so i’m trying to simply make a copper pad that is in a custom shape of an svg logo i have. it will be a capacitive touch pad. how can i make this ?
@SidneyCritic4 күн бұрын
It's best to try the FZ forum because I've quit, but from memory you can take elements out of other part dwgs and make parts, be it that it's quite difficult to make parts, hence these tutorials. There is a faster latter series if you look at my video list.
@eross214 күн бұрын
so if i wanted to make just a copper pad , could i just pick a stock part, export and import into inkscape. delete parts i dont need and load in my svg design in the xml editor ?
@Hassan669k27 күн бұрын
Bro thank you seriously!
@SidneyCritic26 күн бұрын
I did a new series that is better - kzread.info/dash/bejne/Z2ufzbOdmrrMerA.htmlsi=ZULtco7SYiqzVtox Plus a tips and tricks that might still be applicable - kzread.info/dash/bejne/qpyApdiIpMStmrw.htmlsi=Y6hDdh46LB-jDn2l
@rubensan40Ай бұрын
5:19 full sequential mode? injection too?
@X7rocksАй бұрын
Having a tricky time with this on a single cylinder project. Any input?
@TheMajdi86Ай бұрын
Hello, what software do i need to edit rusefi firmware?
@skyoreece9805Ай бұрын
Watched a few of your videos, honestly your very clever
@skyoreece9805Ай бұрын
Omg this is awesome never seen anyone do this ❤
@PilotcheatsАй бұрын
if the compiling doesnt work, try installing serialui 2.2.0 instead of the latest, it worked for me at least.
@AJDraws2 ай бұрын
DOOF WARRIOR
@acurarl99293 ай бұрын
Dang really needed a visual with this. Idk why your talking like your pointing something out to us when your not
@acurarl99293 ай бұрын
What’s this
@JerryWillis-ub9lb3 ай бұрын
Yes! Make more videos like that.
@siobhanfeeley46793 ай бұрын
I wish I could see you someday
@alex-gk1sp4 ай бұрын
Thanks 🙏🙏🙏
@royyono35114 ай бұрын
Apakah itu program untuk simulasi ckp dan cmp
@siobhanfeeley46794 ай бұрын
Omg this is absolutely beautiful, I wish my husband was alive to see this my perfect apple
@siobhanfeeley46794 ай бұрын
Miss the old days seeing Iota with my husband who has passed.. he was as obsessed as me
@siobhanfeeley46794 ай бұрын
Ohh wow what a blast ..
@SidneyCritic4 ай бұрын
If you're from SYD I put a link to a blog about iOTA gigs in the description above, ie, it might bring back some memories.
@andraevickers4415 ай бұрын
I have a speeduino spark v1.1 and am having problems to get the hall effect sensor to read on my tuner. Can get your plz.
@arbutuswatcher5 ай бұрын
I've got two Samsung Galaxy S9's (SM-G960U), with 3-party software on them, that I've been unable to remove. Even when I perform the factory reset without a password, via Recovery Mode menu, the 3-party software can't be deleted. "Samsung Galaxy S9 Factory Reset without a password: Press and hold down the volume up button, the Bixby key and the Power key at the same time. The device will automatically switch on and enter the Recovery Mode menu. Use the volume down button to select the 'wipe data/factory reset' option." The phones are in really good shape, with decent batteries, & no cracks in the screens, however I've been unable to get any of the local cell shops to even look at them. If I can't get around this problem, they may be headed for the bin. Any suggestions? Is rooting the next option, or am I better off looking for a couple of refurbished S9 or S10 online?
@SidneyCritic5 ай бұрын
The truth is, if you go to a Pro shop to unlock these phones it will cost more than the phone is worth, ie, working S9 2nd hand is $100 max while a Pro shop FRP unlock is $100, so you HAVE to DIY unlock it yourself or you're better off buying a working 2nd hand phone. I was looking at rooting, but I kind-of lost interest as my S9 was only a $20, plus I have a working S8+, plus I switched to a Pixel 3XL because it has a better cam than the S8+. If you can't root them, and the displays are good, they are worth a bit of $s just for the display. The problem is that no one in 1st world countries wants to buy the phone just for the display - lol -. Basically shops and the home DIYer don't buy them because it's cheaper/less trouble to buy good working 2nd hand.
