Пікірлер

• 
  @BG-xh5rb13 сағат бұрын

  I have a tuned F350 6.7 that needs a new valve body. Question; can I use the free download version of Forscan to update the PCM with the new valve body strategy? Thx

• 
  @UhBuddy19769 күн бұрын

  What do I do if my 99 Ford F150 does not let me access the parameters reset after I replaced the instrument cluster?

• 
  @Rjj272110 күн бұрын

  I had a customer with a 2016 buick enclave have this code. Issue ended up being a battery with a dead cell.

• 
  @freddiepabon11 күн бұрын

  I want to learn a plug valve on a 2008 Dodge Nitro

• 
  @ryantcshopable19 күн бұрын

  Can the programming be done with an autel maxisys

• 
  @petruandreascondurachi371829 күн бұрын

  Thank you ❤ , in my case i replaced the TCM with another used one , i have to write ip now from what i can understand

• 
  @kythuatoto2597Ай бұрын

  RLUSV81CDFN002368. Santafe 2015 2.4 thank

• 
  @tommymach1301Ай бұрын

  Need some help!! Much appreciated so my car was sitting for about a year no battery engine being built fasforward to now I had pats issues finally figured it out and it started running crank no start issue but my key fab with a new battery inside as well as the car. The remote would not control the locking and unlocking of the car and the horn would beep and basically go into panic mode then timing it correctly by pressing the button it would shut off but had no control of locking/unlocking of doors. So today I brought the tpms scanner home I only have one key and stupid me selected reset parameters and then also had selected I believe clear key code thinking it would rectify my issue I was wrong I'm now having a crank no start . How do I go about recoding my only key I have in my possession again? My car is a 2004 mustang mach1 and the pats control is in the instrument cluster. When I saw this video I knew rite away I messed up .. thankyou for your post of this video. And i hope to hear from you thankyou for your time..

• 
  @TimSmith-ik2sfАй бұрын

  If i am replacing an air bag module on a 2020 express it would be the same procedure right?

• 
  @XxAnthonyvossxXАй бұрын

  So weird I’m here trying to figure out a 16 ram with this issue and the picture of the red ram you used is the dealer where I currently work at lol what are the odds

• 
  @anthonystone2557Ай бұрын

  I have an 06 dts. One of the guys that worked for me swapped the passenger headlight. He did it without pulling bumper and lossemed 3 bolts in fuse box under hood now I have no crank no communication

• 
  @robertl.grayjr.nremt-p994Ай бұрын

  What would I need besides this Consult 3+ R2R to program new remote fobs for remote start for. 2024 Frontier Pro4X? The factory kit comes with 2 new remote start fobs and a new hood latch. I have a SnapOn Zeus+ with the Nissan upgrade software (added Nissan and Chrysler OEM access but don’t know yet what all the Nissan access can do)

• 
  @akurasan2324 күн бұрын

  I too am curious as to what vehicles our snap on can do. Were you able to get this resolved?

• 
  @heavenleeprincess86Ай бұрын

  I have an 08 enclave with no crank no start no com amd gas gauge reads E but is full. When key in on position dash lights up perfect then when put to start all dash lights black out headlights go off and nothing until back in on position. Cannot figure it out have replaced starter, alternator, battery, and the engine was jacked up to replace motor mount. Checked all fuse box pins and fuses and relays have been checked and replaced, cleaned up and fixed wires to starter and back grounds.

• 
  @kennshotts5603Ай бұрын

  I have one my mechanic says only the Dealer can fix my car. Its a 2011 mkx i will have to junk it now.

• 
  @k.hinnant4378Ай бұрын

  What could be the problem to your car if it's not going over 30 miles per hour?

• 
  @QuavandaLewisАй бұрын

  My awd went out and now my cruise control doesn't work anymore so I need to bring it to Ford to get it fixed

• 
  @user-ym4jh1yh6cАй бұрын

  so where to buy from

• 
  @repairfreakАй бұрын

  Hello Sam, Why cant I find the Transmission Characterization module in Forscan for my 2010 F-150 with the 6R80 transmission? Its not listed as shown in your video. Thank you for any help you can provide.

• 
  @24-7Roadside.AssistanceАй бұрын

  Right to repair without having to get insurance and a locksmith license .

• 
  @24-7Roadside.AssistanceАй бұрын

  Right To Repair = F Manufacturer

• 
  @nickayivor84322 ай бұрын

  KNOWLEDGEABLE, TOOLHUTUSA THANK YOU VERY MUCH FOR SHARING YOUR KNOWLEDGE WITH US 👍 from Nick Ayivor from London England UK 🇬🇧 ⏰️ 22:40PM Good Evening

• 
  @keithrankins9632 ай бұрын

  Any follow up or link to replace the head light module? Thx

• 
  @gruvygraphics99842 ай бұрын

  damn NERS cost $300 are your SERIOUS? Might as well take it to the dealer

• 
  @Surf_killa2 ай бұрын

  Awesome quick tutorial, thank you

• 
  @BashiruAdams-wm2os2 ай бұрын

  Hi my friend good morning I'm watching from Ghana I have range Rover evoque 2017 I replace the TCM can you help me to program it

• 
  @user-hh5bj3tu4k2 ай бұрын

  Hi.sir.i install a new valve body in my nissan cube 2010.and .my car only moves very slow...do I need to reserve or re program the trans module.or ecm.thank you.

