Jr's Gasoline Alley is a place for automotive related content where I share my experiences for fun or education.
BE ADVISED: Due to elements of interpretation and limitations by not being present to observe, Jr's Gasoline Alley / Jeeprenegadeguy and affiliates are not responsible or liable for any loss or damage caused by your reliance on or understanding of the presented information contained in these videos. Always source specific information for your vehicle or project and remember to use proper safety personal protective equipment as recommended in your vehicles repair manual. Car repair can be dangerous. It's your responsibility to seek advice from labels on tools, lifting equipment, and products to pursue repairs in the safest way possible.
FTC Disclaimer: I earn a % of sales made through Amazon Affiliate links. Watch for them in the description to find tools etc. used in the videos. We both win!
Пікірлер
Im new to RC and I’m trying build my senton can I add these King Shocks ? 100mm or should I go with the 90mm
Thanks for the quick repair looking forward to doing it on my crossfire was concerned about tapping on the center bearing but looks simple enough
I recommend using different hardware. The bolt heads they send doesn’t allow the filter to slide far enough up to get a decent grip and will fall off when driving. Ask me how I know. 😢😂
What you torque to
What about the light you get in the dashboard after you get done with the brakes you didn't say anything about that you have to get it reprogram or the brake system is not going to work right.
hows the ride feel
Great, just the way it should!
What do you do about the check air filter message you get afterwards each time you crank it? I can't seem to find a way to make it reset and go off.
hi sir..why my e90 320d 2011 m-sport doesn't have Bump stop when i removed my Rear Absorber it seems like my metal Cap directly attached on black plastic cover not on Bump stop?
Because yours is a M, this is a regular e90. Yours has a metal housing and no bushings. M BMWs have better parts than the regulars. So to put it simply, the car he changed the absorber on is a different model to yours.
How to remove the plastic cover that has the roof rail of the Jeep Renegade without breaking the clips it has so that it is clear and put the racks?
What is the gas tank size?
if it's the crew cab long bed form, it has a giant 48 gallon tank. Most have 34 gallon tank, which isn't shabby.
Can we take a second to appreciate the fuel prices.
Thanks for the vid!
How are people getting 22 28 mpg? Im getting 15 to 16
I thought rolls or flips negated the accuracy of speed test due to false readings from velocity if the Crash, Certified speed runs have to be clean runs no wrecks
Two things: 1. This isn't certified and who cares about that. 2. Velocity of a crash is going to confuse a gps reading? A crash does not change the position of an object relative to a satellite.
Thanks for the help brother. Another small victory in life!
2 sided led still have that dark spot vs stock halogen, you might want to try 360 degree led bulbs.
Having trouble getting it to latch in place. The rounded edge of the end of the cover is hitting the bed rail by about a cm. What am I missing?
Great job! Excellent video ❤
So did your jeep get fixed after all?
👍🏾
I've see info to not use more than 17% alcohol, and use distilled water.
Does no one else hear the Indian sounding guy trolling through out the video!? Play the video from 10:35 and listen. lol shit had me rolling.
One thing I've always been told by a mechanics which is one reason your truck could be higher as you should not tighten up any of your suspension parts until the truck is back on the ground if you don't put the truck on the ground first all your bushings will wear prematurely
this is why I tightened up the control arms at ride height.
So nothing about the switch cover removal on the drivers side front seat? That’s where I’m stuck. 14:30 it is definitely not “all the same”.
What is different about it?
@@JrsGasolineAlleythe wiring harness is in a completely different spot and the electric controls on the side add a rough element to the removal. Also there are two trim pieces that you have to be careful with when removing the seat from the truck.
So what 4wd. I thought it was All wheel drive
So what 4wd. I thought it was All wheel drive
If this happens to anyone that still hasn’t figured it out try opening the side fuse box on passenger side and try dusting it off and cleaning it it worked for me after trying literally everything
87 fuel? Thought they needed 91
What is the torque specification for these plugs?
The 22 2.7 Silverado will smoke you has way more torque
Um yeah, I sure would hope the newer more powerful truck would be faster than the older less powerful truck.
How do i separate the top and bottom jump seat like you did that’s the only part im having trouble with thanks
How about a long term review? Still work?
They still work, and I still really like them
It’ helpful!Great job! man!
Glad I could help.
I just bought a 2016 Jeep Patriot & I really like it. No complaints yet but not looking for one. I also have a Ford escape & low maintenance
The reason you were getting traction roll is because there was no oil in them. Lower viscosity (higher number) oil means the body will be slower to roll keeping the CG more centered on the chassis for longer. Higher viscosity will lead to body roll as the fluid travels through the pistons faster and more of your CG will get to the outside tires faster leading to a roll over. Much of the rollover tendencies actually isnt in the shocks as shocks just absorb impacts but instead is in the tuning of the sway bar. Thicker sway bars will transfer forces and distribute it through both wheels. I must also include tha GPM parts suck, especially their springs as they will start to sag dramatically in less than a month.
First time changing it, everything went smoothly, thanks
There is absolutely no need to put a wrench on the new oil filter
What is the correct torque specification for the spark plugs on this engine?
Denso says 17 Nm. From my experience this is a normal torque spec for most modern alu engines. For example Ford 2.3 Ecoboost is 12 Nm. They are all realy low torque.
Dude clean your truck, get a rain x vac! Just kidding! 😂 Good video!
My truck is dirty? Lol, hardly.
do you need a tune to see power or throttle response results after installing this intake?
That's a jeep brother
Do you know of any alternative hoods that fit the mad van??
How did you lift up the rain gutter?
Great video. I want to tackle my truck with this film. 2024 silverado 2500. Thx for the clear information.
We just bought one did not think i was gping to like it when i first looked at one but trst drove it and me and the wife like it fits three kids in the back fun little suv
You do not need a scanner to put the brake system in service mode. Turn your key to the on position (do not start the truck) step on the brake, hold in the parking brake button for approx. 15 seconds, you will see the brake service light on the left side of the instrument panel, let off the brake pedal and push the emergency brake button 1 more time then you are in service mode.do the steps in reverse to remove service mode.
kzread.info/dash/bejne/ZmWEvLpxdLSxl9I.html
Will this work on my 2022 1500 limited ?
That is not working on my 2020 at4 sierra. What do I need to do?
Where is the part about resetting the oil light? You just showed how to check the level, nothing about the light
Will any OBD2 scanner work to put brake in service position or do I need a specific kind of scanner? Thanks for any help.
You don’t need a scanner they have videos on doing it from inside your truck. I just did mine and replaced my brake pads
Is there an app you can use to put the brakes in service mode?
In fwd versions, is the rear suspension Mcpherson or torsional axle?
So basically what you’re saying, your car dealership ripped you off twice and maybe this time they didn’t rip you off completely.
Well considering it was completed under warranty and each time with a loner, I don't think they ripped me off at all.
@@JrsGasolineAlleyfair enough!