Пікірлер

• 
  @thejunkhustleАй бұрын

  I'd give this video a million likes if I could. Never seen a connector like this and this video was damn helpful. Many thanks!

• 
  @comochinganconestoАй бұрын

  Mine is down all the way but it won't release, any pointers?

• 
  @steveho98842 ай бұрын

  I wish it had a vaccum attachment to shopvac

• 
  @6atlantis5 ай бұрын

  I didn’t know the table could go on the belt sander, I thought it was supposed to go on the disc.

• 
  @catalinanguyen65915 ай бұрын

  You did a good job on this I’m late and not sure if you read this. I’m planning to replace mine soon. Thank you

• 
  @jackharding988 ай бұрын

  Thank you, exactly the help I needed. I appreciate it.

• 
  @wellnessotr9 ай бұрын

  Thank you. I fought with mine for an hour. 😤

• 
  @alejandroguzmanmendez408710 ай бұрын

  Por qué cuando cambias todo el equipo del molino al momento de conecta no trabaja y el voltaje es de 215 es un molino grinmaster

• 
  @aaaa195311 ай бұрын

  Your video really helped even after all these years, Thank you

• 
  @frederickfrei828611 ай бұрын

  To anyone that can help !! I just picked up a used 2017 Grindmaster 875. I Pulled the burrs off to clean them. When I ran my finger across the teeth they are smooth very smooth. Are they supposed to be more jagged or not ? I also want to know if they can be sharpened ?

• 
  @TonyKomaMusicSweden Жыл бұрын

  Damn u can fit 8” from the jump in the Miata-doors? NICE!

• 
  @joehiatt1992 Жыл бұрын

  Same as the Wen just diff color

• 
  @stephanienassman1849 Жыл бұрын

  " A well built machine " huh, after you wiggle the belt assembly and there is about a half inch of play in it ? You obviously do not have a clue about what you are talking about. With a 4.3 amp motor this is NOT any type of an upgrade a (as you say). This thing is an absolute piece of garbage but I'm sure you have found that out by now at this point.

• 
  @genesclean1 Жыл бұрын

  That's some motor...

• 
  @strayblackcatsmeow Жыл бұрын

  Just bought one. List price currently $134.99 but sale was $109.99. Table is solid when mounted to the belt on mine. Would have preferred that they did not premount the 80 grit disc but belt change is easy. Most of the noise is the paper belt against the painted back plate. Before using, I use DuPont teflon and silicone lubricant on the plate and wipe the excess to minimize transfer to roller. The result is much quieter operation and less drag under pressure. Very happy with it so far.

• 
  @roddydykes7053 Жыл бұрын

  Wonder what a good alternative to these are now that they’re gone

• 
  @purvastalbert9393 Жыл бұрын

  Thank you very much for a great product review. I just purchased this sander yesterday. I needed a sander for my small projects also I do not have work shop so this one is very compact and mobile light weight. I looked at the larger belt and sanders however right now it is not cost effective. I set it up and it works for what I needed it for.I am pleased with this product. FYI I have a small shop vac I found out that the vacuum hose does fit in the exhaust hole for the saw dust removal. The hose is about five feet long it is long enough to keep the saw dust away from you. Attach a regular sock size depends on you and now you are able to collect the saw dust. Keeping your site clean. It's just a thought. Again thank you for your review. Purvas

• 
  @jamesmatushin5457 Жыл бұрын

  My man coming in clutch

• 
  @bodhi974 Жыл бұрын

  Hmmm. I’ve been looking at that very sander. I make. Crab snares and used wire cloth and sanding the burrs has cut down my production time. I am going to pick one up and see how long it last. My one inch belt sander burnt up pretty quick. This looks like it may fit the bill.

• 
  @BBQ1953 Жыл бұрын

  Excellent set up & review video. No excessive repeat of information and objective input on the good and bad of the sander. Thank you.

• 
  @InkyDani Жыл бұрын

  Thank you

• 
  @MichaelSmith-cq4zk Жыл бұрын

  Just seen this and it is a year old how do you like it ? I am looking at getting this same model.

• 
  @taylorsmith2442 жыл бұрын

  Thank you, this video saved me a lot of time and frustration with these connectors!

• 
  @johnlemons90142 жыл бұрын

  I’ve been thinking about getting one myself. Thank you for the review and your time.

• 
  @PutUp3652 жыл бұрын

  Time for an update

• 
  @colemahaney42082 жыл бұрын

  looks exactly like a lot of other brands

• 
  @smeliscave2 жыл бұрын

  nice liquid dnb at the end, like and sub to you

• 
  @jfssparky2 жыл бұрын

  So belt drive then

• 
  @jfssparky2 жыл бұрын

  Does it have a direct drive motor? Or belt drive doesn't say in specs.

