I put a set of West Coast Saw 3 point felling dogs on mine and really like them! Also been eyeballing a Sugihara bar. Not sure I'd want to convert to a 3/8 pitch bar and chain, though.
@honcho71423 күн бұрын
Please stay away from wiring. Your a hack at best .
@IZeSeriousАй бұрын
I used a jack and jack stand. Can pretty much just reach the electrical connector but couldnt disconnect it was trying to push the clip on the side in and pull. Wish i knew someone with a lift, I'd imagine it would make things a bit easier😂
@dabondoranaldoАй бұрын
I never remove the braces and leave the top ring when cutting the door. These are strong, but wood is heavy.
@davebusch4397Ай бұрын
Do you still have your HQ 15 im looking at a new 2023 for a very good price 32,000 with all the things i hear which are all fixable do you feel its worth it?
@jjcpuppupАй бұрын
Now he can take off the chain catch hook and put on a roller one and all pimped out😂
@i8BBQ4LunchАй бұрын
Nice video. What make and model 3-point pallet forks do you have? Thank you.
@Derek-ld4kn2 ай бұрын
First of all Sir, thank you for this video, it's gon help me out a lot! As for a response on a couple things in the comments; If u buy these from "Mopar" direct from the dealer, have them simply take n note on each package which ones are which n as far as the mid-shaft for the fourwheel drive, just soapstone or sharpee a spot on each end n number it n take it off, easy peazy.
@jhonnelelegaspi71252 ай бұрын
Does mag hytec also comes with port for temperature sensor install?
@koalafan15762 ай бұрын
Nice video and project. I am thinking of doing this as well as putting an inverter below my back seat and running a 120v to my truck bed.
@dustinwalden70913 ай бұрын
We have a 3200 series that is supposed to lift 1200 lbs but only likes about 700 or so. Might look into this. We bought a 3K forklift but still use the Kubota for the majority of our lifting.
@danielpadgett28313 ай бұрын
Cahinsaws are ment to work not look pretty lol but each to there own
@easternfrontnh3 ай бұрын
AWESOME 😊
@Xrobberyx3 ай бұрын
What is that measuring tool ?
@davidneilson35084 ай бұрын
Probably the #1 wiring failure over time is butt connectors. To be fair this was a good job and the heat shrink will hold it all together nicely. 🌴👍👍😎🌴
@andystainbrook89074 ай бұрын
What aux fuel tank do you have?
@Strom385 ай бұрын
My measurements at 14 inches for my wood stove ❤
@TheWuky225 ай бұрын
The video should be renamed: How NOT to use a Solo Stove Ranger
@brentstwocents5 ай бұрын
You have gun tucked into the waist of your pants while you do arts and crafts with two small children around? WTF!
@tomyohe53265 ай бұрын
How many shims did you use in total? Thanks for the video and useful information.
@billyh92395 ай бұрын
You would’ve had a good video if you left a music out, it’s louder than you are
@NovaDexter5 ай бұрын
How was that a 16 min video...
@NovaDexter5 ай бұрын
Saw looks like its never been used....
@georgederocher82026 ай бұрын
After seeing so many sockets mounted on the side, after watched thus it occurred to me that there’s less chance of cargo banging into them where you mounted them . Side benefit , and yeah, easy to access . Planning this for my Colorado. Already have a battery box with various plugs, containing a 100ah LifePo4 battery , but I want an alternator 12v source while driving . I’ll probably set mine for ignition on, but might hook one up constant to charge a phone etc. while sitting
@tylervosters32346 ай бұрын
Cool video. What are the dimensions of your IBC totes?
@trumpwon82316 ай бұрын
Stop the music please.
@ImASurvivorNThriver6 ай бұрын
This was great! Thanks for sharing.
@amandadavis97266 ай бұрын
Do you leave all of your firewood uncovered? Just asking so that I can make a decision.
@Ti-DAWGS7 ай бұрын
I noticed the same thing...the dogs only touched the wood near the end of the video. I love the slow mow with chips flying, though. Looks almost as good as Ti-DAWGS...but...not quite.
@johnmichaels43307 ай бұрын
Dude, if you hadn't put the snow overlay at the front, i would have thought you were an NFL player hired to do a infomercial. That was funny once i realized what you were doing. Thanks for the content exacrly what i needed to know.
@shawnpullen95177 ай бұрын
Is there a major benefit to going up to the 3/8" chain???
@attackfalcon7 ай бұрын
It seems that a loosely stacked tote holds 25% less wood. Appreciate the information, thank you.
