Hello. May i feature your dashcam clips in my next compilation video ? linked and fully credited, Thank You !!
@RespecttheTrafficКүн бұрын
Try it yourself, hi Can I feature this video in my compilations? Credited ofc (on-screen and link back). Stay safe
@VasylGladunКүн бұрын
Yes, you can with credits
@TheByrd3 күн бұрын
This could've been a 1 minute video. Why is it 6 minutes people want to get in their card bro.
@VasylGladun3 күн бұрын
Why do you think you have the right to complain when you didn't even pay a cent to watch this video? Did I force you to watch it? No, I didn't. You don't like it, then go on keep looking for 1 minute video. Do you even have a slight idea what it takes to make such videos?
@neiltuttle82655 күн бұрын
hoiw do ;you get the bulg out of the one just beside it
@HELVIS.5 күн бұрын
You had the cutting blade on back to front fist time around.
@DashcamDriversUS.7 күн бұрын
Hey, can i use your, Dashcam video,
@Mrwinningfun7 күн бұрын
Hey, can i use your, Dashcam viideo, wiith credit. ?-,
@VasylGladun7 күн бұрын
Yes you can with credits
@wisewayss7 күн бұрын
Hey there, is it okay to feature your clip on our social networks? It will be credited in the description and with a watermark on the video
@VasylGladun7 күн бұрын
Yes you can with credits
@BlackSpaniard8 күн бұрын
This fan can also be removed from the bottom
@dccdrivingacademy8 күн бұрын
Hi, can I feature it? Credited of course!
@VasylGladun8 күн бұрын
Yes you can with credits
@dccdrivingacademy7 күн бұрын
@@VasylGladun Thank You buddy.
@supermikeb8 күн бұрын
I've been hit and run numerous times in San Francisco. The police say "it's a civil matter" and unless someone is critically injured or killed, completely ignore hit and runs. I don't fix my car anymore. I just send in the videos and keep the insurance checks. I almost have enough to buy a new car now. It's like the wild West here.
@GAS.M38 күн бұрын
😂😂 might as well 👌
@josephjoestar5158 күн бұрын
That’s crazy lmfao 🤣
@sujitbala14927 күн бұрын
yup that's cali alright
@KevMartin-rl1we8 күн бұрын
this is exactly the same problem i have; a broken plastic elbow. you mentioned the price was about $40 for the elbow, and was on back-order for 2 weeks, but do you know the part# for this elbow piece?
@driveinstructordrivingscho82338 күн бұрын
Hello Try it yourself,,,can I use this clip in my compilation? Any comment what happened? Thanks
@DashcamLessons9 күн бұрын
Hi, can I feature it? Credited of course! And is there any update? Was everyone alright?
@VasylGladun8 күн бұрын
Yes you can with credits. Sorry no updates, I was just passing through the area
@DashcamLessons8 күн бұрын
@@VasylGladun Thank you!
@RRBDDrivingSchool9 күн бұрын
hi there
@RRBDDrivingSchool9 күн бұрын
Hi Try it yourself , can I use this video "Tesla hit and run on I-10 near exit 43 California 6/14/24 " in my compilation of dashcam clips?with credit (name on screen).Any comment?update?
@VasylGladun9 күн бұрын
Yes, you can with credit
@RRBDDrivingSchool8 күн бұрын
@@VasylGladun thank you
@matthewfewings60239 күн бұрын
Same issue with my drivers door. Followed your instructions will up date. 👍
@anthonyweiand739 күн бұрын
No clip/ spring replacement?! Half-ass work if you ask me. Replace all or non
@arceo1810 күн бұрын
What Da Fluck with da Filter ?????
@ARTACELIS11 күн бұрын
Also, check your radiator cap. When I checked it, my cap was rusty, the spring was stiff, and I cracked the seal. I installed a new one, and the hoses are back to normal.
@7514alpa11 күн бұрын
Muchas gracias por el video si me funciono
@grovermoore407114 күн бұрын
This stuff and all the other brands don't work, save your money and just change the o2 sensors
@WangChung6915 күн бұрын
How much does it cost and where did you buy it. So basically it did not resolve your issue? I wonder since you have a large fuel tank, it might require 2 bottles, please provide a follow up report.😊
@user-hj4vz6sl9t16 күн бұрын
To get your emgine test light to reset, disconnect t ground cable (-) from t battery for 5-10 min. Reconnect afterwards and the CPU should be ready to reset itself 😊
@sagarmeena021016 күн бұрын
Thanks for sharing....i tried duralube and that didn't work either 😢
@jmdonasc18 күн бұрын
AT-205 worked for my 05 corolla. Saved me a $$$
@emersonaguirre954221 күн бұрын
You sir are a hero!
@unkledoobz966221 күн бұрын
Thank you, sir. Your video is gold Hope all is well. Have a great day.
