It OK to talk about what you are doing! It would be a lot .ore educational to a nubie, if you don't speak English use an AI translator.
@dirftboth205 ай бұрын
Agreed. This is a personal channel made years ago only to place longer vids for sharing with friends. This one was to remind a friend what we went over while he was in town. I never intended strangers to actually find or watch anything I post here. But, kinda ironically, some of my vids have 1000's of views without any promotion. I have a "real" channel where I talk and teach ( kzread.info/dron/2v6sYCEzc_dUtohg7KSvJQ.html ) that sometimes doesn't do as well as this vid! Perhaps I should abandon it and move here to teach reloading! Cheers, friend.
@freeandcriticalthinker443111 ай бұрын
No audio? Wtf
@dirftboth2011 ай бұрын
I wanted to make a vid to show a friend how easy it is and encourage others to get a reloading manual and get started. Cheers!
@augieh6146 Жыл бұрын
Never seen a young kid quite kill it like that
@dirftboth20 Жыл бұрын
She's a small person, for sure, but 27 y/o. Being 4'11" and 103lbs, I see where your comment comes from though!
@augieh6146 Жыл бұрын
@@dirftboth20 well that lady absolutely killed it
@srsatlaf4730 Жыл бұрын
I'm not buying one. At least until they come out with a factory threaded barrel and set of Tritium suppressor height sights.
@tedbaxter5234 Жыл бұрын
No roost, no dust: what on earth? Thanks for the video!
@dirftboth20 Жыл бұрын
Superb track prep. It's amazing to ride.
@leodegariolantaca1408 Жыл бұрын
Sir i have question to you what is 10mm pistol,
@bobmoore5242 Жыл бұрын
She's no heavier to the motorcycle than a wet seat. If you don't get the hole shot, it's over.
@StiffShot Жыл бұрын
I'm getting one next month on thanksgiving day sales.
@mr.noneyabidness Жыл бұрын
Although the process was just fine, my OCD is blazing hot right now. But thats just me, good work.
@dirftboth20 Жыл бұрын
I can imagine this vid would be frustrating! haha. For me, there's proper, methodical, precise rifle-accuracy reloading. Then there's pistol-going-to-the-indoor-range, to shoot at 10yds for a practice session. Mainly I wanted to make a vid to show a friend how easy it is and encourage others to get a reloading manual and get started. Cheers!
@KevinLopez-to1eo Жыл бұрын
How much does this setup cost?
@dirftboth20 Жыл бұрын
If you scroll down a few comments I put a link to a kit similar to what's in the video that will show you current prices. Plus you'd need dies for your chosen caliber. Looks like as of today it's running about $520
@ad21812 жыл бұрын
The walls look dangerous.
@dirftboth20 Жыл бұрын
As walls go they are nice. Convery belt wrapped tires. I actually have hit them and it's soft and cushioning.
@Karishmasharma5342 жыл бұрын
Is delivery available in India also ??
@dirftboth202 жыл бұрын
I don't know. Contact them at Seedsuperstore to find out.
@robfarris48492 жыл бұрын
I got mine yesterday!!😁😁😁😁
@TheMcpvideo2 жыл бұрын
I've been looking at one for a while now ✌️
@dirftboth202 жыл бұрын
I like it. It's a more ergonomic fit in the hand compared to my blocky and bulky Glock 20. It had failure to feed malfunctions, but S&W fixed it under warranty w/about a 2 week turnaround. If you like 10mm, I'd recommend it.
@jpg_sig102 жыл бұрын
@@dirftboth20 If I may ask, what was S&W's fix? Thanks
@dirftboth202 жыл бұрын
@@jpg_sig10 I didn’t get an explanation, unfortunately. The ramp looks like it was polished and chamfered to be a bit shallower right at the top. The chamber is now bare steel and looks like it had the black finish sanded off. The rounds fit a bit more loosely than before they worked on it.
