I strive to make useful HOW-TO-VIDEOS, as well as content highlighting AWESOME PRODUCTS that I have personally used and recommend. My recording style will NOT waste your time with unnecessary fluff and fillers. I focus on the important details and bring a real-world perspective to the specific product or task at hand. I also do my very best to respond to as many comments as possible. So if you ever have a question, just ask!
I'm always open to COLLABORATION with other KZread creators as well as product manufacturers, and I'm ALWAYS open to suggestions for future videos! I do a lot of repairs, projects, and DIY crafts around the house, and I try to post relevant content as opportunities present themselves. I'm a pretty handy guy, so I like to share my experiences in hopes that they can be of benefit to others later on down the road.
In the meanwhile, thanks for hanging out, and I hope to see you soon!
Пікірлер
helpful! thanks
Did you spray painted the grill or had it done? What type of paint was used?
It’s been a while, but I made a short video from when I did it.. kzread.info/dash/bejne/e5-OrNadlrmufqg.htmlsi=TLAnnc119i3HBw9I
Hello Sr. I am trying to biuld a roll off system in to my truck could you please share the information we’re you get your truck done thanks 🙏
Thanks, you saved me big time!
Did this negatively impact overall ride quality? Thanks for the vid!
Great video. I have had a Tidal 55 for two years, it started to make a very loud clicking noise, so I replaced the motor. Still had the noise the next day. I think the tip you mentioned about removing the lower blue dial will do the trick. I didn't even know that thing was there- it was dialed down to minimal water flow. I removed it, and am trying the filter again. So far so good.
Great video. My purchase didn’t include specific instructions related to the fuses. Prior to the video I spent an hour try to figure it out. Post video it only took me 15 min!!
Great video! We sell these products in Pennsylvania and they offer a lot of benefits at a great cost. Your first stove was a great choice!
Thank you for the amazing video. I have a question about the dishwasher vent. Mine comes out of the sink top like where I would add like a soap dispenser or something. I want a new sink and would like to get rid of vent. Do I just get that pipe and have the water just go directly into the drain?? That seems so simple like why did they need my make my vent come out of the sink haha
So I’m not an expert on these things, but my Dishwasher has a heat/steam vent that comes directly from the front of the unit itself. The pipe I installed in the video was the actual water drain for the dishwasher so that dirty water is pumped down the drain after the cycle is complete. If your dishwasher was some sort of piped or external vent, you would have a more unique situation than mine..
Thx this was very helpful !!!
I’m glad it helped out!
Lost the Chipboard washer-Oh the calamity! Where can I buy a chip board washer?
Hey man, do you know why my app is not subtracting the par value in my machines when someone buys what I know is a drink but in my app all pars are full. Can you help tnx. New to this
Also I've set the mdb from 1 to 20 left to right top down
Thank you so much for the video and the explanation. Please can you share how do you get the 'On Hand' values of the item on your app? Is it dynamically updated after every purchase from the vending machine? I understand that the 'Par' value is based on the rings of the coil, and you can set it based on coil that you have.
Wow! Your review is so clear and straight to the point. Answered all my questions about this product. Will definitely check out your other videos. Thanks! 🙂
how did the paint hold up?
Thanks for the video but mine is still has a slight leak back into the bowl this is garbage Kit there is no reason for it to have a slight leak!
I can buy this truck at my local dealer with 10k miles for $38 k, trying to decide if I should
I wanted to do that with my Maverick when I 1st got it, but couldn’t find a good watch to do it
I did the same thing am right now trying thank you man
This has to be the most thorough video I've ever seen.
Weird question but does the stove get hot enough to cook on? Looking at this for a backup in case we lose power during the winter. (As we often do)
I haven’t temp checked the top, but I know it gets so hot that you can only graze your hand or finger on it very briefly due to the heat. I’m quite sure it would boil water once up to temp. Unfortunately I won’t have mine fired up again until the fall..
@@WesleyAllenNC haha ok. Overall are you happy with it?
@@JlKaz1Yes, I love it. It’s also my first and only wood stove, but it does exactly what I wanted it to do. (Get the lower level of the house to around 73 degrees) I also really like that you can sit in front of it and load wood without being so low to the ground.
Looks great! Thanks for posting!
Thanks for the video! Do you still love this rower? I'm recovering from double hip replacement surgeries and need low impact. Is this ideal?
Yes I still have it and use it from time to time without issues. I just wish it had a little bit more tension on the max end.. But rowing is also meant to be a cardio type workout as well, so doing enough repetitions still does the trick.
You saved my ass today man. Thanks for a straightforward and accurate video.
What was the size of the cutout in the lid of your tank? I have a similar situation and was wondering how long the actual led is
I read you're not supposed to bury these and they're supposed to be 2 inches above ground level. The whole goal is for it to be easy and quick access.
I used to run big Stihl saws; so I know what power is like. Already kinda far down the EGO rabbit hole; when I needed a chainsaw; my first thought was an EGO. I had very high expectations; and was not disappointed. I never thought for one minute; "Why didn't I get a gas saw. Impressive performance. I liked it so well; that I've purchased three more; two of them with much bigger powerheads. The other one I got; I wanted to try the 14" one. I happened to see an ad for a used one for a good price. I was surprised when it arrived that I hadn't received what I purchased. They mistakenly shipped me another 1800; and I didn't call to complain 😂.
Interesting. Thankfully I've never experienced this issue.
Thank you buddy. Very informative 👏
I've found my inlet, wondering how far away were the two openings, ie. the distance between the inlet and outlet covers. Thank you for the video BTW. :)
Hey thanks! My lids are probably 4-5 feet apart.
Good video. To the point with nesesary information. No stupid, annoying, distracting music either. Just a helpful vedio to save time, energy, and money while trying to figure out what to purchace. Appreciate it.
where did u get ur grill frm?
It’s the factory grill, I just painted it. There’s another video on my channel showing how I did it..
where did u get ur grill frm
It’s the factory grill, I just painted it. There’s another video on my channel showing how I did it..
When I plug in my fuse is it ok too use both 10 amp fuses because mine didn’t come with a 15 amp one
Pulling on a torque wrench and not knowing the star pattern😂
What if the bulb breaks smh
Map light
Hello this is great information. Do you have contact info? I have questions about purchasing machines. I’ve been getting a lot scams when trying to buy. Not sure where to look. Thank you!
⭐️⭐️⭐️⭐️⭐️
YOURE A FUCKING HERO! Saved me brotha
100x better video than some others out there! Thank you bro
My neighbor taught me how to do this many years ago. He is head of maintenance at the place where he works. Anyway the other thing he showed me to do is put a flat washer on the bolt before the rubber washer inside the tank. Now I know these things are in water all the time, so it just means to change them a little more often. Some of the rubber washer sets are convex on both sides, so the extra flat washer made the seal better way better. My Korky only came with the set of 3 tank to bowl hardware and my toilet has 3 holes. So I had to go buy another set of 3 just to have enough pieces.
I got these so so much better and thanks for helping
Awesome investigation work and there was chewy
Thank you for the video, it was a lot of help to me.
Great video
Two questions. One can you install this on 2nd gen Tacomas? Second is can you lock your keys in the cab with this? I have one on my ford and love that feature. I never carry my keys.
Ive seen active termites in a stump covered in snow
So helpful thankyou
So helpful
I’m 70 years old, bought it march 2021 already made more than 500000 rows my challenge is make 2000 rows between 42 to 45 minutes, I recommend it for me is great