@33dew5 ай бұрын
Hey I just reset two s9 phones with the same problem Would you like to know how? Or did you bin the phone?
@SidneyCritic5 ай бұрын
Yeah sure, still have the S9.
@33dew5 ай бұрын
Run the SamFw tool Reflash with latest firmware for the s9 Run the 2024 frp unlock in the SamFW tool (latest version) This will fail but you will now see the option of emergency dialer on the let's go screen Then just use the dialer screen to open the test screen and run the 2022 frp unlock I found this by fluke and it works a treat
@curvebush50596 ай бұрын
Truth has been told
@capnthepeafarmer6 ай бұрын
Do you have all this information on a website? I'd love to look at this information in more depth.
@capnthepeafarmer6 ай бұрын
So much information in such a short video! I love it!
@kickinon6 ай бұрын
Hey, how would you go about it if its not producing cold air anymore? Throw it in the bin or Is it possible to re-gas it somehow?
@SidneyCritic6 ай бұрын
I don't know if it's common for these units to leak, but both of mine still work, ie, have gas. As far as I know all refrigeration stuff can be re-gassed, but if you don't find the leak it will just leak again. Also re-gas is a bit pricey. I would download the manual above and see if you can find warning LED or a better setting - I usually pick cold mode, and keep pressing the down button to the lowest temp. PS: electrically, maybe the compressor relay in the control unit has failed.
@-UmarKhan6 ай бұрын
Hi Crackind video, My issue is without a load it extends fully however when load is apllied on moves about 2 inches. Any ideas? Thanks
@SidneyCritic6 ай бұрын
If it's leaking oil I think it has run out of oil, ie, pumping air. If it has oil you can try opening the filler on the pump to relief the air pressure. Other than that maybe it's back flowing, ie, the valve.
@josemalopez46496 ай бұрын
VIDEO IS NOT SHOWN WHY ???
@vg23air6 ай бұрын
so i get wasted spark, go ahead and fire a plug when it is not in the power stroke, but if you use only a crank sensor, how does it fire the injector without wasted injector and using twice as much fuel, does it use wasted injector until it starts then the speeduino sees the SPEED UP of the actual powerstroke then GUESS thats the right phase and use that for the rest of the time the engine runs ?
@carlosgarciaoropeza54806 ай бұрын
Hello brother. Although late, I wish you a happy new year 2024. Watch the video LFC#302, adaman IT, (32:13). I saw your comment with Sorin. Young Graham explains it brilliantly (saved to my favorites). I let you work. A hug from Mexico.
@nb971857 ай бұрын
mate where did you find those fusible resistors? i have a similar problem and one of the resistors is open and i suspect the power ic too. power ic i can get off aliexpress but i cant find fusible resistors in that resistance anywhere
@SidneyCritic7 ай бұрын
I think I was wrong about fuse resistors, I think they are just wire wound resistors, ie they blow open like a fuse - lol -. I think I just got resistors with a white jacket, and I remember I could only get bigger ones, ie, prob higher watt rated.
@ShahabSheikhzadeh8 ай бұрын
This may not be a success, but you show some interesting troubleshooting steps, and you show folks the basics of that Board Viewer tool, which is pretty neat and helpful! :0)
@tutorialeskelvin95288 ай бұрын
amigo mi placa la falla que presenta es que se queda en el logo del fabricante. y no pasa de alli me gustaria que subieras una solucion.
@rubensan408 ай бұрын
Thank mr
@SS_Tuning8 ай бұрын
this is a very helpful video, thanks!
@byronkeane78679 ай бұрын
Every song feels like a 90’s classic yet I haven’t heard iota for years, used to watch him live in early 2000s. What an incredible artist.
@vladdyvansavage87609 ай бұрын
Rediscovering iOTA again. Brilliant!
