Resin art and creations made by me. I try to teach you all my secrets and other tips I have discovered. Please let me know if you have any questions and let me know what you think!! Like, subscribe, and let me know else you would like to see me make for you. Thanks for watching.
Find me on: FB facebook.com/NoReasonJustResin
Instagram: instagram.com/NoReasonJustResin
Etsy shop: www.NoReasonJustResin.etsy.com.
Пікірлер
Oh my I love those!!!
@darlenejohnson2662 thank you!! Hope it works for ya
Straight to the point! Love it ❤ they came out beautiful, good job 👍
So I made gummy bear earrings and some of the arms didn’t turn out right
❤ love this, thank you so much for the idea. Now I need to find this in Aus. I'm inspired and super excited 🙏💜 thank you
@@144starlight8 I hope you can order some. Thanks for watching.
Thanks for this. I have shipped a couple large things and always said a prayer as it left. I, too, reuse shipping materials that I have received.
I used to ship 12" circular mirrors.. I don't anymore. Too much worry involved. Thanks for watching Tim! Hope it was helpful.
Can you list of things you used?
Where did you purchase the bubble beads in the container? I've ordered some online and I need more and would love that specific setup.
Amazon. It was a multicolored pack.
Did you use deep pour resin?
No. Let's Resin, their normal 1-1 ratio
Where did you get your molds and corks?
My sister ordered these from Amazon.
So pretty. I used to use it on my nails years ago. I got mine in a pot. From the company. I love everything they sell
I am highly impressed with this product. But I ran out. Time to order more goodies!! On nails sounds epic!! Wow.
Those frames are *gorgeous* 🖤
Thank you. Was a little outside my comfort zone, first time doing anything like it.
I’m confused. Just a beginner. How do you remove with alcohol to clean up bleed lines if the resin has cured?
It's cleaning the alcohol inks spills.... not really sure if I understand your question..
can the alcohol spray be 99% or does it have to be 91%?
I think 99% would be good too, but I've never tried that. Gotta test it on one and see what happens.
Great tutorial! Thank you! They came out beautiful!
Thanks for watching and commenting!
Really cool!
Thank you!
Another beautiful set!! Would you mind if I asked what your first name is? Much love, Nat from Brisbane, Australia. ♥️♥️🇦🇺
Awee, you flatter me!! My name is Kim... Kimberly, when I'm naughty, lol. Thanks Nat!
Hi there… when you said you were doing blue and white pieces, then proceeded to pour clear resin… I was a bit confused… then even more confused when you poured white on top and poked them… but, once you demoulded them, I saw exactly why you did it a particular way… because they turned out beautifully… they are just adorable with their little cleanish tops and white bottoms!! Thanks so much for sharing! I’d love to see you do an ocean/beach scene. Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
The white pieces are basically the "white team." I just use white alcohol ink just to make them more fun and give them a cool effect. Thanks.
Wow… they are beautiful… so many colours!! Could you please tell us where you got the pen from? 🙏 Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
Thanks!! Wow Australia!??!!? solarcolordust.com/liquid-crystal-mood-paint-brushable-pen/
@@noreasonjustresin thank you so much! ♥️♥️🇦🇺
Because of your video where you burned your first batch, I placed an order for the pens. Haven't messed with them yet (just arrived yesterday), because I have a few other projects going.
Yeah, just be patient, and you won't burn it!! Haha. I have more ideas. I would LOVE to incorporate it into chess pieces, but I'm not sure how.. but it's on my mind. Thanks, Tim. Make sure to show me what you create!!
@@noreasonjustresin whatever I make will show up on my KZread channel.
Beautiful. Love them ❤❤❤
Thank you so much. These are soooooo fun!!! Definitely recommend everybody trying this product!! It's full of galaxy colors.
Do u use any other equipments? Like a blender wisp or measured cup and so on? If so how do u clean the stuffs after pouring? 😊
I had an electric mixer, but it didn't last. I must not have cleaned it properly. I use solo or Dixie cups for measuring and mixing. You can reuse them a few times if you take the sticks out. I don't use any special equipment... you can use masking tape to clean molds. It's no fun, but it's a part of it.
That's nice! Thanks!
Thanks for watching. I made more and just posted that. I used 2 part resin this time.
@@noreasonjustresin I'll check it out!
I love these but it's a hit or miss as my resin sometimes does its overflow in closed in molds. I've destroyed several of these molds trying. Any help or suggestions are very helpful.
Try a new resin and do not apply heat!! No flame or heat guns.
Where can we purchase the 91% alcohol? Is it rubbing alcohol?
I buy mine from Dollar General..
Isopropyl Alcohol
Where did you get the molds
My sister gifted them to me, from Amazon
Im new to resin too. Just started my channel.. i love the colors! May i ask where you got your mold? I would love to try.
