yes, at the time of the video, the big carpintis hybrid was the pond boss
@FEboats6 сағат бұрын
Assuming it was a delta force that went under? Having trouble deciding what hull to get for p mono. Leaning towards sd4 after talking to Jerry but it’s so ugly. Used to run an insane fe34.
@alexrex202 сағат бұрын
no it was a Seaducer that went under. my Pursuit does really well. it's not the fastest but it's incredibly stable and smashes through waves and wakes
@FEboats14 минут бұрын
@@alexrex20 oh ouch!
@FEboats3 күн бұрын
I like the videos where the boats are shown coming in. Nice to see them up close. Wish I was out there in Texas. Well maybe not now when it’s probably 90 degrees!
@alexrex203 күн бұрын
i keep forgetting to do a pit walk video. i'll try to do one next race to show all the boats. i'm more than happy to show hardware and under the hatch of my boats, and maybe other racers will allow it also
@FEboats3 күн бұрын
@@alexrex20 that’s awesome thanks man.
@feverexplosion19684 күн бұрын
mine doesnot work for some reason
@FEboats8 күн бұрын
Considering the raider had the sd3 13-15 years ago. It ran good but just doesn’t look so hot. Neither does the raider for that matter.
@tabmurry8 күн бұрын
Lot of good info! What brand hull is trash can?
@alexrex208 күн бұрын
@@tabmurry it's Aeromarine
@tabmurry8 күн бұрын
@@alexrex20 that's what I figured out of production 😪
@ModifiedRC08779 күн бұрын
2 more laps and you prolly could’ve got him. Boat is running fast and stable bud!
@FEboats10 күн бұрын
That mean machine is moving on the straights. What motors are the other guys running?
@alexrex2010 күн бұрын
@@FEboats i believe they're both on stock Leopards
@H2oMechanic2RC11 күн бұрын
Have you ever got one of these motors wet? I had the cooling nipple pop off, flood the boat & and the motor got wet. I oiled the bearings and kept a fan on my boat for 5 days. Next trip out it seemed under powered. 2100kv 3890can
@tonyp226313 күн бұрын
Where is it ??
@alexrex2012 күн бұрын
@@tonyp2263 Katy Texas
@FEboats13 күн бұрын
Water looks great.
@chicoramirez846415 күн бұрын
🔥🔥🔥
@ModifiedRC0877Ай бұрын
Thanks for sharing. Tell me more about your esc wiring. I noticed you’re running extra cap packs. I have an X8s but I’m seeing too much Ripple than I’d like. Almost double from compared to my xlxs2.
@alexrex20Ай бұрын
it can never hurt to add a cap pack to an ESC but i've never needed to add one on an X8S. but i only run 4S on my X8S ESCs. i normally see around 1.0-1.2V of ripple on the X8S. on the MMX6S and Cobra8, they do need an external cap pack in my opinion.
@FEboatsАй бұрын
What’s the boat on the bench, it looks great. And awesome racing! I love it!
@alexrex20Ай бұрын
that's my T mono. it's a 47in MHZ Caiman 2.0
@FEboatsАй бұрын
@@alexrex20 oh man that thing looks perfect. Is it on your channel? I’d like a bigger boat for the chop here where the gas boats run. Wanting to stay under 50 inches myself. I know t mono is max 60 inch.
@alexrex20Ай бұрын
@@FEboats kzread.info/dash/bejne/l6mlxJp_YqrQZZM.html it's the white one.
Any chance you have an extra water block that you would be willing to sell. I have a brand new Monster X 6s, the 1st esc you talked about. Do you happen to know what ESC equivalent is in the Traxxas boats?
@alexrex202 ай бұрын
the Traxxas would be equivalent to the Mamba Monster 2. no i do not have any extra water blocks.
@FEboats3 ай бұрын
Awesome! What’s your setup?
@alexrex203 ай бұрын
mine is the blue one with black hatch. Aeromarine Mean Machine with a Cobra 8 ESC and OSE/Tenshock Evo2240-Limited 2650kv
@FEboats3 ай бұрын
Oh nice, my last p limited was also a mean machine but with ul-1 motor and esc. What was that 13-15 years ago or something lol. That tenshock motor looks fast. I have a couple of the old ones.