@geraldh.80479 ай бұрын
Got the very same motherboard. After transplanting it from an old case into a new case it would not start anymore just like yours even though nothing had changed. It had standby voltage from the PSU but refused to turn on. Double checked everything, switched to a different PSU, nothing changed. Then I noticed that my CMOS battery was below 2V. Took the battery out while I was searching for a replacement, put in the replacement battery and board is working again. Not sure if this is what happened to your board since 2.7V is a lot more that my battery had (I think it was @1.7V) - but the low voltage in mine led to a state where the board just would not turn on just like yours. So maybe the mystery fix was that you somehow did a CMOS reset by shortly unplugging the battery which reset the weird state it was in?
@william-1319 ай бұрын
The video isn't working anymore. It shows a still of a carb drawing the whole video. Sound is ok
@MX-ch6nu9 ай бұрын
Very well explained. this helps me a lot. thanks.
@1allan29 ай бұрын
I decided to rip out the electronics. I installed a mechanical fridge thermostat and a three speed fan switch and wola ! Used silicone to stop all the annoying rattles and some ac laging for exposed piping. Nice little unit now 😁
@daviddejesus92059 ай бұрын
Hi , thank you for the content it is very rare but also highly detailed. Would you be able to explain why rotaries above 600 hp start to have failure on the side seal . Is their really any solution to this on a 2 rotor?
@1allan29 ай бұрын
Nice video. Im near tempted to remove the electronics and use switches and a simple fridge thermostat. Back to basics, the compressor has its own temp overload......
@brunodinis745411 ай бұрын
I just wanted to increase the distance between 2 pads, I've been watching these tutorials but I'm even more confused, dick stuck in toaster.
@gabrijel111811 ай бұрын
could you please tell me which program you use for the diagrams
@niko186011 ай бұрын
Saw and partied with these guys in Byron Bay Australia... absolute legends
@Kernoe Жыл бұрын
mine is shortly starting and then shutting down and starting and so on. Found the hot part. It is a mosfet IC down at the chipset with my board. RT8065ZQW. It is small. Right next to the 2nd red pcie at the end before the big inductor.
@SidneyCritic Жыл бұрын
It could be shorted, but I think it can also be something down the line shorted and it's over-working that IC trying to supply power, ie, it depends on how hot it's getting. Either way,that's not going to be easy to change, because it's close to a lot of plastic melting stuff, ie, you'll have to protect the plastic parts from hot-air with strips of alum coke can.
@Kernoe Жыл бұрын
@@SidneyCritic It is getting extremely hot right away, much more than the inductor next to it and the chipset unit. The cap under it went hot as well. Removed it. Same error. Thanks for your thoughts, definitely making some coke can protection for the exchange.
@Roman007443 ай бұрын
@@Kernoe got the same problem did you fix yours?
@Kernoe3 ай бұрын
@@Roman00744 nope. i got the same board for a few bugs. My next try would have been though to just heat the very small mosfet with the gun close to the chipset if there was a contact problem. Probably that would not fix it.
@Kernoe Жыл бұрын
This is the best motherboard diagnose video i found so far. Thanks a lot!
@scythascytha2849 Жыл бұрын
Very helpful. Thank you so much
@danbenson2445 Жыл бұрын
Memories of Sydney in the late 90s. I remember watching him as a solo acoustic act at the Vulcan. Surrounded by candles. Very atmospheric. Thanks for uploading.
Пікірлер
so i’m trying to simply make a copper pad that is in a custom shape of an svg logo i have. it will be a capacitive touch pad. how can i make this ?
It's best to try the FZ forum because I've quit, but from memory you can take elements out of other part dwgs and make parts, be it that it's quite difficult to make parts, hence these tutorials. There is a faster latter series if you look at my video list.
so if i wanted to make just a copper pad , could i just pick a stock part, export and import into inkscape. delete parts i dont need and load in my svg design in the xml editor ?
Bro thank you seriously!
I did a new series that is better - kzread.info/dash/bejne/Z2ufzbOdmrrMerA.htmlsi=ZULtco7SYiqzVtox Plus a tips and tricks that might still be applicable - kzread.info/dash/bejne/qpyApdiIpMStmrw.htmlsi=Y6hDdh46LB-jDn2l
5:19 full sequential mode? injection too?