@edquier402 жыл бұрын
Rotax is bad ass! I love my Knight framed Rotax, she is Wicked Fast!
@slammerr2 жыл бұрын
kzread.info/dash/bejne/aqKgqZp6iLS5qbg.html murder death kill
@Scott-xq2dm2 жыл бұрын
I have good results with Johnathan Green Black Beauty Ultra here in Michigan...
@dirftboth202 жыл бұрын
Right on. The more I get into this it seems the seed is less important than the work that goes into it. Staying on top of an aggressive fungicide program here is my weakness. I’ve lost the whole lawn a couple of times in the heat and humidity.
@coolruler8856 Жыл бұрын
@@dirftboth20 Wish I could have mine that thick , but lots of rain with hot humid nights thins out my lawn . That seed blend that you used is incredible, the distribution center is not far from me , but I wait till my drain pipes are added to my yard before I go your route .
@dirftboth20 Жыл бұрын
Mine does the same. I doubled my preventative dose of fungicides this year, and it helped. But my lawn is way thinner right now than in the vid. Just trying to keep some alive till next month so I don't have to do a total reseed. Let me know how you do!
@coolruler8856 Жыл бұрын
@@dirftboth20 I use very little chemicals seeing that my neighborhood has a lot of wildlife which I enjoy . When I first bought the house I had to be aggressive with Ground Ivy because it controlled the whole yard , now I just have a bit at the back . Rabbits 🐇 Birds & their Babies have claimed my whole yard even in areas I don’t expect them to be . Trying to get use to this new normal is taking time , but as kid that’s what enjoyed about being outside , lots of wildlife .
@davezike2 жыл бұрын
Cuba libré
@johnnyburgess2112 жыл бұрын
Mind your head on the corners of the high cupboards..... don't ask me how I know !! Ouch.
@johnnyburgess2112 жыл бұрын
How many corks !!! (Is there a prize for the closest guess??) Cheers.....
@thechosen58052 жыл бұрын
Incredible!!!
@johnnyburgess2112 жыл бұрын
Shouldn't you be driving around the track at the same time to keep the dust down. What goes on in the truck that needs all that water?
@dirftboth202 жыл бұрын
I suppose I could water the track a bit! The boxvan conversion is about completed. Shane, who has now done 4 of them pointed out that the pervious ones never had gray and black tanks that were too big, but sometimes were too small. Since we had to have them fabricated, might as well make the big. Plus, the gray water can be used to wash muddy trialbikes.
@johnnyburgess2112 жыл бұрын
@@dirftboth20 Hi Mike. You will have to make a video of the truck when it is finished. Cheers.
@ogsan12962 жыл бұрын
Where can I find this seed in Charlotte ? Thanks. Beautiful yard !!!!!
@dirftboth202 жыл бұрын
I don't know where you could get it locally. I found it online at seedsuperstore.com And thanks!
@johnnyburgess2112 жыл бұрын
Under the floodlights the track looks like polished concrete. Is it Carolina clay? Did you win? Watching on my phone I couldn't see the chequered flag!
@dirftboth202 жыл бұрын
It's red Carolina clay. I was able to win that one. Last lap pass!
@johnnyburgess2112 жыл бұрын
@@dirftboth20 I have watched it again (and again) and have spotted the flag waving from the hut above the start/finish line. Well ridden!
@vinniecorsetti52622 жыл бұрын
Sounds dialed in
@jamesvatter57292 жыл бұрын
Not crimping?
@dirftboth202 жыл бұрын
There is a taper crimp. The bullet seating die is also the crimping die. It's a two in one.
@JESUS-js9oe2 жыл бұрын
Just beautiful lawn
@dirftboth202 жыл бұрын
Thanks, man! It looks good that time of the year. August heat kills it around here though.
@timothysanders4312 жыл бұрын
I haven't shot mine yet , but it looks like it will get the job done . Punting my RIA 10mm paper weight. Malfunction , failure to feed and eject POS.