• 
  @michaelwray43592 жыл бұрын

  Thank you very much sire I’m going to get one

• 
  @djaspurh2 жыл бұрын

  Good review. Thanks

• 
  @AXNJXN12 жыл бұрын

  VEEEEErrry weird what HF has done. From this video in 2021, they have since REDUCED the motor size yet again for the exact same model (#(20106E-B) and now outfit these with a lower 3.5Amp motor... Unfortunate.

• 
  @TurboDieselJeep2 жыл бұрын

  I just bought one on sale $30 off so $109. I would rather a older Craftsman unit but this should fit the bill for now. I have yet to open it and wanted to see some more review videos of it being worked. You are right, its a lower amp motor in the newer version. Not happy. May just return it and find something better to hold on to.

• 
  @garyanstey54712 жыл бұрын

  Let's see the Miata!

• 
  @bradleytuckwell48542 жыл бұрын

  Nice review mate thanks

• 
  @petebusch90692 жыл бұрын

  Why don't they give you 2 tables?

• 
  @henrysgrecci36332 жыл бұрын

  Excellent video. Extremely thorough. Thank you!

• 
  @georgecurtis64632 жыл бұрын

  I just bought one on sale yesterday. I'm super picky but at the same time I understood I was not getting a super tool. Well, today I unboxed it and played around with it. I found two so called defects. One was one of the table bolts that holds it on to the bracket was not tight. So I had to tap it out correctly and now it is tight. The other is the hole or threads for the tightening device or knob for the table bracket was made at an angle. But for now, the issue may not really be an issue as far as my use expectations. Otherwise I will drill it out straight and redo the threads. The slight wobble in the table is due to the pivot pin being loose in the hole and the bracket not being flush to the housing. Again, maybe not much of an issue but fixable. Otherwise, I tested it out a bit and it can handle anything I expect it to do for me. The only thing that irritates me, just my thing, is that there is no place to wrap the cord around so it's not flopping around and something to hang or secure the miter gauge. Just me. There is room on the belt side so I will just figure something out. Anyway, again, I'm unusually surprised and happy with this unit.

• 
  @D703402 жыл бұрын

  Good review, but this thing is way to flimsy for what i need it for.

• 
  @joshuathurber932 жыл бұрын

  I don't own one yet, but honestly I like the central machining one better. you can modify the dust port and a few other things on it to make it better. I like the fact that the table has ridges on the central machine one it makes me think it would be better suited for sharpening thin objects if you know what I mean they can dig into the region so you can set the angle based on the ridge you just got to adjust its length out. I do like the initial build quality of this one better, but honestly I like the ridge table over the smooth table for what I need to use it for. But I've never really used one so, I mean this is all in my head right now.

• 
  @patrickdolan.2 жыл бұрын

  Put a little pressure on central machine one while sanding and you can stop it. Not enough power

• 
  @colemahaney8802 жыл бұрын

  there are 5 different company`s that sell that same one

• 
  @terencemcculloch32942 жыл бұрын

  And many more.

• 
  @blazetherainwing13702 жыл бұрын

  One of these jumped out of a bush and did this to me

• 
  @castironkev2 жыл бұрын

  Helpful review! I paid up a bit and ordered the bucktool 3/4 hp because I do some light metal work

• 
  @Vitestrategy2 жыл бұрын

  Thank you!

• 
  @pnw67292 жыл бұрын

  Thanks! Very helpful overview.

• 
  @prince87x2 жыл бұрын

  Great video thanks!

• 
  @mmcnew12 жыл бұрын

  Thx. Keep us posted as you use this tool. At the time I am viewing this (8/16/21) there are only 9 reviews on the HF website. Eight of which are 5 star and one 4 star.

• 
  @trekzilladmc2 жыл бұрын

  I like my sander as well. I didn't actually know you could mount the table to the front of the belt. I thought the only part you could mount was the L-shaped sheet metal platform it came with.

• 
  @garyanstey54713 жыл бұрын

  "Thank you camera"..Hahahahahaha!

• 
  @gamer21013 жыл бұрын

  Thanks. I was wondering how this and central machinery were different

• 
  @nickthornquist11183 жыл бұрын

  I screwed up and took apart the grind adjustment dial and now can't get it back on correctly (for example it doesn't click when turning and turns past the far left and right settings). Any thoughts on how to fix that issue? Theres a pin on the inside, but i can't get it to stay in the right position :(