winter I don’t drive as much.
How much payload do you have on that SV
I believe the payload is 2420 max.
Its good 😊😮😊
Then gets bounced in the 1st round of the tournament.