@tamarabelcher95737 ай бұрын
You can buy a heat deflector for it, that will help radiate the heat out.
@jeremyzimbicki99778 ай бұрын
Awesome 😎 Thanks man 👍
@todrw18 ай бұрын
Thank you for this video!
@Ti-DAWGS8 ай бұрын
Nice DAWGS
@bayareacalifornia5108 ай бұрын
love it
@BVDsGoneFishing8 ай бұрын
My thoughts: "I can't believe I spent 11k on a tent and a frame."
@lilmountainlady8 ай бұрын
That was really nice. Thank you for sharing. Now I know what I need to do. Have a great day!
@collinsimp95268 ай бұрын
And ram dealer told me it was $650 for this? Geez, what’s wrong with greed in the world.
@frankenstudio229 ай бұрын
Excellent Video! Super Helpful! Thank you! ~ Only negative... The music is annoying.
@stevengonyaw16179 ай бұрын
I converted my 261 to 3/8 bar and chain, now i run the same 20 inch bars and chains on my 362 , 400 and 261 m tronic. All interchangeable 😜
@user-le6tr3go5o6 ай бұрын
Where did u get the 3/8 sprocket to fit the 261
@MMOMurder5 күн бұрын
@@user-le6tr3go5opretty sure both stihl and oregon offer them.
@Northeast_Mainiac9 ай бұрын
Yeah I need to do this to my 2019 b2301
@woodnyardjunkie9 ай бұрын
Great video! It's funny hearing people say you can fit a facecord stacked in a 275 gallon tote. You just proved them wrong. You should do a thrown in video with 2 275 gallon totes and see if that holds a facecord.
@SilvioTroncoGervasoni-if4bj10 ай бұрын
026 del2001 non ti stanca mai
@itsatoolthing632310 ай бұрын
Not sure it a good wallet. Dose the cards come out or are they stuck inside for life?
@jasonfoster290910 ай бұрын
So, most all of the things you mentioned are a problem for me. Mine doesn't have that annoying light below the booth. Grateful for that. Some other things that are annoying. The sorry fart fan in the shower. I replaced that with a fantastic fan. The slideout kitchen. Sounds good but it only has cold water. So much weight for a cheap dometic cooktop. That will be removed. Camper is super front heavy. Add water to fix? Better weight distribution? The bed..not great. Hard to change sheets and the closets are not easy to get to. It's a small camper so, meh. The command station looks great but lights up the cabin at night with red light. I can cover that easily. Lots of things were broken when I bought it in February, dealer still hasn't repaired them and it is now September (blames Black Series, who knows). Not a 4 season camper. I knew that when I bought it but it. I need address that sometime. All that being said, it isn't a bad trailer. The absolute worse thing, however, is the heater location you mentioned. I'm tall, my feet hang off the bed. They stay toasty. Or should I say, charbroiled? And if the covers fall off the end of the bed, I hope they are fireproof. Anyway, glad to see someone else has an HQ15.
@lloyddrown891110 ай бұрын
Great video. It sure helped me.
@noxdout_cummins424710 ай бұрын
Amateur at best alright lol
@rodgerneeb30110 ай бұрын
The reason your loader seems tippy is a lack of ballast weight in back, as soon as you pick up a tote with your 3 point, that issue is resolved, now you can move 2 totes simultaneously.
Пікірлер
I put a set of West Coast Saw 3 point felling dogs on mine and really like them! Also been eyeballing a Sugihara bar. Not sure I'd want to convert to a 3/8 pitch bar and chain, though.
Please stay away from wiring. Your a hack at best .
I used a jack and jack stand. Can pretty much just reach the electrical connector but couldnt disconnect it was trying to push the clip on the side in and pull. Wish i knew someone with a lift, I'd imagine it would make things a bit easier😂
I never remove the braces and leave the top ring when cutting the door. These are strong, but wood is heavy.
Do you still have your HQ 15 im looking at a new 2023 for a very good price 32,000 with all the things i hear which are all fixable do you feel its worth it?
Now he can take off the chain catch hook and put on a roller one and all pimped out😂
Nice video. What make and model 3-point pallet forks do you have? Thank you.
First of all Sir, thank you for this video, it's gon help me out a lot! As for a response on a couple things in the comments; If u buy these from "Mopar" direct from the dealer, have them simply take n note on each package which ones are which n as far as the mid-shaft for the fourwheel drive, just soapstone or sharpee a spot on each end n number it n take it off, easy peazy.