@Ricknrobin4203 ай бұрын
Very nice video we need people to explain and share information in this hobby thank you sir
@zeeek13 ай бұрын
what did you do to the Castlwe 1515?
@alexrex203 ай бұрын
it has the solder tabs removed and the wires are soldered directly to the windings and pointed out the back, to allow the use of a rear support ring.
@boatwerks3 ай бұрын
Just found your channel and subscribed
@zeeek13 ай бұрын
This is hy I built the larger Pearl for lsh class
@zeeek13 ай бұрын
Castle XL2 escs are nice too...
@zeeek13 ай бұрын
your cap packs are helping cooling too. Mamba Monster X has data logging
@RogallaMarineRC3 ай бұрын
Thanks for the lesson, brofessor
@towerman753 ай бұрын
I've never seen Bass boats go that fast.
@jakashh3 ай бұрын
Can you drive that boat full speed into my ass?
@RogallaMarineRC3 ай бұрын
Turn fin alignment looks off.
@sarita55723 ай бұрын
That looks fun
@IRONCLADRC3 ай бұрын
Great heat! That front stretch was rough. BG4L
@RogallaMarineRC3 ай бұрын
Not too shabby big guy. Open her up a bit more next time!
@RogallaMarineRC4 ай бұрын
Nice
@RogallaMarineRC4 ай бұрын
Cool
@RogallaMarineRC4 ай бұрын
Cheetah looks different
@alexrex204 ай бұрын
maybe it's Lil Squirt
@RogallaMarineRC4 ай бұрын
Sweeeeet
@fc11334 ай бұрын
Thanks.
@azri-za4 ай бұрын
I need this...
@TheThetruthmaster1Ай бұрын
I'm going to put one on my kids mjx and I'll put on on My wltoy 144010. Those short wheelbase cars would be amazing at cornering if tey wernt just so hard to control!
@vincerock885 ай бұрын
What size tank is that?
@alexrex205 ай бұрын
220gal
@RogallaMarineRC6 ай бұрын
First
@scarfacezalusky82386 ай бұрын
*promosm*
@proraptor41466 ай бұрын
I wish I lived there, Id buy a boat so fast
@proraptor41466 ай бұрын
That was so awesome
@garrettkifer83327 ай бұрын
Any damage? Did you do any reinforcements before running? Curious how tough those Ricos are
@alexrex207 ай бұрын
no damage yet other than some small gelcoat cracks underneath. this hull is full CF inlay on bottom half and the stringers run up under the deck and support the deck. very stiff hull. i can kill any boat though ;)
@RED89P138 ай бұрын
That was a sick steal at the end
@jtmann20028 ай бұрын
That looks like a lot of fun!
@rhiandconnor32878 ай бұрын
Come on Wayne
@CozyRC8 ай бұрын
Awesome footage! It seems you are standing on a house balcony while racing? 👍😎
@alexrex208 ай бұрын
we're standing on a deck on top of the boat house
@ChucKsor-dm4eq9 ай бұрын
Sin chào anh hay quá cũng chia sẻ với video này nhé cũng chia sẻ với mọi người đều biết nhẹ 👍🥰🥰🥰🥰🥰🥰🥰👏
Пікірлер
Assuming big (Texas cichlid?) is the boss?
yes, at the time of the video, the big carpintis hybrid was the pond boss
Assuming it was a delta force that went under? Having trouble deciding what hull to get for p mono. Leaning towards sd4 after talking to Jerry but it’s so ugly. Used to run an insane fe34.
no it was a Seaducer that went under. my Pursuit does really well. it's not the fastest but it's incredibly stable and smashes through waves and wakes
@@alexrex20 oh ouch!
I like the videos where the boats are shown coming in. Nice to see them up close. Wish I was out there in Texas. Well maybe not now when it’s probably 90 degrees!
i keep forgetting to do a pit walk video. i'll try to do one next race to show all the boats. i'm more than happy to show hardware and under the hatch of my boats, and maybe other racers will allow it also
@@alexrex20 that’s awesome thanks man.
mine doesnot work for some reason
Considering the raider had the sd3 13-15 years ago. It ran good but just doesn’t look so hot. Neither does the raider for that matter.