Ordered from Etsy. Lots of gummy bear molds are available there. Have fun!! I make magnets, keychains, and barrettes with these bears.
Hello! I'm from Russia. What did you spray in a transparent jar to make beautiful waves?
91% isopropyl alcohol. Hi from USA
@@noreasonjustresin❤Thank you very much
They are all beautiful! Your video was great, getting ready to pour now!
Oohh I missed this comment, my bad!! Thank you so much, how did they turn out?
Do you find the glue holds. My husband is afraid they are going to come apart.
I use 2 part epoxy to attach them, no glue. No issues so far.
I would like to know how do you keep your Lego frame from leaking when you use if for mold making
I don't recommend using lego for mold housing.
Oh is it cause they don't work or the clean up is a pain?
@tenmeidesigns6478 pain to clean. You can use the 'design side' of a cereal box and hot glue. Use tape, sticky side up, as the bottom.
Omg I really appreciate you doing this, it’s exactly what i needed. Thank u ❤
You're welcome. I'm glad you watched!!
Thank you! This was very helpful!
Thanks for watching!!
This is a great video thank you! I’ve watched it at least 3 times and read all the comments. I’m still not clear on when to use the UV light …. Are you curing under the lamp between each coat or each application of a different color or just when you sprayed alcohol on the white? How long to you use the UV lamp for? Thank you!
I went ahead and tried it. Everything has worked like a charm except the cells in the white! I’ve tried with acrylic titanium white in resin and white mica powder in resin, 91% alcohol spritz and immediately cured. No cells ! 😢 Any ideas?
@epringle3769 I wonder if it needs to be a thick pigment paste. The UV light is to cure. Whenever I use it, I do a full cure, but I cut it out to save time for the video. I cure between layers. About 2-3 mins.
What is the purpose of the spray of alcohol?
It creates cells.
Where did you get the mold n cork. Great job
They were gifted to me, but they are from Amazon.
Love it
Thank you.
I was going to try this but now I’m not so sure lol!
I wouldn't unless it's a very shallow mold. You can make one with hot glue and the colorful side of a cereal box. Or use a plastic cup. I wouldn't do this again!! Nope.
What’s in the bottle, is it just acrylic paint?
It's alcohol ink. With a ball bearing to help shake it up. Squeeze it in the creases, let dry, then clean with a paper towel sprayed with 91% alcohol. Use a clean towel as needed.
Pretty
Thanks!! Even prettier in person.
i never heard of these before they are so cute! Where do u buy shaker molds?
There are a lot on Amazon. I bought this mold from there in a multipack. Then, I bought this mold solo on Etsy. Search shaker molds or quicksand mold. Have fun!!
Hey new subbie from fb! Looks amazing
Thanks for watching and subbing!
Do you mix resin & hardner when attatching the metal stopper top? Great tutorial!
Yes, mix your resin according to the directions, then use to attach the cork. Thanks for watching.
Great video. I like ur idea of using resin to attach the stoppers. I have been using B700 and a few have detached not sure if the faces were sanded flat enough but with the resin it seems that i would not need to have a perfectly flat face. Have you had any issues of the stoppers detaching after they cures?
No one has complained. I sold a lot and have given a lot to my family members. Resin attaches to resin best... I also test them. They are strong. So far, so good. Thanks for commenting.
Thanks that's perfect I will be using resin from now on
The glue trick is brilliant!!!
Thanks. It's better to do it than regret not doing it!! Know what I mean.
What is the secret to demolding these without breaking them???? I am struggling
Try to roll down the sides. They are difficult, especially when they're new.
@@noreasonjustresin Would it help to spray some soapy water inside the mould… or is not possible to get soapy water in there? I’ve never done chess pieces but I know it helps heaps with other moulds! ♥️♥️🇦🇺
@@mattersofthehartbynat8815 I would try to spray 91% alcohol to break the suction. I wouldn't try soapy water becuz it seems too messy to clean and dry, too much work. But that's just my thoughts.
thank you
You're welcome
Thank you so very much! And I love how fast your videos are!
Thanks. I'm glad. Long ones just aren't my thing... so I appreciate that.
Bellissimi❤anche io ho preso lo stampo,li farò in questi giorni...quanta resina occorre per uno stampo?
I don't understand. It's not translating. Sorry.
beautiful can you use artificial flowers?
Thanks. I don't see why not, but I personally never have tried them.
Oh, just a word of advice when using roses like that, if you soak them in resin before pour the resin in there, it will cut down on the air pockets… like dip your rose over and over again and then put it in your mould… then fill up like normal … it’s helps soooo much…..
Great advice indeed!! I'm discovering this with my larger globe molds... those gave me some trouble with bubbles.
This is great! Just made mine last night! Thank you now I know how to finish them❤
@@kandycebryson4212 you’re welcome! Glad it helped!