@KayMacheen25 күн бұрын
I really appreciate the review over time, thank you for the update. 💖💖
@randysturgis963526 күн бұрын
Perfect, did not even have to disconnect the other running lights or power harness . Thanks !!
@VasylGladun24 күн бұрын
No, you don't have to. The reason I did it because I had only one hand, other one was holding camera 😁
@davek937827 күн бұрын
I like your plastic cup idea.
@tapangasoul692828 күн бұрын
Do things actually stay frozen solid?
@GreyRockOneАй бұрын
Nice! A putty knife gets the big stuff and then I finish it off with a pressure washer.. Thanks!
@milkarusАй бұрын
Blame your air compressor, because there other video when that ratchet makes a great job jov removing bolts
@davidreynolds4684Ай бұрын
I'm going to assume you know we can't hear what you are saying due to the music playing. I've got a feeling your words could be a bit more helpful than the music to be honest. The video is pretty good so far but I'd suggest explaining how what when where and why if you do other videos. Not complaining just suggesting
@pauldavies9993Ай бұрын
Nice one did you just let it dry out or replace
@TehKingofBorneoАй бұрын
Fast, easy, and great tip. Thanks!!
@cciloguАй бұрын
What is the Ford part number for that new sensor you installed?
@VasylGladunАй бұрын
In description
@cciloguАй бұрын
Thank you, sir.
@travis1118Ай бұрын
So is it still working now? I'm about to buy the 80qt for $400
@VasylGladunАй бұрын
Yes. Still going.
@robertarvelo8265Ай бұрын
You talk too much get to the point
@98babyrere72Ай бұрын
My same 2 codes i changed the air temp sensor now i just need to fix cylinder head temp sensor car is in limp mode was told engine blow similar to you was in small accident got radiator and inner cooler replaced same codes as you same sounds
@HuggyBearHikesАй бұрын
Wow....mine works fine..2 bumps of the trigger and it breaks loose my lug nuts on my silverado 1500 truck. I upgraded all my compressor, hose, and impact fittings to High Flow fittings. Turn. My 13 gallon yard sale find compressor up to 115 max psi and this impact works fine
@Roan65Ай бұрын
brilliant video and many thanks
@RalphMeurdersАй бұрын
Thank you very much!!!
@mboyd3361Ай бұрын
Thank you. Helped program the lock. 👍
@RudyBeavis-wx6ojАй бұрын
This helped! May god bless you
@Redman147Ай бұрын
Thank you for the explanation. I'll be doing this today on mine.
@lukegunn7839Ай бұрын
This video saved my sanity, thank you! Worked great on my 2019 Transit. Why this isn't included in the manual is beyond me.
@DanVanLife2 ай бұрын
Do I need to unplug battery before messing with the light plugs or airbag sensor?
@VasylGladun2 ай бұрын
I didn't
@user-yu2gd5zn6g2 ай бұрын
thanks-u helped me a lot just by pointing to where the screws are on the blower and the vent shroud that goes around it. i bought my blower motor at AutoZone (1st mistake) and the squirrel cage was a fraction of an inch higher on the shaft of the blower motor assembly than the original blower as a result it scraped against the plastic throwing a fuse. After realizing this, I gently tapped the squirrel cage fan down until it matched the profile of the original fitting in the blower tube without issue. the fuse was under the removable shroud under the steering wheel. r-40 fuse for front blower. I replaced the blower resister unnecessarily thinking it was bad. Saw it was recommended to replace both somewhere. Miserable job to get the 1 screw off needed to buy a miniature socket type wrench for the hex bit to get into the tiny space above the screw with only a 1/2 inch above it contorting in unnatural positions to reach it- took like an hour, LOL - happy to have ac its 90 degrees out there - thanks for video!
Пікірлер
Hello. May i feature your dashcam clips in my next compilation video ? linked and fully credited, Thank You !!
Try it yourself, hi Can I feature this video in my compilations? Credited ofc (on-screen and link back). Stay safe
Yes, you can with credits
This could've been a 1 minute video. Why is it 6 minutes people want to get in their card bro.
Why do you think you have the right to complain when you didn't even pay a cent to watch this video? Did I force you to watch it? No, I didn't. You don't like it, then go on keep looking for 1 minute video. Do you even have a slight idea what it takes to make such videos?
hoiw do ;you get the bulg out of the one just beside it
You had the cutting blade on back to front fist time around.
Hey, can i use your, Dashcam video,
Hey, can i use your, Dashcam viideo, wiith credit. ?-,
Yes you can with credits
Hey there, is it okay to feature your clip on our social networks? It will be credited in the description and with a watermark on the video
Yes you can with credits
This fan can also be removed from the bottom
Hi, can I feature it? Credited of course!
