Пікірлер

• 
  @Sidecharacter1912Сағат бұрын

  does this work with an slt2 radio

• 
  @Newbie-u5i15 сағат бұрын

  Just bought Eflite Apprentice STS 1.5m. The manual QR code sent me to this video. This is not the plane I purchased. This has a wing consisting of one unit. My model has left and right wing which must be connected This is not an RTF. Too much assembly needed. Was looking for an item that you can remove from box and fly. Saw one video which had one in use. Wasn’t Eflite

• 
  @seanmcglinn394121 сағат бұрын

  But the larger prop required in the float kit does not fit the drive shaft of the carbon cub. Can you send me the part number for a large prop that does fit??

• 
  @pwrofgrayskullКүн бұрын

  This is still my favorite crawler after all this time. Hands down. Love it. The looks and scale details are fantastic. Performance is amazing. If the price was a bit lower and it had selectable lockers, it would be the unbeatable total package - I’d probably own two or three more of them. 🤣 👍✌️

• 
  @JerryPlaysTheBlues2 күн бұрын

  …I kzread.info/dash/bejne/fIV6k9qQm7WdeJs.htmlsi=8wjnKHsHKMEpD9UI Flys like my original… great beginner

• 
  @milknutcheerio40603 күн бұрын

  if you don't have a bind plug use any tool to touch the two outer pins on row that says bind and just touch the pins, i used a pair of needle nose pliers so that they are connected and turn on the car and it should bind without needed a plug

• 
  @REPORODGE4 күн бұрын

  Forgot to mention about 1000 bucks or 2 months work in the uk!

• 
  @user-kw8fl1sr6e4 күн бұрын

  hello me and my buddy recently got a rbx10 ryft from spektrum with a firma 130 but it dosn't seen to be picking up the brakeing could anyone give us some advise

• 
  @ironj1005 күн бұрын

  What fan to get for the Gorgon

• 
  @rawadharfouche55457 күн бұрын

  Hello 4s batt is capable with this boat ?

• 
  @AaronChristensen9 күн бұрын

  Thank you so much. These controllers always confuse me but your video was perfect.

• 
  @user-ex2bo6ub4g9 күн бұрын

  I bought this crawler and the battery is already bad 3rd day

• 
  @touchscreenhiro10 күн бұрын

  I love my TLR Tuned Typon, however does anyone why at 100% throttle trim the car’s throttle will get stuck open? Happens everytime I try to do a pull down the road and I can’t stop, scares the crap out of me hahaha

• 
  @davidmatney503311 күн бұрын

  This is a great no-nonsense install video!

• 
  @Boogie_the_cat11 күн бұрын

  Nice vid. I'm doing this once my parts arrive in the mail. It's nice to see a big company happy to help with mods unlike, say, Traxxas, who want you to run their vehicles in one specific way: the way they tell you to run.

• 
  @arrow3711 күн бұрын

  can I bind a horizon hrz00014 transmitter to an axial AE-6 esc?

• 
  @user-gw2ms7kx1n11 күн бұрын

  Can you update IX 12 used radio I meant being a second owner

• 
  @SkyPathProductions14 күн бұрын

  This literally doesn’t explain the levels at all. It shows the number and a random airplane flying. Not helpful whatsoever. It would be great to explain the specific differences between them.

• 
  @SteveKeeler16 күн бұрын

  you didnt select a switch. please explain

• 
  @Markair1216 күн бұрын

  is there any cheaper controller that you would recommend

• 
  @muhammadsteinberg17 күн бұрын

  Dominate hand only! Your inferior hand could cause problems! 🤔

• 
  @tonetonego481118 күн бұрын

  Can I bind the mini LMT to DX6 transmitter?

• 
  @ChiefRickyRC18 күн бұрын

  How do I turn this ridiculous fast steering rate down?

• 
  @readeracingRC19 күн бұрын

  Nope does not updates. Waste of $30. And buying spectrum equipment

• 
  @shanestanton771823 күн бұрын

  Are you able to do this with a Traxxas speed control

• 
  @BloveMoneybagspmr23 күн бұрын

  I’m not seeing any red light flashing.🤦🏽‍♂️

• 
  @patrickjones545823 күн бұрын

  What are the channel assignments? I have AETR good to go ... Trying to get AS3x and Safe setup correctly ... I am using a non-spektrum transmitter as I dropped my DX6 and it is now just a paperweight. Any assistance is greatly appreciated

• 
  @kerbynho167324 күн бұрын

  I was going through it until I come across your video , it was very helpful thanks .