@dirftboth202 жыл бұрын
I really like the ergonomics. I've been shooting the Glock 10mm G20 since 1992, and this is a way more comfortable hogleg. However, it's failing to feed with multiple full-power loads. Based on my experience, my guess is it came with too little recoil spring. I debated troubleshooting it myself, but after seeing others online having the same problem decided to ship it to S&W for warranty. If they shipped with spring for reduced power 10mm loads, the fix should be easy and I expect a really nice piece.
@timothysanders4312 жыл бұрын
Do you use magtec, S and B ammo?
@dirftboth202 жыл бұрын
No. Two different handloads, Doubletap, and Underwood so far in this 10.
@donnieates2 жыл бұрын
Can you please list the press and other tools you used.
@dirftboth202 жыл бұрын
Speer Reloading Manual Rock Chucker Supreme Press .17-.60 Debur Tool M500 Mechanical Scale Uniflow-III Powder Measure Hand Priming Tool Universal Case Loading Block Hex Key Set Case Lube Kit Powder Funnel Speer Reloading Manual You can see all this together in a kit here: www.rcbs.com/rcbs-kits/rock-chucker-supreme-master-reloading-kit/16-9366.html On top of this you'll need shell holders and reloading dies for each cartridge with some exceptions (10mm/40 s&w use the same dies for example) I mixed in some other brands of items in the video, but the above kit demonstrates what's needed to get started. The reloading manual is the most important. Reading it over will go a long way to explaining what's needed and how to set it up. Cheers!
@donnieates2 жыл бұрын
@@dirftboth20 Awesome. Thank you.
@bonedar3332 жыл бұрын
whats a lap time for the bike seeing 12.3 for a kart
@dirftboth202 жыл бұрын
Just taking some hand-timed laps off of the vids, 13.8-14.2 in the Pro class.
@wafllc41632 жыл бұрын
Beautiful.
@buddygrizzle2 жыл бұрын
I will squeak that beak so hard!
@buddygrizzle2 жыл бұрын
Changed my miiiiiiinnnnddddd!!!!
@buddygrizzle2 жыл бұрын
Definitely, definitely stabby at the beginning. Definitely stabby.
@slammerr2 жыл бұрын
Amateur hour.
@slammerr2 жыл бұрын
Good job Hardball!
@45triplex793 жыл бұрын
Love that dog!
@buddygrizzle3 жыл бұрын
What a good boy. Happy birthday, Valentino. ❤️❤️❤️
@seleldjdfmn2214 жыл бұрын
Please remember me at 10 subscribers. what music do You like? Oh, and happy hug your cat day! :O
@menacingjackal59905 жыл бұрын
Nice Riding !
@brooksstevenson83586 жыл бұрын
Good old mike dillion showing how your supposed to get around Coleridge
@knifeman11227 жыл бұрын
auto stryker
@MGreen-vz6yb8 жыл бұрын
Maybe it's geared a little high?
@dirftboth208 жыл бұрын
+Merwin Green It was actually geared too low, believe it or not. Once the Rotax gets into the 600cc range, turning it over about 8200rpm doesn't build more power. And on a smaller track like Coleridge Speedway, the laptime is easier to do with the engine lugging. 7700 max revs gives the best laptime. Thanks for watching!
@dirftboth2010 жыл бұрын
Clay treated with calcium chloride. The small holes are put in with a sheepsfoot roller.
@jf9915110 жыл бұрын
what the hell is with the track surface ? please explain the holes.. That pipe is loud. I like it.
Пікірлер
It OK to talk about what you are doing! It would be a lot .ore educational to a nubie, if you don't speak English use an AI translator.