• 
  @Autodoc912 ай бұрын

  Thank you for the informative video I just started locksmith less than a year ago an SF Bay area and I already have my vsp I found it really important to have and without it you cannot do anything

• 
  @JoesAutoElectric2 ай бұрын

  I find it interesting how so many folks see this as a good thing. "Anything they deem" is a very dangerous statement which opens he door to say "EVERYTHING is security related"! Then you are forced to get a VSP, and NASTF can write their own check. It is absolutely a lot of smoke and mirrors. I will say it. This is going to stop ZERO car thefts. All it will do is force criminals to steal cars in a different way. They will increase violent crimes, for sure. Instead of the criminal making a key and driving off, they will now carjack you. Make no mistake, the ones stealing these vehicles are making a lot of money overseas. NASTF is not going to stop them, any more than gun laws stop criminals. So, good job to the folks thinking that the lives of a family are worth less than a POS car. I can't say what I really want to say here, so I will leave it at that. PS I have also realized that my initial thoughts were correct about people who do not work in our industry. The folks I speak to had no idea of any of this happening. A lot of them also said they would like to know how to OPT out of this with their new cars. Another funny thing was that the very fist thing said by most folks was the same. If a thief can't take the car from my driveway, what is stopping him from following me or my wife and taking it by force? Of course we all know that car jacking is not a new sport. However, when you force a criminal into having no other way to get what they want, well...you are now directly contributing to the crime. It really comes down to common sense and reading between the lines. I would not be listening much to those who have the most to gain but, instead to common sense. Before I make any more friends, I will respectfully bow out. Food for though folks.

• 
  @josecueva55642 ай бұрын

  So what was the fn fix bro ? Describe what was fixed

• 
  @ahmedjasim87022 ай бұрын

  Thanks...please would explain the procedure steps as i understand ... when replacing used cvt you have to write ip chara which labled on transmission ....when replacing used tcm you have to read ip chara from old tcm befor replacement and write it on new used tcm ...if replace blank tcm you have to program tcm online ...is that wright ? what if lable on tansmission is lost ?

• 
  @angelmoreno80002 ай бұрын

  Freaking awesome video!!! I am very interested in purchasing a scanner tool like the one you used in the video. Do you have a link for it??

• 
  @MrTAGJOB2 ай бұрын

  I'm trying to program the airbag module on a 2016 Chevy Express sdm. No success. Can you help its ambulance passenger side with no connection to seat

• 
  @albertatrucker3322 ай бұрын

  Just bought a laptop with whole bunch of softwares yesterday this will be my first job thanks for the video. It will save me a bunch of time writing the parameters

• 
  @ironcladpatriot58292 ай бұрын

  I'm selling my Autel KM100 because of all these new burdensome regulations.

• 
  @ironcladpatriot58292 ай бұрын

  Is it true that they will require a business license, insurance, and a locksmith license to perform immobilizer functions? If that's the case, my tool will be useless because I'm not willing to jump through all those hoops.

• 
  @Autodoc912 ай бұрын

  Yes $2 million insurance policy is required and the locksmith license and other things

• 
  @geraust432 ай бұрын

  what OBD2 cable are you using

• 
  @briankotze573 ай бұрын

  Thank you for sharing

• 
  @ITS-ME-EVERLY3 ай бұрын

  You should get checked out by a Doctor for COPD.

• 
  @yoblackdream3 ай бұрын

  we need to do this even when the same transmission got repaired ? or not? sorry the bad english, we from brazil :(

• 
  @toolhutusaakathecarflasher30193 ай бұрын

  If the solenoid are same then no

• 
  @DallasAutoDiag3 ай бұрын

  Keep up the good work Sam.

• 
  @BashiruAdams-wm2os3 ай бұрын

  Hi friend how are you I'm working on range Rover evoque 2017 which want to program transmission control module

• 
  @toolhutusaakathecarflasher30193 ай бұрын

  OK, The 2017 likely uses Pathfinder software

• 
  @JakeLocksmith3 ай бұрын

  I would like to just download for now, to be ready for a job. Does the subscription start immediately after purchase?

• 
  @toolhutusaakathecarflasher30193 ай бұрын

  Nissan starts as soon as you pay them. You can download prior to paying

• 
  @Quickwrench753 ай бұрын

  Would you not have to receive an update for this change to affect your tool? What about those who do not update there tools they currently have. They will still be able to do most models would they not? I have no idea how it works so I am asking.