Having a tricky time with this on a single cylinder project. Any input?
Hello, what software do i need to edit rusefi firmware?
Watched a few of your videos, honestly your very clever
Omg this is awesome never seen anyone do this ❤
if the compiling doesnt work, try installing serialui 2.2.0 instead of the latest, it worked for me at least.
DOOF WARRIOR
Dang really needed a visual with this. Idk why your talking like your pointing something out to us when your not
What’s this
Yes! Make more videos like that.
I wish I could see you someday
Thanks 🙏🙏🙏
Apakah itu program untuk simulasi ckp dan cmp
Omg this is absolutely beautiful, I wish my husband was alive to see this my perfect apple
Miss the old days seeing Iota with my husband who has passed.. he was as obsessed as me
Ohh wow what a blast ..
If you're from SYD I put a link to a blog about iOTA gigs in the description above, ie, it might bring back some memories.
I have a speeduino spark v1.1 and am having problems to get the hall effect sensor to read on my tuner. Can get your plz.
I've got two Samsung Galaxy S9's (SM-G960U), with 3-party software on them, that I've been unable to remove. Even when I perform the factory reset without a password, via Recovery Mode menu, the 3-party software can't be deleted. "Samsung Galaxy S9 Factory Reset without a password: Press and hold down the volume up button, the Bixby key and the Power key at the same time. The device will automatically switch on and enter the Recovery Mode menu. Use the volume down button to select the 'wipe data/factory reset' option." The phones are in really good shape, with decent batteries, & no cracks in the screens, however I've been unable to get any of the local cell shops to even look at them. If I can't get around this problem, they may be headed for the bin. Any suggestions? Is rooting the next option, or am I better off looking for a couple of refurbished S9 or S10 online?
The truth is, if you go to a Pro shop to unlock these phones it will cost more than the phone is worth, ie, working S9 2nd hand is $100 max while a Pro shop FRP unlock is $100, so you HAVE to DIY unlock it yourself or you're better off buying a working 2nd hand phone. I was looking at rooting, but I kind-of lost interest as my S9 was only a $20, plus I have a working S8+, plus I switched to a Pixel 3XL because it has a better cam than the S8+. If you can't root them, and the displays are good, they are worth a bit of $s just for the display. The problem is that no one in 1st world countries wants to buy the phone just for the display - lol -. Basically shops and the home DIYer don't buy them because it's cheaper/less trouble to buy good working 2nd hand.
Hey I just reset two s9 phones with the same problem Would you like to know how? Or did you bin the phone?
Yeah sure, still have the S9.
Run the SamFw tool Reflash with latest firmware for the s9 Run the 2024 frp unlock in the SamFW tool (latest version) This will fail but you will now see the option of emergency dialer on the let's go screen Then just use the dialer screen to open the test screen and run the 2022 frp unlock I found this by fluke and it works a treat
Truth has been told
Do you have all this information on a website? I'd love to look at this information in more depth.
So much information in such a short video! I love it!
Hey, how would you go about it if its not producing cold air anymore? Throw it in the bin or Is it possible to re-gas it somehow?
I don't know if it's common for these units to leak, but both of mine still work, ie, have gas. As far as I know all refrigeration stuff can be re-gassed, but if you don't find the leak it will just leak again. Also re-gas is a bit pricey. I would download the manual above and see if you can find warning LED or a better setting - I usually pick cold mode, and keep pressing the down button to the lowest temp. PS: electrically, maybe the compressor relay in the control unit has failed.
Hi Crackind video, My issue is without a load it extends fully however when load is apllied on moves about 2 inches. Any ideas? Thanks
If it's leaking oil I think it has run out of oil, ie, pumping air. If it has oil you can try opening the filler on the pump to relief the air pressure. Other than that maybe it's back flowing, ie, the valve.