Agreed. This is a personal channel made years ago only to place longer vids for sharing with friends. This one was to remind a friend what we went over while he was in town. I never intended strangers to actually find or watch anything I post here. But, kinda ironically, some of my vids have 1000's of views without any promotion. I have a "real" channel where I talk and teach ( kzread.info/dron/2v6sYCEzc_dUtohg7KSvJQ.html ) that sometimes doesn't do as well as this vid! Perhaps I should abandon it and move here to teach reloading! Cheers, friend.
No audio? Wtf
I wanted to make a vid to show a friend how easy it is and encourage others to get a reloading manual and get started. Cheers!
Never seen a young kid quite kill it like that
She's a small person, for sure, but 27 y/o. Being 4'11" and 103lbs, I see where your comment comes from though!
@@dirftboth20 well that lady absolutely killed it
I'm not buying one. At least until they come out with a factory threaded barrel and set of Tritium suppressor height sights.
No roost, no dust: what on earth? Thanks for the video!
Superb track prep. It's amazing to ride.
Sir i have question to you what is 10mm pistol,
She's no heavier to the motorcycle than a wet seat. If you don't get the hole shot, it's over.
I'm getting one next month on thanksgiving day sales.
Although the process was just fine, my OCD is blazing hot right now. But thats just me, good work.
I can imagine this vid would be frustrating! haha. For me, there's proper, methodical, precise rifle-accuracy reloading. Then there's pistol-going-to-the-indoor-range, to shoot at 10yds for a practice session. Mainly I wanted to make a vid to show a friend how easy it is and encourage others to get a reloading manual and get started. Cheers!
How much does this setup cost?
If you scroll down a few comments I put a link to a kit similar to what's in the video that will show you current prices. Plus you'd need dies for your chosen caliber. Looks like as of today it's running about $520
The walls look dangerous.
As walls go they are nice. Convery belt wrapped tires. I actually have hit them and it's soft and cushioning.
Is delivery available in India also ??
I don't know. Contact them at Seedsuperstore to find out.
I got mine yesterday!!😁😁😁😁
I've been looking at one for a while now ✌️
I like it. It's a more ergonomic fit in the hand compared to my blocky and bulky Glock 20. It had failure to feed malfunctions, but S&W fixed it under warranty w/about a 2 week turnaround. If you like 10mm, I'd recommend it.
@@dirftboth20 If I may ask, what was S&W's fix? Thanks
@@jpg_sig10 I didn’t get an explanation, unfortunately. The ramp looks like it was polished and chamfered to be a bit shallower right at the top. The chamber is now bare steel and looks like it had the black finish sanded off. The rounds fit a bit more loosely than before they worked on it.
Rotax is bad ass! I love my Knight framed Rotax, she is Wicked Fast!
kzread.info/dash/bejne/aqKgqZp6iLS5qbg.html murder death kill
I have good results with Johnathan Green Black Beauty Ultra here in Michigan...
Right on. The more I get into this it seems the seed is less important than the work that goes into it. Staying on top of an aggressive fungicide program here is my weakness. I’ve lost the whole lawn a couple of times in the heat and humidity.
@@dirftboth20 Wish I could have mine that thick , but lots of rain with hot humid nights thins out my lawn . That seed blend that you used is incredible, the distribution center is not far from me , but I wait till my drain pipes are added to my yard before I go your route .
Mine does the same. I doubled my preventative dose of fungicides this year, and it helped. But my lawn is way thinner right now than in the vid. Just trying to keep some alive till next month so I don't have to do a total reseed. Let me know how you do!
@@dirftboth20 I use very little chemicals seeing that my neighborhood has a lot of wildlife which I enjoy . When I first bought the house I had to be aggressive with Ground Ivy because it controlled the whole yard , now I just have a bit at the back . Rabbits 🐇 Birds & their Babies have claimed my whole yard even in areas I don’t expect them to be . Trying to get use to this new normal is taking time , but as kid that’s what enjoyed about being outside , lots of wildlife .
Cuba libré
Mind your head on the corners of the high cupboards..... don't ask me how I know !! Ouch.