• 
  @isaicalderon537125 күн бұрын

  Thank you!!!!

• 
  @nwarcraceway767825 күн бұрын

  BIND PLUG GOES INTO THE SERVO PIGTAIL NOT WHERE THE FAN PLUGS IN THIS IS INCORRECT!! PLEASE REVIEW THESE INSTRUCTIONS

• 
  @p0pka_enota26 күн бұрын

  When assembling the tail, I cannot screw it to the fuselage. The screws are not long enough to reach to the tail's part. it doesn't even touch it. And I have no gaps, everything is snug and tight

• 
  @JoelSmiley27 күн бұрын

  when connecting the wing wires to the ports in the fuselage, where do those ports go to? do they just have wires going out of them and into the receiver? why I ask this is because I want to change out the receiver sometime soon.

• 
  @NeighberhoodRC27 күн бұрын

  What’s the set screw size for the motor pinion ???

• 
  @mike735727 күн бұрын

  Why doesn't the steering in position 1 and 2 match the icon showing on the transmitter? They appear opposite to the icon for 4WS.

• 
  @aidenkahn433828 күн бұрын

  Guys my mini aeroscout I just got the motor won't work. Could I get sent a new one I'm just a kid I don't have money please. I don't know why engine won't work

• 
  @erdemir564129 күн бұрын

  Lol this is hilarious, what a nutcase

• 
  @carlholden9811Ай бұрын

  This video saved me! Have two groms and one remote started controlling them both! Sorted now 👍🏽👍🏽

• 
  @bradleyfletcher5562Ай бұрын

  dont have same screws on my 6s wtf

• 
  @officialcarzilla6849Ай бұрын

  Is this the same steps with heavier shock oil

• 
  @arturosanvicenteАй бұрын

  Very useful. I was going to by a new one.

• 
  @user-vb3dg3pb6sАй бұрын

  Basically you have just told everyone what we already know, what an motor kv for speed runs, motor shaft size , information on servo , information on battery packs and mah rating, pinion gear tooth information for speed runs. Everything you said is in the box, worst video review i have ever seen

• 
  @aaronhouser3711Ай бұрын

  I have the same question about the body in your video. does it mount on the TLR?

• 
  @econarailАй бұрын

  I tried this procedure and this did not work, the Losi manual says disconnect steering servo and plug bind plug into the steering pigtail. I was able to then Bind it to an SLT transmitter and a SLT3. I've tried this Bind procedure on 4 of my other LMT and it does not work, you have use steering servo pigtail with the Bind plug.

• 
  @readeracingRCАй бұрын

  who do i call to fix this

• 
  @NekoDavidАй бұрын

  I'm new to the hobby ang I really like these quick videos. Love my Arrma Gorgon, but it's been a bit of an abusive relationship lol

• 
  @WewedogieАй бұрын

  Excellent overview of the building process.

• 
  @ChrisDaish-xw8xyАй бұрын

  why, when I set the flaps as you have described, the elevator goes the opposite way to waht it should to prevent balooning. The elevator % have to be at +3% and Positive 5% to work in the correct direction?

• 
  @deltaspartan9316Ай бұрын

  What happens when my light is red? On the charger? Have you had this problem?

• 
  @josephcaruana9165Ай бұрын

  Kindly I have a DX5C and a DX5 Pro and I purchased five SR6100AT and three SRS6110AT receivers to use on my cars but I couldn't use the AVC with the SR6100AT because the cars starts to wobbly so I have to switch off the AVC. I also purchased a DX5 Pro and still have the same issue with the same receivers. I tried the SRS6110AT, and they work fine with both radio transmitters . Finally, I can use the AVC, but I have to change all my SR6100AT receivers at a cost, which are not cheap! Does anyone else have the same issue?

• 
  @933pilgrimАй бұрын

  Cheap Eflite company - same Trojan, same pilot, same cheap paint, same electronics (except something "smart") - but triple price up!