• 
  @toolhutusaakathecarflasher30193 ай бұрын

  I am not sure how it's gonna work. I know some scan tools can have a forced update anytine it's online. So I guess if you are worried I would make sure it's not connected or updated. We all know this is a short term solution for a long term problem though

• 
  @nickayivor84323 ай бұрын

  👍 Helpful indeed ,enjoy your weekend PRODIGY TOOLHUTUSA SAM from Nick Ayivor from London England UK 🇬🇧 ⏰️ 00:07AM Good Night 😴 🥱

• 
  @detailedautodiagnostics3 ай бұрын

  Hopeful Topdon watches this and understands that the scan tool is pulling the VIN from a different module other than the PCM and it appears to be pulling the VIN from the used TCM 👍👍👍

• 
  @philh92383 ай бұрын

  I’ve noticed that before happens all the time especially on Chevy tahoes and express vans 2015 and later

• 
  @toolhutusaakathecarflasher30193 ай бұрын

  I had it do that in a Dodge ram the other day. Autel and top don did same thing. But PCM was no communication

• 
  @nickayivor84323 ай бұрын

  Very helpful information video 👍 ACCOMPLISHED ToolHutUSA From Nick Ayivor from London England UK 🇬🇧 ⏰️ 16:26 Good Afternoon

• 
  @jorgemat80803 ай бұрын

  So I'm going to need a locksmith to change a pcm? Why not make locksmith mechanics? Who is going to pay the extra cost to have a locksmith come in to do a transmission program? Small shops and a lot of mobile mechanics will be out of business. Plus the cust to repair a car just tripled. Way to go. But the solution is in our hands, and no one wants to talk about it. This will not stop theft at all. Why all this nastf talk about aftermarket tools and no talk about the problem? Every time I bring this up everyone runs the other way and side with nastf, the issue is the law and this is only a rule. Law changes is what makes a difference not a new rule to screw the honest hard working individuals. I see this as a kill the low competitions so big business can profit more.

• 
  @SS-U233 ай бұрын

  👍

• 
  @Autodoc912 ай бұрын

  You're absolutely wrong If that's the case anybody can go by a km100 and steal your car that you think it's hard to steal😂 and the locksmith license is just a piece of paper anybody with 300 bucks you can get it and misuse it to cut keys by VIN and then come to your house and steal the car😂 This is basically the bridge and to fill in the gap between the people who steals cars and the actual security professional that does it for a living I like it it's amazing it's boring all these bumps and shade tree mechanics out of business because they actually mess up the car worse when they work on it then when we work on it from the get-go

• 
  @jorgemat80802 ай бұрын

  ​@Autodoc91 first of all to get key codes you need to be a licensed locksmithand have a nastf security credential. Second, would you explain to me how my next-door mechanic can replace my water damaged bcm without having to call in a locksmith and charge the custumer the extra 300 for the locksmith? It's all good on paper but in reality it's not going to work. Third, new tools coming out faster than you can type this message that does the same thing and are not complying with nastf. Forth, the only way car thieves are going to stop robbing cars is when the law changes and actually charge and jail criminals and thieves. Fifth, immobilizer tool manufacturers can also stop the theft by providing a 24 hours access to turn off any stolen tools. Sixt, the immobilizer manufacturers can also implement checks before activating tools. So this new nastf rule will only hurt the small machanic shops that don't have a vsp credential and raise the cost for car owners. Do please explain how it's going to stop thieves when you have 10 manufacturers joining but 50 popping up that are not joining?

• 
  @SS-U232 ай бұрын

  @@Autodoc91 If mechanics get their background checked and they get registered to do key programming, then NASTF will know who worked on a given stolen vehicle. The problem is that VSP license is impossible to get for some people.

• 
  @jorgemat80802 ай бұрын

  @@SS-U23 the question is how is this going to prevent thieves from using other tools to steal cars? And mechanics would just pass the cost to customer from what ever the locksmith or vsp holder would charge. It's hard for me to see how is this going to stop thieves. The only thing I see is the cost going up for consumers.

• 
  @kevinsutton55803 ай бұрын

  Illegal blackmail by non government organization. California Locksmith License requires a background check, $250.00 a yr License fee & requirement to validate vehicle ownership! A CLASS ACTION LAWSUIT IS IN ORDER!

• 
  @bigjohn75773 ай бұрын

  So does this require the J box to do this function? I have a 2012 expedition that needs an abs module and want to know what i need to get the PMI done. Any help would be greatly appreciated

• 
  @nickayivor84323 ай бұрын

  TOOL HUT USA SAM AND BRANDI Thanks for sharing it with us 👍 From Nick Ayivor from London England UK 🇬🇧 ⏰️ 06:52AM Good Morning