Yes you can with credits
@@VasylGladun Thank You buddy.
I've been hit and run numerous times in San Francisco. The police say "it's a civil matter" and unless someone is critically injured or killed, completely ignore hit and runs. I don't fix my car anymore. I just send in the videos and keep the insurance checks. I almost have enough to buy a new car now. It's like the wild West here.
😂😂 might as well 👌
That’s crazy lmfao 🤣
yup that's cali alright
this is exactly the same problem i have; a broken plastic elbow. you mentioned the price was about $40 for the elbow, and was on back-order for 2 weeks, but do you know the part# for this elbow piece?
Hello Try it yourself,,,can I use this clip in my compilation? Any comment what happened? Thanks
Hi, can I feature it? Credited of course! And is there any update? Was everyone alright?
Yes you can with credits. Sorry no updates, I was just passing through the area
@@VasylGladun Thank you!
hi there
Hi Try it yourself , can I use this video "Tesla hit and run on I-10 near exit 43 California 6/14/24 " in my compilation of dashcam clips?with credit (name on screen).Any comment?update?
Yes, you can with credit
@@VasylGladun thank you
Same issue with my drivers door. Followed your instructions will up date. 👍
No clip/ spring replacement?! Half-ass work if you ask me. Replace all or non
What Da Fluck with da Filter ?????
Also, check your radiator cap. When I checked it, my cap was rusty, the spring was stiff, and I cracked the seal. I installed a new one, and the hoses are back to normal.
Muchas gracias por el video si me funciono
This stuff and all the other brands don't work, save your money and just change the o2 sensors
How much does it cost and where did you buy it. So basically it did not resolve your issue? I wonder since you have a large fuel tank, it might require 2 bottles, please provide a follow up report.😊
To get your emgine test light to reset, disconnect t ground cable (-) from t battery for 5-10 min. Reconnect afterwards and the CPU should be ready to reset itself 😊
Thanks for sharing....i tried duralube and that didn't work either 😢
AT-205 worked for my 05 corolla. Saved me a $$$
You sir are a hero!
Thank you, sir. Your video is gold Hope all is well. Have a great day.
I really appreciate the review over time, thank you for the update. 💖💖
Perfect, did not even have to disconnect the other running lights or power harness . Thanks !!
No, you don't have to. The reason I did it because I had only one hand, other one was holding camera 😁
I like your plastic cup idea.
Do things actually stay frozen solid?
Nice! A putty knife gets the big stuff and then I finish it off with a pressure washer.. Thanks!
Blame your air compressor, because there other video when that ratchet makes a great job jov removing bolts
I'm going to assume you know we can't hear what you are saying due to the music playing. I've got a feeling your words could be a bit more helpful than the music to be honest. The video is pretty good so far but I'd suggest explaining how what when where and why if you do other videos. Not complaining just suggesting
Nice one did you just let it dry out or replace
Fast, easy, and great tip. Thanks!!
What is the Ford part number for that new sensor you installed?
In description
Thank you, sir.
So is it still working now? I'm about to buy the 80qt for $400
Yes. Still going.
You talk too much get to the point
My same 2 codes i changed the air temp sensor now i just need to fix cylinder head temp sensor car is in limp mode was told engine blow similar to you was in small accident got radiator and inner cooler replaced same codes as you same sounds
Wow....mine works fine..2 bumps of the trigger and it breaks loose my lug nuts on my silverado 1500 truck. I upgraded all my compressor, hose, and impact fittings to High Flow fittings. Turn. My 13 gallon yard sale find compressor up to 115 max psi and this impact works fine
brilliant video and many thanks
Thank you very much!!!
Thank you. Helped program the lock. 👍
This helped! May god bless you
Thank you for the explanation. I'll be doing this today on mine.
This video saved my sanity, thank you! Worked great on my 2019 Transit. Why this isn't included in the manual is beyond me.
Do I need to unplug battery before messing with the light plugs or airbag sensor?
I didn't
thanks-u helped me a lot just by pointing to where the screws are on the blower and the vent shroud that goes around it. i bought my blower motor at AutoZone (1st mistake) and the squirrel cage was a fraction of an inch higher on the shaft of the blower motor assembly than the original blower as a result it scraped against the plastic throwing a fuse. After realizing this, I gently tapped the squirrel cage fan down until it matched the profile of the original fitting in the blower tube without issue. the fuse was under the removable shroud under the steering wheel. r-40 fuse for front blower. I replaced the blower resister unnecessarily thinking it was bad. Saw it was recommended to replace both somewhere. Miserable job to get the 1 screw off needed to buy a miniature socket type wrench for the hex bit to get into the tiny space above the screw with only a 1/2 inch above it contorting in unnatural positions to reach it- took like an hour, LOL - happy to have ac its 90 degrees out there - thanks for video!