How many corks !!! (Is there a prize for the closest guess??) Cheers.....
Incredible!!!
Shouldn't you be driving around the track at the same time to keep the dust down. What goes on in the truck that needs all that water?
I suppose I could water the track a bit! The boxvan conversion is about completed. Shane, who has now done 4 of them pointed out that the pervious ones never had gray and black tanks that were too big, but sometimes were too small. Since we had to have them fabricated, might as well make the big. Plus, the gray water can be used to wash muddy trialbikes.
@@dirftboth20 Hi Mike. You will have to make a video of the truck when it is finished. Cheers.
Where can I find this seed in Charlotte ? Thanks. Beautiful yard !!!!!
I don't know where you could get it locally. I found it online at seedsuperstore.com And thanks!
Under the floodlights the track looks like polished concrete. Is it Carolina clay? Did you win? Watching on my phone I couldn't see the chequered flag!
It's red Carolina clay. I was able to win that one. Last lap pass!
@@dirftboth20 I have watched it again (and again) and have spotted the flag waving from the hut above the start/finish line. Well ridden!
Sounds dialed in
Not crimping?
There is a taper crimp. The bullet seating die is also the crimping die. It's a two in one.
Just beautiful lawn
Thanks, man! It looks good that time of the year. August heat kills it around here though.
I haven't shot mine yet , but it looks like it will get the job done . Punting my RIA 10mm paper weight. Malfunction , failure to feed and eject POS.
I really like the ergonomics. I've been shooting the Glock 10mm G20 since 1992, and this is a way more comfortable hogleg. However, it's failing to feed with multiple full-power loads. Based on my experience, my guess is it came with too little recoil spring. I debated troubleshooting it myself, but after seeing others online having the same problem decided to ship it to S&W for warranty. If they shipped with spring for reduced power 10mm loads, the fix should be easy and I expect a really nice piece.
Do you use magtec, S and B ammo?
No. Two different handloads, Doubletap, and Underwood so far in this 10.
Can you please list the press and other tools you used.
Speer Reloading Manual Rock Chucker Supreme Press .17-.60 Debur Tool M500 Mechanical Scale Uniflow-III Powder Measure Hand Priming Tool Universal Case Loading Block Hex Key Set Case Lube Kit Powder Funnel Speer Reloading Manual You can see all this together in a kit here: www.rcbs.com/rcbs-kits/rock-chucker-supreme-master-reloading-kit/16-9366.html On top of this you'll need shell holders and reloading dies for each cartridge with some exceptions (10mm/40 s&w use the same dies for example) I mixed in some other brands of items in the video, but the above kit demonstrates what's needed to get started. The reloading manual is the most important. Reading it over will go a long way to explaining what's needed and how to set it up. Cheers!
@@dirftboth20 Awesome. Thank you.
whats a lap time for the bike seeing 12.3 for a kart
Just taking some hand-timed laps off of the vids, 13.8-14.2 in the Pro class.
Beautiful.
I will squeak that beak so hard!
Changed my miiiiiiinnnnddddd!!!!
Definitely, definitely stabby at the beginning. Definitely stabby.
Amateur hour.
Good job Hardball!
Love that dog!
What a good boy. Happy birthday, Valentino. ❤️❤️❤️
Please remember me at 10 subscribers. what music do You like? Oh, and happy hug your cat day! :O
Nice Riding !
Good old mike dillion showing how your supposed to get around Coleridge
auto stryker
Maybe it's geared a little high?
+Merwin Green It was actually geared too low, believe it or not. Once the Rotax gets into the 600cc range, turning it over about 8200rpm doesn't build more power. And on a smaller track like Coleridge Speedway, the laptime is easier to do with the engine lugging. 7700 max revs gives the best laptime. Thanks for watching!
Clay treated with calcium chloride. The small holes are put in with a sheepsfoot roller.
what the hell is with the track surface ? please explain the holes.. That pipe is loud. I like it.