Does mag hytec also comes with port for temperature sensor install?
Nice video and project. I am thinking of doing this as well as putting an inverter below my back seat and running a 120v to my truck bed.
We have a 3200 series that is supposed to lift 1200 lbs but only likes about 700 or so. Might look into this. We bought a 3K forklift but still use the Kubota for the majority of our lifting.
Cahinsaws are ment to work not look pretty lol but each to there own
AWESOME 😊
What is that measuring tool ?
Probably the #1 wiring failure over time is butt connectors. To be fair this was a good job and the heat shrink will hold it all together nicely. 🌴👍👍😎🌴
What aux fuel tank do you have?
My measurements at 14 inches for my wood stove ❤
The video should be renamed: How NOT to use a Solo Stove Ranger
You have gun tucked into the waist of your pants while you do arts and crafts with two small children around? WTF!
How many shims did you use in total? Thanks for the video and useful information.
You would’ve had a good video if you left a music out, it’s louder than you are
How was that a 16 min video...
Saw looks like its never been used....
After seeing so many sockets mounted on the side, after watched thus it occurred to me that there’s less chance of cargo banging into them where you mounted them . Side benefit , and yeah, easy to access . Planning this for my Colorado. Already have a battery box with various plugs, containing a 100ah LifePo4 battery , but I want an alternator 12v source while driving . I’ll probably set mine for ignition on, but might hook one up constant to charge a phone etc. while sitting
Cool video. What are the dimensions of your IBC totes?
Stop the music please.
This was great! Thanks for sharing.
Do you leave all of your firewood uncovered? Just asking so that I can make a decision.
I noticed the same thing...the dogs only touched the wood near the end of the video. I love the slow mow with chips flying, though. Looks almost as good as Ti-DAWGS...but...not quite.
Dude, if you hadn't put the snow overlay at the front, i would have thought you were an NFL player hired to do a infomercial. That was funny once i realized what you were doing. Thanks for the content exacrly what i needed to know.
Is there a major benefit to going up to the 3/8" chain???
It seems that a loosely stacked tote holds 25% less wood. Appreciate the information, thank you.
You can buy a heat deflector for it, that will help radiate the heat out.
Awesome 😎 Thanks man 👍
Thank you for this video!
Nice DAWGS
love it
My thoughts: "I can't believe I spent 11k on a tent and a frame."
That was really nice. Thank you for sharing. Now I know what I need to do. Have a great day!
And ram dealer told me it was $650 for this? Geez, what’s wrong with greed in the world.
Excellent Video! Super Helpful! Thank you! ~ Only negative... The music is annoying.
I converted my 261 to 3/8 bar and chain, now i run the same 20 inch bars and chains on my 362 , 400 and 261 m tronic. All interchangeable 😜
Where did u get the 3/8 sprocket to fit the 261
@@user-le6tr3go5opretty sure both stihl and oregon offer them.
Yeah I need to do this to my 2019 b2301
Great video! It's funny hearing people say you can fit a facecord stacked in a 275 gallon tote. You just proved them wrong. You should do a thrown in video with 2 275 gallon totes and see if that holds a facecord.
026 del2001 non ti stanca mai
Not sure it a good wallet. Dose the cards come out or are they stuck inside for life?
So, most all of the things you mentioned are a problem for me. Mine doesn't have that annoying light below the booth. Grateful for that. Some other things that are annoying. The sorry fart fan in the shower. I replaced that with a fantastic fan. The slideout kitchen. Sounds good but it only has cold water. So much weight for a cheap dometic cooktop. That will be removed. Camper is super front heavy. Add water to fix? Better weight distribution? The bed..not great. Hard to change sheets and the closets are not easy to get to. It's a small camper so, meh. The command station looks great but lights up the cabin at night with red light. I can cover that easily. Lots of things were broken when I bought it in February, dealer still hasn't repaired them and it is now September (blames Black Series, who knows). Not a 4 season camper. I knew that when I bought it but it. I need address that sometime. All that being said, it isn't a bad trailer. The absolute worse thing, however, is the heater location you mentioned. I'm tall, my feet hang off the bed. They stay toasty. Or should I say, charbroiled? And if the covers fall off the end of the bed, I hope they are fireproof. Anyway, glad to see someone else has an HQ15.
Great video. It sure helped me.
Amateur at best alright lol
The reason your loader seems tippy is a lack of ballast weight in back, as soon as you pick up a tote with your 3 point, that issue is resolved, now you can move 2 totes simultaneously.