Lot of good info! What brand hull is trash can?
@@tabmurry it's Aeromarine
@@alexrex20 that's what I figured out of production 😪
2 more laps and you prolly could’ve got him. Boat is running fast and stable bud!
That mean machine is moving on the straights. What motors are the other guys running?
@@FEboats i believe they're both on stock Leopards
Have you ever got one of these motors wet? I had the cooling nipple pop off, flood the boat & and the motor got wet. I oiled the bearings and kept a fan on my boat for 5 days. Next trip out it seemed under powered. 2100kv 3890can
Where is it ??
@@tonyp2263 Katy Texas
Water looks great.
🔥🔥🔥
Thanks for sharing. Tell me more about your esc wiring. I noticed you’re running extra cap packs. I have an X8s but I’m seeing too much Ripple than I’d like. Almost double from compared to my xlxs2.
it can never hurt to add a cap pack to an ESC but i've never needed to add one on an X8S. but i only run 4S on my X8S ESCs. i normally see around 1.0-1.2V of ripple on the X8S. on the MMX6S and Cobra8, they do need an external cap pack in my opinion.
What’s the boat on the bench, it looks great. And awesome racing! I love it!
that's my T mono. it's a 47in MHZ Caiman 2.0
@@alexrex20 oh man that thing looks perfect. Is it on your channel? I’d like a bigger boat for the chop here where the gas boats run. Wanting to stay under 50 inches myself. I know t mono is max 60 inch.
@@FEboats kzread.info/dash/bejne/l6mlxJp_YqrQZZM.html it's the white one.
@@FEboats kzread.info/dash/bejne/eWunqdxypNzfdbA.html
Can I still get one?
Great video👍
Does it help make sharper turns as well
Smooth I guess I'd say
A little more work
Any chance you have an extra water block that you would be willing to sell. I have a brand new Monster X 6s, the 1st esc you talked about. Do you happen to know what ESC equivalent is in the Traxxas boats?
the Traxxas would be equivalent to the Mamba Monster 2. no i do not have any extra water blocks.
Awesome! What’s your setup?
mine is the blue one with black hatch. Aeromarine Mean Machine with a Cobra 8 ESC and OSE/Tenshock Evo2240-Limited 2650kv
Oh nice, my last p limited was also a mean machine but with ul-1 motor and esc. What was that 13-15 years ago or something lol. That tenshock motor looks fast. I have a couple of the old ones.
Very nice video we need people to explain and share information in this hobby thank you sir
what did you do to the Castlwe 1515?
it has the solder tabs removed and the wires are soldered directly to the windings and pointed out the back, to allow the use of a rear support ring.
Just found your channel and subscribed
This is hy I built the larger Pearl for lsh class
Castle XL2 escs are nice too...
your cap packs are helping cooling too. Mamba Monster X has data logging
Thanks for the lesson, brofessor
I've never seen Bass boats go that fast.
Can you drive that boat full speed into my ass?
Turn fin alignment looks off.
That looks fun
Great heat! That front stretch was rough. BG4L
Not too shabby big guy. Open her up a bit more next time!
Nice
Cool
Cheetah looks different
maybe it's Lil Squirt
Sweeeeet
Thanks.
I need this...
I'm going to put one on my kids mjx and I'll put on on My wltoy 144010. Those short wheelbase cars would be amazing at cornering if tey wernt just so hard to control!
What size tank is that?
220gal
First
*promosm*
I wish I lived there, Id buy a boat so fast
That was so awesome
Any damage? Did you do any reinforcements before running? Curious how tough those Ricos are
no damage yet other than some small gelcoat cracks underneath. this hull is full CF inlay on bottom half and the stringers run up under the deck and support the deck. very stiff hull. i can kill any boat though ;)
That was a sick steal at the end
That looks like a lot of fun!
Come on Wayne
Awesome footage! It seems you are standing on a house balcony while racing? 👍😎
we're standing on a deck on top of the boat house
Sin chào anh hay quá cũng chia sẻ với video này nhé cũng chia sẻ với mọi người đều biết nhẹ 👍🥰🥰🥰🥰🥰🥰🥰👏