VIDEO IS NOT SHOWN WHY ???
so i get wasted spark, go ahead and fire a plug when it is not in the power stroke, but if you use only a crank sensor, how does it fire the injector without wasted injector and using twice as much fuel, does it use wasted injector until it starts then the speeduino sees the SPEED UP of the actual powerstroke then GUESS thats the right phase and use that for the rest of the time the engine runs ?
Hello brother. Although late, I wish you a happy new year 2024. Watch the video LFC#302, adaman IT, (32:13). I saw your comment with Sorin. Young Graham explains it brilliantly (saved to my favorites). I let you work. A hug from Mexico.
mate where did you find those fusible resistors? i have a similar problem and one of the resistors is open and i suspect the power ic too. power ic i can get off aliexpress but i cant find fusible resistors in that resistance anywhere
I think I was wrong about fuse resistors, I think they are just wire wound resistors, ie they blow open like a fuse - lol -. I think I just got resistors with a white jacket, and I remember I could only get bigger ones, ie, prob higher watt rated.
This may not be a success, but you show some interesting troubleshooting steps, and you show folks the basics of that Board Viewer tool, which is pretty neat and helpful! :0)
amigo mi placa la falla que presenta es que se queda en el logo del fabricante. y no pasa de alli me gustaria que subieras una solucion.
Thank mr
this is a very helpful video, thanks!
Every song feels like a 90’s classic yet I haven’t heard iota for years, used to watch him live in early 2000s. What an incredible artist.
Rediscovering iOTA again. Brilliant!
Got the very same motherboard. After transplanting it from an old case into a new case it would not start anymore just like yours even though nothing had changed. It had standby voltage from the PSU but refused to turn on. Double checked everything, switched to a different PSU, nothing changed. Then I noticed that my CMOS battery was below 2V. Took the battery out while I was searching for a replacement, put in the replacement battery and board is working again. Not sure if this is what happened to your board since 2.7V is a lot more that my battery had (I think it was @1.7V) - but the low voltage in mine led to a state where the board just would not turn on just like yours. So maybe the mystery fix was that you somehow did a CMOS reset by shortly unplugging the battery which reset the weird state it was in?
The video isn't working anymore. It shows a still of a carb drawing the whole video. Sound is ok
Very well explained. this helps me a lot. thanks.
I decided to rip out the electronics. I installed a mechanical fridge thermostat and a three speed fan switch and wola ! Used silicone to stop all the annoying rattles and some ac laging for exposed piping. Nice little unit now 😁
Hi , thank you for the content it is very rare but also highly detailed. Would you be able to explain why rotaries above 600 hp start to have failure on the side seal . Is their really any solution to this on a 2 rotor?
Nice video. Im near tempted to remove the electronics and use switches and a simple fridge thermostat. Back to basics, the compressor has its own temp overload......
I just wanted to increase the distance between 2 pads, I've been watching these tutorials but I'm even more confused, dick stuck in toaster.
could you please tell me which program you use for the diagrams
Saw and partied with these guys in Byron Bay Australia... absolute legends
mine is shortly starting and then shutting down and starting and so on. Found the hot part. It is a mosfet IC down at the chipset with my board. RT8065ZQW. It is small. Right next to the 2nd red pcie at the end before the big inductor.
It could be shorted, but I think it can also be something down the line shorted and it's over-working that IC trying to supply power, ie, it depends on how hot it's getting. Either way,that's not going to be easy to change, because it's close to a lot of plastic melting stuff, ie, you'll have to protect the plastic parts from hot-air with strips of alum coke can.
@@SidneyCritic It is getting extremely hot right away, much more than the inductor next to it and the chipset unit. The cap under it went hot as well. Removed it. Same error. Thanks for your thoughts, definitely making some coke can protection for the exchange.
@@Kernoe got the same problem did you fix yours?
@@Roman00744 nope. i got the same board for a few bugs. My next try would have been though to just heat the very small mosfet with the gun close to the chipset if there was a contact problem. Probably that would not fix it.
This is the best motherboard diagnose video i found so far. Thanks a lot!
Very helpful. Thank you so much
Memories of Sydney in the late 90s. I remember watching him as a solo acoustic act at the Vulcan. Surrounded by candles. Very atmospheric. Thanks for uploading.